PLANT-STORAGE LOCATION Relation
Hello To everybody,
I just configured all the MM module but while creation a PO im seeing a message that says that the PLANT-STORAGE LOCATION relation doesn´t exist or the Storage Location is Bloqued.
I just review OX09 and everything is ok, anyone has seen these before ?
Hi,
First of all check all your assignments.
ie., Whether Storage Location is Created w.r.t to Plant,
Wherher Plant is assigned to Company code or not.
Secondly,
Whenever you create a Material, you have to check your periods(For the Accounting Purpose).
so go to OMSY -> Transaction code, and check the period settings.
if not Maintain them in OBY6 -> Company code global Data.
Thanks
Similar Messages
-
Report on QI, Blocked, Returned Stocks at Plant & Storage location level
Hi,
Would like to know any reports which gives QI, Blocked, Returned stocks at Plant & Storage location level.
Regards,
Vengathi,
What do you exactly mean say by "Returned stock"..
Also go through by MMBE tcode ...
Regards
Priyanka.P -
Material block for sale in plant-storage location level
Dear experts,
Please help me how to block a material to sale in plant-storage location level.
Thank you.
Regards,
BadruddozaThe standard sales block (MVKE-VMSTA) in material master is valid for sales organisation / distribution channel combination (VKORG, VTWEG) - this means you cannot do it for Plant / SLoc combination,
What does it mean to block it at plant / sloc level? Generally in SO you do not specify the storage location. Or you are speaking about MRP also? In this case you could use SLoc-MRP (with proper availability check in delivery) for your material but the problem is that a plant might be assigned to several sales area and this SLoc would be hidden for them also.
Could you please specify what would you like to achieve, what sales block means according to you?
Regards,
Csaba -
Finding Plants\Storage locations associated with the Routes
Hi,
I need to find all possible Plants/Storage Locations associated with the Route in hand.(These routes can be found in TVRAB table).Is there any mapping done in SAP between Routes and Plants or Routes and Departure Points ?
If anyone has any inputs regarding this, it will be really helpful.Hi,
To determine the route we need to know the Plant and the Shipping point or connection point/port.
I think we can find the routes in table TVRO or VBLK.
and for route descirption we go for the TVROT
First check the tables for the Plant and shipping point then we can link to the route.
Pls check this link
http://help.sap.com/saphelp_47x200/helpdata/en/dd/560dee545a11d1a7020000e829fd11/frameset.htm
http://help.sap.com/erp2005_ehp_03/helpdata/EN/17/c0b758903111d2b42f006094b9b9a0/content.htm
Regards
Lekha -
VA01 SALES ORDER WITH PLANT &STORAGE LOCATION....??
Hi Experts,
when i create a sales order....
Depends on sales order ( order Type) in the sales order system has to trigger some perticular PLANT and STORAGE LOCATION in the itemlevel
and also it should be abule to change if we wants .
for this is there any customising ,or bapi, or userexit ???
Thanks in advance,
Anthyodaya.Hi yadav. thanks for the reply ..
but i did t find that USER EXIT whis is u sent m..
i have a following list of user exit only .. is there any another way to search that...use exit
Exit Name Description
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
Thanks,
Anthyodaya -
Stock transfer between Plant/Storage location to Plant/Storage location
Dear Experts,
This is a MM component of SAP Retail.
We have 4 brands ( Plants of type B, Plants of type C etc) that needs inventory from the same Distribution center (Plant A) for some common products. Here the direction is to prioritize the inventory per brand. The requirement is one brand should not take the inventory of the other brand.
To overcome this problem , the solution proposed is to have different storage location for different brands in the same DC.
When we run replenishment planning for the brands and do a ATP check, the availability check should consider only the one issuing storage location in the DC which we allocated for the brand.
I do see the following set up in SPRO and I have done the following.
Step1: Activate Stock Transfer between Storage Locations SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations-> u2018Activate Stock transfer between storage locationsu2019
Step2: Assign Delivery Type and checking rule according to storage
SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations->Assign Delivery Type and Checking Rule According to Storage
Step3: Define Shipping Data for Stock Transfer between Storage Locations
SPRO ->Material Management ->Purchasing ->Purchase Order ->set up stock transport order ->set up stock transport order between storage locations -> Define Shipping Data for Stock Transfers between Storage Locations
Step4: Define Rule for Determination off Shipping Point SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations -> Set-up Storage-Location u2013dependent shipping point determination->Define rule for determination of shipping point
Step5: Shipping Point Assignment According to Storage Location
SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations-> Set-up Storage-Location u2013dependent shipping point determination-> Assign Shipping Points According to Storage Location
Question.No:1- After completing the above set up in me21n, the issuing storage location field is greyed out. I am not able to enter any value here. Can you please help.
