Plastic Surgery Before and Afters... best program?

Hi guys,
I am brand new to graphic designing or anything related to it!
I'm currently looking to do side by side before and after pictures for my office. Sometimes the pictures differ in color or contrast or need to be cropped. Sometimes a patient requests that their eyes or a tattoo be hidden (with black bars).
What program(s) would you guys suggest? Photoshop? Illustrator? Other programs??
I just got a brand new Mac so please help me!
PS. PSdesigner= plastic surgery designer

Be aware that a there is a difference between a video that consists of a slideshow, and what DVDs consider a slideshow.
If you want a DVD slideshow, then I suggest taking a look at one of the Lord of the Rings Extended Release DVDs. On the two extra discs with each movie there are plenty of DVD slideshows. With a DVD slideshow you can go forward or back through the slideshow. You can stay on any slide as long as you like. A slide can contain audio. Audio cannot carry over from one slide to another. There is no transitions from one slide to another.
What I suspect is that you want a video that acts like a slideshow. In that case, do not use the slideshows in DVD SP at all. Create your video outside of DVD SP, then just place it in a Track and treat it as any other video.
That being said, do you want a lot of control over how the video slideshow is created, or do you want a program that will do most of the work for you at the expense of not having absolute control over how things are put together? If you want full control then create your video slideshow in FCP/Motion. If you want a program that will do a lot of the work for you, then you should look into iPhoto. It can create some pretty spectacular slideshows very easily, but you will not have the full control you have with FCP.

Similar Messages

What is the best app for before and after photos for my Mac?

I am looking for a program or app for my mac so i can put pictures up side by side.... like before and after photos. Any suggestions?

best cheap solutions.
acorn
https://itunes.apple.com/us/app/acorn-4-image-editor-for-humans/id634108295?mt=1 2
pixelmator
http://www.pixelmator.com/
Fotor (my fave) and FREE
https://itunes.apple.com/us/app/fotor-photo-editor/id503039729?mt=12
FXphoto studio
https://itunes.apple.com/us/app/fx-photo-studio-pro-effects/id312506856?mt=8

Any existing program to list before and after BDC error?

Looking for a way to report any BDC errors and show before and after its been corrected.

Hi,
Before making correction:-->
!. If you are using call transaction , then you can all errors in BDCMSGCOLL internal table
and use fm MESSAGE_PREPARE to generate message texts
2. If you are using session method then you have error log SM35.
After making coorection i don't think you have anyway to capture corrected errors
a®

Everyone: This time repair your permissions before and after 10.4.8 update

Hello All,
Just a reminder for all those who are updating to OS 10.4.8.
While many people do ignore all the recommendations that we provide and still come through fine, please do consider observing the following to minimize your problems.
To insure the best chance of success, please consider downloading the Combo Updater for your computer instead of using Software update.
For PowerPC Mac's, this would be:
http://www.apple.com/support/downloads/macosx1048comboupdateppc.html
For Intel Macs, this would be:
http://www.apple.com/support/downloads/macosx1048comboupdateintel.html
The benefit of using the Combo Updater, is that it replaces all system files that have been changed since the last major release (in this case since 10.4.0).
So, if you have any system files that have become corrupted, the Combo Updater will very likely over-write those, and spare you the headaches that come from updating an operating system that has problems that just haven't come to the surface yet.
In many cases, you can have problems that have not come to the surface, and the "Delta" or Software update method will bring them out to bite you. The reason for this, is because the Delta / Software Update version only changes files that have changed since 10.4.7. And, it works more in a "patch" fashion. So, if there is a problem in one of the files being patched, then the update will cause you some major headaches.
Going with the larger "Combo" update over-writes almost all the System files with clean versions instead of just making patches. So, it is frequently much more successful.
Now, with that said, before you update, you should make sure your permissions are all set properly. If your permissions are wrong, then your update will likely have trouble.
So, go into "Disk Utility" in the Applications --> Utilities folder and repair your permissions.
Start by selecting your hard drive on the left window of Disk Utility. Then, go down and click on the "Repair Permissions" button. Once it's completed, then exit Disk Utility.
Now, it is also extremely important to make sure all running programs are closed before you install any system update. So, go ahead and restart your computer.
Restarting will make sure that all programs are closed, and that nothing weird is stuck in memory before you install.
If you have anti-virus programs running, then disable or deactivate them first (you don't want them interpreting this as unauthorized modification or it might prevent certain files from being updated).
Now, with your computer freshly restarted, install the Combo updater you downloaded.
When prompted, click on the "Restart" button when prompted.
Now, the computer will startup, but sit at the spinning wheel for several minutes. It will eventually restart again on it's own. And, finally, it will start-up all the way and you'll be back at your desktop.
Now, immediately go back to Disk Utility and repair permissions as you did in the previous step. You will likely see several permissions that have been repaired. In my case, I had dozens of CoreAudio, Widgets, and other permissions that needed repair. Once permissions have been repaired, go ahead and restart one last time. This makes sure that everything is set and then cleaned-up.
Once it reboots, begin using it and enjoy.
Now, this may sound like a lot. But, it really is simple. It just reads like a lot of stuff.
And, of course, you are free to ignore this and just install it however you like. Many people have their own ideas here. And, many people say you don't have to do anything to prepare. But, for those that have had huge problems in the past, these extra steps will usually save you the major headaches that tons of people inevitably have with every new update.
Anyway, I hope this helps to save at least a few of you any problems. If you don't agree with the ideas above, just ignore it and do as you like.
But, if you want a little extra piece-of-mind and a better chance at success, then please consider exercising this extra caution.
And, for the record, I have updated my machines to 10.4.8 (within minutes of the update being available) and it is working perfectly smooth on my systems.
I hope you find this helpful.

