Plasma 5 fails to start after update

After last kde packages update, my plasma desktop won't start anymore. When I run 'startkde', I get the error:
➜ ~ startkde
startkde: Starting up...
KCrash: Application 'kdeinit5' crashing...
KCrash: Attempting to start /usr/lib/drkonqi from kdeinit
sock_file=/run/user/1000/kdeinit5__0
KCrash: Application 'kdeinit5' crashing...
KCrash: Attempting to start /usr/lib/drkonqi from kdeinit
sock_file=/run/user/1000/kdeinit5__0
KCrash: Application 'kdeinit5' crashing...
KCrash: Attempting to start /usr/lib/drkonqi from kdeinit
sock_file=/run/user/1000/kdeinit5__0
startkde: Shutting down...
klauncher: Exiting on signal 1
startkde: Running shutdown scripts...
startkde: Done.
I found that running with sudo it works. I tried chowing and chmoding 777 the directory /run/user/1000 but made no difference. All other desktop environments and applications seem to work normal. What could be causing this issue?
Thanks in advance and happy new year

Found the solution: https://bugs.freedesktop.org/show_bug.cgi?id=85657
Thx!

Similar Messages

ColdFusion 8 Fails to start after update Java for Mac OSX 10.5 Update 4

I have been using ColdFusion on a Mac for years. Now CF fails to start after I updated Java for Mac OS X 10.5 Update 4. I usually start by typing in the terminal window sudo /Applications/ColdFusion8/bin/ColdFusion start.
There is a crash report but I don't know how to read it. See attached.
Please help, I need this working for my job.
Thanks...Colin

Dear Craig,
Macbook Pro 2.4GHz Intel Core 2 Duo 4 GB RAM
I'm sure that this is 64-bit
CF 8.0.1 Enterprise Build 3080
I had moved the Java SE 6 to the top in both Plugin and Applications. The
correct version is showing in the terminal window. See below.
Last login: Thu Jun 18 11:27:09 on ttys001
Beta-4:~ Colin$ java -version
java version "1.6.0_13"
Java(TM) SE Runtime Environment (build 1.6.0_13-b03-211)
Java HotSpot(TM) 64-Bit Server VM (build 11.3-b02-83, mixed mode)
Beta-4:~ Colin$
CF will not start. I have the activity monitor open, and when I start CF you
see it in the activity monitor for a few seconds as it starts up. When the
message process is completed in the terminal window CF disappears in the
activity monitor.
Any suggestions?
C
Hi, Colin,
My apologies but I forgot to ask 2 questions: (1) What kind of Mac you have
(Intel or PowerPC)? (2) What version of CF are you running and what installer
did you choose (8 or 8.0.1, 32-bit, 64-bit, etc.)?
To start, try the following:
1. Normally you'd shut CF down first ... but that's not necessary for you
2. Open Java Preferences again
3. Select Java SE 6 and move it (drag) to the top spot in both section (Applet
Plugin and Applications)
4. Open Terminal
5. Type java -version (you should see 1.6.0_13 as the new version)
6. Try to start CF again
This may not work (I've had issues with it) but it's technically how it's
supposed to work. With the Java Preferences utility, you're visually setting a
default JVM (you can do it with commands in Terminal but this is much faster
and easier).
If CF still won't start, look for the jvm.config file in your CF application
folder (try /Applications/ColdFusion8/bin or
/Applications/ColdFusion8/runtime/bin -- the latter is where a jvm.config file
is on my machine for a particular version of CF that's installed similar to
yours). You can override the JVM in this file but, hopefully, that won't be
necessary!
Best,
Craig

Session failed to start - after updating to IOS 7

I've updated to my iphone 4 to IOS 7 and now it won't sync with itunes. Its says "session failed to start". Help!

On the advice I got from others, here's what I finally did:
1. I connected my iPhone to my PC and backed it up to iTunes. Even though the phone doesn't sync, it will still back up and it did.
2. I then went in to settings on my iPhone under "Reset" and did the "Erase All Content and Settings", while still leaving my iPhone connected to my computer.
3. Once the phone booted back up, iTunes asked me if I wanted to restore my phone from back up. I chose restore and it restored my phone back and it is now working 100%. I'll add that it froze up during the restore process and I simply rebooted my PC and the ran sync and it finally worked. Took forever for my apps to all load back (couple of hours), but its fixed and working great.
I cannot tell you how upset I am with Apple. Many of us have this same issue and Apple has done nothing to help us or fix it. I've wasted 12 hours of my life on something that should have been simple and seamless. Isn't that the point of Apple and iPhones?

