Plant to Plant trasfer in Quality inspection Status

Hi All,
I would like know how can I transfer quality inspection (Q) stock from plant 1 to plant 2 and receive in quality inspection (Q) status as well.  Movement type 301 is only helpful for unrestricted stock.  Is there any way this can be possible? If you can help me with the steps or any documentation will be very much appreciated.
Thank you for your help!

Hi,
You can only transfer the material  from unrestricted stock  to unrestricted stock. If you need to transfer the stock from QI to Qi inspection you can follow this process.
you can use mvt type 321 to transfer the material from quality inspection to unrestricted within plant.
After this is done you can use mvt type 301 to transfer the material from unrestricted stock of plant 1 to unrestricted stock of plant-2.
Now use mvt type 322 to transfer the material from unrestricted to quality inspection stock
Br,
Tushar Patankar

Similar Messages

  • Quality inspection status

    Dear Experts
            I hope you r doing well
    when i  release the production order i couldn't see the quality inspection status ICHA, Even i maintain the inspection charecteristics
    please advise me the cause
    Thanks in advance
    with regards
    s.anbu

    Dear prerequsits are as below
    - Material master with inspection type 03 activated with task list or material specification.
    - Routing/rate routing with atleast one operation with control key with - insp char required check box tick on(check in OP67)
    - Assigned the charectristics to that opration.
    - Create production order and release...system will create inspction lot with REL/ICHA status and insp char assigned status.

  • Quality inspection status in purchase order

    Dear sapients
    we have source inspection active in our system is it possible to bring the status of the inspection in purchase order.
    Regards
    kantha

    Dear Yogini,
    Yes that is ?
    but my clinet requirement is ti bring the status of source inspection in purchase order if at all any non standard method available?
    Regards
    kantha

  • Movement of stocks in quality inspection from warehouse to warehouse

    We are currently implementing SAP with WM and was told that material that is produced on our production lines that is received via GR transaction into Quality Inspection status cannot be moved from one warehouse in WM to another warehouse in WM even if both warehouses are under the same plant.  Is this valid statement and if so is there any recommendations to provide for this as a requirement?

    I believe it's a true statement across Plants, I've never tested within a Plant.  If you have batch management, you could consider using a characteristic to restrict use/control status instead.
    Regards,
    Nick

  • Quality inspection at different location

    Hello Masters,
    I’m new to SAP QM Please help..
    My client wants to do GR for process order at storage location 001 in plant ABCD then do STO (possibly partial qty) to another location 002 in plant ABCD with quality inspection then do dispatch after UD completion.
    Please guide me how to get this requirement done in SAP. If possible
    please help me on step by step process and movement types involved & quality
    inspection types used in this scenario.
    Thanks in advance.
    Arun.

    Hi Arun,
    Activate inspection type 08 in material master in QM view. using 311 movement type you can transfer stock from storage location 001 to 002. during this transfer system automatically create inspection lot and stock will be posted to quality inspection..
    Thanks
    Kumar

  • Cancel the quality inspection movement on good receipt

    I am trying to cancel a quality inspection movement from qual. Inspect. to
    unrestricted use.  Here are the details:
    1. A goods receipt was entered for Material XXX  batch YYY for
    1900kg.  It was entered  Aug 1, but was backdated to post on July
    29.
    2. I think  an accident was made and the person
    entered  the good receipt  into quality inspection status, rather than in unrestricted
    use.
    3. this  person  used   the   movement  321 without success .
    4. Now it will not allow me to post goods issue with a back date of Friday
    July 29.
    When i try to reseverse the good recipt i received an error message Deficit of BA Stck.in qual.insp 1.900 KG
    Message no. M7021.
    Can you help me?
    Thanks in advance

    While doing reversing change stock type .

