Plastic frame/strip has small gap and a little loose on iPad 2

I have an iPad 2 and recently noticed that near the upper right side, the thin black plastic trim/frame between the silver backing and glass bevel/screen has a small gap and moves a little if I press with my thumbnail. You have to look close to notice it, but I am wondering if this is a problem or could become a problem? I may be looking for perfection, given that it is an Apple product and have returned 4 previous droid tablets due to cosmetic issues, but ultimately would love some feedback to either gain peace of mind or advisement on if I need to address a potential issue. Thanks!

I'd take it into your local apple store and have them look at it. If it's a defect it needs to be addressed, or at least documented in case it worsens.

Similar Messages

The recent IOs 7.1 has been slow and unstable on both my iPad and iPhone, is there a fix?

The recent IOs 7.1 has been slow and unstable on both my iPad and iPhone, is there a fix? It is very slow, e.g copy and paste from a browser.
iPhone 5 & iPad gen 4

I restarted my phone as suggested and it is still happening.
My phone just blacks out at its own will as if the battery went dead then the apple logo appears and it restarts on it's own but my battery was still at 30% when it restarted. So that made no sense. When I try to type in my password it freezes up before I can get all of the characters in. I still hear the clicks of my tapping on the keyboard but nothing is changing on the screen. When I hit the enter button on accident it vibrated to tell me my password was incorrect but still the screen was frozen with my previous entry of the first 5 characters on the screen.
I am becoming concerned that I may have a very expensive paperweight now.
My husband has the same phone and his is working fine after the initial reboot.

My iphone, when listening to ipod, has small gaps in songs (1 sec or less), yet in itunes, the gaps are not there?

Basically, I've had it with a few songs now, where a random part of the song, has a small gap in it, where as on my iTunes, there is no gap, I orignally thought it could be from where I burned the CD onto the computer, but this is not the case as there is no gap on iTunes.
Any help would be muchly appriecated!

Change your user ID to something less likely to annoy regulars on this forum who try and help those who want to be helped.
(I bookmarked this question when you first posted it, simply because I suspected that no one would offer help. I guess I was right.)

Homepage verizon yahoo has small size and print but ok with other browsers and other web sites ok

The home page comes up reduced size with small print.Can not get it to change with minimize-maximize clicking.Works okay with other browsers. All other web pages ok including email.Using windows 7

The Maximize/Restore button only changes the size of the Firefox window, not that of content on web pages.
You may have accidentally zoomed out on that site, or the site may simply have smaller text than others.
# To reset the zoom level, hold down the '''Ctrl''' key on your keyboard, then press '''0''' (the zero key).
# To increase the zoom level, either hold down '''Ctrl''' and use the mouse wheel, or hold down '''Ctrl''' and press '''+'''
For details, see the following article:
* [[Font size and zoom - increase the size of web pages]]

Please, I am an ipad mini user and my husband has been subscribing and reading magazines in my ipad. He now wants to get his own ipad but wants to know if his magazines would be accessed in his ipad.

Can my husband access the subscriptions be bought in my ipad if he eventually buys his own?

That depends on how you handle having multiple devices. Will you both have separate Apple IDs and separate user accounts on the computer, for example.
How to use multiple iPhone, iPad, or iPod devices with one computer
Using More than One iDevice on the Same Computer
This applies mainly to couples who are adding another device and do not want their email, messages, etc. being duplicated on both devices. To begin read: How to use multiple iPhone, iPad, or iPod devices with one computer. You need to establish a separate Apple ID and password for whomever will use the new iDevice. See Apple - My Apple ID and Frequently asked questions about Apple ID. The easiest way is to do this on the computer using iTunes: iTunes- How to set up an Apple ID within iTunes.
On the computer create a new user account for the person with the new iDevice. This will be the user account that person will always use. He/She will no longer use the other user account. This way that person will have a separate iTunes Library
Start by transferring the new device(s) to a new account along with all your data. Save any photo stream photos that you want to keep to your camera roll (unless they are already in the camera roll) by opening your Photos app, tap on Albums icon at the bottom. Now, tap on My Photo Stream album; tap Select; tap on the photos you want to select;, tap the share icon (box with upward facing arrow) in the lower left corner; then tap Save to Camera Roll.
If you are syncing notes with iCloud that you want to keep then you need to open each of your notes and email them to yourself. Later you can copy and paste the text into new notes created in your new account.
Tap on Settings > iCloud > Delete Account (only deletes it from this device, not from iCloud; the person keeping the current account will not be affected,) provide the password to turn off Find My Phone and choose Keep on My iDevice when prompted. Sign in with a different Apple ID to create your new account. Choose Merge to upload your data.
Once you are on separate accounts, you can each go to icloud.com and delete the other person's data from your account.
Note: The essence of the above was created by user, randers4. I
have made substantial changes to improve readability and syntax.

