Platin GUI Configration Problem
Hi Experts,
I Just Installed PlatinGUI on Ubuntu And Followed the Procedure Explained in Following Thread:
Link:http://forums.sdn.sap.com/thread.jspa?threadID=1214463
But I got Confused As i have Router String, Application Server ,Instance Number , System ID and Description with Me which i Generally put in SAPGuI for Windows.
Can AnyOne Provide Me Connection String if :
Description: ABCD
Application Server: 1.1.1.1
Instance Number : 00
System ID : XYZ
SAProuter String: 2.2.2.2
Thanks In Advance
Hi Naveen,
I did This Earlier But it is giving Error Which is As Follows :
Error: internal error
Location: SAProuter 21.10 on 'SVRQWR01'
Tue Feb 16 23:24:56 2012
Release 701
Component NI (network interface), version 38
rc = -93, module nirout.cpp, line 2286
Detail NiRClientHandle: route expected
And Also I wanted to now which all values from above Example are Mandatory to Pass in PlatinGui Configration String..
Regards,
Ashish Sachdeva
Similar Messages
-
GUI related problem in solaris 8 02/04
Hello all,
I am facing GUI related problem in the software running on solaris when I upgraded from solaris 8 02/02 to 8 02/04.
The GUI which was working fine on 02/02 was giving some menu selection problem in 02/04. In GUI applications i was unable to select items after double clicking it in solaris 8 02/04 while it was working fine in solaris 8 02/02.
Are there any O.S. related problem?
Thanks and regards,
AnkitWolfgang073 wrote:
Hi guys and ladys!
I added the LD_LIBRARY_PATH, Why are you doing that. It's probably a bad idea.
but the Openwindows not run OK (e.g. start cmdtool window without csh % prompt etc.).That's very possible. Don't make global changes to LD_LIBRARY_PATH (by putting in your login files for example). Instead if you need it to run a particular program, make a wrapper that sets the variable and then calls the program. That will limit the scope of those changes.
vi .login
# Erasing LD_LIBRARY_PATH
setenv LD_LIBRARY_PATH
# Important Paths set
setenv LD_LIBRARY_PATH /usr/ucblib:$LD_LIBRARY_PATHDon't do that.
Darren -
JDeveloper 10g (10.1.3.3.0) GUI Buldier problems
Hi there,
I am running JDeveloper on several platforms (Windows XP Pro SP 2, Ubuntu Linux, Mac OS 10 Leopard), but all of them manifest this problem.
I am designing a Swing Application.
When I load the source code for a given class I click the Design tab to bring up the graphical representation of my component (in this case, a JPanel).
In some cases this works fine. The component comes up in the main window, and I can graphically edit it.
In other cases, it comes up with a blank screen which says: "No GUI Selected. Double click on an item in the Structure Window to see its GUI here.". I double click the item as instructed, but nothing changes in the main window.
Can someone tell me exactly what JDeveloper is doing behind the scenes to facilitate this graphical GUI builder?
Does it just instantiate the object using the default constructor?
Does it save the layout somewhere?
Does it parse the layout from the java file?
Does it compile a separate version to render, or does it use the generated .class files?
This is really frustrating. I had a lucky spell where 10 out of 10 JPanels I was designing would render correctly, but now some of them have this problem.
What changes am I making to my source code to break the graphical visual editor?
Thanks,
AllenI have the same problem and I noticed some things in previous approaches, because the problem occured more than once.
Last year I noticed that the problem occured, because I changed to JDK 1.6 (project java version, not the one running JDeveloper itself). The solution was that I had to clean all .class files (with an ant-Task) and all worked fine, but Inner Class-GUI-Objects. These are ASFAIK not supported.
Now more than 6 months later I noticed that somehow old source code is working and displaying fine, but whenever I make an update to a newer revision the visual editor behavious like you said. (I am using subversion).
This thing is strange, but anyway I managed to find out, that JDeveloper uses the method jbInit() to initialize the GUI and that other methods like doSomeMoreInit() will not be executed. So one approach was also do create postJbInit() methods, but somehow I am stuck now.
