Plant and shipping point have no connection but still order got created.

Hi All,
An order was created and subsequenty delivered and invoiced. Later on the goods were returned.
The problem which occured is that the return order have plant A  and shipping point B, which are in no way connected to each other. There is no configuration done to attach this two, still the order got created.
I wanted to know even if plant and shipping point is different, can a order be created and saved.
Please giude me.
Regards,
Satish.

yes Satish
this is possible, take a scenario, suppose one company is having 3 plants A,B,C with shipping point A1,B1,AND C1 respectively. But the requirement is such that they will collect the material from plant A and deliver it form B1 shiiping point which is linked with plant B.
so it is possible to create and save order if plant and shipping point is different.
bye

Similar Messages

  • How to get automatic plant and shipping point and storage location

    hi,
    sap gurus,
    how to get automatic plant and shipping point and storage location automatically into the sales order
    i have done all the config settings for that
    but its not appearing automatically.
    regards,
    balaji.t

    Hi
    Balaji...
    U can get the plant in sales order,  by doing the default the same in customer master or in  material master. In customer master -- sales are data--shipping tab delivering plant there u can assign and get the same in order for that customer. it is better to do in customer master rather than in material master.
    Shipping point is getting determine in sales order and u can not make it default like plant. Shipping point is determine in the basis of Shipping condition of customer ( ship to party)+ loading group of material + Deliverying plant there u have to assing the shipping point and it will flow in the sales order. Tcode OVL2
    For S loc u have to enter manually in the sales order u can not get it automatically.
    Hope this will help you.
    Thx.

  • Plant and Shipping point assignment

    Dear All,
    As a standard process we have copied the plants and shipping points in the development client and i have deleted the default shipping point and assigned the newly defined shipping point.I have forgotten to assign one plant and shipping point and i have even deleted the default shipping point.Now i have to assign the plant x to the shipping point x where i am not able to find the plant in the  ovxc screen.Is there any way to find the missing plant or i have to delete all the assignments and reassign again.
    Help required as early as possible.
    Thanks in advance,
    Ramesh.

    1)  Check in OX10 whether you could see that plant
    2)  Check in OVXD whether you could see that shipping point
    If the answer to both is yes, then you should be able to see in OVXC also.  If not, better try to delete in the above areas also, recreate and then check in OVXC
    thanks
    G. Lakshmipathi

  • Relation between plant and shipping point

    Hi all,
    my simple question is,  what is the relation between plant and shipping point ?
    in book i read, it is                      many to many,
    but in some web link it is showing 1 to many
    what is the logic behind these two ans.
    pls tell me the ans...
    Regards
    Avinash

    Hi Hegal . K . Charles,
    it is correct,  as we discussed above it may be MANY to MANY .
    Suppose, we hv 2 plant 1 in delhi and 2nd in nagpur. and this company want to export via inland water ways, in this case we can assign mumbai port to delhi and nagpur plant as well.
    as you said it is correct, It is just  not to overload the master data maintenance 
    Ex- In case of Sales Org. Its is always advisable to keep it minimum to per company code. Because master data records are multiplied by each additional org. element.

  • Plant and shipping point is determined at Header or item level?

    Hi,
    Shipping point is determined at Header level or item level of Sales order?
    How about Plant??
    Thanks!!

    Both Shipping point & Plant are determined for each Item in the Sales order automatically by the system.
    For determining Plant, system first search the CMIR,
    if not found the Plant there or CMIR is maintained then system searches Customer master of the SH, i
    f here also not found then system sarches the Material master.
    This is called Priority rule which is hard coded in SAP and can be changed by customisation.
    For determining Shipping point, system takes three fields into consideration, they are
    1. Shipping condition (first check Sales doc type , if not found then takes from Customer master of SP)
    2. Loading group ( material master> sales org group 2)
    3. Delivering Plant
    So, they are (Shipping point & Plant ) item specific data in sales order.