Smalls vibrations and smalls electrics chocs... What is it??

My computer has small vibrations and gives me (sometimes) small electric chocs... what should I do? What is it??

AASP's Outside of the USA
User Groups

HP dv6-2140 ed. Gap between plastic frame and screen

Hi!
I have bought my HP laptop 20 days ago and have noticed that the plastic frame around the screen is firmly attached on it at the bottom and sides, but not at the top of it (where the webcam is). Whenever I move the screen towards me, a 3mm gap between the plastic frame and the screen appears. Is this a problem or a factory characteristic of all HPs?
Thank you in advance for your help!

wait a second...it may just not be bolted down correctly. All display panels are the same thickness and the plastic casing has to snap tight around it. I could see the plastic casing just coming unsnapped. If you are not handy you may need to send it in for service but if all it takes is snapping the display casing down you could do that without affecting the warranty. .

Two days before my iphone 5 battery was expand and display screen came out and now there has some gap between frame and display.so how it will happen and i already got before months.now i need to backup all the data to icloud before through out.

two days before my iphone 5 battery was expand and display screen came out and now there has some gap between frame and display.so how it will happen and i already got before months.now i need to backup all the data to icloud before through out.
https://www.dropbox.com/home/iphone
https://www.dropbox.com/home/iphonehttps://www.dropbox.com/home/iphone

Make an appointment at the genius bar of your local Apple Store. The phone has a 1 year warranty. If it's no longer under warranty, a replacement is $269.

A Small Gap between the bottom of dispaly and the panel

Hai everybody,
It's been almost a week since i purchased the z1.As far i see it, its a good all rounder.
today i noticed that there is a small gap between the Display and the metal frame on the lower bottom (Front of phone) .
And dust also is gettin acumulated inside it , i wanna know if this is a manufacturing defect or is it provided to gve sm kinda shock resistance on impact while falling..
I have noticed some other Z1s also with sme kind of gaps.
It will be helpfull if somebody has noticed this, wanna know if this is a manufacturing fault or not !!
Peace out

Hai there , jus came back from sony service center. They said the gap is not a manufacturing fault, all z1s have a small gap of 0.05mm yo 0.025mm, the gap is provided to help service personals to remove the panel (using tools) in case of any fault .
Peace out

Error message: ni: A frame has been dropped and the acqusition has been canceled

I use a NI PCIe 1433 framegrabber with a Basler spl4096-140km line camera.
Using triggered acqusition with an external source, I can get a framerate of 68500Hz in NI-MAX.
When I use the Matlab image acquisiton toolbox to acquire data, I however very often get the error message: 'ni: A frame has been dropped and the acqusition has been canceled". This happens even at much lower framerates (20kHz) and only seems to go away when acquiring data slowly.
Computer is a Dell Precision 7600 and I assume there should be no issues with RAM or the PC being slow. The error does not go away when reducing the data size (i.e. reducing the ROI to one single point that is readout).
Do you have any pointers why this error message appears and what can be done about it?
Thank you!
Reto

Hello,
I encountered the same problem and I think it is because the allowcation of storage in matlab cannot catch up with that of the camera so that it will drop frames when the buffer is full.
I also want to know how to solve that.
Yang

I had my iphone 4s synced to itunes on my work laptop. The IT group at work stripped out that installation and will not allow me to reinstall. My iphone insists it has to sync to my work laptop itunes. How do I change iphone settings to look at an itunes

I had my iphone 4s synced to itunes on my work laptop. The IT group at work stripped out that installation and will not allow me to reinstall. My iphone insists it has to sync to my work laptop itunes. How do I change iphone settings to look at an itunes installation on my personal laptop?

dcotejr wrote:
I had my iphone 4s synced to itunes on my work laptop. ... How do I change iphone settings to look at an itunes installation on my personal laptop?
You cannot.
By Design the iPhone can Only Sync to One iTunes Library at a time.

Strange IMAQ Error Message: "ni: A frame has been dropped and the acquisition has been canceled."

