Plant A supplying material to plant B, plant B supplying it for subcontract

All SAP Gurus,
Here are two plants: A and B
Plant A is EOU (Export Oriented unit)
Plant B: Domestic Plant
Plant A is providing material to Plant B,  57 F 4 challan is created.
Plant B simplying passing on this material to subcontractor, and creating one more subcontracting challen.
Subcontractor supplying material to plant B.
Plant B supplying the material back to plant A.
How this scenario can be mapped.
Please help.
Regards

Please do not create a challan from Plant A to B, Instead create a STO & if necessary an EI while transferring the material from A to B. A subcontracting challan can be created when the material is sent from B to the Vendor because reconciliation can take place here.
Then another EI can be created when the material is eventually sent from B to A again via stock transfer.

Similar Messages

  • Material transfer from one plant to another

    Hi expert
    i am transfer material from one plant to another , for the same i have  created a vendor in that i have assigned supplying plant, and in the Purchase order, i am need to use inventoried tax code.
    For the same i have done transfer with 351 and i did migo , but i didnt get  FI document for 101 movement
    If it is development, how do we acheive this.
    Let me know if you need more details on this. Appreciate your possible solutions to this.
    Thanks
    Rgds
    Nabil

    For the stock transfer within two plants in the same company code, Accounting document gets generated on doing goods issue.
    Supplying Plant Stock/Account BSX gets credited
    Receiving Plant Stock BSX gets debit.
    After that its stock in transit for the receiving plant and by doing goods receipt you are just taking goods in so the accoun ting document does not get generated again while doing GRN.
    If it is Company Code, it will be  sale & purchase concept  where in  vendor & customer master are created in respective plant and the accounting entries for that scenario will be
    At the supplying plant
    Stock Account Credited
    Cost of Goods sold Acc Debited
    At Receiving plant
    Stock Account Debited
    GR/IR Clearing Acc Credited
    You can also go through following link
    Re: STO -FI document is not generate from the GRN
    Regards
    Sangeeta

  • Material Issued from other Plants

    Hi All,
    I have 2 question here.
    I have created a STPO with delivery date say 12.09.2009 from my plant ABC to the Plant XYZ and 140 qty, For this XYZ plant has issued material on 15.09.2009 around 100 qty.,
    Now I am looking for the report ME2W to find out what are all the materials has supplied by other plant till 14.09.2009.
    but as per the report ME2W it is having I/P option as delivery date, so if i put delivery date between 01.09.2009 to 14.09.2009, it is showing  all the material which is issued on after 14.09.2009 also as i have put the delivery date and also it is checking as per delivery date.
    Question:
    1. How to get these reports ie., materials issued as per issued date or posting date not as per delivery date or not as per material code---- any transaction available for this.
    2. one more i come across here in STPO is that, if i create 100 qty of PO but it is allowing to issue more than the PO qty, say if i create Po with 100 Qty but other plant can issue more than 100 ie.,>100.
    Is thr any settings available to make such the system should not allow to issue more than the PO qty.
    Please help me out on this.
    Regards,
    Nagaraj S
    Edited by: Nagaraj  S on Oct 1, 2009 2:52 PM

    Dear Vidya Dewangan ,
    I have checked MB5B, it is not for the requirment what i want.
    See this report or MB51 would works with only 2 plants where within which these ST can occur.What in my scenario we have more than 2 plants, See i will clearly expalin the situatin -
    Thr are 3 plants-  Plant A,Plant B, Plant C.
    ST happens b/w A and B, A & C, B& C and Visa versa.
    Now I want to know what are all the ST happens between Plant A and Plant B, where Plant A has supplied some material  to plant B on some day(ie., 351 on posting day),say i dont know material i know only the dates.I cant use MB51, is thr any other report i can get.
    Pls help me out.
    Regards,
    Nagaraj S

  • Extend material master in other plants

    Hi there,
    I have 5 plants, one of them (e.g. Plant P001) is the main distributor for supplying all the materials for the rest. I´m using valuation at plant level.
    When I create a new material, I do it initially in the main plant and I have to extend it to the rest of the plants.
    My doubt is, there is a way to extend the material to other plants automatically including the sales views?
    I would like to minimize the possibilities of errors for manual entry, for example, enter the average cost of the material, which have to be the same for all plants.
    Thanks in advance,
    Mairo.

    Hi
    Please find below web links for information and procedure for Legacy system migration workbench
    link:[http://www.sap-img.com/sap-data-migration.htm]
    link:[http://www.sap-basis-abap.com/sapgeneral/step-by-step-legacy-system-migration-workbench-lsmw.htm]
    link:[http://www.sapdb.info/wp-content/uploads/2008/08/lsmw.pdf]
    Hope this help
    Regards
    Vikrant

  • Different Material Types in different Plants

    Hi,
    I have 2 Plant under a Company Code. A material being produced in plant A has to be sent to Plant B for further processing. I would like to maintain single material master for both the plants, but different Material Types. Material has to be treated as Finished Goods in Plant A and Raw Material at Plant B. Could any one please let me know how I can MAP it in SAP.
    Regards,
    Nagaraja Achar.

    Hi,
    For the Same material Code you can not maintain two material types in two plants..
    But you can make a Z* mat type with all the relevant views of FG & ROH..
    For Plant 1 it will have all the views
    and for Plant 2 extend only the ROH relevant views...
    Thx
    Raju

  • How to maintain material master data in plant....