  • Stock transfer from Plant to Project with Inspection Lot

    Hello,
    Our client procures consumable material in bulk quantity at plant level and then issues it to project as and when required. We want inspection lot to be generated while we are transferring material from Plant to project stock.
    Question -
    1) We are using movement type 412 Q for transferring plant stock to project stock. Is there any other movement available for this requirement?
    2) What configuration is required so that inspection lot will be generated when material is transferred from plant to project stock?
    I have tried following configuration but but inspection lot is not getting generated -
    Quality Management - > Quality Inspection -> Inspection Lot Creation -> Inspection for goods movements - > Deactivate Quality Inspection for a movement type. QM not active tick removed.
    Please help for resolution.
    Regards,
    Milind Dumbre

    Question -
    1) We are using movement type 412 Q for transferring plant stock to project stock.
    Is there any other movement available for this requirement?
    Use movement type 415 for transfer posting from unrestricted stock to project stock

  • Movement of Material in Quality Inspection

    Does anyone know a way to move material from one plant code to another and still keep the material in Quality Inspection, blocked or restriced. We are now having to move the material to Unrestricted in order to move it and the mateial has actually gotten to our customers as a result. We want to keep the material in a status that would not allow orders to cut against it but we can move it to other plant codes.

    thanks to everyone for your responses. However, the MB1B will not work in this case. The seniro is this. I have material at an off-site warehouse with plant code ABCD (warehouse managed). The material is in QI there. I need some of the material at the manufacturing site plant code XYZ1. I want to enter a UB transfer order (STO) and not take the material out of QI at ABCD so that the remaining material left in ABCD will remain in QI. The problem is if we have material that is off grade at ABCD and we want one unit sent to XYZ1 for testing we have to take the whole off graded lot out of QI in order to move the one unit. Since the off grade was put in unrestricted it has on occasion gotten out to a customer.
    Edited by: Renee Flatt on Feb 7, 2008 11:00 PM

  • Exclude Quality Inspection from Batch Determination

    Hi Guys
    I have am stuck with  a very strange scenario and need your help to sort this out please
    In the process orders I have set auto-batch determination on release and in the checking rule I have excluded the quality inspection lot.
    Now when I am release the process order on batch determination it picks up the quality inspection batch!
    Can you please let me know where and how this can be resolved
    Thanks in advance
    Rahul

    "Also when I do the material availability check the QI stock is not considered."
    Presumably, this availability check is run when order is status CRTD. Please check if the same checking rule has been applied to "Creation" & "Release" in OPJK. If not, check the differences between these checking rules in OVZ9.
    "However I am not sure if the checking rule decides the batch determination, please correct me if I am wrong. And let me know where do we maintain the relationship between the cheking rule and batch determination procedure!"
    Yes, they are related. Batches go through 3 stages to be determined.
    Stage 1: Check against Stock
    Stage 2: Check against Classification
    Stage 3: Availability Check.
    It may be possible that stage 3 is not a dynamic availability check, in which case the checking rule is irrelevant. However, if it is a dynamic availability check, the checking rule is relevant.
    The quickest way to determine if a dynamic ATP check is executed is to set a breakpoint at Function Module AVAILABILITY_CHECK_CONTROLLER in se37. This breakpoint should be reached when you release the order. The first line of code in the function module is:
    CHECK NOT P_ATPCSX[] IS INITIAL.
    Double click on P_ATPCSX[] to see if it contains entries. If this table contains entries, a dynamic ATP check is executed.
    Also, When you enter CO09 for the material, plant and checking rule, is the QI stock displayed?

  • Problem in BAPI for stock posting from quality inspection  to unrestricted usage

    Hi all,
    I am using BAPI_GOODSMVT_CREATE for  stock posting from quality inspection  to unrestricted usage Stock against quality inspection lot(not by MB1B) using mvt type 321.The material doc gets created by the BAPI,but actual stock posting is not taking place ie.the stock doesn’t get reflected in QA33/32 and QA11 also .Can any one suggest what must be wrong?The inputs given are as follows:
    GOODSMVT_HEADER:
    PSTNG_DATE =30/07/2014, DOC_DATE = 30/07/2014, REF_DOC_NO = INSP LOT NO.
    GOODSMVT_CODE:
    GM_CODE:  ‘04’ .
    GOODSMVT_ITEM:
    MATERIAL = MATERIAL NO
    PLANT = PLANTCODE
    STGE_LOC = ‘WIP’
    BATCH = BATCHNO
    MOVE_TYPE   = ‘321’
    ENTRY_QNT = 100
    ENTRY_UOM =  ‘EA’
    ORDERID =  Prd ord no.
    After executing this I used BAPI_TRANSACTION_COMMIT also. I am able to see the posted qty in MMBE,but it is not reflecting in QA11/33/32.
    Kindly help me.