X240 window 8 Pro - system failed to start after update

Mircosoft pushed an update to my week old x240. After the update, I cannot load window8 pro any more . "Auto repair" says PC didn't start correctly. When I refresh PC , "the drive where Window is installed is locked Unlock the drive any try again." My BitLocker has been activated and Laptop was running fine before this update on 8/4/2014. Called Lenovo and Mircosoft, of course no help. PLEASE HELP!

Hello sir,
Here's what you need to do.
1. Enter into BIOS setup and set Virtualization as disabled and reboot system.
2. After booting windows 8, enter into Control panel and remove bluetooth driver.
3. Download and install Ralink Bluetooth driver version 9.2.101.10 (SP59632)
4. Reboot system and enable Virtualization Technology again.
Hope this helps.
I feel like asking for thumbs up after I tell you to mark my post as Kudos if it solves your problem.

Application fails to start after updating to AIR 2.6 on Centos OS

Hi Gordon,
   I'm using Centos OS and need to update the Adobe Air from 2.0 to 2.6. I downloaded the new released and used the rpm command.
   After that i type rpm -qi adobeair and clearly specify that I have Adobe 2.6.0.
   Well, the fact is that when I try to run our Air application, it simply does nothing.
   What should i do?
regards.

Hi Gordon,
   I'm using Centos OS and need to update the Adobe Air from 2.0 to 2.6. I downloaded the new released and used the rpm command.
   After that i type rpm -qi adobeair and clearly specify that I have Adobe 2.6.0.
   Well, the fact is that when I try to run our Air application, it simply does nothing.
   What should i do?
regards.

IBook fails to start after update

Hello,
I completed the most recent software update and shutdown my iBook. Today when I attempted to turn it on – nothing. No chime, no screen and it will not turn on.
The battery is fully charged and the AC adapter is working (the green ring is lit when plugged in). I have taken the battery out and unplugged it as well as followed the trouble shooting information (Apple - troubleshooting portables that won't turn on or start up)with no luck.
I am afraid it’s hardware related – However, like anybody who has not run a backup in a while….. I was hoping someone has another idea or has experienced this.
Thanks.
Ibook G3 Mac OS X (10.4.6)

Steve,
Your iBook sounds like it could have a bad DC-in board. Do you know anyone with another battery you could try in your iBook? Or are you close to an Apple Store where you could take it in and have them try a different battery?
When my husband's adapter tip broke off in the adapter port, damaging the DC-in board, his iBook would only run from a charged battery. It would not run from the adapter, and it would not charge the battery. He still could use it with a charged battery, and he and I swapped batteries, allowing my iBook to charge both batteries, until he could get his iBook fixed.
When you push the test button on the battery, how many lights do you see?
If your iBook will run from a charged battery, chances are that it is the DC-in board causing your problem. All the green light on the adapter means is that the battery is not charging. When everything is working right, that means the battery is fully charged. When things aren't working right, there may be other reasons why the battery is not charging.

Leopard fails to start after update

I recently updated my g5 to Leopard (clean install) and all was fine until last night when I was prompted with five updates (Quicktime, iDVD, iPhoto, iTunes and Garageband) I downloaded and installed (got the update boot caches message). The G5 rebooted but is now stuck on the grey apple screen with the twirling icon and the fans are howling away.
Has anyone exerienced this? Need help.
Thanks

Ok so here's what happened for those who end up in a similar situation. I booted to 10.5 and ran the verify...couldn't verify...ran repair...couldn't repair...ran Disk Warrior...found many error's and fixed them but couldn't replace the directory. So I had to rebuild from a clean install...again. Don't know wht so many errors...possible HD replacement needed. However, the moral of the story goes...
Don't perform any updates until you know for sure that your HD has no directory errors.

Imovie 11 failing to start after 10.6.5 update (same issue with iphoto)

Hi,
My imovie 11 is now failing to start after 10.6.5 update, I reinstalled ilife and it's still failing.
Same issue for iphoto .
Help
Benoit

help help help. imovie 11 works fine until i populate iphoto with any photos what so ever then it just fails to kick off after looking for new video from iphoto. works fine again when i delete the iphoto libary but i don,t want to do this each time i want to use imovie.....very disapointed

HT1349 ITunes failed to start after an upgrade, won't allow me to re-install saying "Apple Mobile Device failed to start, check for sufficient priveleges"

My ITunes library failed to start after an upgrade, now I'm unable to open or re-install. Receive an error message stating that "apple mobile device failed to start, check to see that you have sufficient priveleges to run system". Any help with this? I've tried un-installing and downloading only to get the same message again.

Thank you to "turingtest2", solution for someone else worked for me as well!

