Plantage LabVIEW 2010 F4
Bonjour à tous,
Je viens ici vous rapporter un petit bug concernant LabVIEW
2010 (F4).
Lors que l’on a utilisé une définition de type stricte
comprenant un cluster (obligatoire) qui contient lui-même différents types de
données (peu importe) pour créer une constante sur un diagramme et que cette
définition a été supprimée, cette
constante est affichée en transparence sur le diagramme (jusque là tout est
normal).
Si par malheur on a l’idée d’effectuer l’opération « Visualiser
en tant qu’icône » sur cette constante de type cluster, on obtient un
plantage de LabVIEW.
Est-ce un bug connu ? A-t-il déjà été rapporté ?
Problème uniquement sur la version française ?
Cordialement,
Da Helmut
Hello,
Ca ne sert strictement à rien, c'est sur mais ce n'est pas normal que ça plante ! Au pire on pourrait obtenir un message d'erreur...
J'ai fait remonter l'info ici et sur le forum Américain. Après, c'est à voir qui veut augmenter ses stats de CAR au support
Cordialement,
Da Helmut
Similar Messages
-
I build an application exe and then its installer along with run time environment.
The installers instals the application correctly but when I try to execute the application, I get an error that application has crashed and Windows must close it down or search for solutions online with this additional information for the crash.
Problem signature:
Problem Event Name: APPCRASH
Application Name: AGMS.exe
Application Version: 1.3.0.0
Application Timestamp: 4c24e8f5
Fault Module Name: lvrt.dll
Fault Module Version: 10.0.0.4033
Fault Module Timestamp: 4c9273f4
Exception Code: c0000005
Exception Offset: 00005310
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
I am using labview 2010 sp1 32 bit on a 64-bit machine, with the following specs
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130318-1533)
Language: English (Regional Setting: English)
System Manufacturer: Dell Inc.
System Model: Dell System XPS L502X
BIOS: Default System BIOS
Processor: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz (8 CPUs), ~2.0GHz
Memory: 8192MB RAM
Available OS Memory: 8106MB RAM
Page File: 3457MB used, 12753MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode
The exe /application runs fine on my PC but when I try to run it on another PC it crashes. The other PC has similar specs as given below
Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.140303-2144)
Language: English (Regional Setting: English)
System Manufacturer: LENOVO
System Model: HuronRiver Platform
BIOS: Default System BIOS
Processor: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz (4 CPUs), ~2.2GHz
Memory: 4096MB RAM
Available OS Memory: 4010MB RAM
Page File: 1359MB used, 6658MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode
I tried another machine, 64 bit of course, as I want to deploy my application on a 64bit PC, but still got the same problem.
This other machine was from HP, iCore 3 (4 CPUs) 2.2GHz, 4GB RAM and running Windows Professional 64 bit.
Now as I see it, it could be a Run-time environment mis-match error.
For this I tried installing a 64 bit LVRTE from NI, but still no sucess.
I checked DEP, for all 3 PCs and it was set to the following
Turn on DEP for essential Windows programs and services only (first option).
I am confused. I can not find a solution for this and it is really frustrating.But I am assuming that when I make the installer, the 32-bit Run Time Engine is appened with the installer, as show below
Since from the picture you can see its including the support installers from '\Program Files (x86)\'
The application runs queries to fetch data from database in SQL server 2008, and for that I am using a Microsoft SQL Native Client 2008 R2 64 bit ( this is the only version that installs on either PC, even the one on which I developed my LV Application).
I am not using any driver, only toolkits for reports - and for that I un-checked the "Remove unused polymorphic VI instances" when making the executable, otherwise LV throws up an exception that share variable are not being included.
Yes I did reboot every time after I ran the installation.
Still getting the same error. -
Run-time engine problem in Labview 2009 and Labview 2010
I have a problem with Labview 2009 and Labview 2010. I updated my Labview 2009 into 2010. But it turned out to be a trial one, because i did not have the serial number. So I uninstalled the Labview 2010. however, the funny stuff came over. I cannot use my Labview 2009. So i uninstalled Labview 2009 again. But eventually, I could not reinstall Labview 2009. Every time i had a runtime error and i could not proceed with the installation. in addition, any installation related to Labview is not permitted and the same error came up every time. it is very annoying.
