Plant address not changed in PO delivery address

Hello, I have changed a plant address in DEV & moved to QAS.i can find all the changed data in QAS in OX10.but when i create a new po for the same plant, print preview & delivery address tab is picking old address. how to handle this? please guide me.
Regards
Bheema

have changed a plant address in DEV & moved to QAS.i can find all the changed data in QAS in OX10.
Where exactly did you change the address and check for the address?
Often misunderstood, the address has to be maintained by clicking the envelope button in OX10

Similar Messages

Ip address not changing

Hi All
I am new to iMac's for about a year now. I had a question about ip addresses not changing. I have various devices in the house and when I change wireless networks they automatically update their ip address. Not so so for the iMac running Yosemite. It seems to have stopped working some months ago and I have been getting around this by changing the ip address manually in Network Preferences. This is becoming pain as you can imagine especially when other non familiar people use the computer.
The reason for the two wireless networks in the house is because I have one network which is without VPN and the other VPN connected for streaming services. I can't run all my regional services from the VPN connected network.
Thanks in advance for any help someone can give.
Regards
Vivian

Start up in Recovery mode. In the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. While in Recovery, you'll have no access to your saved bookmarks or passwords, so make a note of those before you begin, if they're needed for the test.
Test. After testing, restart as usual and post the results.

HT1918 hello i have moved countries from uk to australia i can not change credit card and address information nas it says 1 incomplete pass? i dont know how to delete that so i can move forward on this subject please can you assist me? thanx jason buckha

hello i have moved countries from uk to australia i can not change credit card and address information nas it says 1 incomplete pass? i dont know how to delete that so i can move forward on this subject please can you assist me? thanx jason buckham [email protected]

You'll need to contact support to have your account checked
https://expresslane.apple.com/GetproductgroupList.action

HT1051 Trying to change Shipping and Delivery address for one in the US, from Canada, and can't do it. State and zip code appears in red but no change in country name. Using French (Canada) iPhoto app.

Trying to change Shipping and Delivery address for one in the US, from Canada, and can't do it. State and zip code appears in red but no change in country name. Using French (Canada) iPhoto app.

Larry's right, You can still use your credit card, you just need to change the "billing address" to the recievers address. It gets billed to your CC and delivered to the US

Changing line item delivery address in shopping cart need to reflect same in all line items

Hi All,
Need help on below,
I have a requirement that when we change the shopping cart line item delivery address same needs to reflect all line items.
Suppose a shopping cart having 3 line items 1, 2 and 3. if i change the delivery address of line item 1, the same needs to reflect the line item 2 and 3 as well.
In my case if we change the 1's delivery address, after processing its genrating the IDOC on line item wise not in the header wise. And same having the different delivery address.
Thanks in advance.
regards:
Ramesh

Hello Ramesh,
we can do this changes in BBP_DOC_CHANGE_BADI . Create a Implementation for the above BADI and Inside that Implementation BADI method just call the function module BBP_PD_SC_GETDETAIL for SC item details by passing the Header GUID.
Once you get the Partner table(E_PARTNER) details.. Keeping a loop on SC item(E_ITEM) and change address number(ADDR_NO) in Partner table when Partner function eq X( X is an partner function values which you define in SPRO.).
pseudo logic:
CALL FUNCTION 'BBP_PD_SC_GETDETAIL'
    EXPORTING
      i_guid    = l_guid
    TABLES
      e_item    = lt_item
      e_partner = lt_partner.
* Check for all the line items if vendor is assigned
LOOP AT lt_item INTO lwa_item.
    READ TABLE lt_partner INTO lwa_partner
                      WITH KEY partner_fct = '00000019'
                               del_ind     = space
                               p_guid      = lwa_item-guid.
    IF sy-subrc eq 0 .
   * modification of address number logic here in partner table
    ENDIF.
ENDLOOP.
All the best.
Regards,
Sankarbabu

Plant address version in PO's delivery address

Hi All,
I have defined 2 international versions for our plant address.
Is it possible to propose the plant address verion as the PO's item delivery address depending on vendor's communication language automatically? That is, if vendor's language is 'English', PO's delivery address will be 'I' version address. Otherwise, another version address will be display.
Thanks

HI,
Yes offcourse you can do that in the programming logic of the form.
Say if the vendor is English then the address will be in english
if the vendor is in china then the address will be in chinease.
YES you can do that. tell the abaper about the requirement and he will help you out in designing the form according to your requirements.
Thanks & Regards,
Kiran

BP Address not replicated with the Premise address in IC-Web during move-in

Hello,
When we do the move-in of a BP, the premise address is not maintained as an additional address for BP in CRM and IC Web environments. We see the address being maintained in ECC for the BP, but don't see the same address replicated in CRM and IC Web. Please let me know if we are missing anything.
Thanks
Santosh.

