Plant address picking wrong
Hi Gurus,
While creating Stock transport order ,the delivery address of the plant is picking wrong. I chcked in the T001w table , the plant address iscorrect but it is not picking in the STO.
Please suggest what could be the reason.
Regards,
Subbu
hi,
which address system taking (wrong means what ?)
have u creatd plant as vendor ?(requirement)
have u change the delivery address in PO?(please check)
anyways system takes the address By ADRNR(address no) in ADRC(Table).
regards,
sujit
Similar Messages
-
Dear All,
While Making Third Party PO with Reference to Sales order.
The Address is not picking of Customer but of Plant Address.
The Delivery Address is of Customer.
Regards
AmeyHi, we met same error - did you go BADI eventually? Thank you.
-
Plant address wrong while doing SCC1
Dear Experts,
Plant created by copying from an existing plant.
I changed address manually An address number assigned. Later I did SCC1 to another client.
Now the Plant address in the second client is wrong. It has copied the same number from source client.
Since the address number was alreday present in the destination client, Plant addresses is wrong.
How to avoid this?
We need a new address number created instead of same address number transfering to destination client.
Plaease advice
regards,
shashidharIt should be working properly as default in my opinion.
There are some notes related to this problem (like 197206, 368630), maybe you can use these or find one searching on sap service site.
(I assume you executed SCC1 properly (i.e. "Including Request Subtasks" with flag))
Edited by: Csaba Szommer on May 12, 2011 2:06 PM -
Plant address not changed in PO delivery address
Hello, I have changed a plant address in DEV & moved to QAS.i can find all the changed data in QAS in OX10.but when i create a new po for the same plant, print preview & delivery address tab is picking old address. how to handle this? please guide me.
Regards
Bheemahave changed a plant address in DEV & moved to QAS.i can find all the changed data in QAS in OX10.
Where exactly did you change the address and check for the address?
Often misunderstood, the address has to be maintained by clicking the envelope button in OX10 -
MIGO Its picking wrong Profit Center
Dear All,
Account Assignment(N) purchase order i have created. While doing MIGO its picking wrong profit center. I have checked material master and Network everywhere we have maintained the exact profit center.
But MIGO its picking another plant profit center. Could pls help me to resolve this issue.HI,
Please check youe settings in SPRO --> Financial Accounting (New ) --> General Ledger Accounting (new) --> Business Transaction --> Document splitting --> Define Document Splitting Characteristics for General Ledger Accounting
Here you must have defined Partner profit center.
pherasath -
How to get Plant address from SAP R/3 to SRM
Hi Gurus,
We need to retrieve the plant address from SAP R/3 to SRM and display it in the output list of the report (SRM).
Suggest any standard FM or should we need to create a Custom Remote enabled FM and put the select query to get the address.
Regards
PaulHi Paul,
Try using the RFC_READ_TABLE function module...
Pass the table name as t001w which contains the plant details.
Hope this helps.
Thanks,
Pradeep -
How can I change my email account address on my Drop Box account? The present address is wrong.
Dropbox is not in any way associated with Adobe. Ask Dropbox support, or start using Workspaces at https://www.acrobat.com/
-
Plant address version in PO's delivery address
Hi All,
I have defined 2 international versions for our plant address.
Is it possible to propose the plant address verion as the PO's item delivery address depending on vendor's communication language automatically? That is, if vendor's language is 'English', PO's delivery address will be 'I' version address. Otherwise, another version address will be display.
ThanksHI,
Yes offcourse you can do that in the programming logic of the form.
Say if the vendor is English then the address will be in english
if the vendor is in china then the address will be in chinease.
YES you can do that. tell the abaper about the requirement and he will help you out in designing the form according to your requirements.
Thanks & Regards,
Kiran -
Business Area & Plant not picked in CIN entries while doing MIRO
At the time of performing MIRO, the automated entries related to cenvat clearing account for excise in CIN are made by system.
At the time of excise capturing the Business Area and Plant are picked up at line item for Cenvat Clearing Account.
But at the time of MIRO the Business Area and Plant are not picked at line item for Cenvat Clearing Account.
The client requires the segregation of the entries on the basis of Plant / Business Area.
Regards
DharmveerGB01 is the table where you define it.
and for documentation u can start from:
http://help.sap.com/saphelp_47x200/helpdata/en/27/06e23954d9035de10000000a114084/frameset.htm
use various links in this page, u can know everything abt substitution.
Regards,
anantha -
How to include plant address data in price calculation procedure in PO?
Hi, experts
I need to include in conditions PO the field REGION from plant address data. Price depends on region of recivable plant. I included the field in condition table (it was in the field catalog KOMK and KOMP), it was included as KOMK- REGION. As a result price in PO depends on the field REGION from vendor address data in header PO. How to change to REGION from plant address data in item of PO?
ThanksHi,
Since SAP standard routines don't fill KOMK-WKREG
the badi implementation me_po_pricing_cust
would be the best option. User exits would work
too at the end of function me_fill_komk_po, since it's called right after the check for the badi in function
me_fill_komk_po.
