Platinum Edition Remote Controls working with Vista Windows Media Center

I've got a SB Audigy2 Platinum with the RM-000W wireless remote. I've reciently built a media center based on Vista's Media Center and I was very dissappointed to see the remote was not compatible. Anyone had any luck on getting the navigation buttons to work at [email protected].

L is the option: "control of windows-applications" enabled?
?i use windows xp and i can only use the remote when the windows media player is open...and not minimized in task...
maybe i could help you...
greetz DN4

Similar Messages

WRT610N disconnects and does not work with Vista or media center extenders like the DMA2200

Linksys and all other router manufacturers advertise the greatness of the wireless 5ghz band (especially with 802.11n), but I’m beginning to have my doubts. It is true that the 5Ghz band is hardly being used so you'll have virtually no one to compete with. However, the 5Ghz distance in no way compares to 2.4Ghz, and as a matter of fact, I find it to be quite terrible. At approximately 20 feet away, both my Linksys DMA2200 and HP notebook barely get 1 bar using the 5Ghz N band with my WRT610N router. In comparison, while using my 2.4Ghz WRT54g router, I get 5 full bars at that range, and at least 2 bars from anywhere else in my house.
I have all Linksys equipment in my house as I have been impressed with all of their 2.4Ghz in the past. However, I’ve recently upgraded everything to dual-band N equipment and found numerous flaws in each of the new devices, plus none of them really even play well together. My setup is: Linksys 610n router, DMA2200 media center extender, and a WUSB600N Dual-Band Wireless-N USB Network Adapter for my laptop – all of which are currently using the most up-to-date firmware. Other devices include a WRE54G extender and Nintendo Wii.
Problem #1) The LELA software with the new N devices doesn't even recognize that my DMA2200 is a media center extender. Using LELA, I should be able to select my media extender and allocate more bandwidth for streaming media. However, since my extender only shows up as an “unknown network device” those options are greyed out. I tried to manually change the device to a media center, but still no go. I suppose you can manually allocate bandwidth in the router setup somewhere, but considering these are all Linksys products, it’s absolutely ridiculous that an option specifically incorporated in the LELA software for a Linksys Media Extender does not work!!!
Problem #2) If you are only using one system with the router, the router might actually work as intended. For most of us though there are going to be at least 2 or more systems connected to the router (wired, wireless, or a combination of the two) such as a PS3, Wii, laptop, PC, media extender, Xbox, etc. If that’s the case, you’re probably screwed because you WILL experience frequent dropouts… ESPECIALLY if just one those clients is a VISTA machine. Check the Linksys forums and you will find that this seems to be a problem with all of the new Linksys routers (610N, 310N, and 110).
Here is a Microsoft article that explains the issue
http://support.microsoft.com/kb/928233/en-us
Problem #3) Because of problem #2 I will never be able to get rid of the dropouts since my network is using one of Linksys’s media center extenders. The DMA2200 is essentially a VISTA PC to some extent and accepts DHCP requests the same as a VISTA PC. Since it is not really a PC though, there is no registry modification that can be done to alleviate the VISTA problem (not that the registry mod really works anyways). So as long as I try to use my DMA2200 wirelessly with my WRT610N router, the frequent dropouts will occur and there’s nothing I can do about it. This is REALLY TERRIBLE since the DMA2200 is specifically designed to be used with the WRT610N router in order to take advantage of the 5Ghz band and wireless N transfer rates. You absolutely need 5Ghz wireless N to efficiently stream HDTV WIRELESSLY, but if you lose your connection every 10 minutes, it is impossible to watch any type of streaming media.
Problem #4) As mentioned already, when the “N” 5Ghz range is working on the WRT510N router, the distance sucks compared to standard 2.4Ghz G, N or mixed mode networks. You can try to make it better by strictly using N products, disabling the 2.4ghz band all-to-gether, and using the wider 40mhz frequency, but it doesn’t really help. The higher 5Ghz band is a more concentrated signal and therefore simply does not reach as far as the lower 2.4ghz band. I wonder why all of these new products state that the 5Ghz range will increase your distance, when in fact it actually makes it worse?
So… basically, this router does nothing that it claims too and is basically rendered useless on any network with a VISTA machine. This has not been addressed by any Linksys firmware updates or VISTA software updates so there is no reason to even consider using this router if you you’re using VISTA or some type of VISTA Media Center Extender such as the Linksys DMA2200.
Although, I’ve always sworn by Linksys in the past, the amount of wasted time, frustration, and horrible support has really changed my view about them. I’ve reverted back to my old trustworthy WRT54g router and had to run cable through my house so that I wouldn’t have to box my DMA2200 extender up and let it collect dust in the attic. It’s really disappointing that I spent all this money to buy this equipment specifically because they’re supposed to work together, but in fact they don’t. Plus what’s the point of having top notch wireless equipment if you have to run cables in order for them to work?
Message Edited by bobbodavis on 11-15-2008 07:37 PM