Hi,
Does anyone have any inputs for the above question.
One more thing we observed is that, whenever we process a move-in (move-in date 7 days from processing date), the primary address in the BP still remains the old address (this is expected), and we see the new address in the Address overview with the new address validity from Move-in date. After 7 days, when the service address becomes the primary address for the BP (This happens after the move-in date), the address in the address tab is replaced with the service address and now this changed address is replicated into CRM. At this time we also see 2 addresses in the overview tab in both CRM and ECC.
To test this scenario, we processed a move-in with a prior date (Move-in date equal to current date or prior date), we found that the BP address is replaced with the service (premise address) and we see 2 addresses in address overview tab. Now we see the same being replicated in CRM.
Now my question is, how can we make sure that even if the new address has validity for a post date, CRM will show 2 addresses in address overview tab.
Edited by: Santosh Kolleti on Feb 17, 2011 12:32 AM

How to copy addresses (not email) between cards in Address Book?

I can not copy and paste postal addresses between cards in Address Book. I select the address in one card, Copy, and when I select another card the Paste option is grayed out. Copying postal addresses line by line between cards is quite tedious. Is there a better method?

While I can't offer a solution I can offer some commiseration. I have been trying to do the same thing and am stumped by both Address Books numerous deficiencies and the forums silence.

"FROM" shows email address, not name, for a few address book entries

What is strange is that for the people it happens to, Mail IS able to successfully cross-reference them to an address book entry by showing their real name (and photo if I have one), in the BODY of the message. In other words, Mail will always resolved email address into names in the body of mail messages (100% of the time if I have a matching address book entry), but will only show names rather than addresses in the list view maybe 85% of the time. Weird. Seems like mail should either know the sender and display a name instead of address, or not. My issue is that is knows them in the body but doesn't in the messages list (above the preview pane).
I can't figure out what about the address book card for these few people is any different from the others one which do the name matching perfectly every time.
A small concern here, I know, but it is very annoying that I can't figure this out. I first noticed it back with Mail for Tiger. Any ideas?

Brent W. wrote:
It is easy to prove. Create an address book card for a sender already in your Inbox, give this new address card a fake name, and the Mail app will substitute the fake name in the "From:" field of the email message.
you are right. It is easy to prove and Mail doesn't do anything of the sort when i try it. On the other hand if I change the From field when composing a message, any recipient (using mail or any other email client) will see that name. that name is sent with the message and you can see it if you view the raw source of the message. Mail certainly never changes raw source.

Displaying a Reply To Address not Other Than the Sending Address

I have my gmail set up to display, to my recipients, an address different than my gmail address. The gmail address does not appear in my emails. Although Mail allows one to specify a "Reply To:" address, the sending address is still displayed. Is there any way in Mail to achieve the described gmail behavior?

Hiya - I think I just figured out how to do this - see my post here: http://discussions.apple.com/message.jspa?messageID=10591255#10591255

Plant address(Delivery address) in PO not complete

Hi all!
I have maintained the plant address in SPRO-Entr stru-Logistic general. Like wise compny code addrress is also maintained . Both address are same. I have elongated the address tab and included values in STREET2, STREET3.
Problem is that while i create PO this address is not reflected completely in delivery address tab. Its showing only STREET/HOUSE NUMBER tab.. I want to display the STREET2 & STREET3 tab also in the PO. Then only i will get my complete address.
How to solve this. Thanks in advance.
Regards,
Raj.