    Hi Naveen,
    Thanks for the reply. Even after using FM QAVE_PROCESS_AUTO_UD,when i execute
    BAPI_GOODSMVT_CREATE, the same thing is happening.I am unable to see the stock deducted in QA33.
    Is there any input in the goods mvt bapi where we can provide inspection lot no since i believe that the goods mvt has to get connected with the inspection lot.

  • Allow Negative Stock in Quality Inspection

    Hi All,
    I have a general question regarding Negative Stock.
    Is it possible by any means to allow -ve stock in Quality Inspection. If yes then what are the customizing settings that are needed.
    Any valuable inputs will be really appreciated!!
    Thanks In Advance!!
    S

    hi
    firstly how can we have negative stock in Quallity
    stock updates in quality from PURCHASE or PROduction so we cant have -ve stock in quality
    negative stock will be there only up on consumtion
    now u can have negative stock in GOODS ISSUE ,as on emergency if u dont have mateial and u have to issue some material to production then u have to have -stock open
    now for this go to material master plant data 2 view and here u can ticl for allow negative stock
    regards
    kunal

  • How to scrap specail stock in quality inspection...

    hi guys:
    I have a query, Is there any possible way to scrap the sale order stock in quality inspection without transferring it to the unrestricted stock and that also through inventory count(mi01,04,07),
    Actually we have damage lighting stock which is received against sale order(automatically transferred to quality inspection), and customers are replaced with new units, then this stock is called back in head office, for this we have a complicated process in use, first this stock is scraped from suppose "a" storage location after transferring it to unrestricted, then loaded back to "a", to make an STR for it from Head Office.
    So is there any way to scrap all special stock(complete storage location) against different sale orders at one go. whether the stock is available in unrestricted, quality inspection or blocked stock.
    I hope I am understood.
    Please help me to get through this complicated process.
    Regards
    Salar...

    Thx you guys are fantastic; I appreciate your help;
    below given is the post which has helped me, but there is some problem at the end, after the click of this point "11. (Click) in the gray box next to the session name and click . " there was nothing to proceed with, though I have posted the count through mi24 and post the difference with mi07, but still want to know what goes wrong with mi31, I have given the appropriate time for back ground processing....one thing to note there were 2 old inventory documents seen to be pending of the same storage location I was posting the count off, is this the reason of problem in processing of mi31,,,,,,please guide...
    Hi Buddy This transaction is used to create physical inventory documents for multiple materials in your plant and storage locations. Inventory documents may be created and printed prior to the count date; however, the posting block should not be set until the day of the actual physical inventory count. 1. From the SAP R/3 System screen, enter transaction code MI31. 2. Click or press Enter. The Selected Data for Phys. Inventory Docmts w/o Special Stock screen displays. 3. Enter or select a value for each of the following required fields: - Plant (enter plant code) - Storage location (do one storage location at a time) - Name of session Remove the checkmark from the Materials marked for deletion field will exclude items previously marked for deletion from the inventory document. The default session name is MB_MI01. Enter your initials and the session number after the default session name to identify it as your own. Example: MB_MI01_WW1 - Max. no. items/doc - use 99 for main storage location; - use 300 for truck storage locations. - Planned count date - enter date of inventory count - Physical inventory number - enter fiscal year followed by plant number and storage location. Example: 2004FY60118071. MI31 Create Physical Inventory Documents (in batch) - Set posting block - check if count is immediate; do not check if creating batch documents ahead of the inventory count date. - Sorting u2013 click on and select Plnt- Stor.bin description-Material. 4. Erase any variants under u201CDisplay optionsu201D. 5. Click . The Batch Input Created for the Creation of Phys. Inv. Docmts screen displays. Enter through any system information messages or errors. 6. Click . The Batch Input: Session Overview screen displays. 7. Click in the gray box next to the session name to highlight row. Click . The Process Session {Session name} dialog box displays. 8. Select the Background radio button. 9. Click . The following message displays: u201CX session(s) transferred to background processingu201D. It takes approximately 5 to 6 minutes for the system to process a batch session. Please wait at least 5 minutes before continuing with Step 10. 10. Click in the gray box next to the session name and click . The Batch Input: Log Overview screen displays. 11. Click in the gray box next to the session name and click . The Batch Input Log for Session {Session name} screen displays. If the batch processing is completed the last line in the Message column should read u201CBatch input processing endedu201D. If this message does not appear on the last line adequate time was not provided for the batch process to be viewed. SAP continues the batch processing in the background. Use transaction MI24 to retrieve a complete list of Physical Inventory Documents created. 11. Record the physical inventory document numbers created. You will need the document numbers to print the inventory documents. Clicking on can print this list. 12. View the log for any errors generated. A material master record being blocked for updates at the time of processing may cause errors. Add the material to a physical inventory document using transaction code MI02. Regrds Yogesh
    Thanks & Regards
    Salar...