I have fixed all the IP adresses to avoid the DHCP problem but I still have problems.
I have sereval scenarioes:
1. MC < 1Gb wire > WRT610N < 5.0n WIFI > MX
I can see HDTV on this one but it disconnects
2. MC < 1Gb wire > WRT610N < 2.4b/g WIFI > MX
No HDTV and disconnections
3. MC < 2.4b/g WIFI > WRT610N < 2.4b/g WIFI > MX
No HDTV but no disconnections - but very slow and streaming like youtube
4. MC < 100Mb wire > WRT610N < 2.4b/g WIFI > MX
No HDTV but nice picture - testing for disconnections right now - 30+ min.
Result:
This test was very good. Stabil streaming, no disconnects for an hour. Won't support HDTV but the rest seem to work fine.
5. MC < 100Mb wire > WRT610N < 5.0n WIFI > MX
Not tested yet - looking forward to this - might bring me HDTV.
Result:
This gives HDTV but there is a problem with stability on the streaming but very difficult to see on the picture. Testing for disconnects - now tested for 30 min. - no disconnects.
This looks really promissing.
I am pretty sure that the WRT610N have a problem in the switching part of the router specially when it has to switch from 1G to WIFI. I bought the WRT610N to get HDTV on WIFI and Cisco markets the DMA and WRT610N as a perfect match. But it definately have problems - i still do not understand their silence about this.
I will come back with the last results when I have them
/John
Message Edited by Infraxpert on 01-05-2009 04:38 PM
Message Edited by Infraxpert on 01-05-2009 05:35 PM

Does the Apple remote control work with MacBook Pro with retina? If yes, how can I sync it?

Does the Apple remote control work with MacBook Pro with retina? If yes, how can I sync it?
Thanks!

It should. First, turn on BlueTooth on the computer. In BT preferences be sure to check the option to look for all devices. Your remote should be picked up and a notice asking if you want to Pair it with the computer. Select Yes. Once it is paired it can be used to control your computer.

Remotely control the ITunes on Windows 7 64 bit PC with the new IPad

With the latest version of ITunes for both Win7 and the new IPad, I'm only able to use the new IPad to remotely control the ITunes on Windows 7 64 bit PC through wired connection ( ethernet cable ) to the wireless router. As soon as I connect my PC through wireless connection, the new IPad can not find my libraries.
Is this a known issue or am I missing some settings?
Thanks,

Are you using the 64 bit installer?
See also Recovering your iTunes library from your iPod or iOS device.
tt2

I purchased photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in december 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can

I purchased Photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in December 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can someone please tell me how i process canon 7D mk11 photos ?????. (is it possible to bypass camera raw and open the photo straight into CS5 without using camera raw first. if so how do i do that. if not how do i process pictures).
Thank you.
Brian in the UK.

Photoshop by itself cannot process raw image data. That is why the Camera Raw plug-in was developed. You could try the DNG converter and convert your images to the DNG format and then the Camera Raw that you have would be able to open them. I can't recommend Lightroom because you are using Vista, and Lightroom 5 cannot be used with that operating system. It may be time for you to get a new computer and upgrade your software.

