Plant Maintenance and ECS SRM

I've been asked to investigate the feasibility and steps involved in integrating Plant Maintenance to SRM.
I've looked at the standrard documentation and it appears that this is pretty straightforward.
Can anyone give me any pointers on the following:
1) What BAPIs etc are used to transfer the PReq from the backend to SRM.
2)What are the require configuration settings ?
3)Are there any attributes that need to be maintained within the org plan?
Regards
Keith

Hi,
In addition to Marcin answer, you can connect your catalog directly to PM in transaction IW31 and IW32.
There is also a scenario to connect PM with SRM without external requirement configuration.
This is the "old way" and "abandonned" by SAP: please see here :
Re: EBP integration with PM and PS
Kind regards,
Yann

Similar Messages

  • Plant Maintenance and Work Clearance Management

    Where can i find functionality info on Plant Maintenance and Work Clearance Management. How can these functionalities be activated  - is there a switch?

    Please go thr below SAP Help links for Plant Maintenance and Work Clearance Management.
    http://help.sap.com/saphelp_47x200/helpdata/en/2b/1b713896fab752e10000009b38f889/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/2b/1b713896fab752e10000009b38f889/content.htm

  • Upgrade on SAP Plant Maintenance and Product Data Management

    Hi Gurus,
    I assigned to a upgrade project for Plant Maintenance and Product Data Managemet modules.
    Please guide me what are the steps to follow and provide more information on this ...
    Thanks in advance!!!!!!!!!
    Regds,
    RK

    Hello Kurni,
    In PDM/PLM latest version is PLM 7.0.
    There are many new functionalities available in this version.
    Earlier version can be accessed from SAP GUI, but the latest one can be accessed from Portal/NWBC.
    DMS side many notes have to be applied as you will be instaling EHP4.0 as part of the upgrade.
    ECM side some standard reports are missing in PLM 7.0, which were available in ECC6.0.
    Regards
    Prasad K

  • Planning for plant Maintenance and CS (MCB)

    Hi there
    We are looking into implementing the Budtet Planneing for Plant Maintenance and Customer Service (MCB). However vi lack som information regarding the complexicity in this solution.
    Does anybody knowledget about the time and resources needed for implementing this?
    Chris

    Hello Chris,
    this is like asking how much a car costs. It's not possible to answer it with a lot more information about the business requirements.
    Regards
    Marc
    SAP NetWeaver RIG

  • Searching for Apps to help us manage employee hours and all mobile plant maintenance and hours any suggestions

    We are currently looking for a way to get rid of paper in our business. We have machines all over the place as well as staff.
    Does anyone have a app that can manage employee hours and would be able to record plant (machine) hours and jobs?

    If you are using Quick books in your company you can search for apps through their system and there is one that integrates with QB15 that is great but i cant remember the name right this second .

  • Plant Maintenance and Service Notification

    WOuld like to ask where in SPRO to correct error in notification "Functional location field must be filled up". This applies to all notification types created by when I checked on SET FIELD FOR NOTIFICATIONS >Field Selection Reference Objects PM Notification. the selected notif type is not included on the influencing list. Please help how to correct this kind of error.
    Thank you in Advance .

    hi
    kindly check once again if the notification type is not specified in the influencing fields then the required field will not appear , also whether the message is standard or Ztype kindly specify
    regards
    thyagarajan

  • Catalog Interface (OCI) -  Customizing for Plant Maintenance order  ERP2005

    Hello Experts,
    we want to use the integration between SRM and ERP2005. In the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/5d/0eba5fa0084247acbb0c04cede18e8/frameset.htm">sap documentation</a>sap documentation I found the following:
    'In the Customizing for Plant Maintenance and Customer Service or in the Customizing for Project Systems, you entered the required data about the catalog that you want to connect to the SAP R/3 system. You can find the corresponding IMG activities under Interface for Procurement Using External Catalogs (OCI).'
    However I can`t find this IMG activities in our ERP2005 system.
    What`s wrong?
    Thanks in advance.
    Regards
    U. Wieland

    Hi! Additional we had to generate the img new.
    Unfortunaetly I haven`t a idee how does this work. (Our sap basis did this.)
    Through the assign from catalog to order type, I think it nessary to use the pm-img-activities...
    Plant Maintenance and Customer Service
    ->Maintenance and Service Processing
    ->Maintenacne and Service Oders
    ->Interface for Procurement Using Catalogs (OCI)

  • Plant Maintenance notification

    Hi all,
    In notification (PM)  the I-button (blue-white) in the reference object screen area is not there for a one of the notification type. User wants this button is to be there. I checked configuration settings , screen category object for this notification type is 0100 (Functional locationequipmentassembly). Please anyone guide me in getting this button in notification. I am new to PM module.