Maybe this can help you with your problem, but I have to research a little bit. -
AppleScript GUI scripting problem.
Hi All,
I've created a script that will automatically open new document in Indesign CS2. But when i run the script i'm getting system events error as "NSReceiverEvaluationScriptError: 4". I tried following the instruction given in forums but still couldn't figure out. Below is the script i wrote. Can any one tell where and what i'm missing.
tell application "Adobe InDesign CS2" to activate
tell application "System Events"
tell process "Adobe InDesign CS2"
tell menu bar 1
tell menu bar item "File"
tell menu "File"
tell menu item "New"
tell menu "New"
click menu item "Document"
end tell
end tell
end tell
end tell
end tell
click button "Ok" of window 1
end tell
end tell
This is the submenu of menu New. This might be the problem cos the below script works for for which i'm clicking the menu not sub menu
tell application "Adobe InDesign CS2" to activate
tell application "System Events"
tell application process "Adobe InDesign CS2"
tell menu bar 1
tell menu bar item "Help"
tell menu "Help"
click menu item "Welcome Screen..."
end tell
end tell
end tell
end tell
end tell
My Mac version 10.4.10
Any help would be appreciated.
-JacinthaUsing GUI scripting is the road to madness; it's for emergency use only.<br />Try:<br /><br />tell application "Adobe InDesign CS2"<br />make document<br />end tell<br /><br />-- <br />Shane Stanley <[email protected]>
-
ACE Web GUI Interesting Problem
I have a very strange issue with the ACE web GUI interface. I have 2 ACE's that are in Active/Standby setup with a floating management IP address for each context. Now when I try to login to the Web interface with the Floating Mgmt. IP address for one of my contexts it always takes me to the Admin context and not the one I am trying to hit. I did some testing and I found it does this with every context when you try to login to the Web interface using the floating IP address. If I use one of the real IP's of an individual ACE I am able to get logged into the correct context. Has anybody else run into this? Is there something I can do to fix it? Also I noticed that when you login to the web interface using that same floating IP address it always passes RADIUS requests as the Admin context IP address as well.
I don't see this problem with version A3(2.x)
This was fixed with CSCso98451
G. -
Studio Management GUI Rendering Problem - Windows 8.1
I've got a problem that I can't seem to find the solution to anywhere. I recently purchased a new computer with Windows 8.1 and am having trouble with SQL Express 2012. The GUI rendering within the Server Management Studio seems to be really
messed up. Any help would be much appreciated. I've updated everything I can think of (Windows, SQL Express, video drivers, etc) to no avail.
Biggest problem initially is that when I go through the "Restore Database" process windows are not showing correctly. Such as the dialog box where I go find my database backup file - there are no files listed - it is just a blank dialog box.
Any help or ideas would be greatly appreciated. Thanks in advance.
(I would post some screenshots but I'm waiting for my account to be verified)Hi JaredBaszler,
According to your description, when you install SQL Server 2012 Express on Windows 8, the SQL Server Management studio dialogs could not displayed clearly. We need to verify if there is the third party software or antivirus software in your Server.
In addition, if your Windows Server works in high-DPI displays. There is detail about
living a High-DPI desktop
As you post, we recommend you install SQL Server 2012 on a clean machine, and check if the same error exists, if yes, the installation media
may be encountered some changes. And you can download the media again in Microsoft websites and reinstall again. If it display
normally in your new machine, reinstall again on your original computer.
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
Cisco 881W - ap gui interface problem
We have a new Cisco 881W wireless router;
used the CP Express gui interface to perform initial setup;
router assigned 10.10.10.3 as wireless ap gui interface;
when entering ap gui the entire screen is blank expect for an "enter" button near bottom;
clicking on this button does nothing; "error on page" is indicated on IE8 status;
assigned SSID is not broadcastingHi !!
im the same problem , but i fix it
first you must change the IOS version to ap801-k9w7-tar.124-10b.JDA3 ( you can dowload for the cisco web )
after download the image file you putt this command in the ap exec mode:
ap#archive download-sw /overwrite /force-reload tftp://x.x.x.x/ap801-k9w7-tar.124-10b.JDA3.tar
after the files are copied to flash memmory , the routyer boots with the new image ang bug fixed
its is my configuration working:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Current configuration : 3267 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname ap
enable secret 5 $1$T0Qk$/wKGmrwqo0WcBbvTapaNb.