Sharepoint 2013 list view quick edit does not work with out remote API permissions

sharepoint 2013 list view quick edit does not work with out remote API permissions.
When I give Use Remote Interfaces - Use SOAP, Web DAV, the Client Object Model or SharePoint Designer interfaces to access the Web site it works which is not an ideal situation..
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

This is true. If you use Fiddler to watch the requests from the list view quick edit you can see CSOM calls. For example when changing a value in a cell, when you tab out you will see the SetFieldValue and Update method calls on the list item.
Blog | SharePoint Field Notes Dev Tools |
SPFastDeploy | SPRemoteAPIExplorer

Re: Would serial number at the bottom work with other Windows Vista OS

Firstly sorry for my English.
I have only one question.
My hard drive is broken with my recovery partition.
If I download windows vista and install the system with my original serial number on the laptop, this will be working or I need to activate him after installation.
I hope this is the same number than before is installed on my first installation.

Hi Marcin
I doubt that the serial number which is placed at the bottom of the unit would work with another Windows Vista OS. But its worth a try
You could test it I heard that is very rare cases this was possible
Anyway, if your HDD is broken and its not possible to create a recovery DVD using the software Toshiba Recovery disk creator then you should contact the ASP in your country for a help.
If the warranty is valid the HDD should be replaced just for free. If you need only the Recovery DVD then you could order it here:
https://backupmedia.toshiba.eu/landing.aspx
Regards

How do I get fios to work with my new desktop w/ Windows Media Center

Can someone please help me I have "fios".TV and internet 1HDSTB + 1HDDVR with multi room dvr Home media mgr.how do I get fios to work with my new desktop HP Pavillion m9715f**(specs below)**w/ Windows Media Center or did I just throw away my money?
also equipted is 47" Samsung 850series 1080p 120hertz HD LCD TV + 36" Samsung 560series 1080p 60hertz HD LCD TV and 19"Samsung 950b LCD Monitor
** computer specs**
Product number NZ017AA
Introduction date 30-Jun-2009
Country/region sold in: United States,Canada
Hardware Base processor
Phenom-9650 (A) 2.3 GHz (95W) 3600 MHz HyperTransport 3.0 Socket, AM2+
Chipset AMD 780G
Motherboard Manufacturer: MSI Motherboard Name: MS-7548 HP/Compaq motherboard name: Aspen-GL8E
Power supply 300W
Memory
Component Attributes Memory Installed 8 GB Maximum allowed 16 GB (4 x 4 GB) (64-bit OS)
4 GB* (4 x 1 GB) (32-bit OS)
*Actual available memory may be less Speed supported PC2-6400 MB/sec Type 240 pin, DDR2
Hard drive750 GB SATA 3G (3.0 Gb/sec)7200 rpm
Blu-ray player & SuperMulti DVD burner with LightScribe Technology drive
This Blu-Ray Disc DVD drive introduces a player that reads Blu-ray Disc format enabling you to watch high-definition Blu-ray Disc movies. NOTE: This drive does not include high-definition write capability.
Formats/Disc types Write speeds Read speeds Storage capacity Blu-ray Disc BD-ROM SL NA up to 6X up to 25 GB BD-ROM DL NA up to 4.8X up to 50 GB BD-R SL not supported up to 6X up to 25 GB BD-R DL not supported up to 4.8X up to 50 GB BD-RE SL not supported up to 2.3X up to 25 GB BD-RE DL not supported up to 2X up to 50 GB HD DVD not supported DVD DVD-ROM SL NA up to 16X up to 4.7 GB DVD-ROM DL NA up to 8X up to 8.5 GB DVD+R SL up to 16X up to 12X up to 4.7 GB DVD+R DL up to 4X up to 8X up to 8.5 GB DVD+RW SL up to 8X up to 10X up to 4.7 GB DVD+RW DL not supported DVD-R SL up to 16X up to 12X up to 4.7 GB DVD-R DL up to 4X up to 8X up to 8.5 GB DVD-RW SL up to 6X up to 10X up to 4.7 GB DVD-RW DL not supported DVD-RAM up to 5X up to 5X up to 4.7 GB CD CDROM NA up to 40X up to 700 MB CDR up to 40X up to 40X up to 700 MB CDRW up to 24X up to 40X up to 700 MB CD-DA NA up to 32X up to 700 MB Video CD NA up to 10X up to 700 MB
Wireless Wireless LAN 802.11 b/g
Video Graphics Radeon HD4350
512 MB DDR2 memory
I/O Ports: HDMI, VGA, single-link DVI
Television Hauppauge ATSC/NTSC TV tuner card with FM tuner
Sound/Audio High Definition 8-channel audio
ALC 888S chipset
Network (LAN) Integrated 10/100/1000 Base-T networking interface
Memory card reader
Contains an Infrared receiver for remote control
Supports the following cards:
Compact Flash I
Compact Flash II
IBM Microdrive
Secure Digital (SD)
mini-SD
MultiMediaCard (MMC)
Reduced size MultiMediaCard (RS-MMC)
MultiMediaCard Plus (MMC plus)
MultiMediaCard Mobile (MMC mobile)
Memory Stick
Memory Stick Pro
Memory Stick Duo
Memory Stick Pro Duo
SmartMedia
xD Picture Card (xD = extreme digital)
External I/O ports
I/O ports on the front panel
Port type Quantity 15-in-1 (4 slot) with IR Receiver One USB Two Headphone One Microphone One Audio L-R One S-video in One Composite video in One
I/O ports on the back panel
Port type Quantity PS/2 (keyboard, mouse) Two S/PDIF out (coaxial) One VGA One (disabled due to the installation of a graphics card) DVI-D One USB Four 1394a One LAN One Audio (side speaker out, rear speaker out, center/subwoofer-out , line-in, line-out, microphone) One Each
Expansion slots
Slot type Quantity PCI Express x16 One (None available) PCI Express x1 Three (Two available)
Drive bays
Bay type Quantity 5.25" Two (One available) 3.5" Two (One available) Personal Media Drive One (One available) Pocket Media Drive One (One available)
Keyboard and mouse HP multimedia keyboard HP PS/2 optical mouse
Remote Control USB infrared remote control,Remote control expansion card with IR ports,IR emitter cable to transmit codes to a set top box