Question.No:2
I do see the following setting.
Under IMG ---> Material Management ---> Purchasing --> Purchase Order --> Set up Stock Transport Order -->Business Add-In for Determination of Issuing Storage Location
Display the IMPLEMENTATION
Double click on the method GET_SUPPLYING_SL
Click the Execute button
Click the detail button on IF_EX_MD_EXT_SUP
Execute GET_SUPPLYING_SL
There is a prerequisite for this BADI .I have done those things.What i dont understand is where to force the combination of supplying site/issuing stor.loc/receiving site/receiving stor.loc
Kindly provide your inputs.
Thanks,
VasanthanDear,
Have You configure MRP in second plant (where you want to transport the Material).
Please try with this and do again Po for stock transport.
Regards
Piyush Patel -
MRP for plant/storage location
Dear all,
I have a question regarding MRP extension for plants and materials.
There is one plant (8000). Company has recently got two locations u201Cxu201D and u201Cyu201D in different states. MRP has to be run for u201Dxu201D for sales orders and PRu2019s generated should be directed to the main plant 8000 which then triggers a TO for u201Cxu201D.
My question is since u201Cxu201D and u201Cyu201D are not yet maintained in SAP, Please advise whether to maintain them as plants or as storage locations and also the main steps to be followed for this process. Also, Please advise is there any config to be done so that PRu2019s are directed to plant 8000 and automatic TO/STO are triggered to u201Cxu201D
SurajHi
you have to create both X&Y as plants.
Then the procedure to be followed in multi plant planning.
The following link can be followed.
http://help.sap.com/saphelp_erp60/helpdata/en/f4/7d3f9344af11d182b40000e829fbfe/frameset.htm
Regards
YMREDDY -
when we are having 3 storage locations in 1 plant, In sales order level it shows the 3 storage locations, can we take only one in consideration and others must be in Grey out, or not displayed.
HI
Please have a look at this description and help me to figure it out.
Question : I am using a user exit in transaction vl01n ( Create outbound delivery ) for filling default storage location.
I am not able to find the exact user exit , where to implement the code . Main thing is we have fill the plant i.e WERKS based on the shipping point in VL01n automatically. i.e when the delivary is executed we will fill the shipping locaiton , then the plant data has to replicate in the delivary order automatically depends on the shipping point.
Regards,
sridhar -
Shipping point 01 loading group plant storage location not defined.
Hi All,
I have a unique problem where iam getting the above error when sales order is created using incomplete log.
I have checked all the settings related to Shipping point
in OVL2 Shipping point are assigned,
in OVL3 picking location is also assigned.
I have been searching entire SDN and help.sap.com for the above error for last three days and post a new thread.
Please help, points rewards.
Regards,
Vinod.Dear Vinod
First of all I am really happy that you have taken the trouble to find out a solution to your problem and since you were not able to get it, you had posted a new thread. Of late, this is very rare people searching the forum b4 posting.
Coming to your problem, go to customer master Sales Area tab and see in Shipping tab, what Shipping Condition is maintained. Ensure that the same is maintained in OVL2.
Similarly, the same for Loading Group. Normally, by oversight, people commit mistakes by maintaining differently which is not assigned in masters and this would have missed your attention. For example, you would have assigned 01 in customer master and in OVL2, you would have maintained 03.
Also, please ensure that in OVXC, you have assigned shipping point to your plant.
thanks
G. Lakshmipathi -
Considering stock in other plants' storage location
Hi all,
E.g. For 1 material I have stock in 2 plants A and B. Major consumption being in plant A (say 80%). So when I execute MD07 for this material with MRP controller for plant A (collective overview), in the 'plant stock' column I would like the stock to be sum of stock in plant A and plant B. Is it possilble ?
Regards,
YogeshHi,
For that you can use MD48, but it is per material. If you want such feature for multiple materials, then you will have to build a custom report (for stocks refer to table MARD). As std SAP ECC does not have this feature.
Hope it clarifies.
