Plant & Excise Group in Project System Environment

Dear All,
Our scenario involves Project System. Client has projects going on all over the country & overseas.
We are creating Plant for all the projects.
a) Here is it necessary to create Excise Groups similar to the number of plants?
b) Or does it depend on the number of Excise Registration Numbers?
c) Here if we have multiple plants & create one Excise Groups, will it create any problem in excise account determination?
Pl advice which factors to take into consideration in this regard?
Thanks & regards,
Gov

hi
as per the definition of excise registration
An entity in India that is entitled by law to produce any goods liable to excise.
Each entity is assigned its own excise registration number.
Every factory that manufactures excisable goods is required to register separately, so that a business with seven factories requires seven registrations
when comes to excise groups generally we take one excise group for one plant, but we can also have more number of excise groups when accounting demands so

Similar Messages

  • Problem regarding Plant-Excise Group configuration

    Dear Xperts,
    In this business scenario, a Plant is acting as a Manufactuing Plant and as well as a Depot concurrently.so we do have two Excise registrations , one for depot and another for Mfg. Plant.We have defined two Excise groups also , one with Depot indicator.
    Now when we are going to assign the same plant code to two different Excise Groups ,system is throwing error of dupicate entry in table J_1IWRKCUS as the Plant column in this table is the only Primary Key.We want to create/modify this Primary Key to Plant-Excise Group combination.How can we proceed?
    Pls note that we ca not create two different virtual Plant codes.
    Regards,
    Soumick

    Hi Expert,
    Create the Excise Registrations as per your requirements, if you have to create the depot as plant, if you have a separate Excise Registers.
    and assign the Plant and Depot(Second Plant) to one Excise Group and try to do the remaining configuration.
    For further reference do refer the below link.
    http://wiki.sdn.sap.com/wiki/display/ERPLO/CIN+Configuration
    Regards,
    GK
    SAP

  • Plants / Excise Group /  Series while preparing Purchase Orders, Sales Orde

    Dear all,
    sap gurus plz do need ful
    Presently we are making some mistakes by selecting wrong Plants / Excise Group /  Series while preparing Purchase Orders, Sales Orders, GRIR and Invoices.  We need to make it mandatory to select respective Plant / Excise Group / Series only, so that no-body can select other plant except the respective document.
    full points awarded,
    regards
    deepa

    Hi,
    For a particular user, you can set the user parameters in transaction in SU3 wherin you can set the default values.
    Regards

  • Default excise group and series group issue

    Hi Gurus
    I have a doubt. Is it possible to maintain the default excise group and series group in this order
    sales org     dis chnl    division    ship pt    plant    excise group    series group
    1000               EX         CD             1000     1000       10                       A1
    1000               EX         CD             1000     2000       20                       A2
    i tried this combination, but getting the error message that a key already exists....The header data sales area and shipping point already exists.... I cant understand why we cant give the same sales area and shipping point for a new plant combination
    Thanks in advance
    Mathan

    Hi Mathan,
    When we say Excise group then it is maintained for the plant as it is maintained with Excise authorities. We can have same shipping point for 2 different plants but the possibilities are less and when 2 plants share the resources and facilities then those plants are registered as a single excise entity with the authorities. That is the reason that the option of having the same sales area and shipping point as header data is not allowed for more than one excise group. This is more business related than SAP.
    Hope this clarifies the doubt.
    Regards,
    Antima

  • Trabsfer Pricing Treatment in Project System

    Hi,
    Can someone provide me with a brief overview of how transfer pricing work in Project System?
    Do we need to have profit center activated for this?
    In my business scenario, I will have projects which perform work to support other project.
    Under this circumstance, the service provider project would like to charge the service receiver project with certain profit margin.
    I would like to understand how this will work in project system environment and will the margin be charged from one project to the other project as and when the transfer of service happen or this will be charged only periodically?
    If then what will be the basic the calculate the transfer price and margin?
    Thanks for the help in advance.
    Regards,
    Cheah

    hi gurus
    any reply
    regards
    vijay
    Edited by: vijju489 on Jun 2, 2011 11:25 AM

  • Mandatory  Excise Group in Order (Urgent)

    Hi,
    I need to make it mandatory to select respective Plant / Excise Group / Series only, so that no-body can select other plant except the respective document.
    Rgds

    the scenario is as follows:
    there r different depots for which difeerent Excise groups & different series groups are maintained.
    now while doing J1IJ i m putting delivery no, excise group, but i can select any series group from the list, which i dont want......
    It must only be possible to select the series group defined for the particular plant.
    And plant(Depo) is having only one series group not two hence how cud ur sugesstion be mapped as it has only one series group assigned
    And when in J1IJ i enter any series group which is assigned to other plant it takes that too and i dont wanna that to happen.
    I understand what u r saying is to diffrentiate the series groups as "Domestic" and "ARE1". but in my case the plant is used as a depo and there's only one series group assigned to it.
    Thanks in advance for all ur help and time
    Rgds
    Edited by: SAP SD GUY on Apr 15, 2008 9:36 AM

  • Depot indicator in plant setting VS excise group settings

    hello all.
    can anybody tell me how systems makes the priority of depot indicator in plant settings over the excise group settings?
    pls reply me urgent.
    regards
    simran

    sd

  • EXCISE GROUP H1 NOT RELEVENT FOR PLANTS IN PURCHAGE ORDER

    Dear All,
    While creating vendor excise invoice by Tcode: J1IEX it is throwing error AS MENTIONED BELOW,
    EXCISE GROUP H1 NOT RELEVENT FOR PLANTS IN PURCHAGE ORDER
    Kindly help in this matter.
    Regards
    AJIT K SINGH

