Plantage organiseur photoshop elements 10 fonction messages photos
Bonjour le forum. Je suis nouveau membre. Voici mon problème:
J'utilise Photoshop Elements 10 sur PC Windows Vista. Quand je veux partager des photos par la fonction Message Photo, l'Organiseur cesse de fonctionner (message puis fermeture). Ceci se produit après la saisie d'un sous-domaine (ex voyage) dans la fenêtre "Assistant papeterie et disposition", donc après la sélection des photos et le choix du destinataire. Ceci se produit aussi bien si je choisis l'email adobe service ou windows mail.
A noter que je peux envoyer des photos avec la fonction pièces jointes sans problème avec windows vista.
A noter également que je peux envoyer des messages photos sans problème avec window xp.
Merci à tout contributeur à la solution de ce problème
I am - yes. Sorry, forgot to add that to the original post.
Similar Messages
-
Photoshop Elements Help | Organize your photos in albums and album categories
This question was posted in response to the following article: http://helpx.adobe.com/photoshop-elements/getting-started/create-albums-album-categories.h tml
I always learn so much by everyone's postings and your response. Thanks much!
Date: Fri, 17 May 2013 08:23:30 -0700
From: [email protected]
To: [email protected]
Subject: Photoshop Elements Help | Organize your photos in albums and album categories
Re: Photoshop Elements Help | Organize your photos in albums and album categories
created by dj_paige in Photoshop Elements - View the full discussion
I have now downloaded all the pictures in my camera directly into PSE Organiser. The pictures are all in folders listed by date the pictures were taken. Are they now safely housed in the PSE program?
PSE does not contain your photos. The photos are on your hard disk(s) somewhere, wherever they were put when they were moved from the camera to the hard disk (might be the default location chosen by PSE).
Can I delete the old Canon programs, which are still sitting on my Mac?
Yes
And if I want to back up on an external hard-drive, how do I do that? Just drag the whole lot across?
Your interest in making backups is to be commended.
There are many ways to make backups, including the way you just suggested. You can also create a backup using PSE (which I recommend) since it includes the photos and the very important catalog file. In PSE, File->Backup Catalog, and set the destination of the backup to your external HD. Remember to do this regularly.
Sometimes when I've used 'Smart Fix" or other tools in the Photo Fix toolbox, I'm not happy with the result. But how can I 'undo' a fix and revert to how it was before?
PSE should create a version set when you do any editing, including the Smart Fix. Thus, you just need to expand the version set (right-click on the photo) to see both the original and the Smart Fix. Then you can delete the Smart Fix version.
-- I want to create an album "Europe 2012", and within it categories for UK, France, Italy etc. But although I hit 'create album category' when Europe 2012 is highlighted, the category just attaches to the last listed album - something completely unrelated. How do I ensure categories are within the correct albums?
I'm going to strongly recommend you don't do this via albums (unless your intent is to share the contents of the albums online somehow, in which case use Albums). I recommend you use tags instead of albums for this purpose. You can create a tag called Europe under Places, and another tag under Europe called France. I would also recommend you not bother including year or other calendar information in the tag (or album) names. You want "Europe" as your tag, not "Europe 2012". Why? Because you can always segregate by year (or other calendar time period) using the PSE Timeline; there's no need to do extra work to segregate the tags by year (or other calendar time period).
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5329550#5329550
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5329550#5329550
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5329550#5329550. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
What can I do with Creative Cloud and Photoshop ELEMENTS besides backup my photos?
What can I do with Creative Cloud and Photoshop ELEMENTS besides backup my photos?
Umm, seriously? No offense, but what you are saying is basically "I just bought a Mercedes, but don't know how to drive." You can plenty of info what each program in Creative Cloud does by just typing the respective words into a web search...
Mylenium -
Has anybody had a problem with the mouse cursor lagging when navigating the drop down menus? this only started happening after a re-install. it only occurs in Photoshop elements 13 in the photo editing section,and no other application. My mouse drivers are up to date.Any help or advice would be most welcome.
Good day!
Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements
and please read this (in particular the section titled "Supply pertinent information for quicker answers"):
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
Regards,
Pfaffenbichler -
Does iPhoto & photoshop elements share the same photo library
Does iPhoto & photoshop elements share the same photo library
By memory I assume you mean disk space. The best way to do that is to move your libraries to external HD's which are inexpensive. I keep my music, photo and movie libraries on EHD's which keeps my internal HD relatively free. My internal HD is 320GB however it still has 219GB free because I manage the internal HD for only the OS and critical files that are accessed daily. Here are two links that show how how easy it is to do:
iPhoto: How to move the Library to a EHD
iTunes: How to move the library to a EHD
If you get an EHD with a fast connection you probably won't see any difference in speed accessing files. If your machine has a FW800 port then use it with a FW800 EHD. Three drives I'd recommend for their quality and features are the:
OWC Mercury Elite Pro series
LaCie d2 Quadra series
G-Tech G-DRIVE series -
I changed my HD "C". After reinstalling P Element 2 I got a problem. I can't open Photoshop Element. Error message is "Your working disc is full" But I have 61Go free on "C" HD and more than 1To free on "D" disc.
Try resetting the pse 2 preferences and see if that clears things up.
reset preferences
Press and hold down the Shift+Ctrl+Alt keys just after starting the launch of pse 2
Keep holding the keys down until you get a dialog asking if you want to Delete the Adobe Photoshop Elements Settings File
Press Yes -
Can I use Photoshop Element 13 save the photo directly on OneDrive (hence the album eventually example) Reason, I use Office 365 and have so 1T
g.n.a.s
If your program is Photoshop Elements, you have posted in the wrong forum. Somehow your thread got posted in the Adobe Premiere Elements Forum (video editing).
If this is the case, please re-post your thread in the Adobe Photoshop Elements Forum or wait for a moderator to see your thread here and move it from here to there.
Photoshop Elements
Thank you.
ATR -
I change my computer. Now Photoshop element send this message erreur:150:30. How can I fix it?
duplicate post, see:
my computer(mac) was broken, I buy a new one. Photoshop element (buyed on ligne from adobe) does not want to open now. -
Avec mon ordinateur SONY VAIO et Windows S7 j'utilise l'Organiseur de Photoshop Element 11. Mon catalogue principal contient 13000 photos, un autre 1500. ... Quand j'emplois la "fonction recherche avancée" et consulte la colonne "Lieux" des photos sont déterminée en donnant le positionnement du lieu ou a été prise la photo en donnant : l'état (exemple "France" ), la ville (exemple "Paris"), la rue (exemple Champs-Elysées) et le numéros dans la rue. Dans mon cas beaucoup de photos ne sont pas toutes répertoriées. Déjà dans le catalogue de 15 000 mais aussi dans celui de 1500. Par exemple aucune n'est indiquée de la Californie, l'Angleterre, ni la Camargue pourtant elles ont des données GPS, et quand je prend le menu "LIEUX" en haut de de l'écran de l'organiseur, les photos apparaissent sur la carte. .
Avec mon ordinateur SONY VAIO et Windows S7 j'utilise l'Organiseur de Photoshop Element 11. Mon catalogue principal contient 13000 photos, un autre 1500. ... Quand j'emplois la "fonction recherche avancée" et consulte la colonne "Lieux" des photos sont déterminée en donnant le positionnement du lieu ou a été prise la photo en donnant : l'état (exemple "France" ), la ville (exemple "Paris"), la rue (exemple Champs-Elysées) et le numéros dans la rue. Dans mon cas beaucoup de photos ne sont pas toutes répertoriées. Déjà dans le catalogue de 15 000 mais aussi dans celui de 1500. Par exemple aucune n'est indiquée de la Californie, l'Angleterre, ni la Camargue pourtant elles ont des données GPS, et quand je prend le menu "LIEUX" en haut de de l'écran de l'organiseur, les photos apparaissent sur la carte. .
-
Organiseur photoshop element 11
photoshop11 catalogue : les nouveaux elements figurants avec des localisations visibles sur "map" n'ont plus d'étiquette avec l'adresse. catalogue de 20 000 elements, systeme windows 7,sur SONY VAIO
Merci pour votre réponse rapide.
Cordialement
Patrick Delamare
Le 9 avr. 2013 à 08:00, andaleebfatima1 <[email protected]> a écrit :
Re: erreur au demarrage de adobe organiseur
created by andaleebfatima1 in Photoshop Elements - View the full discussion
Are there any .mkv files in your organizer catalog. The module which is crashing is possibly trying to analyze those files. Please turn off Media Analysis in Edit >> Pref >> Media analysis in Organizer and see if the issue happens.
For more on this see- http://forums.adobe.com/message/5127862
Also, I would suggest posting this issue in Premiere Elements Forum http://forums.adobe.com/community/premiere_elements for a better solution to the issue.
Thanks
Andaleeb
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5218368#5218368
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5218368#5218368
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5218368#5218368. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
How to get Elements 10 to open in Windows 8 ?