    Hi all,
    while creating BOM I am getting an error "no material master data in plant'  can some one help me how to maintain the material master data in plant
    Regards,
    Balu

    Hi,
    Please check the below link for MMR creaion .
    http://web.mit.edu/sapr3/windocs/bpmdb01m.htm
    Regards,

  • How to maintain the material master data in plant

    Hi all,
    while creating BOM I am getting an error "no material master data in plant' can some one help me how to maintain the material master data in plant
    Regards,
    Balu

    Check the material available in MARC table in SE11 transaction against your plant.If it is not available please maintain through MM01 transaction.

  • Purchase Order: Material not listed in plant

    Hi all,
    While i am creating PO in 4.7 version it throws the following error :
    Material 100-100 is not listed in plant 1000(error 1) for the specified delivery
    date (or procurement period). One of the following errors occurred
    during the listing check:
    error 01: The material is generally not listed for the plant.
    I have cheked the period and it has been set for the current month, any suggestions are welcomed from the experts. My problem only does in a specific plant, the same material with other plant runs OK. If I do a returns order the problem doesn't appear.
    Thank you!!

    Hi,
    Check if material is created for the following views, purchasing and Plant/storage data, accounting 1.
    If not then you have to extend the views for this material through MM50 or MM01.
    And after doing so try to run the process
    Thanks & Regards,
    Kiran

  • Purchasing Report: Plant, Purchasing group, material type, PO, GR No.

    All SAP Gurus,
    Is there any Purchasing report available which gives the information regarding:
    Plant, Purchasing group, material type, PO, GR No., vendor, amount (all in single report only).
    Regards,

    Hi,
    Refer following reports;
    ME2N - List of PO Documents (In selection Screen use Scope of List - ALLES)
    ME80FN - General Analysis (Here in Output, select option "PO History" by clicking on the button at extreme right)

  • Valuation Class according to Material Master but not Plant wise

    Hi,
    Is there way to find out the Valuation Class according to Material Master but not Plant wise...
    Plant wise, we can get into MBEW table, but I want to find valuation class directly...
    Plz guide..

    I need to change Valuation class against material number...
    We have 18 plant in our company and more than 2,50,000 material's.
    Which one easy task for change in material master, either 2,50,000 material's or 2,50,000 X 18 (45,00,000) material list.
    If I go with plant wise, we need to change 18 times...also this is time consuming process... As I know in all Plant's, valuation class must be same...
    please guide...

  • Material not maintained in plant P100

    while adding material using MB1C T-Code i m getting bellow error
    Material "bicycel" not maintained in plant P100 and if i press again getting another message
    parameter for plant P100 not maintained in inventory management

    Hi
    Check whether the plant parameters have been maintained for your plant under Inventory management and Physical inventory
    If not pl maintain the same in SPRO
    Then U will not get the error
    Hope you are clear on this.
    Regards
    Vijay

  • More than one Plant in Customer Material record

    In Customer Material Info record I want a option of more than one plant. Right now I can enter only one plant in customer material info record. What can I do to have a option of more than one plant in customer material info record.
    Regards,
    Kumar

    hello, friend.
    as i understand, you would want options for more than one plant (to choose from) and not to restrict the number of choices.
    for practical reasons, you can only enter 1 (standard) plant in the customer-material info record.  nevertheless, you can enter a different plant in the customer master, and another plant in the material master.
    when you process the sales order, you can change the plant to any other choices, even those not included in the customer-material or customer master data, as long as these plant choices and your customer are assigned the same distribution channel.  of course, your material should also be extended to these plants.
    i hope this helped, even if a little.
    regards.
    jty

  • What plants is the Material Master used in?

    Hi guys,
    Can you advise of the transaction that would be used to find out what plants a specific material master is used in. I would liek to make some changes that are plant specific but cannot if another plant is using the material master.
    Paul

    I would liek to make some changes that are plant specific but cannot if another plant is using the material master.
    for
    When you want to make some plant specific changes why you bother whether other plants are using that material or not. because what ever you change it's appplicable only for that specific plant and it doesnt impact the other plants?

  • Automatically change material cost in all plants

    Hello,
    Our group is made up of multiple production companies and 1 distribution company. The distribution company is made up of multiple plants.
    All stock in the distribution company is replenished from the productions companies through plant A only, The stock is then transferred via MIGO to the other distribution plants. Sometimes when we try to transfer stock from plant A to B we receive the error "Account xxxxx requires an assignment to CO object". To correct this error we have to change the material cost in plant B to the same cost as plant A using transaction MR21.
    Is there any way to automatically assign the material cost in Plant A to the material cost in plant B?
    Nicholas

    Hi,
    Please check with T Code OKB9 to see that the Cost Element (G/L Account XXXX) needs to be assigned to a Cost Center to Post the Material Movement.
    As this is managed by FI/CO team,  please take the help of your FI/CO Consultant for the solution as you might be required to create a Cost Element or a G/L account.
    Hope it helps,
    Best regards
    Amit Bakshi

  • Material creation without specifying plant

    can i create a material without specifying a plant or storage location?is it possible.?what are differnt types of stocks in gr.

    Dear Kunal,
    You would need to give plant for plant relevant views. However, you would not need to give plant for views like Basic Data which is valid for entire organization.
    Different Stocks:
    1. Unrestricted Use of Stock
    2. Quality Inspection Stock
    3. Blocked Stock
    Special stocks and special procurement types are divided into the following areas:
    · Consignment
    · Subcontracting
    · Stock transfer using stock transport order
    · Third-party processing
    · Returnable transport packaging
    · Pipeline handling
    · Sales order stock
    · Project stock
    Regards,
    Naveen.

Maybe you are looking for