So, What is the deal?
I attached the error here. Any comments or advice are welcomed and appreciated.
Attachments:
error.docx 2305 KBBy chance is this machine's language set to any non-English locale? You would check the locale setting by:
Opening Control Panel.
Opening "Regional and Language Options".
Looking Under "Regional Options" >> "Standards and Formats"
If it is set to something besides English, trying setting it to English and please report back what locale it was set to (or if this even solves the problem).
Regards,
- WesW -
Report Generation toolkit for labview 2010
H All.
I'm looking to download the report generation toolkit for labview 2010. When I proceed to download the toolkit from the national instrumnets website, it says that i need to labview 2011 or later in order to install it.
Is there a version of this report generation toollkit for labview 2010 and can someone provide a link maybe??.
Thanks for reading.
Solved!
Go to Solution.Try this: [Link removed, NI software downloads can be found on ni.com/downloads, the LabVIEW 2010 Report Generation Toolkit is available to customers with Standard Service Program here: http://joule.ni.com/nidu/cds/view/p/id/3247/lang/en, other customers may contact NI directly]
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community. -
We want to use LabVIEW 2010 to send/receive floating points from LabVIEW 2010 to/from a network (192.168.101.xxx) that utilizes GE ethernet global data protocol (EGD).
The network has several HMI's running Cimplicity Plant Edition 4.01.
We can configure Cimplicity to read modbus points from LabVIEW using LabVIEW's multi-variable editor and a modbus slave library.
However, we cannot get the points from LabVIEW to read/write to the EGD protocol. Anyone ever run into this?EGD is a UDP message (port 4746h) with a special header.See below for header structure (32 Bytes). Send UDP at constant rate. Limit user data to 1400 bytes. If you want to receive EGD data don't forget to increase the MaxSize connector on UDP receive to 1500. Are you using the a csv file or SDB Server to get tag names? Or manually entering tag names in cimplicity? This works much better than OPC because all parameters are contained in your labview executable. If you have a redundant cimplicity HMi Server send as Broadcast to the local subnet. All consumers will get the EGD telegram. Example IPA of 192.168.0.255. Server 1 IPA 192.168.0.1 and Server 2 IPA 192.168.0.2
Maybe to late for this project but would be a good upgrade or the next project. -
Integral blocks from labview 7.1 where is in labview 2010
Hi I must integrate sampled signal. In labview 7.1 is good checked blocks for it. But where is equivalent in labview 2010?? I cant find it.
Solved!
Go to Solution.
Attachments:
calkowanie.png 2 KBhttp://zone.ni.com/reference/en-XX/help/371361G-01/gmath/integral_xt/
Did you try the search capability for the functions palette?
Attachments:
functions search.png 17 KB -
No longer able to import CVI Instrument Driver in LabView 2010
Hello,
I used to be able to download the Import CVI Instrument Driver Wizard in LabView 2009, but there is no wizard for 2010?
I also tried importing the driver with the shared library import, but then Binary, Slides and Rings do not come up with their values i.e. if my slide in CVI has 3 positions :
Description Value
Item 1 1
Item 2 2
Item 3 3
or if my Binary has
Description Value
On 1
Off 0
they do not import the description into LabView 2010?
I tried copying the directories created by the 2009-wizard to the directories of 2010 i.e.:
from C:\Program Files\National Instruments\LabVIEW 2009\resource\CVIFpConv
to C:\Program Files\National Instruments\LabVIEW 2010\resource\CVIFpConv
and
from C:\Program Files\National Instruments\LabVIEW 2009\project\_DriverCtoLV
to C:\Program Files\National Instruments\LabVIEW 2010\project\_DriverCtoLV
and the wizard loads and runs until I specify a .fp file and then I get the error in the jpeg attached. When I try to open the block diagram (FC_RFL_Initialize.vi), it says you need a password to view it, so that stops my debugging.
Attachments:
Error using Instrument Driver Import Wizard in LabView 2010.JPG 88 KBHI,
I downloaded the wizard and when I tried to import a driver I got this message shown below...(labview 2010)
Thanks...Ness
Attachments:
Error message.JPG 140 KB -
Hello,
I tried to run my application on LM3S8962.