no aaa new-model
dot11 ssid CASIO
vlan 1
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 7 121A04041B04010132222727
crypto pki trustpoint TP-self-signed-4051168682
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-4051168682
revocation-check none
rsakeypair TP-self-signed-4051168682
crypto pki certificate chain TP-self-signed-4051168682
certificate self-signed 01
3082023A 308201A3 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 34303531 31363836 3832301E 170D3131 30383139 31303037
33385A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D34 30353131
36383638 3230819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100B090 26BE5E77 FCB338C0 F54949DB 43EF95C1 61A9C3FA 38AC8BDC 18931195
B1B1A503 65A71B68 8940639A FB6A6D9B 0F327B09 F5C48ECD 89C1B279 9DC6DC98
11E5D014 914200BB 7F29CFD1 1CC5FDF0 F3AFE547 4954E2CA 37FC1CEC 60641871
D9949391 35C958B3 FBA6FBF7 116612FD DFAB9467 478A6E07 0F7B2616 F1204158
EC510203 010001A3 62306030 0F060355 1D130101 FF040530 030101FF 300D0603
551D1104 06300482 02617030 1F060355 1D230418 30168014 1120DB6C BE01CDEE
64A2DB14 FA240B27 D3573B9B 301D0603 551D0E04 16041411 20DB6CBE 01CDEE64
A2DB14FA 240B27D3 573B9B30 0D06092A 864886F7 0D010104 05000381 81003B69
8FC11090 E61D3BC1 D04FBDC5 622E8BC6 EB63B9FA C795BB15 BB05F417 CFC51F09
A8A1971E 7E523203 5A40654D B71623CB A48B193A 101FD1AD 868128E9 91940B71
5CFDDDD4 856B8170 7700C656 A75443DF DBB60F06 67E37A70 69175B84 24AB0380
221AAA1D 3EB80465 FD1C1F49 B75B0F1D BC4A82B2 EB2176F2 27F54894 5E94
quit
username Cisco password 7 106D000A0618
username ivan privilege 15 secret 5 $1$eEHQ$Dc.dDfXJz2fBbPIGhH.zg1
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 1 mode ciphers tkip
ssid CASIO
speed basic-11.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0
station-role root
interface Dot11Radio0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface GigabitEthernet0
description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router
no ip address
no ip route-cache
interface GigabitEthernet0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 192.168.10.5 255.255.255.0
no ip route-cache
ip http server
ip http authentication local
ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
line con 0
no activation-character
line vty 0 4
login local
end
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
now you cant acces to ap web gui
thanks !!! -
GUI standard problem...
i have a Jframe containing nested jsplitpane's divided as follows:
| | |
| |____|
| | |
|__|____|
the left JSplit pane consists of the a JTree inside a JScrollPane and the right JPlitPane. The right JSplitPane consists of a JList in a JScrollPane in the top and a JTextPane in a JScrollPane in the bottom. On clicking an element in the JTree the JList alters and on clicking an element in the JList the JTextPane alters. the problem i have that when altering the JTextPane with the following code:
textPane = new JTextPane("SOME TEXT");
bottomRightScrollPane = new JScrollPane(textPane);
the JTextPane does not update. I have gone through the root of re-adding all of the 3 components to the JFrame and then calling setVisible(true) which works, but it makes the GUI blink and i am sure there is a clearer, better, easier way of doing this. I have also tried the random adding of repaint() to every component i could find but again to no avail, Any help would be greatly appreciated as to how i can get the bottom right JScrollPane to show the update JTextPane. Thanks in advance.thanks again, the setDocument method does work, but unforutnatley i have mouseListeners and hyperlink listeners in the pane that i am overwrtiing the old pane with. Is there anyway to transfer these as well?
