Plastic Hinge Problem at the Back

Hello,
I recently got my brand MacBook Pro with retina display 15-inch mid-2014 model, and I just realized that the plastic hinge that go across the back slightly springs when pushed. It's moe towards the center part. Also I noticed that I springs when I push the same part that is in front of the screen right below it.
Is this normal, is this need to be fixed?

Thanks for the link, I think it helped.
I don't think my hinge is cracked or anything like that, just that the middle part springs a little bit.
I just talked to Apple support and they are suggesting me to take it in for Apple Genius bar, and saying that the screw might not been fully tied.

Similar Messages

  • Plastic Hinge Cover on the Back

    Good day everyone,
    I would like to know can this piece on my MacBook Pro 15 be replaced? I have had it less than a year and it is cracked.  I recieved my computer from school, Full Sail University.  Can any one help me?  It's the plastic strip located on the back over the hinges.
    Sincerely,
    Latre' Morris

    Probably not. Take it in for a free diagnosis and warranty repair.

  • Problem with the back camera in iPhone 4 (Black Shadow)

    Hi, I have a problem with the back camera. When turned on I can see a black shadow on one side and when I take the photo, appears in all the photos.
    I searched on the Internet to resolve this problem but I haven't been successful. A friend told me that maybe it is dirt that was introduced into the cover but I don't think It's true.
    The iPhone haven't dropped me for some quite time and don't crashing.
    Look here is a photo to show you how the black shadow looks like:
    Please, anyone know what the problem can be?

    It certainly does work.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • How can I back up ipad on icloud? Keep getting message "There was a problem completing the back up. Please try again later." I have, many times! The trouble shooting info does not resolve the problem.

    How can I back up ipad on icloud? I keep getting the message "There was a problem completing the back up. Please try again later." I have done so MANY times! I've followed the instructions ( I believe!) and the trouble shooting info does not resolve the problem. Can you please help?

    I had this exact same problem because the router i had in my house was having interference issues and the speed was too slow to do it.
    I would download a speedtest app on your iPad and see how fast your internet is.  I think the app is called speedtest in fact.

  • Ipad 2 wifi   3g has problem in the back camera whats the solution plz

    ipad 2 wifi + 3g has problem in the back camera whats the solution plz

    Skype is working very well on the Ipad but the camera doesn't!! When i go on "camera" icon, my screen stay like that
    I canno't take any picture or any movie....

  • Problem with the back button in the Alv ouput

    i have  refresh button in output of my alv report when i click on this it is getting refreshed ,now the problem is with the back button after refresh whn i click on back button it is not going to selection screen , i have to  click  the back button thrice  to come out to the selection screen ,if have refreshed  the ouput  screen twice .
    if i dont refresh the back button is working fine , So i have used "call to selection screen 1000" it coming  to selection screen without any problem  but in selection screen on clicking on back button it is again going back to output screen ,So please suggest what has to be done here .

    Hi Brahmananda,
    Please try to understand the flow of program and the screen navigation
    the click of BACK button triggers PAI and (to the best of my knowledge) you might have called the ALV screen number without any checks ( may be) so it is again taking to the ALV.
    try using
    in PAI
    module exit at exit-command
    in program
    module exit
    case ok_code
    when 'BACK'.
    LEAVE PROGRAM ( or any thing that you want it to be )
    endcase
    endmodule
    regards
    Ramchander rao.K