Multiple Oracle Homes - Oracle Listener failes to start after installation

Just in case the listener fails to start after an oracle installation, please check the oracle ports in the listener.ora and tnsnames.ora, both of which are present in the following directory:
...\oracle\<SID>\<Ver>\NETWORK\ADMIN
All installations should have separate listener ports eg. If the first installation has port 1527, the next one should be 1528 and so on..
If they do not, manually change the ports and start the listeners.
Also check SAP Note 98252. Although I didn't find it necessary (I think it applies only if you have a single listener for all oracle homes), it did give me an idea that there some config problem in the .ora files.
Also see [this thread|Oracle Listener error in Import ABAP phase?; for related details

hi
thanks for the help ,
I have been using the SQL Server , i am totally blank about Oracle
i am totally confused with this user, and hoststring
i logged in to the enterprise manager using System and manager password
But i cannot connect to any database using SQL Server
i am not remembering any user name or password i have given during installation.
the only thing i remember is
Global databasename = (globedb) i have given
For SID = globedb the same name i have given
for sys ,i have given sysdb as password
and for system i have given systemdb as password
with this can i do anything
when expand the schemas ,i can see the XDB,SCOTT and SYS . how can i login to this .
if i want to login to the scott
what would be the username,password,and hoststring. since i haven't set any password and username ,there would be some default username ,password, and hoststring.
if any one can help me please help me
thanks regards

Only half of the body just below the camera and steel side of camera side is getting heated up just after 10 , 15 mins of usage i my iphone 4 is it normal...as earlier the body was not heating up even after 2 hours....the problem started after updating t

only half of the body just below the camera and steel side of camera side is getting heated up just after 10 , 15 mins of usage i my iphone 4 is it normal...as earlier the body was not heating up even after 2 hours....the problem started after updating to 6.1.2
iPhone 4, iOS 6.1.2

Hi, did you ever solve this problem?
My 1 year old -- ha! one month out of warranty -- iPhone 4 has been having a nearly identical problem over the past few days.
It started by dying completely so I had the battery replaced, thinking it was simply battery issue.
It then worked again for a moment but started doing exactly what you describe, going through a reset cycle (longer than 30 seconds but who's counting). And it felt quite warm.
Did hard reset, plugged into wall charger and MBP USB but the new battery wouldn't even get a full charge (a whopping 92% after nearly two days). It would even lose battery when plugged in if I opened an app. And all the while plugged in, if I left the phone on, it would cycle through these resets. So I turned it off to try to charge it.
Now suddenly, it's dead again. Totally black, and hard reset does nothing. Up until two days ago there was nothing wrong whatsoever with this phone! And I hadn't even installed a new app that could be the root of the issue. No idea whatsoever what caused this.
Any help would be much appreciated!!

FF doesn't start after update to version 27.0.1

FF doesn't start after update to version 27.0.1
Crash ID: bp-2bc18734-d643-4843-a10f-fd6102140214

Firefox 27.0.1 is too new for me to know what unique issues it might have. I will message you a link to download the installer for Firefox 27.0 to see whether that reverses the problem.

Firefox won't start after update - nothing in support pages helps

windows 7 - firefox won't start after update - no support pages are relevant

-> [[Firefox will not start]]
Check and tell if its working.

TS3367 when i try to FaceTime on my iPod touch, and the call gets accepted it says connecting... and then just goes to FaceTime failed. this started after a 800 number called my FaceTime. i have tried putting in several other emails & on diff wifi. sugges

when i try to FaceTime on my iPod touch, and the call gets accepted it says connecting... and then just goes to FaceTime failed. this started after a 800 number called my FaceTime. i have tried putting in several other emails & on diff wifi. suggestions??
i have also tried facetiming with several other people. the same thing has hapened every single time and it has always worked just fine until that 800 number called me.

Judging by all the posts on the forum, there seems to be an issue at Apple's end, although they have made no announcement on their status page. Some users have reported that Apple is aware of the issue.
http://www.apple.com/support/systemstatus/

Failed to start ranking update due to this error - Authoritative Pages

Hello together,
i always get an error if i add an Authoritative Web Page and use the Option "Relevance Ranking Analytics".
The error is:
Failed to start ranking update due to this error: Failed to connect to system manager. SystemManagerLocations: net.tcp://SERVER/64BFD2/AdminComponent1/Management
Does anyone have a solution?
The Search Service component´s are running!
Best Regards
Darius.K

Hi! I had this issue and I was able to resolve it by retrying from an application server (I was trying to run from an Index server and that's not where the admin component was located in my topology)

Plasma 5 fails to start after update

Similar Messages

Maybe you are looking for