I tried using the revalidate method on the JScrollPane the text pane is in, the textpane itself, the splitpane the scroll pane is in and the split pane the splitpane is in. i also tried doing all of these at the same time but this didn't seem to do anything. Thanks again, if there is no easy solution do not worry since i can use the setVisible() method i have been using as it does the job, if in a somewhat ugly fashion. -
I'm making a chat client and I'm having problems with the threading around the GUI. It works when I don't use the GUI (and ActionListeners aren't at fault). I basically have two threads, a send thread and a receive thread, which are both subclasses that extend Thread. When I start them through the GUI, on an ActionListener, they don't work... but when I start them in a program that is GUI-less, they do work. Just for clarification, it's not the ActionListeners at fault, I tried doing a System.out on the same ActionListener and it worked.
A peculiarity is that when I make a new instance of the same frame [another frame.setVisible(true)] in my Receive thread, it starts receiving on the new window. I get the messages from the server, but I can't send stuff. I used to view this as a half-success, but now I think I'm going about it all wrong.
So, here's my questions:
1.Do I need to make more threads? I thought that everything outside the Receive and Send threads were naturally in a thread themselves, but it seems that they are not. Should I put the TextArea in my GUI that receives messages in a different Thread?
2.Or is the problem that I have to somehow refresh the frame without causing it to make new frames?It's hard to tell what's going on without seeing your code. What do you mean when you say "When I start them through the GUI, on an ActionListener, they don't work"? Does that mean the threads don't start, or you don't see anything happening in GUI, or everything freezes, or... etc, etc.? Please post code or describe the sequence of events in detail so we can help.
As a guess, it sounds like you're starting your threads when you press send, which doesn't sound right. In a chat, both threads should be running from the beginning, and when you have stuff to send you put it in a queue, then let the send thread pick it up. The receive thread just receives and puts messagese in the GUI. - see http://java.sun.com/products/jfc/tsc/articles/threads/threads1.html -
Hi everyone, im having a new problem with my sockets, i want to implement a button to stop server but because its client/server architecture it is freezed, how can i separate interface, please help :S
Like you say hiwa maybe the problems is the client, i posted in other post, but is not problem to post it again, thanks!!!
import java.net.*;
import java.io.*;
public class RecivirArchivoEncriptado2{
String fileCharSet;
String separator;
Socket clientsocket;
BufferedReader socketInput;
String s;
public RecivirArchivoEncriptado2(){
fileCharSet = "UTF-8";
separator = "##$##$##";
try {
clientsocket = new Socket("127.0.0.1", 12349);
socketInput = new BufferedReader
(new InputStreamReader(clientsocket.getInputStream(), fileCharSet));
catch (Exception e){
e.printStackTrace();
public void doFileGet(){
try{
PrintWriter fileOutput
= new PrintWriter(new FileOutputStream("archivoEncriptado.txt"), true);
while ((s = socketInput.readLine()) != null){
if (s.equals(separator)){
break;
fileOutput.println(s);
fileOutput.close();
fileOutput.flush();
System.out.println("archivo encriptado recivido");
fileOutput
= new PrintWriter(new FileOutputStream("archivoPlano.txt"), true);
while ((s = socketInput.readLine()) != null){
fileOutput.println(s);
fileOutput.flush();
fileOutput.close();
System.out.println("archivo plano recivido");
socketInput.close();
clientsocket.close();
catch(IOException e) {
System.out.println("conection refused port 12345");
}} -
GUI update problem: button take time to be disabled
I have a Stop button. In the actionPerformed() method for the button, I disable the button and also some other buttons (using setEnabled(false)) then there are some other codes that include Thread.sleep() method. Then again I enable some other buttons. Problem is the Stop button take time to be disabled. The time exactly equals sec provided in the sleep() method. I tried by puting the button disabling buttons' code in another thread that is called from SwingUtilies.invokeLater() method just before the sleep() method. It is very important to disable some buttons before Thread.sleep() is called. And only after the sleep() method I can enable some other buttons.
Please help me.Hello Experts! I can't hear you. 1) Swing related questions should be posted in the Swing forum
2) Quit bumping your question, you only posted it 30 minutes ago. People will answer when they have the time.
