Plant Parameters in GR Conversion

Hi All,
During GR conversion, we got the message,
"Plant parameters not maintained"
Any guess which plant parameters will have effect on GR conversion?
Thanks

How did you create a Plant. I mean to say Whether you have created a Plant with reference to another Plant. If this is the case Plant parameters will be automatically copied.
If you created a Plant using Create function You should maintain All the Plant Parameters in the SPRO -> IMG ->Mat Mgmt -> Inventory Management & Physical Inventory -> Maintain Plant parameters.
Reg,
Ashok
Reward if Useful.

Similar Messages

  • MRP Plant Parameters

    Dear Sir,
    What are MRP plant parameters?Pl.Explain in details?
    Points will be rewarded......

    Hi,
    The In this step, you can maintain all the plant parameters
    1.Environment : Here you define the number ranges and the Backorder checking rule.
    2.Master data: Like mrp controller,Speical procurment type and the Float - scheduling marging key can be configureed here
    3.Conversion of planned order to productin order /Purchase requistion can be configure here
    4. Planning urn : the selection of BOM ,Bom explosion,available stock etc and lot more can be configured here
    Even though we have separate areas where we can define each of them separately here we can define most of the mRP related to single plant can be configured at this one.
    Kindly let us know if this solves your query or if you are looking for anyother thing.
    Reg
    DsK

  • Field selection for plant parameters

    In plant parameters - in external procurement tab-i want to change field selection for Account assignment for non valuated materials field to optional,.Presently it is required field
    can sombeody tell me path

    Hi
    Go to SPRO>Production>Material Requirements Planning>Plant Parameters> Carry Out Overall Maintenance of Plant Parameters and execute.  (Transcation OPPQ)
    Select Maintain and give the plant
    Select External procurement Tab and select Unknown account assignment.
    But, you need account assignment for non-valuated material for external procurement.
    Hope it solves your issue.
    regards,
    Edited by: Raju DS on Dec 4, 2008 7:47 AM

  • Consequences of maintaining Plant Parameters

    Dear All,
    I would like to know that what could be the consequences for maintaing plant parameters under ' Inventory Mangement and Physical Iinventory ' for the plant which is copid from the existing plant for which plant parameters have not been maintained.
    This is what SAP is saying (the extract is from spro implementation guide)
    Plant Parameters
    In this step, you make the general plant settings for
    Inventory Management. All settings are also contained in the individual steps of the Implementation Guide for Inventory Management. If you want to allow negative stocks in your plant, you have to set the XBKNG indicator in addition to the settings in this step. To maintain this indicator, choose the step Goods Issue/Transfer Postings -> Allow Negative Stocks in Customizing.
    Recommendation
    SAP recommends that you do not make the plant settings here, but in the individual steps of the Implementation Guide, so that the settings here are not without a context. Dependent settings are not contained in this step.
    Activities
    If you have created a plant in the enterprise structure using the Copy plant function, you do not need to make any settings.
    If you have created a plant manually, you have to create a new entry for the plant parameters.
    What should I do? Should I go for it or not?
    Thanks and regards,
    Saleel Kulkarni

    Hi,
    If you created a plant by copying the standard plant 1000 , the plant paramaters foe inventory management will automatically come to your newly created plant. N o need of creating parameters separately in inventory management. If you create the plant without copy function you  have to maintain plant parameters. I hope this will help you. Thanking you.

  • Plant Parameters

    Hi ,
    Pls tell me how to maintain plant parameters?
    And who is defining this Plant parameters PP or MM?
    Regards
    Gitesh

    Dear,
    Plant parameter you need to define in OPPQ. As it is relevant to MRP so its PP person responsibility but it is integration between PP and MM like number range for Purchase requisition. availability check etc.
    Hope clear your Doubts.
    Regards,
    R.Brahmankar

  • Difference between To maintain and initial in plant parameters in MRP custo

    Hi, Gurus,
                  Can anyone explain me about the difference between status showing
    to maintain and initial in plant parameters in MRP customization
    Thanks & Regards
    sathyanarayana

    Dear Sathyanarayana,
    In T code OPPQ - Maintain Plant Parameters,it does not
    mean we have to maintain a value in all the parameters
    present under different tab keys.
    IF you check generally MRP controllers,Floats,Number
    Ranges,BOM/Routing Selection,Planning horizon,Available
    stock these values will be maintained.
    Some of the settings like Start in Past will be as Initial(not
    allowed in the past).
    IF you use some special procurement key,then that settings
    has to be maintained.
    I hope this will help you.
    Regards
    Mangal