See the error message quoted above in the subject line.See this help document:
https://helpx.adobe.com/photoshop-elements/kb/microsoft-c-runtime-error-launcing.html -
0pen with Photoshop elements 10 dont load photos
Hello,
In Win7 ultimate when i try to open raw or jpg photos clicking on right key of the mouse "open with" Photoshop elements 10, the
program start but never image is loaded. This issue is in Italy version. Please tell me is happen also in your version,is so this may be
a bug. Tank you.Hello,
I am using English version of PSE10 on same plateform but i am facing this type of issue.
I can suggest you to make PSE10 as default program to open any image.
To make PSE10 as default program :- Do Right click on image -> open with , then click browse then navigate to PSE .exe file and select it.
This may solve your problem.
Cheers,
Sam -
Open Raw image in Photoshop Elements 6 from I Photo 09 plug in procedure
I am currently importing my photos into IPhoto 09 and editing in Elements 6. I now want to start using raw format but need the procedure for the plug in. I believe I have to manually copy the plug in in the root library but can't find the instructions. Can someone help?
I found the instructions I was looking for on the internet, see below. I downloaded the Raw Plug In for my Camera 4.4.1 followed the instructions below and now when I pick edit in IPhoto09 it opens the Elements Raw Converter. You are correct though, when I finish with converter and open elements for additional editing and save as JPEG it doesn't seem to go into IPhoto like the JPEG files I edit in Elements do.
You can download the latest versions of ACR from the Adobe (http://www.adobe.com/support/downloads/product.jsp?product=106&platform=macintos h) downloads site.
We have an article on ACR in the next issue of the Photoshop Elements Techniques newsletter, but here's the simple instructions for installing an ACR update on the Mac:
If Elements is running, close it.
Open your mac’s hard drive by double-clicking on its icon.
If you are running Elements 6, open the folder Library/Application support/Adobe/Plug-ins/CS3/File Formats.
In the File Formats folder, find the file called Camera Raw.8bi and move it to a folder on your desktop (or another, different location you will be able to find easily). This will serve as a backup in case there’s a problem with the installation. I usually make a folder on my desktop and name it old ACR.
Open the unzipped folder you downloaded and copy the new Camera Raw.8bi file into the File Formats folder that contained the old version (Library/Application Support/Adobe/Plug-ins/CS3/File Formats). After it is copied, you can close that folder.
Launch Photoshop Elements again, and you should be ready to go. -
Adobe Photoshop Elements 6 error message on reinstall
My Photoshop Elements 6 stopped responding so I removed it and tried to reinstall with my disc. It begins installation, then I get an error message "Key not valid for use in specified state," and ends the installation. I have had this program for several years, upgraded to Elements 12 and did not like the new format so went back to Elements 6. I was not given an opportunity to enter my validation key if, in fact, that is what the message means. Can anyone help me?
The serial number is not referred to as a key. Generally, if you are on Windows, a Key would refer to a registry key. This could mean that there is some part of Elements left on your system in the Registry and preventing a reinstall. Follow this list and remove all the remaining pieces (change the version number from 9 to 6): Manually remove Photoshop Elements 9 | Windows
-
Adobe Photoshop Elements 12: Create Web Photo Gallery
Adobe Photoshop Elements 12: I need to create a Web Photo Gallery so I can upload thumbnails and full-size pictures to my own website. Does anyone have an idea? No Facebook, Flickr, Adobe Revel etc.
Barbara, thank you very much. I really miss it. I have tested jalbum. It's great.
PSE 12 should also offer something like this.
Maybe you are looking for
-
Production Order Reservation for Available Quantity?
Hi Gurus: We have the following situation. Production order is created for material A. Component Z on this order requires 100 units. 10 Units are available in stock for Batch M. Reservation is created for 100 units of Batch M. Availablility Chec
-
After I installed my iWork then when tried to open it it will not open what should i do? Please help.
-
How to display a message after a successful save
Hi, Iam trying to save some data in the backend. After successful save it should show a message as " The data is successfully saved. The product you have saved is : xxxx". Now my question is what should be used to show the message. Would it be better
-
How to Add 15 Days to the current Date in eCATT
Hello eCATT Guru's, How to add 15 days to the current date in eCATT. I have changed the Date format to mm/dd/yyyy. now i want to add 15 days to the sy-datum. How to do that.do any one know? Thanks in Advance, Raj
-
Customizing Flash Player 10 Install
Greetings: I registered and downloaded the flash player 10 install executable. I want to push it out to about 425 machines, but do not want the Google toolbar. It messes up other software we have at our institution. Is there a command line parameter