Platinum XFI front panel problems. Vista

before I installed Windows Vista Ultima 6.0.6000 build. I was able to plud in rcas to the front ports of the soundcards front panel and produce my ps2/wii and so on sound onto my computer speakers. LogitechZ5500. Well ever since I got vista it seems no sound comes through the rcas at all. Will most likely have to buy optical audio cable to connecft from my tv to my speakers directly but kindof annoying. Any ideas on what to try to circumvent this?

guess its optical for this, for now ... I am assuming the optical works as I can see it .....Message Edited by scorpion_saga on 03-5-2007:26 PM

Similar Messages

K8N Neo Platinum + Sonata Front Panel Audio Problem

Hello,
The front panel audio speaker output is reversed when using headphones on my K8N Neo Platinum and Antec Sonata case. If I swap the left and right front panel audio output signal connectors, the headphone speakers are fine, but then my normal front speakers are reversed. All other connectors seem to be plugged in correctly. I've tried using nvswap, but doesn't seem to work on nForce3. Currently using Realtek driver version 5.10.0.5620 (had the same problem with the drivers included on mb cd) on WinXP Pro SP1 and 5.1 speaker setup (would like to use FPA for mic/headphones while gaming).
Let me know if you need any additional info.
Thanks.

I am having the same problem as well. Was able to correct front output jack by switching the connections. But rear audio is still backwards. I havent tried any sort of 5.1 or 7.1 channel audio setups

Audigy 2 ZS Platinum front panel under VISTA

I've got the card and front panel installed and apparently working, except one issue. I'm trying to pipe in sound from a stereo receiver to the front panel auxiliary 2 inputs, so I can listen to a sporting event(broad cast on AM) over my pc and record it. When I turn on the receiver and hook it up, I hear nothing. When I start the recording software and record, it records from the auxiliary 2 perfectly and I can hear the broadcast fine on playback. So, the question is, why can't I hear it li've over my speakers?!?! Extroadinarily frustrating! VISTA has no volume control display(that I could find) like XP did where I could check the auxiliary 2 levels, etc.
Again, I'm running VISTA Ultimate 64 bit and have the most current Creative sound drivers installed and all other sounds from within programs seem to be working 00%.
Thanks for any help!

Nothing huh? Nobody has any idea about this or knows of another thread where this question was answered?
Thanks in advance if you can help out!

Audigy 2 ZS Platinum Pro Front Panel not functio

Okay, so I recently bought a new motherboard, processor and ram.
Upon installing all components, everything works just fine.
Except my Audigy 2 zs plat pro front panel.
The power light is on, but it won't recognize ANYTHING plugged in to it.
It worked just fine on my old set up, so I'm not sure what's going on.
Here's my current set up;
Asus A8n SLI Nforce4 socket 939 mobo
AMD 64 3800+ cpu
gb Corsair VS
BFG GeForce 7800 GT graphics card
Audigy 2 ZS Platinum Pro (with completely updated drivers, btw)
The mobo DOES have onboard sound, so I don't know if that would be conflicting with anything, but I can't find any problems anywhere.
Power is hooked up correctly, and all wires are, too.
Blah! Any suggestions?Message Edited by iherbie on 2-28-2005 :4 PM

iherbie,
I don't have a platinum pro, just a plain Audigy 2 ZS. So I can only offer some general troubleshooting ideas. First, check for IRQ conflicts with other cards. Second, make sure the cable from the card to the front panel is securely seated. Removing and replugging is a quick way to verify this. If you have a multi-meter, you could test the integrity of the cable. Third, removing and reseating the sound card itself, or moving it to another PCI slot would be a good idea. If that doesn't help, then I'd uninstall and reinstall the software and drivers because perhaps front panel functions weren't properly installed the first time. I'm assuming that the rear in/out jacks work, and that the Creative CD that came with your Audigy is compatible with your current version of Windows and service pack, and that you have disabled onboard sound in your BIOS.Message Edited by Katman on 0-07-2006 08:38 PM