The build succeeded. All LEDs are green,
but the application doesn't run.
The error message appears in the status window:
[17:06:21] Status: Build Succeeded.
LV runtime error in file C:\Program Files\National Instruments\LabVIEW 2010\CCodeGen\libsrc\os\rtx\LVThreads_rtx.c at line 141: 2 19
This message isn't really enlightening to me.
Doesn't anyone know how to solve the problem?Hi Peter,
i tried to modify the code to isolate the problem.
With the attached code the new error message appears:
LV runtime error in file C:\Program Files\National Instruments\LabVIEW 2010\CCodeGen\libsrc\blockdiagram\CCGClusterSupport.c at line 141: 2 13
What are the limits of clusters in LV ARM?
My Toolchain:
Tool Version Numbers:
Toolchain: RealView MDK-ARM Version: 4.11
Toolchain Path: BIN40\
C Compiler: Armcc.Exe V4.0.0.728
Assembler: Armasm.Exe V4.0.0.728
Linker/Locator: ArmLink.Exe V4.0.0.728
Librarian: ArmAr.Exe V4.0.0.728
Hex Converter: FromElf.Exe V4.0.0.728
CPU DLL: SARMCM3.DLL V4.11
Dialog DLL: DLM.DLL V1.19a
Target DLL: BIN\UL2CM3.DLL V1.63
Dialog DLL: TLM.DLL V1.19a
Thanks
Marco
Attachments:
ICUA4_SOURCE_DISTRIBUTION.zip 463 KB -
Is it possible to disable the optimized compiler in LabVIEW 2010
Hello,
I have a project that take 3 minutes in LabVIEW 8.6 to build and now with LabVIEW 2010 it take 10.5 minutes. 3x more longer.
In fact my project as 61 .lvproj for a total of 4300 vi's that take 1 hour to build. If I interpolate, the entire build process will take 3 hours in LabVIEW 2010. This is not acceptable
I know that the new compiler optimize the code for better performance, but if I don't need better performance.
Is it possible to disable the optimized compiler in LabVIEW 2010 with an INI key in LabVIEW.ini.
Dany Allard
Dany Allard
Solved!
Go to Solution.Jarrod S. wrote:
One Application Builder setting you might try out to make builds go much more quickly is the Remove Unused Members of Project Libraries checkbox and the Modify Project Library File after Removi....
This can drastically cut down the build times. Note, however, that this option does not work well if your application will load external plug-in VIs when it runs, because the libraries of those plug-in VIs may conflict with the modified libraries in the executable file. If you don't have a plug-in architecture, this will not affect you.
The "Remove unused members of project libraries" was already selected but not the "Modify project library file after removing unused members" and selecting this cut the build time from 10.5 min to 4 min.
Thank you Jarrod for this tips
Dany
Dany Allard -
Hi
First off here is a link to a discussion of the problem. http://forums.ni.com/t5/LabVIEW/Error-6-occurred-when-building-an-Executable-in-Labview-2009/m-p/997...
I have tried all the suggestions on this link with no luck.
Background: have been using LabVIEW 2010 without problems since Sept, then I started getting the error 6 with the following message.
" Error 6 occurred at Delete in AB_Engine_Delete_Internal_Files.vi->AB_EXE.lvclass:Build.vi
->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller "
This started on one project and is now occurring on another project. Sometimes it builds 50% of the time, other times I can't get it to build at all. I have upgraded to SP1, no change.
Here are some things I have tried.
Moved build directory to c:\a
Renamed project, moved project right under c:\
Disabled Google , disabled Win indexing, disabled Win7 user acct. Control, run LabVIEW as Admit all the time, win explorer closed
mass compiling, closing the project, closing LabVIEW, re-booting
Unistalled LabVIEW 2010 SP1 and re-install, twice.
I believe I rebuilt my project in a new project.
I moved my projects to a WinXP system laptop I have, and they never get Error 6 ! Short term fix, but I have to use Win7. So I hope this means it is not my code.
The funny thing is that this is totally random. The unfunny thing is having to explain to a client I can't get my code to compile during a frustrating 95% of the time failure episode, yikes!
Any help and suggestions would be welcome.
