Plant Maintenance: Capacity planning CM01/ CM07

Hi
In capacity planning CM01, the standard sap shows all the maintenance orders which have system status created. But we would like to look at onlly the released pm order in the standard overview list and detailed capacity list. Please let me know if there is way we can configure it.
Thanks

Hi Nayan202,
You could configure desired "selection set" T.code "CSM1" and then assign this to appropriate "Selection Profile" under initial set.
Hope this helps.
Shahnawaz

Similar Messages

Maintenance Work Center : Capacity Planning CM01

Hello Gurus,
We are using T-code CM01 to determine the Requirements / RemAvailCap of the Maintenance Work Orders in a given Maintenance Work Center.
After executing CM01, the detail capacity list contains Not Scheduled orders( CRTD )and capacity of these not Released orders also taking into consider.
How to restrict CM01 Order selection based on the work order System status or User status ?
I found below discussions on SCN but couldn't get precise answere.
Plant Maintenance: Capacity planning CM01/ CM07
Configuring profiles in CAPACITY PLANNING (CM07)
Please help.
Thanks in Advance
Ashok M

There are a few ways:
Create a new status profile via BS42 and assign the REL status only (see image 1). Then in the CM01 display screen, use menu path: Planning->Selection->Order and enter the status profile created above (see image 2)
Create a new selection combination via OAP0. In the CM01 display screen, use menu path: Planning->Selection->Combination and enter the selection combination created above (see image 3)
The above settings can then be defaulted via the various capacity planning profiles.

Can I do plant maintenance cost planning in functional location wise?

Dear Experts,
My customer plans to prepare annual plant maintenance cost planning in "functional location" wise.
Can this be done?
If yes, what are the steps?
regards,
Abraham

Abraham,
You could do it indirectly in ECC using a cost centre for each FLoc. You can then plan the costs in the cost centre
PeteA

Capacity planning CM01 not displaying PM Order capacity

Hi experts,
I have created one order with the work center and defined operations...... but i am not able to see the CAPACITY REQUIREMENTS in the capacity planning (CM01)............
Please suggest me what should i do for this.............

Hi Maheswaran,
Thanks for the information , in configuration "Capacity Requirement Planning" have been maintained and now i am getting the CAPACITY REQUIREMENTS and CAP. LOAD also .........................but there is one problem i.e. when i am seeing the capacity planning (CM01) , IT IS NOT SHOWING THE VALUES ON THE DAY WHICH IS WORKING actually according to factory calendar FRIDAY and SATURDAY are holiday, but it is showing the value on SATURDAY and not showing the value on THURSDAY that is today........Please see the screen shot also......
what should i do.......

Plant Maintenance Order planning costs transfer to Cost Centers.

Hello,
1. Capacity Planning
I'm trying to get planning information from a PM order back to a cost center.
I have planned operations in a PM order with a valid activity type and the work center is linked to the Cost Center.
But I cannot see any information in KSBL, Cost Center planning report.
I have tried KSPP - Transfer to Cost Center and KSOP - Transfer to Activity based costing.
Both come up empty.
What am I missing?
2. Costing.
I would like the planned costs in the PM order to settle to the cost center plan. But the PM orders are not configured for planned settlement (I believe that's an SAP setting).
How do I get the planned costs into a cost center's plan?
Thank you very much for your help,
Dan.

Thanks, but I'm trying to integrate the planning that happens in a PM order with the cost center. I was able to get planned costs from the orders via S_ALR_87012993.
the lack of planned settlement in a PM order is annoying. We do a lot of work on PM orders and settle actual costs to cost centers. It would be nice to use that same functionality (Operations, Components, task lists) to be able to plan costs and settle the planned costs to cost centers. Internal Orders can settle planned costs to cost centers, why not PM orders?
I believe the KSPP transaction helps to link the two objects somehow, but I can't get it to work. If anybody has any insights, that would be great.
Or should I be pursuing something else?
Thanks.
Dan.

