Plans for Window 8 RT support ?

Any plans to release a Jabber application for Windows 8 RT ?

We cannot speak to roadmap questions on the public forums. Please re-ask this question in an NDA-protected medium such as the Collaboration User Group or your Cisco SE.

Similar Messages

Plans for Windows 8

Hi!
How are the plans to launch the Edge Inspect for Windows Phone?
Thanks a lot!
Best regards,
Ana Laura Gomes

Hi Ana,
We are still keeping an eye on Windows Phone market penetration ( http://wmpoweruser.com/statcounter-data-shows-windows-phone-overtaking-blackberry-in-us-by -november-2012/ ) to determine when and if we will create a device client specifically for it.
Our question to you and others about it - would your majority use case be synchronized browsing, or do you make much use of screenshots and remote inspection?
Thanks,
Mark

ACS for WIndows what OS supported?

Hi All,
what are the Windows Operative Systems supported to run ACS? Any CCo on it?

The Cisco documentation states that ACS 3.3 runs on Windows 2000 server. Here is a URL with the information:
http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_tech_note09186a008009462a.shtml
HTH
Rick

Any plan for Windows 7 64-bit Video Driver for T60?

I have Win 7 x64 installed, and I'm using the Vista video driver (which I believe is 32-bit). I'd prefer to have a fully supported 64-bit Windows 7-qualified driver. Is there any plan to provide one in the near future? Thanks!

eliaskok wrote:
Did you use System Update from Lenovo?
You can download it from here: http://www-307.ibm.com/pc/support/site.wss/tvsu-update.html
there is no new video driver for the T60.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Any plans for CFE on Windows 7 OS

At present AccAD Windows Client is support ONLY u201CWindows XPu201D or u201CWindows Server 2003u201D operating systems, Any plans for Windows 7 enterprise.
Thanks & Regards,
RajaMurugesan

Yes, we are planning to support Windows 7 in the next version of AccAD (2.3) which will enter ramp-up Q4 this year.
Details about subscribing to the 2.3 Ramp Up program will also be provided.
-Zeev

Windows and OSX support for Proximity

Is there an install for Windows and OSX support for Proximity.
I have upgraded all of my endpoints to TC7.1.2. (SX, C Series, EX) and Proximity is working great however most of my users bring laptops to meetings not iOS devices.
Any timeframe ?

@dshumake; nice try ;) (thanks for being forgiving with us)
@ablaisdell; agree!
@fcosgrove; we are currently starting a limited trial for Win and Mac clients (EFT, part of TC 7.3). The main feature for the laptop client is sharing FROM your laptop to the video endpoint, so you can skip the cable, dongles etc in the room.
We do have plans for supporting call control and content receive to the laptop as well, but that's later.
The first PC & Mac version has target for first half 2015, but is subject to change (as in: not yet committed).
Br,
Henrik

Support for Windows Server 2012R2 Hyper-V

Windows Server 2012 R2 is officially available from last week. What are the plans for 2012R2 Hyper-V Support on UCS platform /B200M3 servers/? Also Nexus1000V for SCVMM 2012R2?

Hi,
We have Windows Server 2012 R2 (x64) configured as Hyper-V Servers running a Cisco UCS. We use Cisco UCS B200 M3 Blade Servers with a VIC 1240 (including a Port Expander). It works just fine. I have also succesfully tested VM-FEX and SR-IOV.
I must add that there are only 2012 drivers, although they work properly. In case you have a FlexPod and use iSCSI. NetApp does not have a DSM driver (MPIO) to support 2012 R2 yet, so you have to use the Microsoft DSM driver.
I am also waiting for Cisco and NetApp to release updated drivers that officially support Windows Server 2012 R2.
I hope this information is usefull to you. Please let me know if you have any questions.
Boudewijn

Apple creates Android Music App, but no love for Windows

Apple is making its first Android app - Business Insider
Now even Apple is getting into Android apps, but alas, no plans for Windows Phones. I understand myself, that maybe WP isn't the most widely used platform. I also understand that some customers have issues with untimely updates. One could see why lack of support would lead to further lack of support. Still though, I personally wish there was some way for WP to rise above its own ashes and become more relevant, implemented, or at least more understood. Just goes to show there is more co-mingling between rivals these days. And don't forget the rumors of Apple's own version of Google's Street View.