Regards,
Edit -
Bank Reconciliation - Picking wrong accounts
Dear All,
I have configured manual bank reconciliation for our house banks as follows,
GL Codes Description Symbols Acc Mod Curr GL Acc Acc Symbol Desc
102310 Bank ACC 01 - Main LK00 ++++++++++++ Main
102311 Bank ACC 01 - Incoming Payments LK01 +++++++++++1 Receipts
102312 Bank ACC 01 - Cheque Payable LK02 +++++++++++2 Payments - Cheques
102313 Bank ACC 01 - Bank Draft (Foreign) LK03 +++++++++++3 Bank Draft
102314 Bank ACC 01 - Bank Transfers (Dm) LK04 +++++++++++4 Bank Transfers
102315 Bank ACC 02 - Main LK05 +++++++++++5 Main
102316 Bank ACC 02 - Incoming Payments LK06 +++++++++++6 Receipts
102317 Bank ACC 02 - Cheque Payable LK07 +++++++++++7 Payments - Cheques
102318 Bank ACC 02 - Bank Draft (Foreign) LK08 +++++++++++8 Bank Draft
102319 Bank ACC 02 - Bank Transfers (Dm) LK09 +++++++++++9 Bank Transfers
When process using Tcode ff67, LK00-LK04 range is working fine but LK05-LK09 range is picking wrong accounts (ie. It picks from LK00-LK04) range.
Any idea to come across above error ? Appreciate your help on this.
Thanks
MadhawaThanks for your reply.
I have 8 house banks and GL codes created as follows,
102310 Bank ACC 01 - Main
102311 Bank ACC 01 - Incoming Payments
102312 Bank ACC 01 - Cheque Payable
102313 Bank ACC 01 - Bank Draft (Foreign)
102314 Bank ACC 01 - Bank Transfers (Domestic)
102315 Bank ACC 02 - Main
102316 Bank ACC 02 - Incoming Payments
102317 Bank ACC 02 - Cheque Payable
102318 Bank ACC 02 - Bank Draft (Foreign)
102319 Bank ACC 02 - Bank Transfers (Domestic)
Iif I create GL accounts keeping with 10 (Main + 9 clearing accounts) will be ok. But I need keeping with 5 accounts (Main + 4 clearing accounts for each house bank).
As suggested, if I keep GL accounts codes instead of mask, is it recomended to keep ?
Thanks -
Hi Expert,
Can you guide us, There some 5 purchase order ,out of that 3 purchase order picking wroght GL account but 2 purchase order picking Wrong GL account.
Where as we have same material for every purchase order including the Valuation class
So please guide us, why Purchase order picking wrong purchase order. and how can we correct the GL account in purchase order.
Regards
Santosh KumarHi Expert,
Can you guide us, There some 5 purchase order ,out of that 3 purchase order picking wroght GL account but 2 purchase order picking Wrong GL account.
Where as we have same material for every purchase order including the Valuation class
So please guide us, why Purchase order picking wrong purchase order. and how can we correct the GL account in purchase order.
Regards
Santosh Kumar
Santosh,
Make your question 1st. You have been telling PURCHASE ORDERS and nothing else. Pls know what you want.
Suraj -
Tcode for plant address in different languages
Hello All,
Need a small n quick help from you all...
Can anyone of u give me transaction that provides plant address in <b>different languages..</b>
I could see config for plants maintenance but could not find its address in different languages...
Thanks,
VikramDear Vikram
To maintain the address of the plant in different language you can follow :
After maintaining the address in english laungauge if you want to maintain the address in french /german then you can slect the tab <b>International version</b>
then select version i.e the langauge and then maintain the address in that langauge.
Or you have to login into that language and maintain there the address ..
Regards
Sunny -
Data Table where all plant addresses are stored in
I would like to download all plants addresses in my client to a spreadsheet.
I not sure which table holds this info - any help with table name?
ThanksThanks Volkan.
Table V_T001W gives me the plant name & description. I now need the physicall table where the associated adress filds are stores. The fields you provided appear to be held in a stucture - ADDR1_DATA and not a table.
Any idea whow I can extract theses plant addresse from a structure? -
Get plant address for PM/PS PO from the first active line item
Hi Gurus,
I have a need to modify the current PO printout where i will need to extract the PO's first active line item's plant address. This plant address are actually stored in standard text which will be maintained in a custom table. Should I be including this logic in the print program or should i just directly call it from the form itself?Can i do that directly, I will need to check for the account assignment type before even calling from the customised table for address(which is stores standard text details). Can u do that in sapscript?
Maybe you are looking for
-
Scheduling Agreement LU: Can Route be changed in the SA item?
Hi all, I noticed that in the Transport Scheduling Agreement SA type "LU" but in general I think in any SA there is no any chance to change the route determined by the system in the shipping data within the item of SA. If you select Menu Item > More
-
"404 Error - The requested resource does not exist" found in portal for Collaboration room
Hi Experts, I am trying to resolve this issue since a week but not able to solve it, so i need your help. The Problem is when i assign a collaboration room to a user, the room is assigned but when the user clicks on the room link it gives the "404 Er
-
VS 2010 and sql server support
Hi, I'm currently using VS 2010 10.0.40219.1,Framework 4.5.50938 SP1 Is the above is supported with sql servers versions of 2012, 2014. What if i switch to VS2012, will it support sql server 2008, 2008 R2. Pleas share your inputs Thanks
-
How can I get an official apple T shirt?
How can I get an official apple T shirt? I don't have an apple store close enough to me to be able to get one but I would like to be able to get an Apple T shirt.
-
I created a new library and imported my old projects/libraries; then relocated them to external locations. All works fine except: I keep on having lots of raw files that are disconnected. The locations points to my "volume name + number 1". Manual re