  • Problem activating the back and exit button with the ALV using OO

    I have wrote my first alv using Methods.My problem is that i can't activete the BACK and  EXIT button in the standart toolbar .
    Look my code please .....
    Without PF-STATUS can i do it ?
    *& Report  YDP_DOUBLE_ALV
    REPORT  YDP_DOUBLE_ALV.
    TABLES : YQM_CERT , MARA , YOUTPUT_APPL.
    DATA : ALV_GRID TYPE REF TO CL_GUI_ALV_GRID,
           CUSTOM_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
           FIELD_CAT TYPE LVC_T_FCAT,
           LAYOUT TYPE LVC_S_LAYO.
    DATA : ALV_GRID2 TYPE REF TO CL_GUI_ALV_GRID,
           CUSTOM_CONTAINER2 TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
    *       FIELD_CAT TYPE LVC_T_FCAT,
    *       LAYOUT TYPE LVC_S_LAYO.
    DATA: DYNNR TYPE SY-DYNNR,
          REPID TYPE SY-REPID.
    DATA: OK_CODE TYPE SY-UCOMM.
    DATA : BEGIN OF ITAB OCCURS 0.
            INCLUDE STRUCTURE YQM_CERT.
    DATA   END OF ITAB.
    DATA : BEGIN OF ITAB1 OCCURS 0.
            INCLUDE STRUCTURE YOUTPUT_APPL.
    DATA   END OF ITAB1.
    *  MODULE DISPLAY_ALV OUTPUT
    MODULE DISPLAY_ALV OUTPUT.
      SET PF-STATUS 'ZST9'.
      PERFORM DISPLAY_ALV.
    ENDMODULE.                    "DISPLAY_ALV OUTPUT
                       "DISPLAY_ALV OUTPUT
    *& Module USER_COMMAND_0100 INPUT
    * text
    MODULE USER_COMMAND_0100 INPUT.
      CASE OK_CODE.
        WHEN 'BACK'.
          LEAVE TO SCREEN 0.
        WHEN 'EXIT'.
          LEAVE PROGRAM.
      ENDCASE.
    ENDMODULE. " USER_COMMAND_0100 INPUT
    START-OF-SELECTION.
      LAYOUT-ZEBRA = 'X'.
      LAYOUT-GRID_TITLE = 'YQM_CERT'.
      LAYOUT-CWIDTH_OPT = 'X'.
      LAYOUT-SMALLTITLE = 'X'.
      SELECT  * FROM  YQM_CERT INTO ITAB.
        APPEND ITAB.
      ENDSELECT.
      SELECT  * FROM  YOUTPUT_APPL INTO ITAB1.
        APPEND ITAB1.
      ENDSELECT.
      CALL SCREEN 100.
    END-OF-SELECTION.
    *&      Form  DISPLAY_ALV
    *       text
    FORM DISPLAY_ALV.
      IF ALV_GRID IS INITIAL.
        CREATE OBJECT CUSTOM_CONTAINER
          EXPORTING
    *      PARENT                      =
            CONTAINER_NAME              = 'CC_ALV'
    *       style                        =
    *      LIFETIME                    = lifetime_default
          REPID                       = REPID
          DYNNR                       = DYNNR
    *      NO_AUTODEF_PROGID_DYNNR     =
    *    EXCEPTIONS
    *      CNTL_ERROR                  = 1
    *      CNTL_SYSTEM_ERROR           = 2
    *      CREATE_ERROR                = 3
    *      LIFETIME_ERROR              = 4
    *      LIFETIME_DYNPRO_DYNPRO_LINK = 5
    *      others                      = 6
        IF SY-SUBRC <> 0.
    *   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
        CREATE OBJECT ALV_GRID
          EXPORTING
    *    I_SHELLSTYLE      = 0
    *    I_LIFETIME        =
            I_PARENT          = CUSTOM_CONTAINER
    *    I_APPL_EVENTS     = space
    *    I_PARENTDBG       =
    *    I_APPLOGPARENT    =
    *    I_GRAPHICSPARENT  =
    *    I_NAME            =
    *    I_FCAT_COMPLETE   = SPACE
    *  EXCEPTIONS
    *    ERROR_CNTL_CREATE = 1
    *    ERROR_CNTL_INIT   = 2
    *    ERROR_CNTL_LINK   = 3
    *    ERROR_DP_CREATE   = 4
    *    others            = 5
        IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
        CALL METHOD ALV_GRID->SET_TABLE_FOR_FIRST_DISPLAY
          EXPORTING
    *      I_BUFFER_ACTIVE               =
    *      I_BYPASSING_BUFFER            =
    *      I_CONSISTENCY_CHECK           =
             I_STRUCTURE_NAME              = 'YQM_CERT'
    *      IS_VARIANT                    =
    *      I_SAVE                        =
    *      I_DEFAULT                     = 'X'
           IS_LAYOUT                     = LAYOUT
    *      IS_PRINT                      =
    *      IT_SPECIAL_GROUPS             =
    *      IT_TOOLBAR_EXCLUDING          =
    *      IT_HYPERLINK                  =
    *      IT_ALV_GRAPHICS               =
    *      IT_EXCEPT_QINFO               =
    *      IR_SALV_ADAPTER               =
          CHANGING
            IT_OUTTAB                     = ITAB[]
    *      IT_FIELDCATALOG               =
    *      IT_SORT                       =
    *      IT_FILTER                     =
    *    EXCEPTIONS
    *      INVALID_PARAMETER_COMBINATION = 1
    *      PROGRAM_ERROR                 = 2
    *      TOO_MANY_LINES                = 3
    *      others                        = 4
        IF SY-SUBRC <> 0.
    *   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
      ELSE.
        CALL METHOD ALV_GRID->REFRESH_TABLE_DISPLAY
    *       EXPORTING
    *         IS_STABLE      =
    *         I_SOFT_REFRESH =
    *       EXCEPTIONS
    *         FINISHED       = 1
    *         others         = 2
        IF SY-SUBRC <> 0.
    *      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
      ENDIF.
    ENDFORM.                    "DISPLAY_ALV