BTW, the next step is to totally uninstall LabVIEW with a 'special' procedure and piece of code sent to me. Don't want to, but am really at wits end. Also waiting to hear back from my service ticket, but am desperate to have parallel solutions to try.
Thanks
Mark RamsdaleThanks for the clarify.
I also meant to post this link. It has a lot of info, this is the link I tried most if not all of the suggestions for.
http://forums.ni.com/t5/LabVIEW/Get-Error-6-about-50-of-time-when-building-Application/td-p/1242634
By the way, I was told that uninstalling LabVIEW will not resolve the issue, dodged a time killer :-)
It seems the error is caused by Win7 and file reserving. Waiting to hear back on that. Have an SR.
Again, any suggestions welcomed, maybe some Win7 ideas from those who know more about it.
mr
Mark Ramsdale -
Labview 2010 run-time engine silent install
I am having trouble with installing the run-time engine for LabVIEW 2010 with the silent option.
I am using the minimum version of the run-time engine.
Before I used the LV7 run-time engine. Then I could install it silently using LVRunTimeEng.exe /qb!
In LabVIEW 2010 the run-time engine is no longer a single file but a directory that contains the installation files. There are two files that can be used to launch the installer Setup.exe and LV2010runtime.msi.
Setup.exe does not seem to accept any command-line arguments. LV2010runtime.msi however accepts the command-line arguments and can be installed silently.
Now my problem is that I am building a windows installer using a third party application and it is only possible to launch exe files after the installation completes. Before I could launch the LVRunTimeEng.exe /qb! to install the labview 7 run-time engine but now when I have upgraded to labview 2010 I cannot do the same for Setup.exe.
My question is if it is possible to use the Setup.exe file to install the Labview 2010 run-time engine (minumum) silently?Setup.exe runs a number of other .exe files during its execution. This article looks like it will allow you to run setup.exe silently by supressing all messages and windows:
http://digital.ni.com/public.nsf/allkb/878FC4C374013ADF8625733D00688F67 -
Problem in converting a simulink model in LabVIEW 2010
hello,
I have developed a Simulink model in MATLAB which I want to convert into equivalent LabVIEW VI's. The simulink model is as attached. The problem here is:-
LabVIEW is not able to convert all the mechanical blocks named Ankle revolute joint, Body , joint actuator and joint sensor into equivalent LabVIEW VI.
Is it possible to convert those blocks into equivalent LabVIEW VI's?
PS:- I am using LabVIEW 2010.
Attachments:
AAFO.PNG 19 KBHi Susheel,
RFC module interface parameters (import, export , tables) can only refer to data dictionary types. Hence if you currently have one of the parameters referring to a type defined in your function group main include or in a type pool, you need to create a SE11 data dictionary structure/ table type for that and then change the data type reference.
Cheers,
Aditya -
How to get Point Grey Dragonfly firewire cameras to work with LabVIEW 2010
We recently got a new computer. The O.S. is Windows 7, 64-bit. It has LabVIEW 2010 (also 64-bit) and the Vision Development Module, as well as the Vision Acquisition Driver. We also have Point Grey Dragonfly Express cameras. The first trial of using LabVIEW to get images from one of the cameras yielded greyscale images (they are color cameras). We then installed the Point Grey drivers (flycapture2.1.3.4_x64). After installing the drivers, the camera was is no longer recognized in MAX. Does anyone have pointers or advice? Thanks.
It's been a bit since I've messed with camera settings. But I think LabVIEW requires the NI-IMAQdx driver and the greyscale was from not setting the bayer filter. I can't poke around my camera settings right now, so I can't double check.
-
3D graphs cause LabVIEW 2010 to hang
I've been using LabVIEW 2010 for several weeks without any problems, but today I noticed that it doesn't work at all with anything related to the 3D picture control. Today was the first time that I tried doing anything with the 3D picture tool since installing LV 2010. Dropping any of the 3D Graphs on the front panel of a new VI causes LV2010 to hang. (By hang, I mean the VI window remains open but most UI things no longer work. Right-clicking on the window does not show a context menu. The main menu doesn't work. The X button does not close the VI front panel window nor the diagram window. Control-Q does not cause LabVIEW to quit. I have to kill the process in Task Manager.) It is the same story with just a plaing 3D picture indicator. Also, the solarsystem.vi example does not work either. The problems start as soon as I open the solarsystem.vi. After killing LV with Task Manager and relaunching LV10, I do not get the LV message about a previous crash.