Open the music player, touch and hold an artist, album, or song; a menu will pop up and one of the options is to add to a playlist.

Jabber for Windows - Outlook Meeting integration issue/questions

Hi,
A couple of questions if anyone else has experienced or can answer:
1. When you turn on Jabber it appears in the trace file to create a transitionlist of meetings in your calendar for the next four hours. Eg if meeting 8-9 it will show 8:00 BUSY
9:00 FREE
and this works ok. This transitionlist also seems to update each time a status change occurs from what I have observed.
The problem we seem to have is if I open Jabber at 7.45am and have a meeting 8 - 9 then it shows "In a meeting", then if I create a meeting at 9.15am for 10am-10.30am, the meeting status does not change as it seems to operate of the four hour transitionlist. I have the setting in the CUPS server for exchange sync to happen every twenty minutes, but this does not seem to update.
I'm be focussing on the wrong area but basically not all calendar appt's update status in Jabber, especially the one's created within the four hour pperiod.
2. To have the presence status of a person in an Outlook email address field, do you need 2010 or does it work with prior versions, we currently operate 2003. I have configured the SIP component in AD, but no status or click to call facility from Outlook.
Thanks in advance
Mal

Hi Mal,
Thanks for your post. Issue (1) sounds like a configuration issue in your setup. Please open a TAC case for further assistance.
Regarding (2), Jabber for windows does noot support Office 2003. List of supported MS Office applications is listed in Jabber for Windows administration guide.
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Windows/9_0_1/b_jabber_win_icg_chapter_01000.html#reference_AC2F9334FEC54DA98861EB52944C6F08
Thanks,
Maqsood

Jabber for windows 9.7 photo issue

Hello,
I'm facing an issue with corporate photos on Jabber version 9.7. Before, with version 9.2 i had the same problem but after add an entry on the file jabber-config.xml the corporate photos were already shown.
What can be the cause for this behaviour with version 9.7?

Hi Amit,
Hope you're doing well. Guess the problem is solved. We installed this new version 9.7 of jabber on a machine with Windows XP OS. After reviewing the Cisco Jabber for Windows 9.7 Release Notes I noticed that the only available Operating Systems for jabber 9.7 are:
Operating System Support Cisco Jabber for Windows 9.7 supports the following operating systems:
•Windows 7 (32 bit and 64 bit)
•Windows 8 (32 bit and 64 bit). Note: Metro Interface and Windows 8 RT are not supported.
•Windows 8.1 (32 bit and 64 bit). Note: MediaNet (including deskphone video feature) does not currently support Windows 8.1
Thanks a lot!

MSI GT 628 driver for Windows 7 64 bit

Hi!
I am not able to find Windows 7 64 bit drivers for MSI GT628. Does anybody know where can I download it? I have pretty big problem with it. (It´s stucked very often and I have seen blue death for two times).
Thanks for all answers!

Hi, Click the below link to download the drivers for Windows 7 http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g6-Notebook-PC-series/5296082/model/5340269#Z7_3054ICK0KGTE30AQO5O3KA30R1

I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?

I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?

