Plant Maintenance Datasource for MTBF, MTTR, Availability, Performance

Hi Gurus,
I'd like to ask if you know what's the perfect datasource to you for plant maintenance if I were to measure MTBF (Mean Time Between Failures) and MTTR (Mean Time to Repair)? Also if I wanted to measure Availability, Performance and Quality. Thank you in advance.
- Kit

Hi
This topic help me a lot in developing my project. I will contribute more when I finished it.
Apart from that, you also can ref more resources at: [maintenance KPIs|http://keyperformanceindicators.info/maintenance-kpis/]
Best rgs

Similar Messages

Plant Maintenance Datasources and Cubes

Hi Experts ,
I need to extract Plant Maintenance Data and generate Standard Reports on PM . Client want to see standard reports on PM.
Can anyone plz guide me what all cube's in PM module supports what all datasources for those respective cube.
Thanks in advance
Regards,
Mahesh

hi
For data sources you can find in rsa5/rsa6 t-code.
for those particular datasources you can find the cubes in business content ( rsorbct t-code ) if you select before and after option under grouping then you van find both the cubes and standard reports. based on the requirement you can choose the standard reports.
thank you

LO Plant Maintenance History Data Loading

Hi Gurus,
I added a couple of Z fields to one of the Plant Maintenance datasource. In Prod System I already have data till September 5th 2007. I need to delete data in the cube from Jan 1 2007 to today and relaod the data from Jan 1 2007 to Today so that the newly added are populated in the cube from Jan 1 2007 to today.
What will be the best procedure to do this with out disturbing the Delta and with out asking any downtime or what is the best procedure to do this. Please reply.
Thanks in Advance.
Raj

There is no way to have zero down time i.e. reporting will be impacted if you want to load historical data into newly added field.
If you are on BI 7.0 you can use remodelling but the limitaion is that the new field values can be derived from existing data only . I am not sure where your new field is getting data from. But with this option also you need a downtime as whole table will be converted( you should compress all requests to minimize the table conversion time ).
If you are on BW 3.5 you have to delete all data and reload it. To minimize down time delete all data from PSA -> bring Full Load with new field to PSA only. Delete all data in Cube . Delete Initialization . Load the full load from PSA to Cube . Initialize without data transfer and then you are ready to go . From time full load is extracted from R3 to delta init there should be no posting in R3 .
Regards
Sanjay

Creating Z report for material stock (plant maintenance module)

hello,
we are implemented Plant maintenance module (SAP PM) in our organization.
our requirement is to create a stock report which will incldue
followings:-
1)material number
2)plant number
3) storage location
4) material type
5)valuation type
6)Opening Stock
7) OpValue
8)Received Stock
9)   ReceiptValue
10)   Issue Stock
11) IssueValue
12) Closing Stock
13) Closing Value
we want above details in ALV grid format.
to gert all the details for perticular material, we calcute closing stock and closing value in following manner:-
opening stock + received stock - issue stock = closing stock
opening value + recipt value - issue value = closing value
we are unable to find table name for accessing opening stock, received stock , issue stock & opening value ,recipt value , issue value from system. please suggest table name information for getting above details for creating Z report

Dear friend,
Before to make a decision to bulid a custom report make sure you have checked out the following standard transactions:
MB5T Stock in Transit
MMBE Stock Overview
MD04 Stock/Reqs list
MB53 Plant Stock Availability
MB52 Warehouse Stock
MB5M Expiration Date list
MB5B Stock for Posting Date
MB5T Stock in Transit
MBBS Valuated Special Stock
MBLB Stock with Subcontractor
The possible tables are:
MARA, MARD, MARC, VBEP, VBAK(VBAP), EKKO(EKPO), EKBE, EBAN, EBEW, MSEG, MKPF,...
Good luck!

Plant Maintenance Order Act Costs-0PM_OM_OPA_2 or 0CO_OM_OPA_6 datasources?

To get Actual/plan costs for the value categories in Plant Maintenance workorders, which DataSource would I use? The 0PM_OM_OPA_2 or 0CO_OM_OPA_6?
What is the difference? The 0CO_OM_OPA_6 is already pulling data for Internal orders in our system.
How can I check to see if this is also pulling in Maintenance Order data?
Since 0CO_OM_OPA_6 is already pulling in data, does it make sense to use this DataSource instead of activating the 0PM_OM_OPA_2 data source?
Please advise.
Thanks.