  • Inspection setup maintained while stock in quality inspection

    Dear Consultants,
    While having stock in quality inspection we were still able to maintain the inspection setup in QM view of that material in that plant.
    Actually the system should have thrown error "To activate QM, the inspection stock for the material must be empty". But some how this is not happening.
    Kindly provide solution.
    Regards,
    Ninad.

    Hello Ninad,
    You can activate an
    inspection type under the following conditions:
    If it is not stock-relevant
    If it is stock-relevant and at least one active stock-relevant inspection type exists
    If it is the first stock-relevant inspection type and no inspection stock exists, or if you set the indicator Activate despite insp. stock
    above lines are copied from
    https://help.sap.com/saphelp_46c/helpdata/en/2d/350ef6448c11d189420000e829fbbd/content.htm
    Your scenario falls in 2nd condition. You can activate inspection type if it is stock-relevant and at least one active stock-relevant inspection type exists.
    Amol.

  • Stock in quality inspection

    Hi Gurus,
    I am getting an issue in Quality inspection stock.The issue is like this .
    In the last month one inspection lot generated and  without stock posting only UD done.
    The lot quantity was 33.670 , but when I am checking the quality inspection stock in plant stock of the material for
    last period in material master I am getting only 12.360. Difference is coming 21.310. So I am worry about this quantity.
    Please advice .I have attached the screen also
    Regards
    Aravind

    Hi,
    This may not be the exact inspection lot which you have seen for quantity 33.670.  System behaviour as follows:-
    If any inspection lot which is not cleared in previous month say Lot qty is 50 PC in June 2014 and you cleared the inspection lot on current month, then this 50 PC will be there in previous month (June 2014) quality inspection stock.  This is just for information purpose.
    The same way, 12.360 TO is someother inspection lot qty which was created on last month and cleared on this month for the same material and this quantity has been added to current month unrestricted use stock also.
    Check in system that is there any Inspection lot which was cleared on this month with qty 12.360 TO.
    Regards,
    Arvind S

  • Purchase order GR need to post to Quality inspection stock

    Hi all,
    How to post stock to Quality inspection directly for a PO. Even though in GR i make sure that its posting in Quality inspection, by default it is going to Urestricted stock. How to fix this by posting stock to Quality inspection directly?
    Thanks,
    Avani.

    Hi Avani,
    Pre-requesite:-
    QM should be live at plant level.
    Data toeb maintained in QM view.
    You need to activate inspection type 01 (For GR against Purchase Order) and 04 (For GR from Production, against Process Order) in QM view of Material Master. Doing this all the GR quantity will be posted in Quality stock automatically.
    If QM is not live, you need to activate the "Post to insp. Stock" inidicator in Materail master QM view.
    Update us to help you more, reward points to help you better!!!
    Regards,
    Shyamal

Maybe you are looking for