Capacity planning ( CM01 ) across Plants

Hi all
I have a scenario where a material can be manufactured across Plants as an example
Plant1 - Work Center ( WC 1)
Plant 2 - WC2
Plant 3 - WC3
I want to look at capacity across all the 3 work centers at a group level so that if WC1 is overloaded then I can shift my production to WC 2. I want to use a 'pooled' capacity concept. If I use Work center heirarcy then I am restricted to creating a heirarcy at a Plant level.
Is there a way I can pool capacity of work centers in different plants into one pooled capacity?
thanks a bunch

Hello
1)Using CM50 you will get details capacity load irrespective of plant,just u have to enter the work center and execute it will display the work center wise capacity detail
2)Using CM21 transaction enter only work center and execute it will display the planning table with order number details on which date work center is loaded. So manually u can allowcate the operation to the particular work center
I think this will be helpfull to u

OPU5 settings and Capacity planning-CM01

Hi All,
I have a confusion while configuring the settings for scheduling for planned orders in REM environment PE order type, when i select the scheduling and capacity requirements in DS section system shows me capacity requirements in CM01,CM50 reports and also DS tab in planned order but when i deselect the same check boxes there si no data in CM01, CM02 or CM50,
If I need to generate the CM01, etc reports in REM environment , then do i need to select DS check boxes also?
My OPU5 settings are as attached in this case CM01 reports are fine.
Regards,
Anupam Sharma

Hi Anupam,
Screen shot is missing. Rate based scheduling is fine for REM.
Create a "Run schedule" planned order and schedule it via rate-based scheduling.
In transaction OPU5, choose order type PE and the plant you use.
Choose "Details" and in the field "Scheduling level", set "1 Via rate-based scheduling" and save the change.
For more information on this visit the following links
http://help.sap.com/saphelp_47x200/helpdata/en/8a/a58a864adc11d189740000e8322d00/frameset.htm
Levels of Scheduling - Planning Process - SAP Library
Regards,
R.Brahmankar

Capacity Planning CM01 Question?

We have a production order schedule for a workcenter over 3 Days.
The workcenter capacity is 15.74 HR
When i run CM01 without any Qty confirmed.
Day 1 has Requirements as 14.24 HR
Day 2 has 15.7HR
Day 3 has 15.7 HR
After i did a confirmation for Qty 1000.
Day 1 has 13.28 HR
Day 2 has 14.67 HR
Day 3 has 14.67 HR
My questions is why would capacities for Day 2 and Day 3 reduce. All the hours should have been consumed from Day 1 ?

Please check your order. It must have been scheduled over >= 3 days. Thereby adding capacity requirement over 3 days.
When you confirm the order, where confirmed order quantity is equivalent to 3 days of your capacity. Thus system reduces the capacity requirement from 1st Day and subsequently from next days also.
Thanks

Capacity Planning CM01

Hello Experts,
The required hours of a production order are the actual hours and not the remaining hours. So if the order has 8 hours and there is already 6 hours booked, I want to see the remaining 2 hours and not the complete 8 hours. How to do that? I have tried a lot off things but donu2019t get the result that I want?
Mukesh

Not clear how you have booked 6 hours out of 8. You mean dispatched? Ot they are in different operations and you have dispatched the first ? Or you have confirmed 6 hours as partial confirmation in an operation having 8 hours as planned time ?

Planning Capacity using CM01 and CM07 transaction

Hi,
there are two kinds of sales order in our company: the "confirmed" order sales and the "not confirmed" order sales. The both we need to plan in PS and need use the factory capacity. But when we need to analyze the capacity planning of these projects, it's interesting if we can separates both types of projects, the "confirmed" and the "not confirmed project". And we have to change the projects from "not confirmed" to "confirmed" when a costumers really confirmed a sale. The input in CM07 transaction that I use is the work center.
I think this case is very common in the companies since there are situations that it's necessary to use the factory forces even a order sales is not confirmed but probably is going to. Than we need to change this project to "confirmed" and is going to show us in CM07 as a confirmed project.
Thanks,
Tiago

Try this function module,
CLOI_WC_CAPACITY_READ Similarly
Please search in SE37 using f4 by giving the capacity in the description field and search.
there are many function modules are listed for capacity related one , then try giving your input value and find the output you are expecting...
Thanks.