  • I have adobe 3:2 starter and all photos have been deleted but still have thumbnails, can i restore photos

    please can some one help me to restore my photos from my thumbnails due to my son deleting my photo file where i used to keep them

    Boy, I wish Adobe had a special OOPS! folder for all of us who accidentally deleted photos.  I lost 5 photos.  I deleted them from Adobe after I moved them to their own special folder in My Documents, but they're not there.  I've been trying to recover them for the past few days using data recovery programs like iUndelete and iRescue, but no luck. 
    Is Photo Well the same thing as thumbnails?  I've read where some people who have lost their photos still are able to view them as thumbnails, but if it's the same thing as Photo Well, mine don't show up there, either.  I can't remember if I chose "delete from hard disk" but I must have, because I've searched my computer and can't find them. 
    QUESTION:  By any chance are deleted photos assigned a different name than the original photos?  Maybe I've been searching for the wrong files all along????  Ugh, I'm about to give up, but does anyone know anywhere else I can look?  I've already emptied my Recycle Bin.  Thanks for any help anyone can give.
    AdobePeg

  • No matter what website i go to mozilla goes straight to problem loading page. i clearly have internet connection but it won't go to any websites. what's wrong with it and what should i do?

    i had this problem before. i went to the IT department in my school and they fixed but i dont know how. now it's happening again and i don't know what to do. i've been using internet explorer so i do have internet connection, but i mozilla is way faster and more reliable so i really need this problem to get fixed please and thank you.

    Do a malware check with some malware scanning programs on the Windows computer.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    *http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    *http://www.superantispyware.com/ - SuperAntispyware
    *http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
    *http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    *http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    You can also do a check for a rootkit infection with TDSSKiller.
    *http://support.kaspersky.com/viruses/solutions?qid=208280684
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • I do have wifi connection but no internet, how is this possible? I logged in to the internet at my friends place and when I got home my own internet was not working anymore

    I do have wifi connection but no internet, how is this possible? I logged in to the internet at my friends place and when I got home my own internet was not working anymore

    This is possible to be connected to WiFi but not internet.
    You connect to your modem/router via WiFi and whether it is connected to the internet or configured properly to route the internet to WiFi devices is a different story.
    Now if you've already reset your WiFi (try disabling and enabling) and perhaps even restarting your MBP
    Then make sure that your modem/router is connected to the internet.
    You can try any other device, lights on the modem/router or use Eth cable to test.
    Report back your findings.

  • I downloaded the latest iOS7 to my iPad and then the screen went blank and would not respond.   I have tried pressing the two buttons together and briefly get the Apple logo but still can not start up, the logo disappears.   I have tried connecting the iP

    I downloaded the latest iOS7 to my iPad and then the screen went blank and would not respond.   I have tried pressing the two buttons together and briefly get the Apple logo but still can not restart, the logo disappears.   I have tried connecting to my iMac to restore the iPad but the device does not show up (I have an old iMac).   What else can I do?

    You need to be running Snow Leopard 10.6.8 at the very least in order to sync your iPad with iTunes so you could update your Mac, if it can be updated, and if you care to do so.
    If that's not an option, you will have to find someone that can restore the device for you with their computer running iTunes or make an appointment at an Apple Store and ask them to restore the device for you.
    I hope that you have an iCloud backup, because you will lose everything on the device when it is restored.
    Snow Leopard can still be purchased in the U.S. Apple Online Store.
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Also, I would not give up on the reset technique....holding down on the sleep and home buttons at the same time until the Apple logo appears. It takes about 10-15 seconds and sometimes just a little longer to get the logo to appear.

  • HT4993 I'm trying to place a phone call and when I do the 3G icon goes away and the phone just says connecting but never does. I have almost full service and only have had my new iPhone 5 for two days. Can anyone help because I can't call Sprint at the mo

    I'm trying to place a phone call and when I do the 3G icon goes away and the phone just says connecting but never does. I have almost full service and only have had my new iPhone 5 for two days. Can anyone help because I can't call Sprint at the moment???

    Settings > General > Reset > Reset Network Settings

  • Trying to connect with my father on Facetime and all we get is connecting but never connect. Have updated the software, Trying to connect with my father on Facetime and all we get is connecting but never connect. Have updated the software

    Trying to connect with my father on Facetime and all we get is connecting but never connect. Have updated the software, Trying to connect with my father on Facetime and all we get is connecting but never connect. Have updated the software

    Hello trailblazer59,
    The article linked below provides some useful troubleshooting steps that can help get FaceTime working on your iPhone.
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/TS3367
    Cheers,
    Allen

  • I have an ipod and an iphone 3GS and a wireless LAN device, with my ipod I have a connection, but not with my iphone ... why is that?