Based on what you've posted, your computer does not have the right tuner. You need a QAM tuner to record locals from FiOS, or a CableCard tuner to record all local and cable channels from FiOS.
QAM tuners to record local channels only
This requires Windows Vista or Windows 7
Hauppauge WinTV-HVR-2250
SiliconDust HDHomeRun (info on a sale)
CableCard tuner to record local and cable channels
This requires Windows 7 + one CableCard from Verizon for $3.99/mo
ATI TV Wonder Digital PC CableCard Tuner (records one channel at a time) -- $200-$250 on ebay
Ceton MOCUR tuner (records four channels at a time) -- coming in early 2010 for $400-$600
Make sure your computer has Windows 7 Home Premium (or better) installed. That's necessary to support CableCard tuners.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.

Using the Apple Remote with Windows Media Center

Hello guys
First of all, I am Swiss, so excuse me for my bad English (grammar and stuff...)
So, my problem: I bought the Apple Remote and I think it is very awsome! But since Apple has removed Front Row in Lion, I don't really can use it anymore. So I'd tried to use it with Windows 7 Media Center. But it doesn't work correctly. Does anyone know, how to fix that?
Thank you

I had a Green Button remote provided with HP PC XP, Vista for Windows Media Center prior to getting Mac Pro.
Now in Lion, I have Hauppauge WinTV HVR-980 USB adapter (less than $100) including a remote that works in Lion for the Hauppauge TV app.
In Windows, the same remote works with all "Media Center" processes Music, Pictures, TV... instead of mouse/keyboard. If your TV service requires set top box, then you have to use its remote to change channels.
If ISP's internet Co-Ax also carries TV signal, you can get Cable Splitter (smple picture):
http://www.ebay.ca/itm/2-Way-TV-RF-Coaxial-Cable-Splitter-CATV-Signal-/320868649 227?pt=LH_DefaultDomain_0&hash=item4ab543090b
and feed 1 co-ax to USB TV adapter, the other to your Modem/Router.
The Hauppage USB was a good choice because it serves Mac & Windows.
Also, In Windows, if you have an XBox, it can be used as "Extender" for your A/V output.
http://windows.microsoft.com/en-US/windows7/Set-up-a-Windows-Media-Center-Extend er
Although this may not answer your question, it describes other options.

Making the WMB54G work with Vista (Service Pack 1) - it does work.