  • Difference between MRP group and plant parameters

    hai friends,
    please let me know, what is the main difference between the MRP group and plant parameters?,
    what are the extra activities or features with one, when compare to the other?.
    Edited by: Mourya.v on Sep 22, 2010 6:36 AM

    Dear Mourya,
    Why to assign MRP group? - If planning for each plant is not specific enough for your purposes and you would like to assign
    control parameters that differ from the control parameters defined for the plant to certain material groups.
    1.For all materials without an MRP group, the system uses the plant parameters that is the settings present in OPPQ, or the
    entries in the initial screen of the planning run.
    2.For all materials with an MRP group, the system uses the parameters recorded in the MRP group that is the settings in OPPR.
    3.The MRP group is an organizational object that can be used to allocate special control parameters for planning to a group of
    materials. You can maintain MRP groups if planning control per plant is not precise enough for your requirements and you want
    to allocate certain material groups different control parameters from the plant parameters. For this purpose, MRP groups are
    defined with these specific control parameters and are assigned to the material in the material master record (MRP 1 screen).
    4.The MRP group, groups material from the material requirements planning point of view to allocate them control parameters for
    planning.The control parameters include the strategy group, the planning horizon and the creation indicator for the planning run.
    Also check this link [Settings in OPPQ & OPPR|oppr and oppq]
    Regards
    Mangalraj.S

  • About plant parameters

    hi
       everybody
        plz. tell me
      wat is mean by plant parameters
      whrer we maintain it
      wat functions or values we maintain for this
      wat it effects in SAP
       where we use it
       give details
       thanks in advance

    Plant parameters carries important control parameters during MRP run
    when you convert planned order into  a prod order, the order type is copied from the plant parameters (oppq>>planned order coversions)
    During MRP run ( if MRP run type is NETPL - Net Change Planning with Plannign Horizon), the planning horizon period
    is defined in the Plant Parameters (OPPQ>>Planning Run>> Planning Horizon)
    If Order start date is in the past, the system automatic does forward scheduling. In some scenarios if its ok to
    have order start date in the past then you make setting over here (OPPQ>>Planning Run>> order start in the past)
    Like wise, Special Procurements key from issuing plant are maintained in the plant parameters
    SMK is also maintained in the plant parameters
    Under the setting of Available stock, what type of stock you consider as Available stock ( like Stock in Transfer, Blockedd Stock, Restricted Use Stock) is considered  as
    available stock
    The plant parameters are maintained in OPPQ
    Also, Before maintaining MRP plant parameters, you need to activiate MRP for the respective plant in OMDU

  • MRP SPRO- Plant Parameters-Direct Procurement

    In the spro Plant Parameters-Direct Procurement
         Direct procurement only when creating production order
    1     Trigger direct procurement in requirements planning
    2     Direct procurement only when creating production order
    3     Trigger direct procurement in requirements planning
    Here 1,3 are seems to be same
    thanks
    K.Prabakaran

    hi
    it looks like even 'blank' & 2 are also same similar 1 & 3..
    but, options description clearly mentions the usage..
    Thanks
    JK

  • Carry out plant parameters

    Hi Gurus ,
    In SPRO -> MM-> Consumption based planning ->plant parameters -> carry out overall maintenance of plant parameters.
    I am copying the plant parameters from plant 'X' to plant 'Y ' . But  both of these plant are from different company codes .
    What is the impact if the two plants are from different company code ? what changes do I need to do in plant 'Y' parameters after copying ?
    Please explain in detail
    Regards,
    Saurav

    Here is used to specify plant parameters for the material requirements planning, I also don't see the potential impact which might caused by different company codes.
    In
    Enterprise Structure
    Definition
    Logistics - General
    Define, copy, delete, check plant
    You could copy plant refering to template, which has company and plant's combination.
    Regards
    Lauren

  • PP- Authorization check to set plant parameters

    Hi team,
    I have created Ztransaction to maintain some plant specific parameters. I have assigned this new ztransaction to single role. Currently i have 12 plants and the user is requesting that only the respective plant users can able to maintain the entries for only the respective plant and not for all plants.
    How to implement this?
    your input will be very much appreciated.
    thanks
    psk