Remote Front Panel Problem

Hi
I am using a TAB control in a VI that is published as Remote Frontpanel.
When changing TAB the controls are often grayed out in the browser even when they are not in the running LabVIEW VI !
A Combo box may also contain the apps default values instead of the values from the running VI !
Any hints to solve this ?
I have login/logout in my application, and i need to auto logout when the last Remote Front Panel User disconnects.
How do I detect that there is no listeners/clients ?
The "connection manager.vi" is password protected, so i can't get any hints from there !
Best Regards
Teddy

I see thank you. Very funny because i thought i had to do something with duplicating the real time target.
So regarding the above problem, is there any way to be connected remotely to the target and when the link is broken to reconnect without affecting the operation of the VI running?
For example, lets assume we connect to a remote front panel which has a simple VI with just a 1 second period timed loop running and for each iteration of the loop i monitor and i save the index of the loop. When i connect to the VI i request control and i click run. The VI starts running. After one minute, at loop iteration 60 the link between the host and the target breaks. The VI should continue running.
After 1 minute of broken link the network is again available.
What can i do to re-establish connection without affecting the VI operation and continue monitoring the VI. If reconnecting after 1 minute i will be expecting to see the loop iteration to be 120 and keep running. Is there any way to do this?

XFI front panel digital out probl

Ive had an xfi card for a while now, the xtreme pro gamer, i've loved it, and i wanted to upgrade and get the front panel for 80$, so i did, hoping i could connect my 5. headset threw fiber optic rather than the analog, and my 000 watt surround sount threw digital coax. The only reason?I didnt buy the flex jack module was because?I need a port for a mic.
Well i got it yesterday and everything seems to be working, exept for the fact that it doesnt recodnize my back speakers?on either one,?my headset and surround sound in my room.
Just?the front speakers, center and sub are recodnize, so wen i go into my thx console in game or entertainment mode, and i?click the back speakers to make a sound, the sound comes from the front speakers ...wtf ,
Secondly on my heaset base?the?dolby Pro Logic light is on..shouldn't the Dolby Digital Light be on.
Sombody plz help, this is driving me nuts.
just cause i know you will all ask, my in room surround sound is a 000watt phillips 5. surround sound home theater system
and my headset is this .. http://www.tigerdirect.com/applicati...94&sku=T26-090
my headset worked beutifally before , wen connected by analog, i was hoping it would be better with fiber optic..

Bump?..

Remote Front Panel Problems and Best Practices

All,
Problems
I'm currently attempting to host a Remote Front Panel from a cRIO 9073. The intent of the front panel is to control and configure the services running on the cRIO. Currently I've been experiencing quite a few problems getting this to operate smoothly.
These are the problems I'm currently experiencing.
* Front panel takes a very long time to load (~45 Seconds).
* On close the front panel may reset the cRIO.
* Front panel may cause excessive CPU usage.
* Plugin has problems in Firefox.
I'm fairly sure that I've installed all of the Latest NI software (I'm using LV 2009f2)
I currently cannot post the code as it's proprietary.
Currently the front panel consists of two timed loops one running at 500ms intervals and the other running at 1000ms intervals. The GUI is basically a tab control and on the heaviest tab contains about 15 buttons.
Questions
Is it not possible to use event structures in embedded LabVIEW? So far I've had to code my own event loop to handle all the events I wish to process on the remote front panel, and I feel this might be causing a problem.
Is the sort of functionality I'm trying to achieve acceptable in Web Front Panels?
It seems that the reason it takes very long for the VIs to load is that the VI Front Panel Server must fire up. Is there a way to make this or whatever the component is that handles it fire ahead of time?
Thanks for your time, I look forward to discussing this.
Regards,
Ken

Hi Ken,
Is this a remote front panel for a real-time VI? Is it built into an executable? If this is a RT VI, you cannot use event structures. More details are available in this KB:
Can I Use the Event Structure in LabVIEW RT?
I assume you have seen this?
How Can I View Remote LabVIEW Real-Time Front Panels in a Web Browser?
Are you still having the cRio reset issue and CPU usage increase?
Kristen H.