    I have an ipod and an iphone 3GS and a wireless LAN device, with my ipod I have a connection, but not with my iphone ... why is that?

    - An iPod can only sync with one iTunes library. Yu can however manage music and videos among different computers by:
    Using iPhone, iPad, or iPod with multiple computers
    - To change syncing computer, move all the media to compute r#2
    - Connect the iPod to #2 and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
    - Restore the iPod from that backup
    Note tha the iPod backup the iTunes makes does not include synced media like apps and music.

  • Available plants & redetermine shipping point

    Hi experts, i have two problems. First, i will describe the situation and then the problem.
    in our system , we maintain delivery plant field into customer master. From this reason, when i create a sales order, SAP copy this plant as default value in sales order.
    Let's assume that we make a sales order for customer 10 which has plant P1 as default delivery plant.   And material M1 with following available stock:
    - in M1 plant 0 qty
    - in M2 plant 10 qty.
    First problem:
    In this case , when i create a sales order, SAP will propose automatically P1 as delivering plant, but in P1 there are no stock (0 qty). Is there any way to propose automatically another plant  when in proposed plant there are no available stock ?
    Second problem:
    In our system we have some generic materials which always will be delivered and shipped from one plant. So, let's assume that this plant is P1. If a customer has default plant P2, then in sales order will copy default plant from customer master. I solve this problem from a user exit (userexit_move_field_to_vbap) -- i make some modifications-- but the real problem is that, when i do this forced change, shipping point is not redetermined. 
    Is there any way to redetermine shipping point in this case (forced change of delivery plant) ?
    I give you an example:
    -customer 10, default plant P1
    -material MG01 (this material should always deliver from plant X1, shipping point X1)
    - two shippping points: P1 and X1
    When i create the sales order, SAP propose automatically P1 as default plant...but in background, in user exit userexit_move_field_to_vbap i have some modifications: if material is MG01 then plant would be X1. But , in this case, shipping point will be determined based on old plant (P1) not based on new forced change plant (X1) so shipping point will be P1 instead of X1. So, is there any way to redetermne shipping point ?
    Thanks in advance.

    Hi,
    Is there any way to propose automatically another plant when in proposed plant there are no available stock
    As fara s my understanding there is no automatic replacement of plant.you can do it manually
    For determining shipping point as you used userexit for plant as like this you can force to change shipping point.
    Kapil

  • Cant Assign Plant to Shipping Point

    Dear Gurus,
    I've defined my Plant then later defined my shipping points. When it came to OVXC I could not see my plant so therefore I could not assign my shipping points to it. What is the reason for this .. did I miss a step? Thanks in advance.
    Best Regards,
    Jin

    go to define plant and see whether ur plant is appearing there and whether u have maintained the address for the plant, if yes check whether u have maintained these things:
    1.define sales org.
    2.defien division
    3.define sales office.
    4.define shipping point.(check if u have maintained the address for the shipping point)
    5.assign sales org. to company code
    6.assign distribution channel to sales org.
    7.assign division to sales org.
    8.set up sales area
    9.assign sales office to sales area
    10.assign sales org, dist.channel to plant
    11assign shipping point to plant

  • WHENEVER i SURF THE WEB AND PLAY ITUNES MUSIC, THE ITUNES MUSIC STICKS AND SKIPS AND STOPS AND STARTS. i HAVE BRAODBAND COnNECTION AND AN ADEQUATE MODEM

    WHENEVER i SURF THE WEB AND PLAY ITUNES MUSIC, THE ITUNES MUSIC STICKS AND SKIPS AND STOPS AND STARTS. i HAVE BRAODBAND COnNECTION AND AN ADEQUATE MODEM

    I am experiencing the same problem, not being able to access internet at the same time as streaming iTunes music through an Airport Express.
    Our configuration consists ot; an iMac G5 and an AirPort Express connected to a cable modem.
    This problem first occurred using iTunes 7.0, now updated to iTunes 7.0.1, along with OS X 10.4.8
    I have followed the Apple troubleshooting guide - without success to this point. The internet can be accessed (although slower than usual). However when the AX is set, using the AirPort Admin Utility to provide an AX provided IP address to the computer, the internet disappears, but iTunes can play over the network via the AX station.
    I am suspecting a damaged preference file, or something of that nature, but am not sure what file(s) to be searching for.
    Any help here would be appreciated.
    thanx

Maybe you are looking for