Plant Specific Setting in QM

Hi ,
In template roll out projects , could you please suggest what all plant specific configuration in QM needs to be taken care?
The processes to be there are - Quality Inspection & Quality Notification. I did not find any plant specific setting for these two processes and it seems that the configuration already there can be used for the new plant.
As per my understanding, there will be not much of configuration to be done except for basic setting at plant level. ( since all the processes will be same and no additional setting will be required apart from the plant specific settings).
Looking forward for your inputs.
Thank you !
Regards.

Yes Once you cover basic setting in QCC0 ,don't need much to do in rest as most of the things are already exists and maintained at client level .

Similar Messages

Plant specific BOM creation SPRO settings

Hello,
My requirement is User must be able to create plant specific BOM creation. For this, Do we need to do any SPRO config in Material master side? or any other settings needs to be done? Kindly let me know... Thanks!!
Regards,
Saravana

Hi Saravana,
As such there is no SPRO setting for it.
Please check the authorization object C_STUE_WRK -CS BOM Plant (Plant Assignments)
Regards,
R.Brahmankar

Plant specific vendor data

Hi,
In vendor master is it possible to maintain plant specific data for a vendor below the company code & Purchasing Org level?
Ajay

Hi,
In addition to the data that is valid for a purchasing organization, you can maintain certain purchasing data or partner roles on a plant-specific or vendor-sub range-specific basis (for example, terms of payment or Inco terms that differ from those applicable to the purchasing organization as a whole).
It is not possible to create all purchasing data in the vendor master record as different data. Certain data, such as the Subsequent Settlement indicator, can only be maintained at the purchasing organization level. However, there is certain important data that can only be created at plant level
The data retention levels that are provided below the purchasing organization are defined in Customizing for the account group. The relevant setting is merely a default value. If no organizational levels below the purchasing organization are provided as data retention levels for purchasing, you can nevertheless create different data for other plants or vendor subranges in the vendor master record via Extrasu2192Add. Purchasing Data.
regards,

Matrial Lock for User - Plant Specific

Hi all
Can any one tell me that how to block the user plant specific
My currect setting in Avalibity check block the user globly
Means if any material block by one plant it
shows error to all the plants
can it block plant specific
Thanks in Advancd

I doubt user can be blocked plant Specific. Check with basis consultant, if it is possible through Roles and Authorization.
Regards,
Rajesh Banka

Is there a way to save a specific set of open files?

Hi,
I'm trying to figure out if it's possible to save a specific set of open files in Flash so that when you close the app and then reopen it, you would either see the files that were open when you closed Flash or at least have the option to select it and it woud then open those files in the order that you left them.
Is that an option by any chance?
With all my class files open at one time, I hate having to reload them into the order that makes sense to me every time I launch Flash.
I was looking into the Projects panel which seems like it's in the direction of what I would like but I can't seem to find anwhere that saves open files.
Thanks in advance for any insight into this!
Cole

I don't believe this is possible with Flash - I've used Flash for a long time, and certain learn new things all the time! But Flash only has a "memory" of recently open files, and doesn't automatically open them for you.
But, for class files, you're in luck. There's a 3rd party AS editor, FlashDevelop, that does EXACTLY that. When you launch it, it auto opens the multiple AS files you ahd open from the previous day/session. FlashDevelop is a wonderful tool to use for editing your AS (and is quicker than Flash, and does custom class introspection, where it auto-completes your own class properties & methods, as well as many other developer-friendly features).
http://www.flashdevelop.org
Here is a screen grab of what Flash Develop lloks liek for me when I open it (showing multiple class files opened yesterday, without me having to open them today)

A specific set of websites will not load.

Operating a Time Capsule behind a cable modem, I now find a very specific set of websites (those that I manage) will not load. We had a power outage yesterday which did something to my home network I think.
I have rebooted modem and Time Capsule a number of times. I have tried access from 2 mac mini's, one iPad and one iPhone.
IF I direct connect a mac mini to the modem with a cable, I can access the sites. If I leave the house and work on another wireless network, I can access the sites. I checked the sites from that network -- they are NOT blocking any IP's.
If I try to access the sites through the Time Capsule, I cannot.
I think I just (inadvertently) did a full reset of the Time Capsule -- I had to re-define my network. (Although it seemed to remember some things ... )
SO, I have concluded there is something with the Time Capsule and likely DNS that is preventing my access. I tried simply changing DNS to public DNS servers (like Google) but that did nothing.
Best thoughts on how to overcome this?