TItanium XFi Front Panel audio hookups

I see that for front panel hookups you MUST have the creative IO panel, but I can't seem to find where to buy it...thought I don't want to. I am wanting to use the front panel hookups on this case: http://www.newegg.com/Product/Product.aspx?Item=N82E68938? or any similar case like it. But there isn't any plugins for the audio hooksup on this "advanced" soundcard. I was wondering if the cable here would work: http://picasaweb.google.es/rmorinr/SoundBlasterXFi#5099379872528468578 ?
Or if someone could point me in the direction that creative has the IO front port hidden for purchase that would be great.

I'm getting the same issue, I've read a lot of threads elsewere and it seems that antec is not an standard HD front panel, so basically we have to plug them manually their pins unfortunatelly I haven't any luck doing that

Problem : controls & indicators not updated when programatically open Front Panel

Hi,
I have a strange problem when I want to progamatically open the front panel of a sub-vi: for some sub-vis the controls and indicatores are correctly updated while for others they are not (ie the controls show outdated values).
I have created an example here that illustrate this. The 2 sub-vis are *exactly* the same, but only one shows updated controls when I open it (with the sub-vi previously closed of course).
How is that possible?
What do I have to do to have the controls updated to the last value of the *last call* when I open the sub-vi?
Solved!
Go to Solution.
Attachments:
Front panel problem.zip ‏35 KB

titi_nicolas wrote:
mhmmm,....no that is NOT the reason... Have you tried the VI???
Honnestly, I would not bother people on this forum for such a stupid mistake.
And I also expect people to know how to run a VI....
And to play in your game, you forgot -3) Turn on the PC, -2) log in windows, -1) open labview...
Well, I DID run your VI and everything worked just fine, however I no longer have LabVIEW 7.1 so maybe your observation no longer applies to newer versions. It could also be because they were just upgraded as Ben noted. I did not study it in detail.
And Yes, as Ben noted, invisible VIs don't get updated for performance reasons (and not to waste extra data copies for the controls and indicators). LabVIEW is typically smart enought to update when needed, e.g. if the subVI tries to print its panel, etc.
I guess you haven't been in this forum for too long, but since controls can easily be operated in edit mode is is absolutely important to mention at which step you run the VI. (try to operate your controls with the computer turned off and you will see that it is not that easy ). Also if you have been programming for any length of time, you should know that stupid mistakes happen all the time (at least to me and Ben ). It is much easier to weed out the stupid mistakes with a quick question&answer than to spend hours searching for a deep and complex solution.
LabVIEW Champion . Do more with less code and in less time .

Switching headphones to 5.1 (volume panel)problem.. Please h

When changing headphones(headset) to 5. in volume panel, my rear speakers and middle one
won't play instead I'm hearing the middle rear left? and rear right in headphones...
In order to restore the 5.
I need to run diagnostic tool where I need to chose the "restore to default" option?
I need to do this every time...
headset is connected to the xfi front panel, 5. speakers are connected to the xfi card .
[x-fi platinum champion fatalty, xp]

Try the standard fixes:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.

Problem with Audigy 2 Platinum Front Panel Input

0Problem with Audigy 2 Platinum Front Panel Input? Hey everyone,
Here's the background of the issue. I got a PS3 over the holidays for literally free
I had my computer out in a testbed style. Plugged the PS3 into my monitor HDMI --> DVI cable, and Red/White into the front RCA jacks of the Front Panel (Aux 2). As soon as I plugged in the cable, I got sound out of my speakers and was able to enjoy my PS3 in 720p
I put all of the components back into the case after cutting exhause and intake fan holes. I brought everything back to school, fired up the PC and PS3. Lo and behold, there is no more sound from the PS3. I know that PS3s are temperamental in moving, but I hooked the audio up to my TV and the sound came out just fine. The AD Ext cable looks like it's secure and in place. When I hooked up a mic and headphones to the front, they worked fine as well. However it seems to be just the AUX 2 RCA inputs that dont work anymore. Any ideas about how to fix this issue? Is there a function I have to turn on now in the software to allow sound to pass through? Any information would be wonderful!? I'm going to try an optical cable in the near future, just need to borrow one from a friend =/

Problem Solved.
I had moved my cards around for better airflow. I moved the SB Audigy card from the bottom PCI slot to the top. Thinking this might be the problem, I moved the video card back to the top slot PCI-E and the sound card to the bottom PCI slot. Sound is now working again. Thanks for the thread views?:smileytongue:
Think that when I have to buy Win 7 for real if the problem would still persist if I moved the card again? Or is this a hardware limitation?

