Platform supported for ebiz contol center client?????

Hello,
I happened to read an article from bea website on BEA WEblogic Portal 4.0 review.
.There is a mention that in the current version of portal 4.0, ebiz control center
client is avaliable for windows 2000 systems only ??Is it true or is ebusiness control
center client available on other oprating systems ??

I have ebcc on linux. The main thing that you will have to change is the jvm. This
will probably void your warranty though :-). Basically, what we did here, was install
it on solaris. Move the whole thing to linux. Remove the ebcc jvm directory. Then,
make a soft link to the installed jdk.
-Travis
"Michel Bisson" <[email protected]> wrote:
Daniel,
Technically speaking you are right but we only tested (actually certified)
the platforms below. For instance, we have not tested/verified the scripts
for launching EBCC on all Unix platforms.
Michel.
"Daniel Selman" <[email protected]> wrote in message
news:[email protected]..
Michel,
But it is 100% Java... ;-)
Sincerely,
Daniel Selman
"Michel Bisson" <[email protected]> wrote in message
news:3cc59b18$[email protected]..
Sanjay,
EBCC is supported on Windows 2000, Windows NT 4.0, and Solaris 8.
The info is avalaible at:
http://edocs.bea.com/wlp/docs40/install/platforms.htm
Michel
"Sanjay Phadke" <[email protected]> wrote in message
news:3cc4ed40$[email protected]..
Hello,
I happened to read an article from bea website on BEA WEblogic Portal
4.0
review.
.There is a mention that in the current version of portal 4.0, ebizcontrol center
client is avaliable for windows 2000 systems only ??Is it true or
is
ebusiness control
center client available on other oprating systems ??

Similar Messages

Is there support for a data center Multi-Master using SunONE "Bandwidth Manager" over a WAN ?

I'm not sure what you mean by "data center M-M". There is currently only support for 2 masters. Do you mean
"Is there support for having a managed WAN connection between the two masters?"
This scenario has been tested, but I don't know if it is fully supported by iPlanet. In other words, it should work, but probably not as well as two masters sitting next to each other in a data center, which is the recommended deployment strategy.

Platform support for OMW

Hi All,
I have few questions on the certification status of OMW.
1. Can the source database be on any OS or only on windows/linux 3.0 ?
2. Are the supported target DB operating system are windows and linux 3.0 only?
Also can you pl send the "Database Migration Estimation Spreadsheet" applicable for all types of source DB.
my email ID: [email protected]
Regards
vara

Vara,
The source database can be on any platform. We can either access it directly via JDBC or via DSML.
Target Oracle , is any supported Oracle platform.
For the spreadsheet, I'd suggest you talk with your NAIO colleagues (Kartik Krishnamurti)
Donal

Does Active directory support for linux/mac/ubuntu clients?

Hello everyone,
I am pretty new to Active directory and my company has few requirements which he need to achieve by implementing Microsoft Active directory. I tried reading some blogs/documents on google but was not able to get the clear understanding. So would request
you all to please help me in getting the correct answers.
1) Does AD supports linux/mac/ubuntu clients getting authenticated from it?
2) Does AD supports root/non-root privilege login which is like admin/non-admin rights in windows for linux/mac/ubuntu?
3) Does Password policy works well on linux/mac/ubuntu cleints?
4) Does AD support auto-loading application after successful login in linux/mac/ubuntu clients? For eg: Logging into jabber client as soon as user logins IN.
5) Can AD trace and log the authentication information for linux/mac/ubuntu clients?
6) Does AD support rules based login for linux/mac/ubuntu clients?
7) Do we have high availability in AD runing Active-Active?
8) can we push patched/security policies via AD on linux/mac/ubuntu clients?
9) Can we schedule crons for linux/mac/ubuntu clients via AD like we have task schedules set-up in Windows?
10) Can linux/mac/ubuntu cleints be included part of GPO?
11) Auto-backups or auto mapping of shared drives by AD on widnows/linux/mac/ubuntu cleints?
12) Can we capture licenses etc(Server management) thing in AD.
13) Does AD support communication over SSL.
14) Does AD supports SSO authentication for linux/mac/ubuntu clients?
Thanks guys in advance
Regards
Sam

While I cannot speak for mac clients, there is a labour intensive method that allows linux distros to be able to connect to AD in a windows environment. Take a look at
http://technet.microsoft.com/en-us/magazine/2008.12.linux.aspx
for tips. Please note, it was designed with the Fedora/Red Hat Core in mind, but ubuntu distro's will also work, you just need the appropriate packages.

New Platform Support for ColdFusion 10 and ColdFusion Builder 2.0.1: Windows 8 and Windows 2012 Serv

Microsoft Windows 8 and Microsoft Windows 2012 server are now supported platforms for ColdFusion 10. The new Windows installers are available for download to all retail and licensing customers as well on the trials download page.
The ColdFusion Builder 2.0.1 installers have also been updated to support Windows 8. The existing MAC OS X installer for ColdFusion Builder 2.0.1 has also been certified to now support MAC OS X 10.8.
Refer this technote for more details about the support.