    Hi,
    As per my undestanding it's not fesible to define user-specific roles in SAP.
    You can have SAP process-specific roles like purchasing/production/sales etc.
    Each transaction related to above processes will have a authorization object linked to it which further will have different parameters on which we restrict the authorizations to users like plant/pur org/sales ord etc.
    So looking at your scenario, define Plant specific roles with required authorizations and assign only roles of Plants to which you think that a user should get access.
    For more inputs talk to your basis consultant.
    Hope it will help.
    Regards,
    Anup

  • BAPI Receives unreadable parameters after unicode conversion

    Dear All,
    I have a strange issue, which i am stuck with and need your help to solve this.
    I have a BSP Application which resides in my BW Production system and it calls a custom BAPI in R/3 to fetch list of materials based on material-text search as one of the parameters. This used to work properly before our R/3 got upgraded to ECC 6.0 with unicode conversion.
    Both BW and R/3 are unicode systems now. But, doing external debugging i found that the parameters that i am sending through BSP to this BAPI are ok on BW side but, when it reaches R/3 it is getting converted to some unreadable characters due to which the BAPI doesnot return correct results.
    Please advice where does conversion is happening and how can this be solved. I need immediate help as I am helpless and its a production issue...
    Thanks,
    Chandan

    Hi Chandan,
    please make sure that in transaction SM59 on both sides (BW and ERP) the rfc connections are defined as Unicode.
    Best regards,
    Nils Buerckel
    SAP AG

  • MRP Group Parameters VS Plant Parameters

    Is working with MRP group mandatory in MRP? If we do not maintain MRP group do we lose any advantage?

    Geetika,
    You lose some flexibility.
    OPPQ settings are plant wide.  That means that everything you set here will affect all MRP materials that are extended to that plant.
    OPPR allows you to have differing settings within a plant.  For instance, you may have different types of production orders you wish to use, depending on the material.  You may wish to use different Production order availability checks within a plant.  You may wish to allow some orders to start in past, but not others.  You may wish to have differing planning horizons or different scheduling horizons, depending on the material.  These differences can all be accommodated within one plant by use of MRP groups.
    I have seen plants set up both ways.  It really depends on the requirements of the business.  I don't make that decision until all the client's requirements have been gathered, and I am deciding how complex the solution needs to be.
    Rgds,
    DB49

  • In plant parameters how the start date in past will be applicable for order

    Hi All,
    Can any one explain me in detail start in past for plant parmeters (OPPQ).
    Regards
    sailendra

    Hi,
    Start date of order proposals allowed in the past
    This indicator defines that the system does not automatically switch to forward scheduling if the order start date lies in the past for determining the basic dates. With this indicator, backward scheduling is always used to determine the basic dates, even if the start date lies in the past.
    e.g Bacward scheduling type, Today date is 08.06.2009
    If u give basic finish date say 25.06.2009,and system propose you basic start date in 06.06.2009. That is 06.06.2009 is lies in past date.In this case system propose you forward scheduling.Means order basic start date is 08.06.2009 .If you don't want to system propose you for forward scheduling tick mark Start in past in OPPQ.
    Hope this clear you.
    Regards,
    Raja.

  • MD04 Problem(MRP Parameters for plant not maintained)

    Sir in tcode MD04 i am getting error message no. 61273 (MRP Parameters for plant not maintained).What to do?
    i am online.

    Hi
    Maintain plant parameters in T code : OPPQ
    or copy plant properly
    Tarachand

Maybe you are looking for

  • Bizarre-Screenview suddenly larger than display, doesn't fit

    I was working in FCPX, I thot I'd hit control+V, when suddenly the screenview is magnified and doesn't fit on my MBPro's display. By moving the cursor to the edges I can make the screenview move to the edges and see everything but why is it suddenly

  • Price updation in Material Master after confirmation

    Dear Gurus, When we create a production order for Semi finished which is maintained with Moving Average Price(MAP) in material master and we do confirmation of the order with "CO15'. My client wants after goods receipts against 101 movement type the

  • Application makes a sound when clicking alt + any key

    I have an EventListener that catches the key down and key up events to see if Alt is being pressed for certain hotkeys. I noticed when you hold down Alt + anykey the application makes a sound. I thought this may have been from what I had overwritten,

  • Inspection lot on transfer postings

    Hi colleagues, I would like to know your opinion about a problem that I don't know how to solve. Is it possible to create an automatic inspection lot on transfer postings between different storage locations? By the moment, we're creating the automati

  • SPLIT the cell in either template or table horizontally

    Hi ,            Hope you all doing well,            Can any  body let me know how to split the cell in eithe template or table horizontally, what i mean to say in detail is that i have created three cells using two lines  types, which it gave be 3 bo