I posted this in response to a thread, thought it could use its own topic.
There is hope and potential success for Vista users!   I got the WMB54G 2 days ago. I spent 6 hours with it and nearly threw the product AND my computer out the window the first night. I scoured this forum for the past two days, and by putting pieces together from various threads, I'm now using the Music Bridge successfully with my 1 month old Dell XPS M1530 with Vista Home Ultimate with Service pack 1.  Once I had my gameplan, it worked perfectly the first time I tried the new approach. I will try to write a step by step process of what I did in the next few days but for now.....
1. Throw out the installation CD that comes with the music bridge (its useless for Vista).... I'm kidding, but you get the point.
2. You HAVE to dowload the Vista compatible installation utility and Firmware upgrade from the Linksys forum - I don't have the link right now, but its here in this forum.
3. Run the Vista driver setup to install the Musicbridge utility - the "Install utility" link at the bottom of the setup screen, but DO NOT try to configure the router since you'll just have to do it again later.
4. Run the firmware upgrade for the router (it behaves exactly like the setup utility, but instead of configuring the hardware for use, it upgrades the fimware)
5. Run the Vista driver setup to configure the router (only after the firmware upgrade).   I didn't have to do anything outside of the auto setup. i'm using a Linksys wireless G router as well, and it connected with 64 Bit WEP encryption no problem once i entered my encryption passphrase.
6. Open up MSCONFIG and disable the CMFLYWAVE Application on Startup
7. In your Program Files directory, find \Linksys\wmb54g\wmb54g.exe, \Linksys\wmb54g\driver\cmas2ds.exe, and \Linksys\wmb54g\driver\cmflywav.exe - For all three files, right click and go to Properties\compatability.   Check the "Run this program in compatability mode for:"   pick XP with SP 2.
THANK YOU SO MUCH TO THE PEOPLE WHO POSTED THAT LAST BIT!!!!
8. I'd suggest restarting the computer now.
9. You might get a "WMB54G.exe has stopped running error" on restart... that's ok
10. Start the following files in this order:
cmas2ds.exe
cmflywav.exe
wmb54g.exe
11. The utility should start, and then you can connect to the bridge via the system tray icon. - you might have to also set the default audio device to the Music Bridge by right clicking your system tray speaker icon
12. Uncheck the "Start the Music Bridge when I start Windows" option in the utility screen - and execute the three files in step 10 each time you restart.
I hope this works for you.
Solved!
Go to Solution.

I finally got my WMB54G to work with Vista SR1. It took me 4 hours of struggling to figure it out though.
What I did was:
1. Download the latest utility and firmware from the linksys support site.
2. To set up the device, preferably use http://192.168.1.210. There are http setup instructions on the linksys customer service site. Alternately, you can use the setup wizard on the CD but I would recommend avoiding it if you can. If you do use the setup CD and it installs the WMB54G utility, promptly uninstall the utility afterwords and restart the computer.
3. Update the firmware to v.2.18 by using http://192.168.1.210 and going to the HELP tab
4. Install the latest utility from the support site but do not run the main setup. Simply run setup.exe in the utility folder AND GIVE IT PLENTY OF TIME. Walk Away and let the installer finish and close. Then do the thing people discovered -- edit the properties of C:\Program Files\Linksys\WMB54G.exe and make sure it is set for running in XP compatability mode.
5. Restart the computer
Mine started working fine after I did all of this -- the WMB54G came up automatically and found the device. Keep in mind I do not have WEP or anything -- just unsecured wireless.
Good luck.
Mike
Message Edited by jmfife on 01-17-2009 10:51 AM
Message Edited by jmfife on 01-17-2009 10:54 AM
(Mod Note: Edited due to non-compliance of forum guidelines.)
Message Edited by giantherockstar on 01-17-2009 11:05 AM

Equium A110-276: multimedia buttons do not work with Vista

How to reinstall the software of the multimedia buttons at the right side of the laptop in Windows Vista? becuase when I install windows vista the buttons doesn't work anymore.. multimdia buttons: the WMPlayer, play/pause, stop, next and previous buttons... a nyonw got a software or got the same problem?