Hello,
I am getting a strange error trying to use the NI PCIe-1427 with the MATLAB image acquisition toolbox configured with continuous acquisition. After about 5 minutes of acquisition, I get the error below:
??? ni: A frame has been dropped and the acquisition has been canceled.
Does anyone have any clues as to why I am getting this error / where I can find out what causes it? I need to acquire several hours worth of data and this error completely aborts my acquisition.
--Y

Hello,
Turns out that I found the problem. I had a slow memory allocation in my MATLAB code and this delay allowed too many frames to be accumulated in memory. I still do not know the source of the exact text of the error, but upon removing the slow memory allocation the error no longer occurs. I believe that it may have resulted from a buffer overrun of some sort in the underlying driver.
Given that this no longer poses a problem for me, I will not pursue it further.
Thank you for your help!

My iPhone4s has been stolen,and it has been repaired in somewhere!Once the stealer had a new iPhone,I couldnot have my iPhone forever!what should I do?I am inChina,I have call police.But police seem to see it small.please help me,it has been my second los

My iPhone4s has been stolen，and it has been repaired in somewhere！Once the stealer had a new iPhone，I couldnot have my iPhone forever！what should I do？I am inChina，I have call police.But police seem to see it small.please help me，it has been my second lost iPhone4s

There is nothing to do. You have done all you can.
Buy a new iphone.
Buy a different phone.
Do without a phone.

When i Place a PSD in Indesign it comes in at 200+% while the image frame is considerably smaller. How do i place so that the image and image frame match?

When i Place a PSD in Indesign it comes in at 200+% while the image frame is considerably smaller. How do i place so that the image and image frame match?

Peter,
The screenshots tell you everything.
The second one tells you how the image frame is automatically set up after a one-click place. It's the blue stroked rectangle with the eight control points at each corner and mid-way along the line. This image frame is generated at a proportionally correct height and width for the image it contains.
Now, if you look at the third screenshot (click on it to see it at a larger size), you will see I've used the direct selection tool (white arrow) to click on the image within the image frame. This CLEARLY shows the image (within the image frame) is substantially larger than the frame generated to contain it. This is indicated by the yellow stroked rectangle with the eight control points at each corner and mid-way along the line.
Notice that the blue and yellow rectangles are vastly different sizes.
In InDesign CS5.5, when i clicked to place the image, the image would fit perfectly within its image frame. the blue and yellow rectangles would match.
I had no need to go click on the proportional fill and centre buttons like i need to do now in CC.
I have a keyboard shortcut to place. I can't do File > Place for the amount of images i need to place.
So to reiterate: How do i place an image so that the image and image frame match?

MSOutlook HTML newsletter issues - large gaps between large images and small gaps...

Please can you help me!
Searched the web & found plently of advice but still getting formatting display issue when viewing HTML newsletter in MS Outlook.
Fully aware on the basics regarding the multiple issues when creating HTML newsletters but this is driving me crazy.
Apparently there is a image height limit within Outlook (can't find out what this is) so I have sliced my larger images into 5/6 parts which solves the display issue in Outlook.
But the gaps between the slices are now being displayed as small blank spaces within Hotmail.
I did use <br> between each slice as without caused the fixed 600px wide containing table to expand due to the slices stacking hoz.
Also still getting small gaps (like <br> spaces) between all images in Outlook when displaying perfectly (no gaps) in a browser.
This is my newsletter displaying correctly via a browser:
http://eu.shorts.tv/site-admin/modules/mod_mail/SHORTSTV_DECEMBER_2012.htm
Using Dreamweaver 4 (do have the latest version via Adobe Creative Cloud Membership but not on this system).
Hope you can help
Many thanks

Many thanks David
I also found this article which is currently sitting on my desk.
Pdf would make perfect sense or even a url link to view via a browser but these guys need it contained within the email.
Thanks again for your kind advice.
Regards
ShortsTV
Date: Fri, 30 Nov 2012 18:05:08 -0700
From: [email protected]
To: [email protected]
Subject: MSOutlook HTML newsletter issues - large gaps between large images and small gaps...
    Re: MSOutlook HTML newsletter issues - large gaps between large images and small gaps...
    created by David__B in Adobe Creative Cloud - View the full discussion
Hey Shortstv, Not something I know much about, searched and found thishttp://robcubbon.com/create-html-email-newsletters-outlook/ Maybe create it as a PDF attachment instead? -Dave
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4888255#4888255
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4888255#4888255
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4888255#4888255. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Creative Cloud by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Plastic frame/strip has small gap and a little loose on iPad 2

Similar Messages

Maybe you are looking for