    Hi
    Check the series group which your giving in J1iex.. Has it been assign to to Excise registration of Plant. And you have given us the Message number and application area. If it is a customized message then you need debug with Abaper.
    Regards
    Antony

  • One Plant Two Excise Groups

    Hi,
    We have 2 Excise Groups for One Plant (Becaz they have two Excise Regn) .If the user forgor to Change proper excise group at the time of GR (MIGO)
    Then How to correct it he has to cancel the Migo and then hehas to post again with reqd excise group na?
    Am I correct?
    Please correct me.
    Thanks
    Prasad

    Hi,
    you can control with authorisation.
    by this activity your registers will get spoiled. becuse by reversal it doesnot take out the enteries from registers.
    Regards
    Rajesh

  • Import PO for different plants having  diff. excise group

    Dear All ,
    How to capture & post the Excise Duty for an Import PO ,
    Where the PO is created for different plants .The plants have
    different excise groups.
    Regards
    R B Panda

    The only way to do it is to assign a small notional value (like 0.01 USD) to the item, so that the conditions tab does not disappear.
    The only problem will be that the GR/IR clearing account will have an open entry, which can be cleared via MR11 with minimum accounting impact.
    Regards,
    Aroop

  • Subsiquent Delivery Excise Group Plant

    Hi all
    I've made GR captured Excise and Posted it in MIGO Mvt type 101
    Then I've made Return delivery (mvmt type:122) against the material document generated from 101 mvmt type.
    Again I made subsiquent delivery in MIGO (It selected mvmt type 101 again, I have also changed to 123) against material document generated from 122 mvmt type.
    In both the movement type it displays the eror as "Excise group (M1) does not belong to plant (MCP1)"
    Please guide me.
    Regards
    K.R.Srinivasan

    Hi,
    Check the Excise Registration Key for Excise group and Plant it should be same.
    In SPRO > Logistics - General > Tax on Goods Movements > India > Basic Settings > Maintain Plant Settings
    And in SPRO > Logistics - General > Tax on Goods Movements > India > Basic Settings > Maintain Excise Groups

  • Plants and excise group in multple comany codes

    Hello SAP Gurus
    I need one clarification
    I have a depo Plant
    I have gone for multipls company codes so that eventhough it is one depot , I have created multple plants and assinged to each plant to each company code (1:1).
    Now can I have single  excise group for all the plants???
    rgds
    SAP12

    You can use same excise group for all plants of different company codes, provided
    1.     your all company codes is having same chart of accounts
    See IMG >Logistic general > Tax on Goods Movements > India > Account Determination > Specify G/L Accounts per Excise Transaction  .
    2.     you need all settings same for all plants related to excise group for the customizing  IMG >Logistic general > Tax on Goods Movements > India > Basic Settings > Maintain Excise Groups
    Otherwise maintain different excise groups.
    I will suggest you maintain different excise groups so that you will be having flexibility in future also.

  • Can we give same Excise Group to two diff.  Plant within same company code

    Hi,
    Can anyone please tell that whether we can assign same Excise Group to two different plants within the same company code in SAP.
    Regards,

    Yes you can use but, you shouldn't use same excise group for two different plants in one company code, if their physical location is different.
    As many excise report are fetched on the basis of excise group, there it will show combined values for both plants, whcih may not be acceptable to exices authorities.
    Regards,
    Sachendra Singh

  • New Excise Group for Existing Plant

    Dear CIN Experts,
    We have query, as there is Change in Excise Group for Existing Plant, Question here is weather it is possible from functional part what will be effect on historical data and from CIN [Excise transaction] perspective and how to cope up with new excise related transaction like;
    1) Sales Excise Invoice
    2) Register Updates
    3) Utilization
    Kindly expedite from CIN perspective about the pro and cons for the same.
    Thanks in Advance,
    Ashish

    Hi
    For new Material type account determination there is no requiremnt of gioing for anew valuation grouping code.
    You go for a valuation grouping code only hwen you need to trigger differnt g/L accounts based on the PLant combination.
    YOu can go ahead with the existing account determination by maintaining the new account category reference & valuation classes to the new material type.
    Hope this solves your query
    Thanks & Regards
    Kishore

  • Pricing Schema for Project System

    Dear Sappers,
    I'm configuring Pricing Schema for Project System(PS) module.
    The requirement is, the schema will be in such a way that it supports both excise, CST, VAT and service tax.
    In PS module the user raises a Purchase Order having procurement of material as well as taking service from Vendor.For this in PO he will maintain both material as well as service.
    I'm configuring the Pricing schema in MM - Purchasing - Condition.
    My question is for materials procurement, everything is working fine.But for service respect to activity number I want to maintain service tax and other cess in condition record.
    But to maintain service tax & other cess for activity number, I want the access sequence of sevice to be in Purchasing.I've taken the standard table for Plant, Vendor, Purchase Organinzation and activity number combination from External Service management and making a new access sequence in MM - Purchasing.All fields are coming but for Activity number, it not taking the document structure and showing error.
    How to overcome this??
    Any suggestions will be highly appreciated.
    Warm Regards
    PKB

    Hi Pankaj,
    Thanks for your suggestions.
    As per you reply, the access sequence is already maintain in External Service Management.But I want to bring the same combination Plant, Vendor, Purchase Organizartion and Activity number that is Table 97 to MM - Purchasing - Conditions- Access Sequence.
    I've tried to do it, but when I'm creating in MM - Purchasing, all document structure is copying except activity number.What I analyse the error is due to application area.Activity number is MS (External Service Management) area but i'm trying to do in M(Purchasing)
    Even though when I enter manually MS for the access sequence system is not taking.
    Suggest me.
    Warm Regards
    PKB
    Edited by: Pranaya Barik on Dec 11, 2009 12:09 PM

Maybe you are looking for