    Hi
    U need  to active them in your status ZST9.
    Max

  • Hinge Problem with the 13inch Rmbp

    hey guys so I have the rmbp 2014 13inch model. Im not sure but i feel like the screen is loose cause i find it to be very light while lifting it and if i take my computer and shake back and forth rapidly (like really fast )the screen moves a bit is that normal? Otherwise while Im typing or anything the screen doesn't wobble at all and if i touch the screen lightly it shakes a  little but thats barely anything so am I being OCD about it or is there something wrong? Moreover I'm scared it will become looser overtime causing more trouble?

    Hi @joky ,
    I have sent you a private message. If you are not sure how to check your private messages then this post has instructions that will guide you through the process.
    Regards,
    George
    I work for HP

  • Plastic Hinge cracked

    The plastic hinge that connects the screen from the keyboard is cracked badly. I'm just a few months off warranty (i'm sure its been cracked for some time, just noticed it). Anyone else have this problem, if so any idea how much to fix it?

    Vizon wrote:
    The plastic hinge that connects the screen from the keyboard is cracked badly. I'm just a few months off warranty (i'm sure its been cracked for some time, just noticed it). Anyone else have this problem, if so any idea how much to fix it?
    I doubt you'll be able to convince them that it's a warranty issue, but if you're nice, you might get lucky. Or it might be a known issue.
    But go now. And expect that your MBP will be shipped out for a week or so.

  • The "back" button on my ipod touch won't work?

    problem with the back button on my ipod touch

    What "back" button? Ther is the Power button on the upper dege, right side and the Home button on the front, bottom center.
    If you mean the Home button:
    Try:
    http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Why the back of my camera iphone 5 is no longer the focus?