The problem I am talking about is for LabVIEW 2010 with the f2 patch running in Win7. I am actually running it using VMware Fusion 3.1.3 on a 2009 Mac Pro running Lion. The Mac drivers are all updated. Since it is VMware Fusion machine, the video driver on the Windows side is part of the VMware Tools installation, which is up to date.
After searching the forums, I've tried all the other potential solutions I could find: 1) repaired LV2010 using add/remove programs and 2) tried using the compatibilty mode settings to turn off Aero.
Interestingly, 3D graphs work fine on the Mac side for LV2010 for Mac.
Even more insterestingly, 3D graphs work fine on Win7 for LV 8.5, which I still have installed. The fact that it works fine for LV 8.5 would seem to indicate that Lion did not introduce the problem and that the video driver is working fine.
Solved!
Go to Solution.Yep, it's the same virtual machine. I set it up almost 2 years ago and it has been extremely stable. Both LabVIEW 8.5 and 2010 have been perfectly happy on it. It's a great way to do LabVIEW on Win7. I didn't notice any changes at all to the VM when I upgraded from Snow Leopard to Lion. I installed LabVIEW 2010 before upgrading to Lion, but I didn't have occasion to work with 3D controls before the upgrade to Lion so I don't know if it would have worked on Snow Leopard. The Mac versions of both LabVIEW 8.5 and LabVIEW 2010 also work great on the both Snow Leopard and Lion.
I happen to have an XP virtual machine too, but I haven't installed LabVIEW there. Let me know if that would be a worthwhile test.
You might check with Marc Page--unless he has already upgraded again I think he has a similar machine to mine.
The video card is the original stock:
NVIDIA GeForce GT 120:
Chipset Model: NVIDIA GeForce GT 120
Type: GPU
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0640
Revision ID: 0x00a1
ROM Revision: 3386
Displays:
Cinema HD Display:
Resolution: 2560 x 1600
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Rotation: Supported
Display Connector:
Status: No Display Connected -
Hi there,
I am planning to use Labview 2010 in a short time.
But before I'm going to use it I have some questions.
I know it is possible to run Labview 2010 in an XP environment. But is it also possible to, when running Labview 2010 on a XP system, to build a project to a version that is useful in a Windows 7 environment?
Or do I have to run Labview 2010, when I want to build a project that is useful on a Windows 7 system, on a system with Windows 7?
Please give me some information.
I hope to hear from one of you soon.
Regards,
Kenny
Solved!
Go to Solution.Is it possible to build a project with Labview 2009 on a Windows XP system, that is useful for a system with windows 7 on it?
Thanks.
Philippe B.
Certified Associate Developer / Dépt Moyens d'essais
www.ingenia-system.com
Maybe you are looking for
-
Bootcamp: Two keyboards needed -- one for Windows and one for Mac?
Oh, the ground-pounding frustration! I bought the Apple wireless (Bluetooth) keyboard with my new dual-core Intel iMac, and was told it would work in both Windows and Mac worlds. Not so! It works fine with Apple OS, but not with Windows XP. Frustrati
-
Want to reproduce choppiness in actors movements through editing/plugin ?
I recently watched a video that the actor's movements were intentional somewhat jerky/choppy through some editing and I would like to reproduce the choppiness. It seems to add a nice comedic effect to the video. How do you think this was done? Here's
-
My Library Column does not exist when I execute a Caml Query
Hello, I am new to SharePoint programming. I am trying to understand how I can access the documents in a Library Folder and obtain the field values for each document in the container. With this in mind I have pieced together the following code from
-
ORA-00997 - Illegal use os LONG Datatype
Hello I'm having this error in my query, and I know I can't use one column LONG with a INSERT statement, but I can't change this column to VARCHAR2(4000) because of the short space. Somebody have the solution for this? Or how I make this insert? Some
-
Upgrade MacBook OS from original Mac OS x 10.4.11 to higher Version
Hi Support Team, I am using an old MacBook installed with Mac OS x 10.4.11. I wish to upgrade my Max OS to a higher version. What could be done? Thanks, NORA