@Adam @CarlV
>what's the version number when you dump the server scope?
ColdFusion Server - Evaluation 10,0,8,284032
OK I see, the I button reports differently to Settings Summary.
About ColdFusion »
System Information
Server Details
Server Product ColdFusion
Version 10,0,8,284032
Tomcat Version 7.0.23.0
Edition Enterprise (Trial)
Serial Number
Operating System Windows Server 2012
OS Version 6.2
Update Level /D:/ColdFusion10/cfusion/lib/updates/chf10000008.jar
Server Settings > Settings Summary
System Information
Server Details
Server Product ColdFusion
Version ColdFusion 10,284032
Edition Enterprise (Trial)
Operating System Windows Server 2012
OS Version 6.2
Update Level /D:/ColdFusion10/cfusion/lib/updates/chf10000008.jar
Adobe Driver Version 4.1 (Build 0001)
Regards Carl M.

Platform Support for WLS 5.1 SP9 and / or WLS 6.x

When will BEA support WLPS with either WLS 5.1 SP9 or WLS 6.x?

Should have been more specific:
When will BEA support WLPS __3.2__ with either WLS 5.1 SP9 or WLS 6.x? The
docs say it currently only supports WLS 5.1 sp6/sp8, depending on platform.
Are there plans for BEA to support WLPS __3.5__ with WLS 5.1 SP9? The doc
says it currently only supports WLS 6.x
Jesus M. Salvo Jr. wrote:
>
When will BEA support WLPS with either WLS 5.1 SP9 or WLS 6.x?

Running BOE XI 2.0 reports on BOE XI 3.0 and platform support for BOE XI 3.

Hi,
I have recently purchased BOE Pro (for Ent Reporting) XI 3.0
Can you please tell me if crystal reports that have been running on BOE XI 2.0 will also run on BOE Pro (for Ent Reporting) XI 3.0
Can you also please tell me if BOE Pro (for Ent Reporting) XI 3.0 will run on AIX 5L v5.3
Thanks.

You're welcome...
> Thanks for your views. Actually, we do currently use
> a lot of ABAP proxies for XI 2.0 interfaces - the
> complexity of the mappings required meant a lot of
> the IDoc creation originally was ABAP'd in these
> proxies.
I agree. I often use proxies for the same reason.
> However, we do not intend to use proxies for
> XI 3.0. We are intending all inbound IDocs to be
> posted directly via IDoc XML through XI. Would you
> think that this remains feasible?
I think so. As you probably know, each R/3 using ABAP prx has a stronger connection to XI compared to an R/3 using IDoc or RFC. It has to access SLD, repository, and so on...
So if you have this R/3-XI link always with your 2.0 you shouldn't be messin up.
> On the maintenance side, it seems to us that XI 2.0
> is anything but stable! We spend a lot of time
> applying patches to AIX, microcodes, J2EE engine etc
> etc and have persistent memory issues for not really
> that much data. We are hoping with a properly sized
> XI 3.0 that the issues will reduce not increase
Yep, I know. My "almost everything fixed" was volountarily ironical
XI 3.0 works much better... though it has its issues as well.
Regards,
Alex
> Stuart

IE Support for Discoverer4i Plus Java Client

Hello all.
I have Discoverer nicely installed. I tried using the IE Plus client and the application comes up, but I get a ClassLoader error? I try the exact same thing with Netscape and JInitiator, no problem. I tried this with IE 5.0 and 5.5. Seems the JVM may only be up to 1.1.4 if you look at the discoverer help about screen.
Any ideas or workarounds? Can I use JInitiator in IE as well?
Thanks,
Brad

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Brad Worsfold ([email protected]):
Any ideas out there????<HR></BLOCKQUOTE>
Brad:
Check that the version of the JVM (Java Virtual Machine) is at least 5.0.0.3186. As an alternative, you can as you stated use Jinitiator within IE.
To do this, use the 'NETSCAPE' welcome page from the IE browser.
Ex: http://server-name/discwb4/html/english/netscape/welcome_nn.htm

SSL Pinning support for mobile apps ?

Hi there
i've just read this article and wondered if there is cross platform support for SSL pinning for mobile apps (iOS and Android) developed with AIR ?
So far my Google research wasn't successful, therefore i ask here.
Maybe this feature could be supported by a native extension ?
Thank you for any hint.
Regards
valley

I believe IBM has a mini version of DB2 designed for mobile Apps.
Good Luck,
J.Clancey
Pats World Champs!!!

AXAJ: support for old versions of browsers?

Technilac preview version supports IE7, FireFox2 only.
Are there plans for supporting old versions in future?