    She doesnt word and my iphone is always protected by a cover, i buy my iphone5  1 year ago. Except this problem with the back camera focus, hé works perfectly

    Did you tap to focus?
    Do a
    Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

  • Ff22 has two top bars, both of which act simultaneously in the identical way. Furthermore, the BACK button doesn't light up on many web pages. That means I cann

    Problem #1.
    The first top bar has a firefox logo at upper left corner and the words "Ask a Question/Mozilla Support-Mozilla Firefox" are on the logo's right side. The first top bar has minimize, overlap and close buttons at the upper right corner. When I click on the logo, a short menu drops from it, which has choices like "restore"..."close".
    The second top bar has the word "Firefox" at the upper left corner with a downward arrow beside it. They look like white letters contrast to the orange background of a huge button. When I click on it, a double paned menu shows up. It has many choices such as new tab, new private window...bookmarks, history, download...exit. The second top bar also has minimize, overlap and close buttons at the upper right corner, too. There are 7 word titles "file, edit, view, history, bookmarks, tools and help" below that huge orange button at the upper left corner. The logos and the address bar are below the 7 words.
    I don't need 2 top bars. They occupy too much screen property.
    Problem #2
    The BACK button doesn't light up and cannot work on many web pages.
    Thank you

    It sounds like there is either an application or an extension of Firefox that is causing this problem.
    You can launch Firefox in Safe mode to try and identify problems: http://mzl.la/MwuO4X
    Also, this article might be of interest to you: http://mzl.la/NjT73w
    Additionally, you can try and do a soft reset of Firefox if you are not able to solve this problem: http://mzl.la/MnSTZB

  • Hi everyone, I have a  4s which I love to bits, but I am having problem with the camera it works fine with no flash but as soon as flash is turned on it does go like a white blurry dark picture, I have warranty till end of feb but no box am I covered stil

    Please if any one can help be grateful

    Take the plastic protective sheet off the back of the iPhone.
    The plastic is diffusing the flash so that it shines directly back into the lens washing out the picture.
    Also if you have not removed the plastic protective sheet from the front, you want to do that as well, since the front sheet covers the microphone as ear speaker making it difficult to hear.
    All of this happened to my wife :)

  • TX2000 plastic swivel hinge problem

    Hey,
    So I have  HUGE problem with my swivel hinge. It seems that whatever connective plastic attached the screen to the hinge snapped.
    Just to be clear, this is not a problem of the screen "wobbling", it simply no longer stays up. My warranty is over so I really want to know if there's another way of fixing it with low cost and quick because I have to go back to college in less than 2 weeks.

    Thanks for the link, I think it helped.
    I don't think my hinge is cracked or anything like that, just that the middle part springs a little bit.
    I just talked to Apple support and they are suggesting me to take it in for Apple Genius bar, and saying that the screw might not been fully tied.

  • I can not get Time Machine to back up an external WD Passport 2 TB drive!  Has anyone else had this problem?  The drive is new and I was running Snow Leopard and upgraded to Lion and it still won't do it.  Time Machine backs up the internal drive fine.

    I bought 2 2TB WD Passport Drives with the intention of housing my iTunes/iPhoto libraries off my older MacBook.  I have successfully transferred the Libraries to one and am using the other one for Time Machine.  In Snow Leopard I could back up my computer to Time Machine no problem but when I did not exclude the iTunes/iPhoto drive the back up fails.  Both drives have been reformatted, permissions repaired and checked in Disk Utility and one was replaced.  I have been to the Genius Bar now 5 times.  I have tried using USB drive and FireWire.  Both drives are recognized and are working properly otherwise regardless how they are connected.  Finally yesterday the Apple store installed Lion to see if that fixed the issue and it did not.  Time Machine successfully backed up a USB Flash drive, and today I will try an older external drive.  Any ideas on what else to try??? Do I have to resort to third party software like Carbon Copy Cloned to get this done?  Any ideas why this wont work?  I am using a FireWire converter but as I said, both drives are working normally otherwise (libraries working, time machine working for the computer's hard drive.  Any ideas would be appreciated!!?

    Thanks so much but none of that helped.  It was driving me crazy because it would back up another external drive.  I just changed the name of the drive from iPhoto/iTunes Library to Media Libraries and IT WORKED!! I guess for some reason it didn't like the drive being called iPhoto or iTunes ???? I don't understand but I have tried so many solutions and exchanging things out but the name change did it????!!!
    Thank you for your help and replying to this.  Guess I made my own issue!

Maybe you are looking for