No easy fix for a few reasons:
1) Bootcamp requires a hybrid MBR for the partition table. That is: both an MBR and a GPT partition table at the same time with the GPT one having all partitions and the MBR one having only the ones that are relevant, but at most 4 of them (including the protective partition and the Macintosh HD one). Which leads us to:
2) The MBR part of the hybrid partition table cannot work with 3TB hard drives. MBR is limited to 2TB.
I am working on a small EFI app that can boot Windows in EFI mode on a Mac and that would mean that you can go GPT only on your system. The progress of the app is slow due to the nature of EFI and for now requires that you do an unattended Windows install with slipstreamed graphics drivers, but we are adding VGA loading on top of EFI quite soon after the rest of the app stabilises. The status of the app is documented at:
Win7 x64 booting natively via EFI (no bios emulation)
Windows does actually successfully boot in EFI mode on most Macs (anything with a 64bit EFI should work), but does not have graphics support even if you load the driver due to the VGA pci registers not being set by the firmware. Furthermore, in Setup and Safe Mode, Windows uses VGA instead of GOP which is a failure by design since VGA is a BIOS standard and not really compatible without hacks with EFI. Other EFI implementations also add VGA compatibility at a high cost to the firmware complexity for the VGA cards available on the market that don't actually contain anything in their ROM except the VGA BIOS.
My recomendations:
1) Install on a second smaller hard-drive; or
2) Wait for the EFI app to come out officially and use that to boot Windows Vista SP1 x64 and Windows 7 x64 (RTM and SP1) in the native EFI mode.
3) Wait for Windows 8 which supports VGA-less booting acording to the AMD presentation at UEFI Plugfest.

Adobe AIR 3.9 beta sdk&compiler with ios 7 for windows download broken

Hi,
I couldn't download:
Download AIR 3.9 SDK & Compiler for Windows — with iOS7 support (ZIP, 204 MB)
from http://labs.adobe.com/downloads/air.html
The download gets to about 56mb or so and then cuts out. All other downloads work fine, just this one stops. I think that maybe the file was not uploaded right.
Cheers,
Grant

Hi,
The links is active and working, looks like some network issue at your end, please try again.
-Thanks
Pahup

Translations in Skype for Windows

Skype for Windows desktop currently supports more than 38 translations for the user interface. You can easily switch between these built-in language via the menu item "Tools - Change Language". Should you have accidentially switched to a language you do not understand: It's the second menu from the right in the Skype window and the first item within that menu. In case your language is set to a language with right-to-left direction like Arabic or Hebrew it's the second menu from the left:
Using a custom language file
But there's more than just the built-in translations: Thanks to the outstanding contributions of Skype users all across the world there are additional translations available. Skype Community user is coordinating these efforts in an online project at Transifex and you can finr more information on that in the topic "Language files for non-official Skype languages available". Have a look there and check if your language is already available or you might be able to contribute by translating a few lines of text.

Well we are already currently looking up the account language based on the registration country. And that's obviously leading to some wrong matches. Previously the language lookup was based purely on the language of the Skype client you first signed up for Skype with. Different, but not much better. We are reworking this for a more consistent "one language per account" approach, but we need to ensure that all touchpoints - from clients to account pages to emails - are using and setting this language profile information consistently. And this is unfortunately taking some time.
I hope with that additional information you can understand the difficulty of such a "simple change".

Remote Agent for ACS for Windows 2008 R2 64-bit

Hi,
We having difficulties with installing remote agent on windows 2008 R2 64-bit server and got the attached error.
Our ACS is 4.2.0.124 and remote agents we tried are :Remote-Agent-ACSse-win-v4.2.1.15-K9.zip and Acs-4.2.1.15.9-RA.zip.
I see following urls says it does not support Windows 2008 R2 and also 64-bit Windows,
https://supportforums.cisco.com/message/3135061#3135061
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/remote_agent/rawi.html#wp289019
However following url says its support 2008 R2 with 64-bit version
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2.1/Release_Notes/acs421_rn.html
Appreciate if someone can adivse us what vesion (file name) of Remote Agent can support (or working) for Windows 2008 R2 64-bit.
thanks in advance

Hi Tarik,
What I wanted to say that the below url says that ACS 4.2 does not support on 64-bit OS:
ACS Requirements
You must use ACS Remote Agent for Windows, version 4.2, with ACS SE, version 4.2. We do not support other Cisco Secure ACS releases.
Note ACS Remote Agent 4.2 for Windows does not support 64-bit operating systems.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/remote_agent/rawi.html#wp289019
However could you please let me know what exact Remote Agent file you recommend to use for windwos 2008 R2 64-bit Server. The ACS SE version that I have is 4.2.0.124.
Thanks

Plans for Window 8 RT support ?

Similar Messages

Maybe you are looking for