Your code in the actionListener needs to be executed in a separate Thread, so that when you invoke the "sleep" method the separate Thread sleeps, not the Event Thread. -
WLC 2112 GUI Connection problem
I am not able to connect to the GUI on the Cisco Wireless Controller 2112. I noticed from the interface summary that the "GU" (GUI?) are all "No" on both the management and ap-manager interfaces. How to set them to "Yes" from the console (CLI)?
Thanks.
<<<<System Info>>>>
(Cisco Controller) >show interface summary
Interface Name Port Vlan Id IP Address Type Ap Mgr Gu
est
ap-manager 1 untagged 10.1.4.62 Static Yes No
management 1 untagged 10.1.4.61 Static No No
virtual N/A N/A 1.1.1.1 Static No No
(Cisco Controller) > show network summary
RF-Network Name............................. RFGroup
Web Mode.................................... Enable
Secure Web Mode............................. Enable
Secure Web Mode Cipher-Option High.......... Disable
Secure Web Mode Cipher-Option SSLv2......... Enable
Secure Shell (ssh).......................... Enable
Telnet...................................... Enable
Ethernet Multicast Mode..................... Disable
Ethernet Broadcast Mode..................... Disable
AP Multicast Mode........................... Multicast Address : 0.0.0.0
IGMP snooping............................... Disabled
IGMP timeout................................ 60 seconds
User Idle Timeout........................... 300 seconds
ARP Idle Timeout............................ 300 seconds
Cisco AP Default Master..................... Disable
AP Join Priority............................ Disable
Mgmt Via Wireless Interface................. Disable
Mgmt Via Dynamic Interface.................. Enable
Bridge MAC filter Config.................... Enable
Bridge Security Mode........................ EAP
Mesh Full Sector DFS........................ Enable
--More-- or (q)uit
Over The Air Provisioning of AP's........... Disable
AP Fallback ................................ Enable
Web Auth Redirect Ports .................... 80
Fast SSID Change ........................... Disabled
(Cisco Controller) > show run-config
Interface Configuration
Interface Name................................... ap-manager
MAC Address...................................... 70:81:05:af:1d:20
IP Address....................................... 10.1.4.62
IP Netmask....................................... 255.255.252.0
IP Gateway....................................... 10.1.2.1
VLAN............................................. untagged
Physical Port.................................... 1
Primary DHCP Server.............................. 10.1.2.1
Secondary DHCP Server............................ Unconfigured
DHCP Option 82................................... Disabled
ACL.............................................. Unconfigured
AP Manager....................................... Yes
Guest Interface.................................. No
Interface Name................................... management
MAC Address...................................... 70:81:05:af:1d:20
IP Address....................................... 10.1.4.61
IP Netmask....................................... 255.255.252.0
IP Gateway....................................... 10.1.2.1
VLAN............................................. untagged
Quarantine-vlan.................................. 0
Physical Port.................................... 1
Primary DHCP Server.............................. 10.1.2.1
Secondary DHCP Server............................ Unconfigured
DHCP Option 82................................... Disabled
ACL.............................................. Unconfigured
AP Manager....................................... No
Guest Interface.................................. No
