Plantwise separate number range for Production order

Hello SAP Expert,
  I my project our client require plantwise number range for Production order,order Confirmation for indentifiction purpose .
   Please give way to do this.
Thanks in advance.
Regards,
Yogesh.

Hi,
As per standard SAP not possible because Order types are maintain at Client level and not at Plant Level, but as Sukender said use Different Order Types for different Plants.But I guess user will face one problem often during Manual Production / Process Order Creation , and that is if they select wrong order type then face a problem like no Order type dependent Parameter set for required Plant.
Regards,
Dhaval

Similar Messages

  • Number range for Production order

    Dear All SAP PP Gurus,
    I am new to SAP PP and want to learn about number ranges for production order.
    Can anyone tell me step by step procedure for creating & Assigning
    number range.
    Thanks in advance.
    Regards.

    Hi MIHIR,
    I just chkd the blog spot of MR Siva.
    It is very much self expalnatory.
    Siva ,pls update more documents in ur blog,it is very much helpful
    THNX all

  • Number Range for production order / Planned order

    Number Range for production order / Planned order depends upon what?
    Plant, order type, mrp controller??

    Dear,
    Number Range for production order :- Client Specific assign to the order type You can check in CO82 and OPJH.
    Planned order  :- Plant specific OPPQ or OMI2.  Number ranges for Manual creation - OMI3
    Hope clear to you.
    Regards,
    R.Brahmankar

  • Number range for production order is running out! Please help..

    Hi,
    Our number range for the production order is running out, can anyone please guide me how to extend or create a new number range?
    I try to go to CO82, there is no where for me to add a new range. Also, I can't extend continuosly the number range cause the next number already assigned to another order type.
    What can I do?
    Kindly please help. Thank you.

    Hi,
    All i would suggest before fixing on the number of digits, look at your past pattern. Estimate the number of orders which you plan to create for a given order type, based on that select the number of digits.
    Now if you wish to increase from 7 to 8, its fine, it will not be an issue, once you define the number range, system will throw a message if it overlaps, so you can be rest assured about that. Assign the new number range to the order type & standard SAP will take care of the rest. However if you have any custom reports / developments, just ensure that there is no hard coding to read only 7 digits. Apart from that it should work fine.
    Hope the above resolves the issue.
    Regards,
    Vivek
    Added
    Please do not amend the existing number range or do any modifications to the same, it will lead to inconsistencies. So create a new range & assign the same to the order types
    Edited by: Vivek on Mar 13, 2009 10:43 AM

  • External Number range for Production Order with additional logic

    Hi gurus,
    My requirement is -
    I have two products - for my Local and Export
    I have made two Order type for local and Export - say LOCL and EXPO
    My LOCL order no will start with L and EXPO with E
    I can do this with external number range set for each order type..
    Now my question is -
    My client wants Production Order in this fashion -
    L20111------
    L is local, 2011 is year, 1 is jan (1 to 9 - Jan to Sept, A - Oct, B- Nov, C - Dec) followed by a serial number
    How can we address this in SAP?
    Any clues?
    Thanks for your suggestion in advance.
    Regards,
    Srinivas

    Hai,
    You need to use User exit for this.  kindly contact your ABAP team.

  • Number range for different order types

    hi
    pl tell me how to create the number ranges for production order s and how to assign this number ranges to different order types in production server.
    thanks and regards

    Dear ,
    Goto CO82 ,
    1.Frist you should review in the Overview Screen (Hit the Orview in CO82) wether you have option to create the group as per required number ranges for two order type
    2.Hit the Pencil Button of the Group : It will take you "Maintain Number Ranges Group" and Select Group on the top -
    Insert.It will pop up with Inser Group Window .Enter the Text , Enter Number Ranges (From no /To No) and then hot the insert button (+ sign) .You have to create two number ranges group as per your requirement
    3.Now select you order type and hit the Select Eelement (Nip symbol) , select the resepctive group , then Hit Element/Group Tab .Once you follow this steps , you will find your Oredr type assigned to respective number ranges group.
    4.To cross check , you select the number ranges group and hit the Spec button to see the correct number ranges .
    5.MAKE SURE THAT YOU HAVE ORDER TYPE CREATED BEFORE YOU CREATE THEIR NUMBER RANGES -OPJH
    Revery back if u need any help
    Regards
    JH

  • Separate number ranges for GR against PO and GR against Production Order

    All SAP Gurus,
    Is it possible to have Separate number ranges (for Material Documents as well as for FI Documents) for GR against PO and for GR against Production Order?
    Regards,

    Hello Anusha,
    Basically you need to maintain the confirmation control key in the Info record or the vendor master in order get the option of doing an inbound delivery and not a rough GR. in info record in purchasing screen and also the same screen in vendor master.
    The above is a permanent setting for a vendor, if you want to do it temporarily, you need to go to the confirmations tab in PO item details and change the control key in there.
    I hope this is what you are looking for
    regards,

  • How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_0

    How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_001 using Functional Module NUMBER_GET_NEXT explain me ?