mhunter, thanks and good that you take the time and effort again to remind everyone that it does take an effort to do a major OS update, to ensure maximum stability.
So far my 10.4.8 Update is a-okay, and I have had many trouble-free updates since installing 10.4
I too practice rigourously and "religiously" before and after an OS or Security Update, but I normally use Software Update, equally successful:
1. Before Startup, UNPLUG all external devices, left only keyboard, mouse and internet connection, unless they are all wireless.
2. Startup, disable NAV if any, Repair Disk Permission. Restart again, Repair Permission again.
3. Do Software Update
4. Restart, Repair Permission
5. Shutdown, plug everything back
6. Startup Mac, use Mac
So far these steps have been keeping all my macs both at home and at work very very stable and healthy.
Maybe, just maybe if everyone here, all mac users were to follow these steps, yes they can be a hassle, yes they can take up some time, but then there will be less less complains and "blasts" at Apple, just because perhaps themselves have been too careless or negligance in performing updates.
Cheers

How do I add a before and after transition to a standalone clip in the second or other than primary stack?

New to FCPX on a project this weekend. I have gotten reasonably comfortable with the basic features but one thing that I CANNOT figure out, is how (what used to be) selecting a track in the timeline to activate it to apply a transition. I need to select a video clip which stands alone in the stack which is positioned above the primary track and add a blend transition before and after the clip. I have set the opacity to blend with the images in the primary track below but the beginning and end of the clip in the second stack do not fall at the transition points in the lower track which should not matter anyway. I can’t find it in Help or the third party tutorials that I purchased and completed. Thanks for your help!

Tom gave you the answer. As a follow-on you can then use the Cross Dissolve transition on your newly converted connected clip. This transition will allow it to dissolve smoothly into the video below it. Note that the Fade to Black transition will take both that clip and the video below it to black which would probably be undesirable. Use Cross Dissolve instead. Best wishes.
stephen

What are Before and After Images ?

Hello Masters,
Best wishes to all.
For the past one week I've learnt many concepts from SDN, got all my doubts clarified.
On the same roll, I have one more question
What are Before and After Images ?
Where do we come across these terms ?
Could you please explain with an example ?
I always thank my replies in points
Thanks in advance...

Hai....
Before and After Images:
This Term is Used in the " Change Log "....
Change Log is one of the Table used in ODS....
That means the Changes in Running Request in ODS....
Example:
If you Enter the Request to " New Table" after activation the Request will be Deleted From the Table, You can see that in Change log......
Assign Points If It Halps....
BalajeeKannan

Before and after comparison in PSE 6

Can someone tell me how to do a comparison of an edited version to the original in PSE 6 for Mac? It's easy to do in quick edit but what about when editing in full edit?
Thanks!

