Plant wise inventory in trial balance / balance sheet

hi gurus,
our client has got 5 plants and wants plant wise inventory in the balance sheet. how can this be achieved.

hi,
i am not talking about the reports, but the data in the balance sheet. when we run the balance sheet, we will get data about each and every thing like (consumption / inventory etc.,).
now our client is getting the inventory of finished goods at the company level (ie no plant wise split up). they want to have plant wise split up (ie. balance sheet should come like inventory of finished goods in plant 1100, inventory of finished goods at plant 1900 etc.,).
hope this explains my requirement better

Similar Messages

  • Default profit centers Plant wise for Balance Sheet tax relevant Items.

    Dear All,
    We have an issue in profit center acccounting.
    In balance sheet accounts, Vat input tax payable, TDS payable, Cenvat clearing etc are picking profit center from 3KEH. When Exicse is getting captured cenvat clearing account having the profit center but while doing the MIRO cenvat clearing do not have profit center & plant.
    Why it is so?
    Basically we are doing the following steps.
    1. Purchase order creation ME21N.
    2.Goods received via migo
    3. invoice receipt via miro.
    At the time of miro posting, system creates automatically accounting document, with default profit center maintained in 3KEH, which are assigned to Vat input tax payable, TDS payable, other tax accounts. For GR/IR clearing account right profit center is picking without any mistake, while doing MIGO & MIRO.
    We need to extract the Balance Sheet profit center wise at plant level.
    Derivation rule is created for this balance sheet account along with Valuation area condition to post to correct profit center maintained under Tcode: 3KEI . But system is taking only default profit center (3KEH).
    I have checked configuration and the following areas like Material master costing view, tax code areas, and account group but did not find any mistake.
    Please advice and Guide us, how to get correct profit center at plant level for these balance sheet accounts instead of default. (I want to make default profit centers plant wise).
    It is urgent.
    Thanks,
    Shailendra Gupta.

    Hi!
    You can use following report :
    S_ALR_87013336 (Report for Balance sheet at Profit Center and Group Level).
    Hope this will help.
    Thanks & Regards,
    Taral Patel

  • Profit & loss & balance sheet plant wise

    hi , expert
    how can i see p&l & bs plant wise
    regards
    gk
    Moderator: Thread locked due to crossposting into ERP Financials.

    Hi,
    Plant wise balance sheet can not be taken, provided if you would have assigned one plant to one business area. that too you can see only on business area level or profit centre level.

  • Plant wise trial balance

    Hi,
    My Client is asking the plant wise balance sheet.
    We have only company code and we are not using business area concept and we are working on ECC 6.0.
    If we implemented business area concept, is it possbile to get the plant wise trail balance.
    Please guide me
    Aparna

    Hi,
    Are you mapped your plant to single profit center?if so,you will create report painter report for trail balance.
    if you created your plant as a segment and assinged segment to all your profit centers.then you can create customer trail balance report per segment.
    hope this helps you.
    Thanks,
    Rau

  • Profit Center wise Trial Balance & Balance sheet Report

    Hi Friends,
    While executing standard Report S_ALR_87013336 i m getting zero balance i. e. the GLs not getting populate.
    Plz let me know if there is any standatd T-Code through which I can get Profit Centre wise detailed Trial Balance showing opening balance, transaction during the period & closing balance.
    Plz give some other standard T-Codes which can solve the purpose for getting Trial Balance & Balance Sheet.
    Note:- we r using ECC6.

    Hi,
       I assume that you are in 6.0 version. It will not update GLTO tables , instead updates FAGLFLEXT tables. You need to select the "Write to classic general ledger " option to get the detail report. This option is available in general ledger >periodic processing>.
    Assign points as way of thanks.
    Thanks
    Dasa

  • Plant wise Balance Sheet and Profit and Loss report generation

    Hi,
    Can any one please give me the configuration steps for generating plant wise P&L stat and B/S.
    The client has a single  company code with 5 plants and wants to generate the statements  plant wise.
    Thank u,
    Regards,
    SP.

    Hi,
    I SAP we can draw the B/S and P&L on company code and Business area. and from ECC6.0 on profit center.
    We can not draw B/S and P&L on Plant. So is your r  on Ecc 6.0 and above define profit center for each plant and then u can draw B/S and P&L on plant.
    And if below Ecc 5.0 define business for each plant and u can have B/S and P&L .
    Hope this is clear , assign the points.
    With regards
    Krishna Singareddy

  • How to display Plant wise Trail Balance

    Dear SAP Experts,
    Can you let me have the T-code to review Plant wise Trail Balance?
    Best Regards...

    Hi,
    Thanks for your support experts. Business area is a good option because it will display both B/S and PnL items. Profit Center will only show PnL Items.
    We have not implemented business areas although the company is still running. Once it is configured, I will make it as a required entry so that all accounting documents will require this field to complete the process. Then it will show the complete balances of the business areas in the Trial Balance. Any data entered before this configuration will not be useful isn't it?
    Please correct me if I am wrong.
    One more thing, should I configure it after the year end (V6) or from now on?
    Thank you once again for your support experts...