Capacity Leveling vs. Plant Maintenance

What is the difference between Capacity Leveling Planning Tables (CM21, 22, 27,28,31,23) and Plant Maintenance Planning Tables (CM33, 34, 30, 24)?
In what type of scenario would I want to use either one? What would the end result of utilizing these tables be?

Hi
Mark the control key for generating capacity requirement.
Give the formula SAP008 in Work Center Capacity Tab.
Use CM01 to check Capacity Planning
Use CM22 for Capcity Levelling.
Explore these options
Regards
KG

Plan cost in Plant maintenance order

Hello,
I need to show plan cost in plant maintenance order on the report. It appears in the cost tab (overview tab inside the cost tab). Please let me know if you know any function module.
Regards,
Eswar.

Try
CALL FUNCTION 'PM_WORKORDER_PLAN_COSTS_SET'
Standred program is using this FM and it has table " PMCO "
include = LCOIHF2Y
Hope thisll give you idea!!
P.S award the points.
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise"

Plant Maintenance - Linkage between Task List and Maintenance Plan

Sir,
In Plant Maintenance, I have an equipment for which there are 9 maintenance activities that have to be performed every year. Out of these 4 activities will be carried out every month. 1 activity will be carried out during the months of February, June and October. 5 activities will be carried out only in the month of December.
I need to create Task List for all these activities and subsequently create Maintenance Plans for all these Task Lists.
Can I group all the 4 activites which will be carried out every month into one single Task List, with separate operation nos and time against each activity?. I don't know whether it is correct or not.
If I use the above method I can create 3 Task Lists for this particular equipment with same Group no and 3 Group Counters.
How to create Maintenance Plan for the above scenario?.
Eventhough, 4 activites are carried out every month and they have been grouped into a single Task List (Group counter 1) and if these activites are carried out on different dates within a month how can I create Maintenance Plan and subsequently create a Maintenance Order?.
I need some help in this regard. A detailed reply will be helpful.
Can anyone throw some light in this regard.
Regards,
R. Vijayakumar

you need to create one task list with a maintenance strategy with packages and hierarchy to outline the work requirements i.e. some tasks to be carried out 3 monthly some 4 monthly etc, and also if common tasks appear in 3 monthly package vs 4 monthly package then to suppress the duplicating task
you would then define a strategy based maintenance plan and run it to get the respective maintenance orders

Planning in Plant Maintenance using MCB.

Hi Experts,
My client is into Mining Industry. This is a Greenfield SAP Implementation.
Client is not clear with the Planning requirements in the Plant Maintenance module.
Therefore, I have suggested that all the Standard Businenss Content Extractors and relevant Queries will be delivered as part of Maintenance Planning.
I tried but could not find any Plant Maintenance Planning (MCB) related DataSources and Queries in the BI 7.0 Business Content page @ http://help.sap.com/saphelp_nw70/helpdata/EN/f6/7a0c3c40787431e10000000a114084/frameset.htm.
Could you please help me with this?
Thanks in advance,
Chandu

Hello Chandra,
We are in the Health Care sector and I have a similar requirement as of yours. We are not really sure what all we would require from PM, so we are thinking to go ahead with all the Business Content Reports and I have been asked to install all the Cubes, DSO's, Extracots, Reports Etc, Etc....
I just also have the above link in my hand and it doesn't give us a whole lot clear picture..? So how did u carry out with your requirement? What all you ended up installing? Please do share it, will be a great help for me.
Thanks in advance, Venu.

Capacity Planer Group --- Maintenance work center

Hi,
I have a query
1. like do we have to create capacity planner groups same as the planner groups in equipment master data....Do they have any link??
2. What would be the start time and end time in maintenance work center, for 24 hrs open manufacturing industry with 3 shifts???
thanks
DM

Hello Deepak,
There is no relation between capacity planner grp & Maintenance planner group...These are 2 different things..
Now the work centers can be defined for the technicians if HR module is not implemented...
To perform the capacity planning for the technicians, there daily working hrs must be maintained in the system..Though the maintenance is working for 24 hrs,Single technician cannot work for entire 24 hrs..
Hope this will help..
Thanks

Plant Maintenance: Capacity planning CM01/ CM07

Similar Messages

Maybe you are looking for