IE 6.x support for ADF faces rich-client components..
(there is no plan yet to support IE 6)

Is the Fujitsu-Solaris platform supported (ALL PRODUCTS)?

Is the Fujitsu-Solaris platform supported for Netscape/iPlanet products?
<P>
Quality assurance (QA) tests Netscape and iPlanet products (Solaris versions)
on Sun SPARC systems with the Solaris operating system from Sun Microsystems.
This setup is the reference platform.
<P>
If you run Netscape or iPlanet products on a SPARC/Solaris compatible system
(assuming the system is 100% compatible), the product should perform as
described. However, if you discover a compatibility problem on such a system,
Netscape/iPlanet Technical Support typically attempts to reproduce the defect
on the reference SPARC/Solaris platform. Then, if they find that the problem
exists on the reference platform, they will forward the defect on to
engineering for resolution.

Yes
We have plan to buy and use Aardvark OEM I2C Host Adapter and use it with LabView2013.
I am searching if this device already has LabView VI's for I2C communication.
I am not sure If we can use the VI's for Aardvark I2C/SPI Host Adapter to Aardvark OEM I2C Host Adapter.
Before we decide to buy Aardvark OEM I2C Host Adapter we just want to make sure that we can use it.
Best Thanks.
Jessie

Windows Azure Platform Support: "Prompted for "Windows Activation" when logging onto a Windows Azure Role Instance using RDP"

Symptom
When a user interactively logs (using RDP client) on to a Windows Azure Role Instance running Windows Azure Guest OS 1.11, they see a “Windows Activation” dialog box.
Action
The user can ignore this dialog box by simply clicking either “Cancel” or “Activate Later” button on the “Windows Activation” dialog box. This pop-up window is just an UI issue in Guest OS 1.11 and no OS functionality
issue. All Role instances running any version of Windows Azure Guest OS has valid volume licensing key and are already activated. There is no need to provide any activation key to validate the OS.
Please don’t try to activate Windows Azure Guest OS using your Windows Server OS Key, this will cause unexpected downtime and will require a reboot. Activating Windows Azure Guest OS is not a supported scenario.
Workaround
Use the next available OS or any previous version of OS (e.g., 1.10) to work around this issue.
Other forum references:
RDP on Webrole with newest guestOS: why is it asking for windows activation
Windows Azure Platform Support - If you found this post useful, let us know by clicking "Vote as Helpful". - #wapsupport

this is still an issue and the work around did not work

Issue regarding supported platforms manual for BO XI 3.1 sp2

In supported platforms manual for BO XI 3.1 sp2 windows there is a note on page 7 for specific patch level for OAS 10gR3 u201CPlease see release notes on the minimum version supported for Dashboard and Analytics.u201D We try to find on release notes (BOXI 3.1 & BOXI 3.1 sp2) for the exact patch level but there aren't any suggestions.
Could you please inform about the exact patch level that is needed on OAS 10gR3.

Hello,
Many thanks you for your answer.
Sorry to insist. It is not really clear in the SAP documentation about the minimum level of SAP NetWeaver BI 7.1 required
for installing "Business Objects XI 3.1 SP2 Integration kit for SAPSolutions.
Could you please find out (and provide me them) :
- The minimum BI 7.01 patch level for installing Business Objects XI
3.1 SP0 Integration kit for SAP Solutions (initial installation
package).
- The minimum BI 7.01 patch level for installing Business Objects XI
3.1 SP2 Integration kit for SAP Solutions
Thanks in advance
Best regards

Why FAN is only supported for Exalogic platform? Is this intended to include it in x86 platform?

Why FAN is only supported for Exalogic platform? Is this intended to include it in x86 platform?

Hi,
FAN support along with all of the RAC support enhancements in Tuxedo 12.1.3 are licensed as part of the Exalogic Elastic Cloud Software which is included with Exalogic and SuperCluster systems.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Client support for Intel Mac

Does anybody know if and when there will be support for MacOs on Intel Macs for the client libraries?

Unfortunately not many people who use Oracle also use Macs (let's face it, Macs are a small percentage of desktop usage in most business spheres). Combine this with the fact that the Intel Mac is a recent innovation and so currently represents a sliver of Mac usage compared to PowerPC, and you'll see that Oracle clients on Intel Macs must be quite low on the priority scale for porting.
I agree that this is frustrating for you and your clients, but Oracle have to make hard commercial decisions. One of those decisions is to favour the mainstream OS flavours over the niche ones. They never supported Macs until Apple switched to a Unix-based OS, because the previous OS would have been too much work for too lsmall a market segment. They never supported BeOS either, for precisely the same reason.
I guess they will eventually port the Oracle clients to Intel Macs, but not just yet. Still,Any word on MacIntel support? you're not alone.
Cheers, APC

Platform supported for ebiz contol center client?????

Similar Messages

Maybe you are looking for