Sorry, I should explain my requirement in detail.
I should not use the LO Cockpit 2LIS_17_13HDR or 2LIS_17_13OPER datasources. But I need to get the WorkOrder Header and Detail data (operation lines with confirmations, AFVC and AFRU tables) along with the actual costs to create a custom BEx query for the work order header/detail and actual costs.
My initial thought was to enhance 0COORDER_ATTR and get the WorkOrder header data. 0COORDER does not have the Equipment or Functional Location. 0COORDER_ATTR would need to be enhanced to add these.
For Operation line and confirmations data, write a Generic data source to populate a DSO. Then use the actual costs data coming from the 0CO_OM_OPA_6 datasource.
After further thought, I am wondering if I can use 0PM_ORDER as is without enhancements and use the 0PM_OM_OPA_2 to get the actual line data. Also, here I have a question. 0PM_OM_OPA_2 is used to populate 0PM_DSO4 DSO along with 3 other datasources, the 2LIS_17_13HDR , 13OPER and 1 datasources. Since I cannot use the LO datasources, can I poulate the DSO with just this one datasource(0PMOM_OPA_2)?
For operational lines I would still write the generic data source (a view might suffice).
Experts out there, please let me know if I really off here, with the design.
Really appreciate any thoughts.
Thanks.

Standard Web service for Plant maintenance

Hi Gurus,
I am new to Web services.Could you plese let me know is there any standard web services for Plant maintenance?
Thanks & Regards
Bhuvana

Hi,
This is the mail which i got from Client.
We have a prospect wanting to see a proof of concept (and pay for it) of SAP -GIS integration using web services. No specific requirement. Fetch a bunch of work orders from SAP using web service and display on a map - can be the POC.
Please review the attached doc. Figure out whether any standard web service is available, if not a BAPI can be converted to web service quickly.
Attchment contains Utilizing State oriented Communications
for Web Services based on BAPI With Microsoft Visual Studio
2005.U can check it in Google with the same name.
They just asked about is there any Standard web services available for Plant maintenance.
Regards
Bhuvana

Query on MCJC - MTTR/MTBR Functional Location report in Plant Maintenance

We have recently upgraded our SAP 4.7 system to mySAP ERP 2005 ecc6.0.
We are facing problem in report derived using tcode'MCJC' in Plant Maintenance.When we execute MCJC (MCJC - MTTR/MTBR Functional Location ) transaction, there is no data appearing in the report output.This report is used to get the functional locationwise data from maintenance order. The transactions are entered for creating maintenance order & notifications through IW31. This is getting updated in table s070.
This is a standard report and was working fine in SAP 4.7.

Hello Mr Subrahmanyam,
When you are saying that the Equipment is in Breakdown, it may happen that the whols FLock could be considered in Break down, but not necessary,
say we take an Example of a Work Shop, where Mechanical Workshop is the Functional Location and it has N no of Equipments like Lath, Grinding m/c, Welding M/c, Shaper Etc.... in this case can you please tell me if only one of the above mentioned Equipment is under Break down can the Whole Mechanical Workshop be termed as under Shut down.
What you are saying is correct in the Line Production, where we can have the Predessing as well as the Succeding Equipments, there for the Critical Equipment you generally have a Back-up Equipment, may be possible the capacity of the Backup might not be same as the mail Equipment, but still it can serve the Purpose for the Time Being. in that condition how can you say that the whole FLock is in Breakdown.
Hope I am able to clarify.
Regards,
Yawar Khan

Internal Order Budgeting for HR and Plant maintenance

Dear All,
I am using internal order for budgeting control. I want to use internal order budgeting for Payroll also. How do i assign internal order for the same.
I want to check budget through internal order for plant maintenance order also. At the time of issue of material to PM order or at the time of settlement.
regards
ranga

Budget Profile:
IMG => Internal Orders => Budgeting and Availability Control => Maintain Budget Profile
Make sure activation type made to 1.
Availability control settings:
IMG => Internal Orders => Budgeting and Availability Control => Define Tolerance Limits for Availability Control
Regards,
Ravi

Goods issue for plant maintenance order

Goods issue with ref to plant maintenance order( Componenets of the order) is not possible in transaction code MIGO. Error message " MIGO is not possible for the refurbishment order".
Goods issue for the same order can be posted with transaction MB!A.

hi santhosh
kindly check the order type .i think you are using MB1A for refurbishment process.but it is not possible.only maintenance order can be posted via MB1A
follow the procedure for goods issue in refurbishment order.
Choose Logistics ® Plant maintenance ® Maintenance processing ® Completion confirmation ® Goods movement ® Goods movement.
The entry screen for a goods issue appears.
Choose the pushbutton For order.
Enter the relevant order number in the dialog box and choose Continue.
An entry screen appears.
Choose Copy.
The Maintain Serial Numbers dialog box appears.
Choose Reference document.
Enter the order number in the Refurbishment order group box and choose Execute.
A list appears with the planned serial numbers for the refurbishment order.
Check the selections of serial numbers, for whose material you want to post a goods issue, and choose Copy.
The serial numbers are copied into the Maintain Serial Numbers dialog box.
Choose Exit window.
The goods issue is posted.
regards
thyagarajan

What are the standard tables for plant maintenance in r/3

I need the list of standard tables for plant maintenance in r/3. and also
is there any way we can find the field name and table which it belongs to in r/3, based on the description of the field.