Front panel audio problem Neo2 Platinum

Hi
I have a S775 915P Neo2 Platinum motherboard which I would like to connect to a Thermaltake Tsunami Case (front panel) but I don't know how to do this since the names on the cables from the case don't match the motherboard.
The cables from the case has the following names:
MIC VCC
MIC IN
RETURN L
RETURN R
EAR R
EAR L
GROUND
...and on the motherboard:
PORT 1L
GND
PORT 1R
PRESENCE#
PORT 2R
SENSE1_RETIRN
SENSE_SEND
KEY
PORT 2L
SENSE2_RETIRN
How do I connect theese?
Thanks!
//Thomas

Not the same MoBo, but maybe some of these links will help,
https://forum-en.msi.com/index.php?topic=72497.0
https://forum-en.msi.com/index.php?topic=62730.0
Personally I prefer USB in front and Audio back with a mediahub /adapter on the monitor.
Cheap, simple and functionally.

Midi in from front panel stopped working (x-fi platinum)

8midi in from front panel stopped working (x-fi platinum)" Not sure if I burned the connector or if something is wrong with the driver. My midikeyboard can't be used with sb x-fi platinum anymore.
I borrowed terratec soundcard from big brother a while and used my midikeybaord in with that and output with x-fi card. but now he's taken the terratec back.
and I'd like to really know what's wrong witht he midi in.
Does anyone know what might be the problem?
I have connected normal midi cable -> normalmidi to tiny x-fi port convertor -> front panel
This used to work a bunch of months ago.
i'm using winxp latest updates. i'm trying out reaper. I've got asio4all installed but i usually use directsound when I'm composing music.
tahnks for any help

i have the exact same problem with vista!!!no sound from the front panel of x-fi platinum!i don't know what to do!

No sound from headphone on X-Fi Platinum Front Panel

Hey,
i just built it a X-Fi Platinum installed the drivers and checked if everything works. My Problem is i dont get any sound out of the headphone jack at the Front Panel.
Headphone detection ist working as is the remote control.
Any ideas what could cause this? I need that 2nd audio output.

i have the exact same problem with vista!!!no sound from the front panel of x-fi platinum!i don't know what to do!

Front Panel Audio - P7N Sli Platinum Question

I am having trouble getting the front panel audio working - I want it set up so that when I plug my headphones in the speakers mute and the headphones take over.
I have the following:
Case - ThermalTake Armor VA8003BWS - http://www.thermaltake.com/product/Chassis/fulltower/armor/va8003bws.asp
MB - P7N SLi Platinum
Sound Card - Create Labs Xfi Gamer
I have done the following:
1. Disabled onboard audio in Bios (should I turn this back on?)
2. Went into Creative Console Launcher and checked the 2 options that I want it to automatically enable headphone settings and mute speakers when headphone jack is connected.
3. Connected 10 pin wire in case labeled (Azalia) to the motherboards Jaud1 (my MB manual says it is Azalia 1.0 compliant). The case also has an AC'97 connection (on the same wire as Azalia but I didn't use this because of what I read in MB manual about Azalia 1.0 compliant).
4. The case also came with this 10 pin black block that has all the Azalia descriptions on the side (Port 1 L, Port1 R, Port2 R, Sense_Send, etc. - I tried plugging the Azalia connector into this and then this into the Jaud1 but still nothing).
Not sure if it matters but my headphones are Plantronics Gaming Audio 770 (not USB).
Any suggestions?

Quote from: [LT]Eternalbliss on 21-June-08, 03:43:49
I've just recently had this similar problem. I think the issue in your case is step 3. I believe you should connect the Azalia 10pin wire to your X-fi card, not the mobo.
My problem was that i had connected AC97 10pin wire to my X-fi, after which plugging in my headphones didn't mute my speakers.
That was the problem - works great now! Thanks

Platinum XFI front panel problems. Vista

Similar Messages

Maybe you are looking for