Your best bet may be to purposely reset your TC to factory defaults and then set it up again.
One thing to try from within your home LAN to see if DNS or connectivity is a problem is to simply open a terminal and "ping" the IP address of your webserver. If you can ping the webserver by IP then you are able to reach it on the Internet. Then try to ping the webserver by fully qualified server and domain name (i.e. www.example.com). If ping resolves the name to the IP of your web server then you are fine with DNS as well. If either of those basic tests fail to resolve the server and receive a reply, then you indeed have some other issue with your TC or internal network.

Financial Analytics - limiting load to specific set of books

Hi all,
we are running POC for Financial Analytics BI Apps 7.9.6 and we are limiting load into OBAW tables to specific set of books from source EBS (using SET_OF_BOOKS_ID_LIST and $$FILTER_BY_SET_OF_BOOKS_ID DAC parameters) - I was a litlle bit digging in Informatica mappings definition and suprisingly found, that those parameters are just used for load of some fact tables (e.g. W_GL_BALANCE_F etc... ), but is not used to load corresponding dimension tables - like W_LEDGER_D or W_GL_ACCOUNT_D or W_GL_GROUP_ACCOUNT_D - which I would expect to be filtered by specified set of books as well - does anybody know, what tables are filtered by those parameters and what is the reason for not restricting all corresponding tables ?
Thanks very much for your responses
Michal Zima

Hi Michal,
I think you're saying that you noticed that the mappings/mapplets that load some of the tables (W_GL_ACCOUNT_D or W_GL_BALANCE_F, etc) are not using any logic to filter by your "set of books id list."
Have you checked the mappings that load the staging and temp tables?
For example: W_GL_BALANCE_F_TMP, W_GL_BALANCE_FS
The reason you're not seeing the "set of books id list" might be that the logic was applied to one of the staging or temp tables (a source for the _f table). Thus it would be redundant to re-apply this logic.
For example:
Notice that SIL_GLBalanceFact uses W_GL_BALANCE_FS as a source table (and loads the W_GL_BALANCE_F table).
But, SDE_ORA_GLBalanceFact is the mapping that loads the W_GL_BALANCE_FS table. The logic for "set of books id list" is included in this mapping (or actually, mapplet).
Hope this helps!
Thanks,
Austin
Edited by: Austin W on Nov 3, 2009 6:58 AM

How to restrict change to plant specific data in MM01 and MM02 transaction.

Hi Experts,
The requirements is to restrict the plant specific data change in one system. As of now we have 2 different system lets say sys-1 and sys-2. our requirement is if at all any of the users are trying to change/create the material in Sys-1 they should be only able to update basic information and parts regional information/global informations only in sys-1.
Do we have any option in customizing?
If not then what would be the way to achieve this?
Please help.
Thanks!!!!
Rajesh.

Hi,
Please refer the below link it may help you..............
Authorization object for label Data view in mm02

Creation of Plant Specific Views while creating or changing the Material

Hi,
When saving a material (MM01/MM02), based on data in custom table, I have to extend the material for different plants and plant specific views such as
1.     Purchasing
2.     Foreign Trade Import
3.     MRP1
4.     MRP2
5.     MRP3
6.     Forecasting
7.     Parts F&P Data (custom view)
8.     Accounting 1
How can I achieve this? Is there any FM or BAPI that can be used to extend material for a plant and its specific views?
Also please suggest me the user exit or BADI which has to be used to achieve this functionality?
Best Regards,
Kumar

We can use the BAPI, BAPI_MATERIAL_SAVEDATA to extend material to different views.

I have a MacBook Air w/ 64 GB. I have hours and hours of music/vids/etc. Is it possible to have an external drive specifically set-up for my iTunes? If so, what do I need to do? Thanks!

I have a MacBook Air w/ 64 GB. I have hours and hours of music/vids/etc. Is it possible to have an external drive specifically set-up for my iTunes? If so, what do I need to do? Thanks!