I NEED THE FIELD NAMES FOR FOLLOWING FIELDS AND CORRESPONDING TABLE NAMES
Equipment status
registration number
insurance type
insurance type description
registration date
expiry date
insurance companies
expiry date
policy number
amount insured
premium paid
created by ..so ..on
for our report in PM .. insurance data report
THANKS

Settings for costing data in order types for plant maintenance

i want to know the purpose of settings for costing data in order types for plant maintenance. do we need to do it for sure i mean are those settings mandatory to analyze the costs on work order

Yes you need to maintain those settings, as the plant maintenance orders are also considered as cost objects and in order for you to post any cost, you need to have a cost object. Unless you maintain these settings, the cost you posted cannot be settled to a cost center.
Assign points as a way to say thanks.
Madhav Nanduri

Origin Object Type for Plant Maintenance Orders in Profit Center Accounting

Hi,
I want to make a selection for plant maintenance orders in transaction KE5Z, report for line items in Profit Center Accounting. When checking possible input options for the selection field <b></b>Origing Object Type<b></b> the system shows value 15 for Maintenance Orders. However I discovered in our system the maintenance orders are reported as Origing Object Type 03, which is Overhead Orders according to the selection list. So I cannot distinguish between overhead orders and maintenance orders in this report.
What is the cause our maintenance orders are assigned to Origin Object Type 03 in stead of 15 and what is the customizing transaction to correct this ?

Looks like, this is no longer supported. Refer to note 168004 and 102434.
Cause and prerequisites
These functions were not programmed to meet the above requirements.
As of Release 4.0, the object type is transferred directly.
Solution
Once you have implemented the advance correction. the origin object type 'Overhead cost order' (03) is assigned irrespective of what is the SCOPE for orders.
As a result of implementing this note or as of Release 4.6B, the order category distinguishes between overhead cost orders and production orders in the origin object type. In this case, the following origin object types result (as described above in 1.):
Order category 04 to 10, 40 => 04 (production order)
All other order categories => 03 (overhead cost order)
The logic that the origin object type was set depending on the object class (as described above in 2.) is no longer supported. The object class can be evaluated separately in Reporting. -
The corrections of this note refer in Release 4.0B to the corrections from Note 102434.

Warranty for materials in Plant Maintenance

Hi Experts
I am trying to explore how warranty could be used for spare parts in PM. I did following and seems that it works the same way as it works for equipment . meaning that it shows a dialog box when creating Notif and order.
Step1: Create Material Master
Step 2: Create Material Serial Number (Equipment master is created in background)
Step 3: Add warranty information in equipment
Step 4: Create Notification or work order, the warranty information is displayed
My Questions is on Goods movement and benefit by using serial number. I have created 03 serial numbers (1,2 and 3) by using TX IQ01. I have two cases:
Case1: what are the benefits of serial numbers created above without activating serial numbers in Inventory management. How it helps in Plant maintenance
Case2; Assming we activate serial number mgmt in IM ( by assigning serial no profile in material master). How does the serial numbers created above (1,2 and 3 by using IQ01) tie to Inventory management serial numbers. When I receive material for a purchase order how the serial numbers are assigned and tie to serial numbers created by IQ01.
Appreciate your help. Let me know if I am not clear.
Thanks
Gaurav

thx

Catalog Interface (OCI) - Customizing for Plant Maintenance order ERP2005

Hello Experts,
we want to use the integration between SRM and ERP2005. In the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/5d/0eba5fa0084247acbb0c04cede18e8/frameset.htm">sap documentation</a>sap documentation I found the following:
'In the Customizing for Plant Maintenance and Customer Service or in the Customizing for Project Systems, you entered the required data about the catalog that you want to connect to the SAP R/3 system. You can find the corresponding IMG activities under Interface for Procurement Using External Catalogs (OCI).'
However I can`t find this IMG activities in our ERP2005 system.
What`s wrong?
Thanks in advance.
Regards
U. Wieland

Hi! Additional we had to generate the img new.
Unfortunaetly I haven`t a idee how does this work. (Our sap basis did this.)
Through the assign from catalog to order type, I think it nessary to use the pm-img-activities...
Plant Maintenance and Customer Service
->Maintenance and Service Processing
->Maintenacne and Service Oders
->Interface for Procurement Using Catalogs (OCI)

Transaction for Mass processing of PM(Plant maintenance) orders

Hi all,
Pls let me know if there is any standard tcode for for Mass processing of PM(Plant maintenance) orders
I checked for COHV ,but it's appplicable only for produciton orders it seems
Costing has to be recalculated for all the orders of order type PM02 for financial year 2008-09
Awaiting eagerly for your reply
Thanks,
SVP

Hello,
Please try using IW38,IW39
execute the screen and then you get the option for releaseing , teco etc
Regards
gajesh

Plant Maintenance Datasource for MTBF, MTTR, Availability, Performance

Similar Messages

Maybe you are looking for