I handle this in another way. I routinely duplicate the background layer, shut off the visibility of the background layer, and work on the background copy layer. Certain functions of the program don't work on the background layer anyway, and this obviates this constraint. Not everyone subscribes to this work flow, but that is ok,
I crop and establish resolution at this stage, as that pertains to all layers. However, I apply adjustment layers and other enhancements to the background copy layer.
In order to get before and after visualization, one can:
A. Shut off visibility of all the newly generated layers individually, and look at the original background layer
B. Merge all visible layers, and toggle between this package and the background layer. Note that I do not flatten at this stage.
C. Create stamp visible layer at the top of the stack (CRTL+SHIFT+ALT+E) and toggle using this.

When exporting XML files, I get forced line breaks before and after my xmltag

hi everybody,
as I said, i do a javascritp that exports xml files. First I clean up my text by removing every invisible characters with app.findpreferences. Nevertheless, my xml files is almost well formed beacause i got before and after each xmltag a forced line break. Somebody could explain to me why ?
I don't use prettyIndent and prettyPrinting .
Best regards
Américo Pinto

hi everybody,
as I said, i do a javascritp that exports xml files. First I clean up my text by removing every invisible characters with app.findpreferences. Nevertheless, my xml files is almost well formed beacause i got before and after each xmltag a forced line break. Somebody could explain to me why ?
I don't use prettyIndent and prettyPrinting .
Best regards
Américo Pinto

Comparing Before And After

I'd like to look at a before and after version of a picture once I've made an adjustment, but haven't been able to figure out how it's done.
Thanks.

If you want to compare different stages in a series
of adjustments, you have to remember to make a new
copy of the current version before doing the next
step in the series. (In that way it's just like a
word-processing program.) But the versions don't cost
you anything, to speak of, in the way of disk space.
The more info the better. Thanks very much.

M1522nf feeds one bland page before and after each printing.

My HP m1522nf will feed one bland page before and after each printing.

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Video "zooms" before and after transition

My video zooms a little before and after the cross dissolve transition. I tried deleting the render files and re-rendering but the noticeable zoom is still there.
Video is 1920x1080 60i prores @ 17.1mbps. Project is same settings, with field dominance set to none. I export to quicktime self contained. Video looks great except for the sudden zoom before and after the transition.
Any thoughts?

danwayfilms wrote:
Always Use Best Quality when rendering movies: unchecked
Not really sure this is the culprit but it should be checked.
Also, what is that field dominance thing? You said it was originally set to "none" but you're dealing with interlaced footage and upper field dominance.
mish

I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

Hi Crushed,
Numbers doesn't have pages. It has a canvas that holds objects such as tables and charts.
Drag the objects from the bottom of the canvas onto the white space above. That will reduce the number of "pages" (sheets of paper) that will print.
Regards,
Ian.

My ipod touch is stuck on the apple logo and after a while a white screen comes up and it restarts and the same thing all over agan. this happened to me before and after a while it turns on but why does it keep on doing this?

my ipod touch is stuck on the apple logo and after a while a white screen comes up and it restarts and the same thing all over agan. this happened to me before and after a while it turns on but why does it keep on doing this?

Try connecting the iPod Touch to your computer and restore it. http://support.apple.com/kb/HT1414

GREP: How can I place a (for example) "*" before and after bold text with GREP?

Hi there.
I have a string of text as such:
I want to use GREP to insert a "*" (asterisk) before and after each bold part. Can I do that with GREP?
(if asterisk is a problem, I can use a different character)
Any help would be appreciated.

Hi Schmaltzkopf,
try this:
Have fun

Hi, Just switched from CS6 to PS CC. I am used to using ACR in CS6 with it's preview checkbox in the upper right-hand corner. I do not see that checkbox in PS CC. I see that they have added side-by-side, right and left and top and bottom before and after

Hi,
Just switched from CS6 to PS CC. I am very comfortable using ACR in previous versions. I liked to use the preview checkbox located in the upper right-hand corner to see before and afters. That checkbox is no longer in my version of PS CC. I see that they have side-by-side, top and bottom and right and left before and after options in the lower right-hand corner in this version. Is there anyway to get that legacy preview checkbox back so that I can use it?

Hi Warunicorn,
Thank you very much. I just could not find it on my own. I will have more questions as I get into it.
Jim

Plastic Surgery Before and Afters... best program?

Similar Messages

Maybe you are looking for