  • How to get plant wise Vendor Balance

    Dear All ,
    Kindly tel me How to Get Vendor Balance at Plant level.
    Regards
    Girish

    Hi Girish,
    we can give the customer balance through Plant wise in standard SAP
    But vendor balance not possible in plant wise.
    For that you can do customise userexit
    Regards
    Surya

  • Plant wise GR/IR Balance

    Hi
    This is lingaraj ,I have taken the T-code MB5S for displaying GR/IR balance.But in that t-code no option for plant selection.
    and also we dont have two purchase organisation for both plant.
    we have only one Purchase organisation for both the plant.
    So please any one give me any T-code for displaying the GR/IR balance by plant wise

    Hi,
    MB5S report mainly gives the result with respect to either Vendor, Pur org, pur Group, Material or Purchasing document.
    Your requirement is related to Plant wise.
    then you can select the Purchasing group which is used only for that plants, otherwise take a list of PO created for Plant and input that in MB5S.
    You can check in FBL3N  also
    It is better you can approach the FI consultant on thie.
    rgds
    gsc

  • Plant wise asset class wise balances

    Hi
    I am looking for a report which gives me asset balances plant wise , asset class wise. I tried through the variuos reports under Asset Balances but am not getting both parameters in one report.
    Can somebody explain how to get this. I need report in following manner
    Plant 1
      Asset Class 1
      Asset Class 2
    Plant 2
      Asset Class 1
      Asset Class 2
    Thanks

    Hi
    I had a similar requirement and we addressed it with a work around..
    The nomenclature of the Cost Centers was designed in such a way that 1st four chars represented the Plant Code... This way, when we sorted our report output on the cost centers, you also get the same Plant Wise
    If not this, you can modify the reports AR01 or S_ALR_87011990 to include PLANT in them.. Refer this wiki thread which explains how to include own fields in standard reports... http://wiki.sdn.sap.com/wiki/display/ERPFI/Asset+Reporting
    br, Ajay M

  • Plant wise trail balance

    Friends,
    My client want to see the Plant Wise balancesheet.
    Please suggest me how should i configure for this.
    they want to see plant wise balancesheet like how we get in f.01.
    I will assign full points to all of you.
    Thank you.
    Regards,
    Reva Naik

    hiii
    In most of the cases SAP facilitates reporting as Business area wise , we have to define Business areas for plant wise , then u will get reports according to Business areas .
    In most of the cases Bus. Area = Plant = Profit Segment
    Hope ur problem will b solved
    can u tell me the confg of TB in Financial Statement Vetrsion ( OB58 ) , i tried the confg of TB but system is calculating Profit defaultly , i didn't assign any GL Acct also... is there any provision to configure TB as per Client's grouping....
    help me
    regards
    ramki

  • How to get Inventory -Finished Goods Values Plant wise

    Hi,
    Client is asking a Balance sheet. In that Balance Sheet, he wants plant wise break up for Inventory Finished Goods GL Account.
    For Example:
    Inventory finished goods  - Plant 1100 = 120000
    Inventory finished goods  - Plant 1900 = 110000
    How can we get plant wise break up in Balance sheet? How can it be possible in SAP? Please help me on this.
    Thanks
    Vimal

    Hi Vimal,
    Use Transaction Code: FBL3N for obtaining the values of Inventory - Finished Goods Plant wise.
    Give the following Inputs:
    GL Account : Inventory - Finished Goods
    Company Code - 1000 example
    Click on Dynamic Selection Tab (Shift+F4) >> Click on Document (Spinner) >> Double Click on Plant >> You can see the input field at right side of the input fields. There give the plant number for which you are going to draw the report and Click on Dynamic Selection Tab to hide.
    Now, select Line Item Select appropriatedly.
    Execute.
    This is working fine and your problem will get solved and make your client happy.
    Regards
    VG

  • Financial statement vesion -Plant wise.

    Hi SAP Gurus,
    I need plant wise balance sheet as per my client requirement. I am usign the business area concept to extract the planet wise financial statement. Can any one throw some lights on Financial statement version. What is the significance of having different financial statement version. If all the plants are having same policies and groupings then can we do it throw same FSV?? i need the benefits of having different FSV so that i will get idea to what should i go for it.
    Regards,
    Deva.

    Hello,
    Financial ststements can be fetched on business area, profit center or segment level. what you are trying is correct.
    Populating business area in tax line items can solve your problem as you have said that you are taking business area wise statements for plant.
    Go to
    IMG -->Financial Accounting(New) -->General Ledger Accounting(New) -->Business Transactions -->Document Splitting -->Edit Constants for Nonassigned Processes.
    In Assignment of Values, assign Def. Business Area.
    Remember to make business area optional for that GL's.
    Regards
    Tushar
    =============================================================

  • PLANT WISE FINANCIAL STATEMENT REQUIRED

    Hi
    Can any one tell me whether any standard report is available in SAP to get the plant wise Financial Statement ( No Business area wise ) as it is having in FBL3N ( thro dyanamic selection ) for GL balances.
    Please reply immediately if possible.
    Thanks and regards
    G. Jana

    As standard you cant get this.
    A Plant would need to be linked to a Profit Center.
    Do you use ERP 6.0
    Perhaps you could add it as a field for document splitting. However you would then have to maintain you business splitting rules as well.
    What is a plant used where you are.

  • T code for sales ageing report plant wise

    Is there any standard report to sales ageing report plant wise & material wise. Pls guide me with the

    Hi Amit,
    based on your configuration, the following standard reports can be usefull
    S_ALR_87012168- Due date analysis for open items
    S_ALR_87012178-Customer open items analysis by balance of overdue items
    S_ALR_87012174- List of customer open items
    S_ALR_87012175-Open items customer due date forecast
    Hope this helps
    Thanks
    Akash

Maybe you are looking for