Interface Name................................... virtual
MAC Address...................................... 70:81:05:af:1d:20
IP Address....................................... 1.1.1.1
DHCP Option 82................................... Disabled
Virtual DNS Host Name............................ Disabled
AP Manager....................................... No
Guest Interface.................................. NoPort 30 detail Info:
GigabitEthernet0/30 is up, line protocol is up (connected)
Hardware is Gigabit Ethernet, address is 0c85.25d4.a91e (bia 0c85.25d4.a91e)
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 100Mb/s, media type is 10/100/1000BaseTX
input flow-control is off, output flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:31, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/0 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
6841 packets input, 2789942 bytes, 0 no buffer
Received 3461 broadcasts (3042 multicasts)
18549 runts, 0 giants, 0 throttles
18549 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 3042 multicast, 0 pause input
0 input packets with dribble condition detected
383015 packets output, 66928405 bytes, 0 underruns
0 output errors, 0 collisions, 5 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 PAUSE output
0 output buffer failures, 0 output buffers swapped out
Interface summary
*: interface is up
IHQ: pkts in input hold queue IQD: pkts dropped from input queue
OHQ: pkts in output hold queue OQD: pkts dropped from output queue
RXBS: rx rate (bits/sec) RXPS: rx rate (pkts/sec)
TXBS: tx rate (bits/sec) TXPS: tx rate (pkts/sec)
TRTL: throttle count
Interface IHQ IQD OHQ OQD RXBS RXPS TXBS TXPS TRTL
* Vlan1 0 12861 0 0 0 0 0 0 0
GigabitEthernet0/1 0 0 0 0 0 0 0 0 0
* GigabitEthernet0/2 0 0 0 0 0 0 2000 1 0
GigabitEthernet0/3 0 0 0 0 0 0 0 0 0
GigabitEthernet0/4 0 0 0 0 0 0 0 0 0
GigabitEthernet0/5 0 0 0 0 0 0 0 0 0
GigabitEthernet0/6 0 0 0 0 0 0 0 0 0
GigabitEthernet0/7 0 0 0 0 0 0 0 0 0
GigabitEthernet0/8 0 0 0 0 0 0 0 0 0
GigabitEthernet0/9 0 0 0 0 0 0 0 0 0
GigabitEthernet0/10 0 0 0 0 0 0 0 0 0
GigabitEthernet0/11 0 0 0 0 0 0 0 0 0
GigabitEthernet0/12 0 0 0 0 0 0 0 0 0
GigabitEthernet0/13 0 0 0 0 0 0 0 0 0
GigabitEthernet0/14 0 0 0 0 0 0 0 0 0
GigabitEthernet0/15 0 0 0 0 0 0 0 0 0
GigabitEthernet0/16 0 0 0 7219768 0 0 0 0 0
GigabitEthernet0/17 0 0 0 0 0 0 0 0 0
GigabitEthernet0/18 0 0 0 0 0 0 0 0 0
GigabitEthernet0/19 0 0 0 0 0 0 0 0 0
GigabitEthernet0/20 0 0 0 0 0 0 0 0 0
GigabitEthernet0/21 0 0 0 0 0 0 0 0 0
GigabitEthernet0/22 0 0 0 0 0 0 0 0 0
GigabitEthernet0/23 0 0 0 0 0 0 0 0 0
GigabitEthernet0/24 0 0 0 0 0 0 0 0 0
GigabitEthernet0/25 0 0 0 0 0 0 0 0 0
GigabitEthernet0/26 0 0 0 0 0 0 0 0 0
GigabitEthernet0/27 0 0 0 0 0 0 0 0 0
GigabitEthernet0/28 0 0 0 0 0 0 0 0 0
GigabitEthernet0/29 0 0 0 0 0 0 0 0 0
* GigabitEthernet0/30 0 0 0 0 0 0 2000 2 0
GigabitEthernet0/31 0 0 0 0 0 0 0 0 0
GigabitEthernet0/32 0 0 0 0 0 0 0 0 0
GigabitEthernet0/33 0 0 0 0 0 0 0 0 0
GigabitEthernet0/34 0 0 0 0 0 0 0 0 0
GigabitEthernet0/35 0 0 0 0 0 0 0 0 0
GigabitEthernet0/36 0 0 0 0 0 0 0 0 0
GigabitEthernet0/37 0 0 0 4997649 0 0 0 0 0
GigabitEthernet0/38 0 0 0 0 0 0 0 0 0
GigabitEthernet0/39 0 0 0 0 0 0 0 0 0
GigabitEthernet0/40 0 0 0 0 0 0 0 0 0
GigabitEthernet0/41 0 0 0 0 0 0 0 0 0
GigabitEthernet0/42 0 0 0 0 0 0 0 0 0
GigabitEthernet0/43 0 0 0 0 0 0 0 0 0
GigabitEthernet0/44 0 0 0 0 0 0 0 0 0
GigabitEthernet0/45 0 0 0 0 0 0 0 0 0
GigabitEthernet0/46 0 0 0 0 0 0 0 0 0
* GigabitEthernet0/47 0 0 0 5011848 0 0 2000 2 0
Interface IHQ IQD OHQ OQD RXBS RXPS TXBS TXPS TRTL
GigabitEthernet0/48 0 0 0 0 0 0 0 0 0
GigabitEthernet0/49 0 0 0 0 0 0 0 0 0
GigabitEthernet0/50 0 0 0 0 0 0 0 0 0
* GigabitEthernet0/51 0 0 0 0 3000 3 1000 1 0
GigabitEthernet0/52 0 0 0 0 0 0 0 0 0 -
Outlook configration Problem in sap b1?