Regards,
Vivek -
Re: Hold stock in plant storage location.
Hi guru's,
My end user wants to hold some stock for some time, and after some time he wants to keep as usual in unrestricted stock.what is the procedure for it.
thanks
tuljasingh.initially do the good receipt in the block stock with movement type 103.
then when ur user wants to use it then use 105 movement type/343 movement type
regards,
indranil -
Plant and Storage Location determination at Item level during Copy control
Hello Freinds,
We are experiencing issues within Sales Order creation when the line item is referencing a contract. The plant and storage location is being determined from the contract - this should not be done, we have an enhancement in place for sales order plant/storage location determination which is how these values should be determined.
Kindly suggest, if it can be achieved through configuration setting at Copy control level, to avoid the Plant and Storage location determination from Contract in to Sales Order.
Thanks,
Anup BansalHello
You can mention the additional logic of redetermining Plant and storage location whenever copied from contract.
In a sale order, i think you are maintaining a enhancement in prog MV45AFZB & user exit userexit_source_determination.
YOu can maintain the coding at same place.
thank you
Anirudh -
Material transfers between plants and storage locations report
Hello experts.
I´m looking for some help.
Actually i am looking for a report that show information about material transfers between plants and storage locations. Is there any report that shows the source of the material (plant, storage location) and also shows the target (plant, storage location).
Thanks for your help.Hi,
Though you may not get report for the same , but you can narrow down the check by using the table MSEG or MB51 using the moment types like 311 643 (sd delivery moments )which are for stock transfers .
or if you want storage location stock many reports are available like MMBE, or MB53 etc.
Regards -
FM to check material plant and storage location combination
I need to build a check that material is extended for plant & storage location.Please guide id some standard function module exists.
I do not want to write select query using MARD.Hi ,
try this FM
MARD_SINGLE_READ
Regards,
Rohan. -
Change storage location and plant for Return Delivery (outbound)
Hi,
I'm trying to achieve the following:
Sales orders contained the 'normal' plant. Whenever a return delivery is created it should default the plant to a 'return delivery plant / storage location'. I've looked in to this and it seems we've got multiple options, however i would like to check:
- Implement V02V0002 user-exit and link with 'return' movement type. Will this ensure plant change aswell?
- Use standard RETA rule and define ?situations?. Could somebody clearify whether we can achieve our goal with this: Change plant and storage location?
Any suggestions to achieve the above are very much appreciated.
Note: Material contains both views for 'return plant/storage location' and 'normal plant/storage location'.
System is R/3 4.6c with IS Retail activated.
Kind regards,
TimHi,
The delivery is created against/follow-on a sales order / subscription order / invoice. I don't think we use/have a 'return sales order'. Yes, we only use 1 plant / storage location for the returns of goods.
To sum it up:
- Implement badi/user-exit ensuring that the plant is changed/defaulted in to our 'returns plant' for return documents.
- Configure storage location via 'shipping condition'.
Correct?
Ps. I don't think we'll achieve changing the plant via configuring a shipping condition for our return document type. As the plant from the sales order doesn't match with the shipping condition it won't be taken in to account? And yes: It is mandatory/requirement to change the plant for customer return documents.
Thank you for your inputs.
Kind regards,
Tim
Maybe you are looking for
-
Hi, I have created a web based application which uses FORM based authentcation. The application is developed in NWDS 2.0.16. When I deploy the application and access it in IE there are two parameters JSESSIONID and SAPLB which get appended to existin
-
Error while executing WAD: " Page cannot be displayed"
Hi All, I am facing an error while i am executing the WAD template.As soon i execute the template it gives an error as " Page Cannot Be Displayed". I have just used one table in my template. Is this some setting issue?? Please give your valuable inpu
-
hi all, I have two screen fields to which i have attached search helps dynamically (using function module F4IF_INT_TABLE_VALUE_REQUEST. The scenario is that i want to select the first field and depending on the value entered, i want to restrict the s
-
How to Copy a Custom DBI Report and Modify It
Hi Every one.. If AnyBody worked on Customizing DBI Reports please help me. My Requirement is to add a new Column to an Existing DBI report. It is a Custom one. I have to modify that. If anybody worked on DBI customizations please help me.. Please...
-
HT1391 how do i authorize my computer for my purchases
My computer crashed and I had it rebuilt. I am trying to use my itunes purchases but it is asking me to authorize my computer. How do I do this?