    Hi,
    First go thourh the FM import export parameters list.
    Try to create an internal table of type INRI-NRRANGENR for number ranges.
    We can provide the lower and higher values for this table so that what ever PO is created will be with that range.
    Try to create the ncessary ones using this FM.
    In the Exit, EXIT_SAPMM06E_001,
    the Export parameters are-
    EKKO-EBELN- the PO ios created with in that specified range
    Range as INRI-NRRANGENR - Here try to assign the Internal table that was populated in the FM.
    Try to code this in the Include provded and keep Breakpint and check the PO number generated.
    Reply if u need more help on this.
    Reward if helpful.
    Best Wishes,
    Chandralekha

  • External Alphanumeric Number Range for Internal Orders

    Hello,
    I am trying to create external number range for Internal Order Type. I want to create internal orders which will have internal order number as alphanumeric and some will be in only numbers.
    How should be the range look like, so that I have flexibility to enter Internal Order number as whatever format I want i.e. T123, 12MP, 1234, ABCD etc.
    Any help will be appreciated.
    Thanks.

    how many do you need?
    Just one, that covers all?
    a0000000 - zzzzzzzz

  • Number ranges for purchase order in SUS- why?

    Dear Gurus,
    In SPRO settings, I have seen the option for defining the number range for purchase order in supplier self service system. similarly, there is an option for defining the number range for purchase order response.
    Why do we need to define the number range for purchase order and its response in SUS system? In SUS system, the purchasing documents from SRM and MM system create corresponding Sales Order and its follow-on document. So, we need to define the number range for sales order not purchase order.
    In spro documents, it says you need to define the number range only if you create purchase order locally in SUS.
    What does it mean?
    regards,
    Ranjan

    Hi Ranjan,
    Unfortunately in SUS, Sales orders are referred to as Purchase orders only. Hence any PO with a number say 450000000 that comes into SUS will have a corresponding number in SUS as 19000000.
    Sam has already explained the PO response part.
    Regards,
    Nikhil

  • Number Range for Transfer Order

    Hi,
    When I create transfer order with reference to outbound delivery, an error message says "Maintain number range 01 for transfer order". I could see the number range 01 maintained in T- code SDPI. But I would like to know how we maintain number ranges for transfer orders and why this error message has come?
    Thanks,
    Betty

    Hi
    In-img-logistics execution-shipping -pickinglean ware house management--define control paramaters and no ranges for lean warehouse management
    1.Here you will define the control parameters for lean warehouse ( no ranges too)
    2.Define no ranges
    3. Assign no ranges
    Please check have you maintained entries for your warehouse here if it is lean
    In img----logistics execution-warehouse management-master data--define no ranges
    T code OMLW if it is central warehouse
    Regards
    Raja

  • Number range for Maintenance Order (IW31) - Any exit

    Hi All,
    I need to go for internal number overwite for Maintenance Order (IW31)for object AUFTRAG .
    I am going to maintain ztable which contain order type and  NRRANGENR.So,based on the ordertype i have to populate  NRRANGENR in the exit.
    Can you please tell me any exit or badi or through enhancement spot we can apply number range for maintenance order.
    Thanks .
    With Regards,
    Ambrose

    Hi,
    Do you need an exit ?
    You could create number range groups each with a specific number range. Then assign each order type to a particular group depending on which number range you want it linked to. If necessary have a different group for each order type.
    Configuration can be done in transaction SNRO for object AUFTRAG.
    -Paul
    Moving to [Enterprise Asset Management (EAM)|Enterprise Asset Management (SAP EAM); forum (for PM/CS specific topics).

  • Different number ranges for same order type

    Hi PP Guru's ,
    Can anyone send me the user exit for the differnet number range creation for the same order type.
    Same order type is used in two different Plants. So our client want to track the production order plantwise.
    Thanx in advance.
    Regards,
    Nagraj

    Hi Nagaraj,
    The number range is defined at order type level ( i.e. client level)
    So if you want to use different number range for different plant,  then use different order type for different plants.
    Thanks and regards
    Murugesan

  • Number Range for Purchase order

    Hi MM Masters,
    Kindly give the solution in SAP for the following scenario.
    The organisation consists of 5 company codes and 16 plants.
    How to maintain the Number ranges for the Purchase orders Plantwise?
    This requirement is for easy identification of Purchase orders on the basis of plants.
    Like for Plant 1 - 4500000000 to 4500050000
               Plant 2 -  4500050001 to 4500060000
               Plant 3 -  4500060001 to 4500070000 etc.
    Kindly guide me. This requirement is urgent.
    Regards
    Yoganarasimha

    Hello Raj,
    You need to define number range as usual, but when using the user exit at that time you need to give logic as per your requirement. Purchase order will allow to create two different line item for two different plant under the same company code so you need to consider that also (if using company specific or multi plant assignment for one purchase organization).
    Work with developer for coding and expain him/her the logic, I am not technical expert so regret for not helping on coding.
    Hope this helps.
    Arif Mansuri

  • Number Range for Maintenance Order Type

    Dear All,
    Please help me in regarding for Number range  Change in Maintenance Order Type.
    I have different types of maintenance order...such as PM01,PM02, PM03, PM04, PM05, PM06, PM07, PM08.
    and i have to assign number range different for all the maintenance order type. kindly help how can i assign the same separately.
    also in case of Notification types also.
    Early response is highly appreciated.
    Thanks
    Sushant

    Greetings Sushant,
    Firstly, maintain all the Order Types you want in SPRO.
    To maintain the number ranges, you will need to go to t-code OION. Then select "Maintain Groups (F6)" and create a group with a number range for each of the Order Types that you require.  Each will be a separate interval. Then place the cursor on the unassigned Order Type and select "Assign Element Group (F7)" Repeat for each Order Type.
    Notification number ranges are maintained in t-code IW20

Maybe you are looking for