%PLATFORM_ENV-1-FRU_PS_ACCESS: FRU Power Supply is not responding on 2960XR Switches? what

Hi all,
my customer has a lot of WS-C2960XR-24PS-I (15.0(2)EX4) 24 and 48 Port switches, some are in a stacks, others not. All have 2 Powersupplies.(each 640 Watt)
Now he notice this message every 5 minutes, but not on all switches.
Looking at the switch, the PS seems to be ok.
There is a known issue, but this one only mention the problem during insertion, not during normal runningtime.
What can be the problem here?
Thanks
Willem
Additional Information:
CustomerSwitch#
Nov 27 09:28:44.622 CEST: %PLATFORM_ENV-1-FRU_PS_ACCESS: FRU Power Supply is not responding
CustomerSwitch#
Nov 27 09:33:44.642 CEST: %PLATFORM_ENV-1-FRU_PS_ACCESS: FRU Power Supply is not responding
CustomerSwitch#
CustomerSwitch#
CustomerSwitch#sh env all
FAN PS-1 is OK
FAN PS-2 is OK
SYSTEM TEMPERATURE is OK
System Temperature Value: 41 Degree Celsius
System Temperature State: GREEN
Yellow Threshold : 67 Degree Celsius
Red Threshold : 75 Degree Celsius
POWER SUPPLY 1A TEMPERATURE: OK
POWER SUPPLY 1B TEMPERATURE: OK
SW PID Serial# Status Sys Pwr PoE Pwr Watts
1A PWR-C2-640WAC DCB1728B1K2 OK Good Good 250/390
1B PWR-C2-640WAC DCB1738B2A1 OK Good Good 250/390
CustomerSwitch#
--- ende -------
Release Notes for Catalyst 2960-X and 2960-XR Series Switches, Cisco IOS Release 15.0(2)EX5
---SNIP---
CSCuh65397
During the insertion or removal of a power supply, the following message might be displayed on the console:
%PLATFORM_ENV-1-FRU_PS_ACCESS: FRU Power Supply is not responding
There is no functional impact. There is no workaround.
---SNIP---

Hi ,
As per the Bug note, (see the Further Problem Description:)
Workaround:
NA
Further Problem Description:
If this log is repeated even after OIR, It should be different issue. It has to be debugged separately
Thanks,
VS.Suresh

Similar Messages

%PLATFORM_ENV-1-PWR_RPS: Redundant power supply faulty or in standby mode

Hi All,
We are getting the below error on our Cisco 3560 Switch and the device is running on the image ":c3560-ipservicesk9-mz.122-55.SE4.bin".
010790: Mar 2 00:19:35 PDT: %PLATFORM_ENV-1-PWR_RPS: Redundant power supply faulty or in standby mode
010791: Mar 2 00:24:35 PDT: %PLATFORM_ENV-1-PWR_RPS: Redundant power supply faulty or in standby mode
010792: Mar 2 00:29:35 PDT: %PLATFORM_ENV-1-PWR_RPS: Redundant power supply faulty or in standby mode
010793: Mar 2 00:34:35 PDT: %PLATFORM_ENV-1-PWR_RPS: Redundant power supply faulty or in standby mode
010794: Mar 2 00:39:36 PDT: %PLATFORM_ENV-1-PWR_RPS: Redundant power supply faulty or in standby mode
010795: Mar 2 00:44:36 PDT: %PLATFORM_ENV-1-PWR_RPS: Redundant power supply faulty or in standby mode
010796: Mar 2 00:49:37 PDT: %PLATFORM_ENV-1-PWR_RPS: Redundant power supply faulty or in standby mode
010797: Mar 2 00:54:37 PDT: %PLATFORM_ENV-1-PWR_RPS: Redundant power supply faulty or in standby mode
DCSW#sh env all
FAN is OK
TEMPERATURE is OK
SW PID Serial# Status Sys Pwr PoE Pwr Watts
1 Built-in Good
SW Status RPS Name RPS Serial# RPS Port#
1 Standby <>
Kindly help me on how to fix this issue and what to do next?

Hi Senthil,
What are the LED status on RPS. It looks like RPS may have gone faulty. How many switches are connected to it? Possibly a reset of RPS could fix this issue, else replace it.
Thanks,
M

Updated to IOS 8 and now power button does not respond and screen is frozen with apple logo.

Updated iPad to IOS 8 -- screen locked. Now screen is frozen with apple logo and the power button is not responding.
Thanks for any help!

That is normal while it is loading the update. Give it some time(shouldn't be more than 40 minutes). If not, hold the home & sleep/wake button until it is black, and then it restarts.

Ipod Touch 3g power Button Does not respond!

Greetings Friends...
power button is not responding... i had a JailBreak i don't know if has something to do whit the problem, I already Reset my Ipod and still does not work...
please Help....
:3

Jailbreaking can have unintended consequences,

My iPhone power button will not respond?

My Iphone 3g power button will not respond to when I touch it.

Sounds like there is a hardware problem with the button.

Hi: my mac air safari is not loading all websites since i upgraded my software.. it download only few website and crome in the mac is not responding at all.. what to do please advise ???

Hi: my mac air safari is not loading all websites since i upgraded my software.. it download only few website and crome in the mac is not responding at all.. what to do please advise ???

Safari Problems
Safari - Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
Try setting up another admin user account to see if the same problem continues. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About

The home button for my ipod touch 4th generation does not respond all the time, What do I do?

The home button for my ipod touch 4th generation does not respond all the time, What do I do?

Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

HT1555 My Apple TV wasn't working so I returned it. I kept the same remote from my previous Apple TV and it's not responding to it. What should I do?

My Apple TV wasn't working so I returned it. I kept the same remote from my previous Apple TV and it's not responding to it. What should I do?

Don't you have 2 Apple remotes now?
Either way, hold menu and down key together for 6 secs and that should fix it unless the remote is broken or battery is flat.
AC

HT1414 My ipad has locked-up, it has frozen while running an app, and will not respond to any button, what do I do?

My ipad has locked-up, it has frozen while running an app, and will not respond to any button, what do I do?
It simply stays on the same screen image, and does not respond to anything. When I plug it into itunes, there is no indication of its presence.
The ipad's clock has also stopped.
eek

Try a reset:
Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

PLEASE HELP ME!!! ipod touch 3rd gen 32 gb ios 5 sreen not responding to touch! What can i do ?

My ipod touch battery ran out and i went to charge it using a wall adapter. it turn on got stuck in a boot loop for 15 min before going to the lock screen. after that, the screen is not responding to my touch what can i do?

- First try resetting hte iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Next connect to your computer and restore from backup
- Then try restoring to factory defaults/new iPod.

G580- Screen blacks out when power supply is not plugged in to the laptop

My laptop is just 3 months old and I am already having problems with it.
The laptop screen blacks out when i remove the power supply from it.
When plugged in , it starts workin again.
Whats the point of a laptop if i am not able to use it without plugging in??
I don kno what the probelm is. Can anyone help here pls...
Cheers
Vaish

Hi Vaish,
I’d like to help you with this issue as we can try to increase the Brightness of the screen from the power options while plugged in,
And then please if still the same we can try to uninstall the Lenovo Energy management and reinstall it back:
Lenovo Energy Management for Microsoft Windows 8
Lenovo Energy Management for Microsoft Windows 7
Hope the information helps. Let us know.
Regards
Soha
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Old power supply does not fit new MBP

I recently got a new MBP to replace a 2011 unit that went bad. The wife also have a 2007 MBP. Over the years I have accumulated four 85 watt power supplies with the magnetic catch. Magsafe I believe they call it.
I keep one on my desk at the office and one on the desk at my home. I don't even have to take the new one out of the bag.
Imagine my surprise when I tried to attach one of the old power supplies to my new 2014 MBP. It didn't fit. The new computer is thinner than the old ones and the mag connector is not as wide (or tall if you consider the angle it sits at).
After pondering the situation for a while and staring at the connectors, it dawned on me that the electrical connections and local area around them are identical. What is different is the thickness of the surrounding metal rim.
I took one of the old power supplies along with the new one out to my shop and milled .028" (28 thousandths, or 28 mils) off each side of the old connector. Voilá, it worked perfectly. The two modified units now are back in place on the two desks and my new power supply is safely tucked in my carrying bag for use when I am "out".

Should the trip to the shop prove to be tiring, you may get one of these instead:
http://store.apple.com/us/product/MD504ZM/A/magsafe-to-magsafe-2-converter
Ciao.

Power option settings not responding

HP e9237 c desktop running Windows 7 Home Premium.
Power settings for monitor and computer do not respond for sleep, hibernate or power off functions. Screen saver does not work using Windows version or third party ones. In addition, the auto play for the CD/DVD drives do not work. This started several months back and I have exhausted all tests that I know to do. Any help would be appreciated. Ted

Hello tevans9129,
What you seem to be referring to is a system recovery which will recover the system back to it's original state. However, if you use system restore this restores the computer back to a specific point in time. Say you know the computer worked January 1st. You can go into System Restore on your computer and tell it to restore your system back to how it was working on January 1st. The entire process shouldn't take more than an hour.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Power off button not responding

Power off switch not responding... Help!

Try to reset the device (try it even though as you said the power button (or sleep/wake switch) is not functioning)
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.
If the switch is indeed physically bad, you can get by in the meantime (or until you can get it evaluated/fixed) by using the the AssistiveTouch panel (this floats a virtual button on the screen that you can use to access various funtions of the iPad, one of them being the sleep/wake switch). I use this all the time, even though my buttons are just fine (cuts down on wear/tear on the physical buttons).
AssitiveTouch: Settings>General>Accessibility>AssistiveTouch (set to ON)

Power button is not responding

Hi,
Today I shut down my macbook and then I tried to turn it on but it seems the powerbutton is not working. I have tried all of the diff types of resets and the PMU... nothing seems to work. I am out of the country and can't go to a mac store. Is there another command that can bypass the power button, or is it possible to open up the computer and press the powerbutton a different way? Any help is great.
Jon

I have a white Macbook that has the same problem. Has been shutting down on its own for months, and then after putting it to sleep a few days ago, it will not power up. I tried all of the tricks to reset the power settings, and after speaking with Apple tech support, I most likely have a bad power module on the motherboard and it will need to be serviced. What seems to point to this problem is, after trying all of the other methods--resetting power settings, re-seating battery, etc.--the light on the mag safe cord is green. If the plug is not making good contact, the light probably won't turn on. If this is the case follow the instructions for cleaning the contacts. If it makes contact, but is charging the battery properly, it will turn amber. In my case, the light is green, but the battery is not getting charged, as indicated by the indicator button on the battery case. So one would think to remove the battery and run the computer using the power cord. The computer still did not respond, so that means no power is getting through due to the bad module.

%PLATFORM_ENV-1-FRU_PS_ACCESS: FRU Power Supply is not responding on 2960XR Switches? what

Similar Messages

Maybe you are looking for