Hello
I have checked Vista download page and your notebook A110 (PSAB2) is not listed there. Usually you need Toshiba controls but with Vista this tool is not available separately. I presume it is a part of Value Added Package.
Have you already installed anything downloaded from Toshiba download page http://pc-support.toshiba-europe.com/vista/ ?

My ipod nano is no longer recognized by itunes after I installed windows 8.1. The ipod nano still is recognized and works with a Windows 7 computer

My ipod nano is no longer recognized by itunes after I installed windows 8.1. The ipod nano still is recognized and works with a Windows 7 computer

Hello, Pete.
Here is an article I would recommend going through when an iPod is not recognized by iTunes or the computer.
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Usually the resolution is updating the Apple Mobile Device Driver. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.

Apple Remote stopped working with Lion on iMac

My white Apple Remote does not work with Lion on my iMac 2.4ghz Core 2 Duo anymore.
I'm sure it was working recently as I was able to control the volume on my RadioShark application. Now that doesn't work anymore and I can't seem to get the remote to work with anything.
I've tried restarting my iMac, swapping the remote's battery, and using another remote but still no success. The only response I get is from the remote's 'Menu' button which, when pressed, toggles between two graphics on screen - one a four-way arrow indicator with a centre button, and the other what appears to be a Forward/Back, Centre button with corner indications for Expand/Shrink.
I've tried the 'Pair' option but pressing 'Menu' and 'Fast Forward' does nothing on screen - no sign of the chain-link 'Paired' symbol. Neither of the white remotes I tried is 'Paired' with the iMac.
It seems I must have done something to cause this but can't think of any change I made that could be responsible. I know Front Row is no longer accessible in Lion, but is there any other app I could test my remote on? Any kind of hardware reset needed? (unlikely, I know, with two separate remotes showing the problem).
Anyone have any ideas?
Thanks.

I'm replying to my own question because my remotes are working again.
I'm not sure what I did to fix the issue, but I tried shutting down all open applications (I remembered that by default Lion re-opens with everything as it was). And shortly afterwards I got full functionality back for my Apple Remote.
I'm not sure what caused the issue. I did install Easy Timeline, which I'd downloaded today from the Mac App Store. It has Apple Remote functionality, so I'm not sure if it was in some way implicated. It's working now with my remote, as is iTunes, and RadioShark.
Weird!

I need to know how to delete the most recent version of Firefox. I JUST downloaded it tonight and my computer doesn't have that little edit bar to work with so I can download the proper Adobe player and my internet has been screwed up ever since I downlo

I need to know how to delete the most recent version of Firefox. I JUST downloaded it tonight and my computer doesn't have that little edit bar to work with so I can download the proper Adobe player and my internet has been screwed up ever since I downloaded the new version of Firefox. I just want the old version of it back since I apparently can't download the Adobe stuff that is necessary to keep my computer safe from Hackers. It sure would have been nice to know there was an issue with the new Firefox Update BEFORE I uploaded it. I have Vista which is usually an issue with both Adobe and Firefox. I don't seem to be able to run much of Adobe at all on my computer because of the Vista.
== This happened ==
Every time Firefox opened

I have also noticed all my settings won't stay set, example....I removed the check mark from "third party cookies", the when I close Firefox and reopen the check mark is back, also my tool bar has screwed up....can't reset, been having trouble the up grade.

Adobe Photoshop 6.0 - will it work with Vista?

Hey there -
I bought Photoshop, Illustrator, InDesign, etc in 2001 (I don't know if that is relevant or not), and have Photoshop 6.0, for example.
My laptop with Windows XP is dying very soon. I may be forced to get a computer that has Vista.
Will my software work with Vista?
I appreciate you help!
Alex

I sent myself an email back when I upgraded to Vista, I just looked back and found the email. It had some links in it (which are no longer good), but there was some useful information and troubleshooting guides on there on how to get various older versions to work on Vista machines. I was thinking there was a "trick" on there about setting the date back on the computer or something while reinstalling Illustrator in order to get it to work. I have AI 10 at home as well, but I have not yet installed it on the Vista Machine as I got CS3 and use it on my XP machine just fine.
If I were you I would hold off as long as you can, like Marian said, and maybe by then CS5 will be out too.

Platinum Edition Remote Controls working with Vista Windows Media Center

Similar Messages

Maybe you are looking for