    Hi,
    For that particular notification type you may not have assigned a object information key.
    This can be done in customizing.
    IMG>
    Plant Maintenance and Customer Service
    Maintenance and Service Processing
    Maintenance and Service Notifications
    Notification Processing
    Object Information
    Compare the settings for notification types with those that don't have the icon.
    -Paul

  • Re: Fleet management in Plant Maintenance

    Hi Guru's
    Here i have an issue reg the configuration screens in PM
    In SAP-SPRO---Plant maintenance and Costumer Services, I am not able to find the Screens required for  configuration for FLEET MANAGEMENT i e.,
    1) Set List Processing for Fleet management objects.
    2) Set reference object screen for Vehicles.
    3) Consumption Relevant Counter reading Update. 
    These are mandatory for capturing the cost of the fuel into reports of  Vehicle analysis report.
    Please any one can Send me whether we need go for any Patches or to update any notes.
    Present  i am using ECC-6 EHP-5
    Please reply back ,it is very urgent.
    Regards
    Kumar

    I hope, for the below points there is no separate configuration.
    1) Set List Processing for Fleet management objects.
    2) Set reference object screen for Vehicles.
    For 3) Consumption Relevant Counter reading Update.
    IMG => PM & CS => Information systems for PM & CS => Configure Measurement document update
    I hope, this is common for all the versions. Please check.

  • License Validity in Plant Maintenance

    Is it possible in SAP-Plant maintenance to have a Pop-up or notification to be genretaed in case of expiry of license.
    The license may be of a piece of technical object or the business license to do business for a period of 1 year..
    Please provide a striaght fit solution within Plant Maint module or a workflow...
    Thanks in advance
    Murad Shaikh

    Hello,
    Follow Below Path For SPRO
    Plant Maintenance and Customer Service under--> Master Data in Plant Maintenance and Customer Service --> Basic Settings -->Warranties.
    After Above Setting you have to maintain The Warranty Data for Technical Object (EQ Or FL) TC IE02 or IL02 such as
    Begin Guarantee date & End Guarantee date
    REgards,
    Rakesh

  • Define Purch. Req. transaction type for Plant Maintenance Order

    Hello,
    Does anybody know how i can specify the (default) Purch. Req. transaction type for a Plant Maintenance Order (IW31)? By default it picks up 'NB' but i would want to change this.
    Kind regards,
    Tim

    Hi,
    Go to this menupath spro>IMG->Plant Maintenance and Customer Service>Maintenance and Service Processing>Maintenance and Service Orders>General Data>Define Account Assignment Cat. and Document Type for Purchase Requisitions.Here you can change the doc.type for the PR.
    Regards,
    Venkatesh

  • Plant maintenance Iviews

    Hi Gurus,
    Can we use Business Package Assets to create Plant maintenance iviews?
    Joseph
    Edited by: Anja Engelhardt on Oct 13, 2011 9:10 AM

    Hi joseph,
    You can use this iView to display maintenance-related objects (such as equipment, functional locations, materials, measurement documents, and so on) in the Asset Viewer.
    The Asset Viewer is a display tool that enables simple navigation through complex object relations. You can navigate flexibly within and between objects.
    You can also use object navigator which is a reusable display tool that has been integrated into this iView.
    You can specify which object types can be viewed in the structure view in Customizing for Plant Maintenance and Customer Service under>  Maintenance Roles>  Maintenance Worker --> Asset Viewer  -->Specify Objects for Structure View.
    Thanks&Regards
    AswinChandra Girmaji

  • Plant Maintenance followed by Flexible Real Estate

    We are looking to implement both Plant Maintenance and Flexible Real Estate. We are hoping to first implement Plant Maintenance, and then follow it with Flexible Real Estate.
    Is there any reason we should not follow this logic? Should we implement them both at the same time, or should flexible real estate get implemented before plant maintenance? Will we be creating a lot more work by implementing them separately?
    Reasons why or why not would be very helpful.
    Thank you all for your time,

    Hello
    Follow this link
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/fc/7f383b1b793821e10000000a114084/frameset.htm

  • Using SmartForm for Plant Maintenance service order processing

    Greetings everyone,
    I am working in R/3 4.6C and I have a SmartForm that I would like to configure as a shop paper in plant maintenance and print along with various types of work orders.  However, the config in this area only allows configuration of SAPscript forms with print programs and form routines. 
    Does anyone know if there is a way to configure or convert a SmartForm so that I can print it as a PM shop paper?
    I will definitely reward helpful answers/solutions.
    Thanks,
    Geoff

    Thanks for the quick response, Anji.
    So just to be sure, there is no way I can configure this form to work with the shop paper config, correct?  If I want something to automatically print with different work order types, I guess I have no choice but to use a SAPscript form with a print program?  I am just not clear on what you mean when you talk about the Z t-code, since I never want to execute this form directly, but always automatically in work order printing from IW32 or similar transactions.
    Thanks..
    Geoff

  • Plant Maintenance - Maintenance Order

    While executing the Maintenance Order,
    is it possible at Components Tab for default existing of Item Category 'L'

    hi
    you have option to ,ake default item category against the materila type and plant.
    follow the path to make default values
    Plant Maintenance and Customer Service>Maintenance and Service Processing>Maintenance and Service Orders>General Data>Define Default Values for Component Item Categories-->New entries
    pl try
    ashok

Maybe you are looking for