Hi
I install new sap b1 9.0 and then upgrade in PL 08 then I install outlook in server
but outlook Add-on is not working
when I try to remove the add-on error is continue working without this add-onHi Gordon,
First of all thanks to recall me that i did,nt reply...and sorry for that. My problem is actually when i log on to sap B1 There is error occurred 'Internal Error' and application does,nt open. so, if you have any solution then plz suggest me.
Thanks With Regards
Bibha -
When I run this code the GUI doesn't provide enough space for my buttons. It provides enough room for my JLabels and TextFields, but cut's off the buttons.
public class ReceivingOrganizer extends JPanel
private JFrame frame;
private JPanel jpMain, jpLine1, jpLine2, jpCheckBoxPanel;
private JLabel jlContainer, jlSeal, jlTopInstruct;
private JButton find, print;
private JFormattedTextField ftfContainer, ftfSeal;
public static void main(String[] args)
ReceivingOrganizer object = new ReceivingOrganizer();
object.createGUI();
public ReceivingOrganizer()
super(new GridBagLayout());
GridBagConstraints c = new GridBagConstraints();
jpMain = new JPanel(new GridBagLayout());
jpMain.setBorder(BorderFactory.createEmptyBorder(30,30,30,30));
jlTopInstruct = new JLabel("Enter container number or seal number: ");
c.gridwidth=GridBagConstraints.REMAINDER;
jpMain.add(jlTopInstruct, c);
c.gridwidth= GridBagConstraints.RELATIVE;
jlContainer = new JLabel("Container: ");
jpMain.add(jlContainer, c);
c.gridwidth= GridBagConstraints.RELATIVE;
ftfContainer = new JFormattedTextField();
ftfContainer.setColumns(15);
jpMain.add(ftfContainer, c);
//ftfContainer.addKeyListener(this);
c.gridwidth= GridBagConstraints.REMAINDER;
c.fill=GridBagConstraints.BOTH;
find = new JButton("Find");
jpMain.add(find, c);
//find.setActionCommand("find");
//find.addActionListener(this);
c.gridwidth= GridBagConstraints.RELATIVE;
jlSeal = new JLabel("Seal: ");
jpMain.add(jlSeal, c);
ftfSeal = new JFormattedTextField();
ftfSeal.setColumns(15);
jpMain.add(ftfSeal, c);
//ftfSeal.addKeyListener(this);
c.gridwidth= GridBagConstraints.REMAINDER;
print = new JButton("Print");
print.setEnabled(false);
jpMain.add(print, c);
//print.setActionCommand("print");
//print.addActionListener(this);
jpMain.setMinimumSize(jpMain.getSize());
add(jpMain, c);
public void createGUI()
frame = new JFrame("Receiving Organizer");
frame.setResizable(true);
frame.setLocationByPlatform(true);
frame.setMinimumSize(frame.getSize());
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.add(new ReceivingOrganizer());
//Display the window.
frame.pack();
frame.setVisible(true);
}Don't use GridBagConstraints.RELATIVE for more than one component in the same row, and then only for the second-last component in the row. Read the API:
Use RELATIVE to specify that the component's display area will be from gridx to the next to the last one in its row.