I ahve a quotation form which I am pulling the footer with the plant adress and phone number and fax number . Right now my form is coded to pull the address and numbers from T001w and Kna1 table for tel and fax numbers . Now they want the telephone numbers to be pulled from the SPRO Plant indo, i.e in SPRO Enterprise strucrturew--definition logistic generaldefine copy delete plant ---address(tel number and fax number).
I would like to get the numbers from here , how do I get the plant information from there instead of getting it from the plant and customer tables.
Thanks
Aarav

In SAP 4.6 - Purchase order delivery address - Change

Hi All
I have created a PO and in print preview i can see the delivery address as plant address, which is also in PO item details. Now the EKPO-Address number does not have any value.
Once I have changed the delivery address in item details, the delivery address is blank in PO - print preview and also i can see a value in EKPO - Address number.
This value is exists in ADRC, which has the changed address. But the changed address is not in PO print preview, the preview is without deliver address only.
Please give some views about this. SAP version is 4.6
Thanks in advance
ARAS

Delivery address follows the rule
1. If Plant Address is maintained in Customisation, system will pick Plant address as delivery address
2. If Plant and Storage location address is maintained in customization and both plant and Sloc is maintinaed in P.O line item then Storage location address will pick.
3. If you cahnge the derived Default address to your own address, system will take precedence over the above 2 and create a address record, where you can see at ADRC, ADR6 I believe.
At present when you are making blank manually in the delivery address system is behaving properly by not picking the address.
Hope the above clarification will help you understanding , and you also simulate to get the result.

Delivery Address changes in third Party Scenario

Hi All,
System is not allowing to make changes in delivery address (At PR/ PO Level) for Third party Scenario (Sales Order based).
I had checked the Field Groups of PO/ PR Knowm to me and try to make delivery address field editable. but didnt get any success. Is it Possible to get the dellivery address field in change mode for third party Scenario. If yes, how?
pls. Note: I'm not talking about the Manual third party order processing.
Regards,
S Anand

Why dont you want to make a change at SO level?
From OSS note 550192 - FAQ: Changing third-party and individual PO items
Question: What do I have to consider when I change the ship-to party for the entire sales order or for a third-party item?
Answer: In the third-party scenario, the ship-to party of the third-party item in the sales order is identical with the delivery address of the respective purchase order item. Up to and including Release 4.5, there is no automatic function for a synchronous change so that this must be done manually in both documents. As of Release 4.6, the system automatically updates the delivery addresses from the purchase order items if the ship-to party of the third-party item changes. The change of the delivery address in the purchase order is therefore no longer possible; thus the 'Delivery address' is only displayed in the display mode in the purchasing transaction.
For additional information, refer to Note 204190.

Delivery address change in third party PO

Hi all,
There is a requirement that the user should be able to change the delivery address in a third party PO. The process is like SO is created with TAS item category which will create a PR with "S" item category and subsequently the PO with respect to PR. Now for reasons the customer may ask to change the delivery address given at the time of order. Now in standard SAP, a third party PO delivery address cannot be changed in PO (as the field would be disabled) rather in SO. But the user wants to change in PO itself and not in Sales order. One possibility for this is that the delivery address need not be a ship-to-party address rather could be a one time address without any masters. So the user need to manually type in the address.
Could anyone suggest a way by which the user is allowed to key in the address manually in such PO.
thanks & regards
asbin.

Hi Rajesh
thanks for ur response. But when a PO is generated from a PR which is automatically created when a third party SO(TAS item category) is created, it will not allow to change the delivery address in PO. Even in change mode the delivery address fields remain gray. I know this is against standard SAP ,but would like to know whether there is any workarounds to change the delivery address in PO itself.
thanks
Binesh.

Delivery address appearing at Item level and not at Header level in PO

Hello Experts,
We are facing an issue as described below:-
We are in SRM 7.0 using classic scenario.
After approval of multi line Shopping Cart in SRM ,PR's are getting
automatically created in backend R/3 system.After converting PR's into
POs in backend R/3,we are observing that the delivery address for these
PO'are getting printed at Item level and not at the Header Level
inspite of the delivery address being same for all the Item level.
As desired,the delivery address in the PO's should have the delivery
address at the header level if the the delivery address is identical
for all the Item Levels.
However,if we create a PR directly in R/3 system and then convert these
PR's into PO's in the backend R/3 system,we find that the deliver
address are getting printed at the Header Level if the delivery address
is same for all the item level(which is as desired)
Any pointers will be highly appreciated.
Thanks & Regards,
RKS

HI Paul,
Thank you for your response.In our case even if all the Line/items level have same Plant and storage location still the delivery address is getting printed at Item level and not at Header Level and this is happening only for PO's created from PR's orginating from SRM7.0.
However if we create PR's directly in R/3 and then convert them into PO's,the delivery address is getting printed at the Header level if the delivery address is same for all the Item level.
Can you plz some insite into this?
Your help will be highly appreciated.
Regards,
RKS

Plant address not changed in PO delivery address

Similar Messages

Maybe you are looking for