Yes, many people do just that. Copy your iTunes folder to the external drive. Once done, open iTunes with Option held down and select the new location of the library file.

How do I export a specific set of rows from Numbers?

What i am looking to be able to do is
Export a specific set of rows from Numbers
I am working with large files of information
but would like to break the file up into smaller files
for example
I have 1 file with 40,000 rows
I need to be able to export/save this file into 4 smaller files
Rows 1-10,000
Rows 10,001-20,000
Rows 20,001-30,000
Rows 30,001-40,000

I do not think I would use Numbers for this task.
I would duplicate the file (let's say the name is data.txt)
and name the two files:
dataA.txt
dataC.txt
then I would open dataA.txt in TextEdit and delete the last half of the file and save
then I would open dataC.txt in TextEdit and delete the first half of the file and save
then duplicate dataA.txt and name the new file dataB.txt
then duplicate dataC.txt and name the new file dataD.txt
Now open dataA.txt and delete the last half of the file, save
Now open dataB.txt and delete the first half of the file, save
Now open dataC.txt and delete the last half of the file, save
Now open dataD.txt and delete the first half of the file, save
if you did this very often I would suggest a script of some kind

Default value in MIGO transaction for PLANT specific

Hi Experts,
I am looking for default vaule in MIGO transaction.
Whenever goods receipt is entered for one particular PLANT ,i want vaule to be dafaulted in Quantity tab No.of container unit value to be PC for english and ST for german.
Is is possible to achiece by creating new role ? if then how ?
Note : It is for PLANT specific and for only one user.
Thanks

>
Dhina wrote:
> Is is possible to achiece by creating new role ? if then how ?
This is not possible using security. You will be able to do it via some form of customisation but you need to judge whether is it worth it.

Shall v maintain price control for material type with plant specific ?

Hai Guru,
In OMS2, we change HALB price control [valuation] as V or S. whether shall v maintain this for plant specific.?
Kindly guide
With Regards
Swetha

Hi
if you do not make the indicator Price control manadatory active then you can have different price indicator for each plant. However thsi indicator is never done plant specific. If you wish to have plant specific then you may have to have a new material type and again you need to control the MM01 creation for that particular plant by means of Authorisation control which is littel involved also but can be done.
Regards

Maintain plant specific safety stock

How to maintain plant specific safety stock for the same material.

Hi swetha
First Go to T : code : MM02 : change Material
Enter plant number for which u want to enter Safety stock
Goto MRP-2
Net Requirement calculation
enter safety stock
Use of safety stock :
Safety stock
Specifies the quantity whose purpose is to satisfy unexpectedly high demand in the coverage period.
The risk of shortfalls is reduced by having a safety stock.
Procedure:
With manual reorder point planning, you can enter a value in the material master record. However, it is merely for information.
With automatic reorder point planning and forecast-based planning, the system determines and adjusts the value automatically for forecasting purposes.
Hope ths solve ur problem
please reward points
Regards
Sunil

Plant specific purchase organization - Reg.

Hi Gurus,
I have one qurrey.
That is "Our client has two company codes 1000 & 2000. In company code 2000, there are 4 plant codes, which is including Head office as one plant.
We created one purchasing organizaton related to company code 2000 as a central level pur. org.
Is it better to create one more purchase organization of each plant specific for carryout purchase activities at plant level.
or can we go for one common purchase groups for all site level procurement.
kindly suggest at the earliest.
Regards,
VB Rao

Hi,
It all depends on how your business wants it. If they are going to do purchase from all the sites & if they have site specific vendors or if they want different reports of Purchases based on site etc.. then its all advisable to go for plant-specific since it gives a one to one mapping.
where as if your business doesn't do purchases from all the sites or site specific vendors then you can advise to go for Central Purchase.
If you are going for plant specific P.Org then you need to create 4 P.Orgs since you have 4 plants or else 3 if your Head office doesn't procure anything.
Just explain benefits of both the scenarios to business so that they will be clear & can take a decision.
Thanks & Regards,

Plant Specific Setting in QM

Similar Messages

Maybe you are looking for