Additionally, before a panel is validated or made visible, its size is zero, so you're effectively setting the minmum size to [0,0] -- not, I'm usre, what you intended to do. Ditto for the JFrame. I've added a couple of sysouts for you to see this for yourself.import java.awt.GridBagConstraints;
import java.awt.GridBagLayout;
import javax.swing.*;
public class ReceivingOrganizer extends JPanel {
private JFrame frame;
private JPanel jpMain;
private JLabel jlContainer, jlSeal, jlTopInstruct;
private JButton find, print;
private JFormattedTextField ftfContainer, ftfSeal;
public static void main(String[] args) {
SwingUtilities.invokeLater(new Runnable() {
@Override
public void run() {
new ReceivingOrganizer().createGUI();
public ReceivingOrganizer() {
super(new GridBagLayout());
GridBagConstraints c = new GridBagConstraints();
jpMain = new JPanel(new GridBagLayout());
jpMain.setBorder(BorderFactory.createEmptyBorder(30, 30, 30, 30));
jlTopInstruct = new JLabel("Enter container number or seal number: ");
c.gridwidth = GridBagConstraints.REMAINDER;
jpMain.add(jlTopInstruct, c);
c.gridwidth = 1;//GridBagConstraints.RELATIVE;
jlContainer = new JLabel("Container: ");
jpMain.add(jlContainer, c);
c.gridwidth = GridBagConstraints.RELATIVE;
ftfContainer = new JFormattedTextField();
ftfContainer.setColumns(15);
jpMain.add(ftfContainer, c);
c.gridwidth = GridBagConstraints.REMAINDER;
//c.fill = GridBagConstraints.BOTH;
find = new JButton("Find");
jpMain.add(find, c);
c.gridwidth = 1;//GridBagConstraints.RELATIVE;
jlSeal = new JLabel("Seal: ");
jpMain.add(jlSeal, c);
c.gridwidth = GridBagConstraints.RELATIVE;
ftfSeal = new JFormattedTextField();
ftfSeal.setColumns(15);
jpMain.add(ftfSeal, c);
c.gridwidth = GridBagConstraints.REMAINDER;
print = new JButton("Print");
print.setEnabled(false);
jpMain.add(print, c);
System.out.println("jpMain: " + jpMain.getSize());
//jpMain.setMinimumSize(jpMain.getSize());
add(jpMain, c);
revalidate();
public void createGUI() {
frame = new JFrame("Receiving Organizer");
frame.setResizable(true);
frame.setLocationByPlatform(true);
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.add(this);
System.out.println("Before pack: " + frame.getSize());
//Display the window.
frame.pack();
System.out.println("After pack: " + frame.getSize());
frame.setMinimumSize(frame.getSize());
frame.setMinimumSize(frame.getSize());
frame.setVisible(true);
}db
edit And you had two instances of ReceivingOrganizer, one instantiated in main(...) and the other in createGUI(). You don't need this, just add the present instance to the frame.
Edited by: DarrylBurke -
Non-GUI Terminal problem.
I am having a problem with the terminal at boot (not the terminal emulator). I could have sworn there was a cursor/insertion point (aka flashing vertical bar) in command line. But now whenever I boot into command line, the insertion point is gone.
I know of no such thing but I am told the hardware sometimes does its own.
Maybe you are looking for
-
I had to reset my phone and now when I text my contacts are not showing up
I had to reset my phone and now when I send and receive text messages it is not showing the contact name only the phone number. Help.
-
Partial Down payment settlement in APP
Dear Gurus, Can anybody suggest whether is it possible to settle partial down payment made to a vendor against a invoice in F110. EG: TO vendor XYZ a down payment of Rs.50000 is made. later a Invoice for Rs.70000 is raised. But we wnat to setlle only
-
I am looking for how to use a gift card in the itunes store. I have an acocunt already, and have no problem purchasing songs with a credit card, but do not see anywhere to enter in the gift card. I looked at help and it says it should be in the accou
-
New nanno 6th gen confugured to windows not working
i got a 6th gen nanno. downloaded ituneson my pc, connected my nano and it says i got to configure it to windows. i do this, now the nanno now will not go back when swiped to right, is unresponsive and VERY slow and i have to double tap to acess anyt
-
Hi, I'm new in data guard feature. I did create a physical standby and all works perfect. The archive are shipped and applied. I even sometime put the standby in read only mode in the morning and in the evening back in recovery mode. I just have some