Play a clip in full screen
I have a clip within an event that I want to play full screen - how do i do this?
It seem sthat whatever I do it always plays the entire event in full screen then i have to scroll through the menu bar that pops up to find the clip I want to play.
Is there a way to just play one clip in full screen?
If you hover over the clip and then hit command-G that seems to do it, but it's a pretty clumsy way. Anyone know of an easier way (or any other way) to play just one clip in an event?
Similar Messages
-
How do I play a video in full-screen mode on one screen of a dual-screen Windows 7 system without blanking out the other screen? Not losing the other screen would be useful as I would like to, for example, monitor my emails whilst watching a video or to work on a project whilst watching an instructional video.
Note : Resizing a window to fill the screen is not acceptable as it still leaves unsightly borders.bump
-
When I play an iMovie at full screen, how can I remove the bottom toolbar
When I play an iMovie at full screen, how can I remove the bottom toolbar? It shows up on the projector screen and I don't want my audience to see those tools at the bottom quarter of the screen.
Do a malware check with a few malware scan programs.
You need to use all programs because each detects different malware.
http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
http://www.superantispyware.com/ - SuperAntispyware
http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked -
Play a movie in full screen mode
Hi evrybody,
Plzz could anybody help me with codes to play a movie in full screen mode.
thanking u in anticipation.This question has been answered again in an old thread. Do search for it
-
Some sound in movie not playing when viewing in full screen
I have been editing a film for the past few days and I've regularly watched it back in full screen to see how it's coming along. Today however, I watched the film back and in some parts, the audio from some of the clips is very quiet. If I play back the video in the viewer however, the audio is fine and I can hear everything clearly, it only happens in full screen playback. I've tried closing and re-opening iMovie but this hasn't solved the problem.
Any ideas?Anyone?
-
How do I play iTunes TV shows full screen on a connected display?
I have connected my HDTV via DVI to HDMI cable and I want to play the TV shows I've dowloaded FULL SCREEN ON THE TV. When I selected full screen, it defaults to playing the show full screen on my macbook and not my TV. I just want to change it so that full screen happens on the TV, not the macbook. HELP!
You can mirror the displays as you said or just drag the iTunes window to the second display (TV). Then it will play in full screen only on the TV, however your computer screen will go black. Either way you will have no access to your iTunes controls.
If you want to use your computer while it is playing full screen on the TV, then use QuickTime Pro (not in mirror mode) and choose Present Movie, then click on the display you want it on (TV). -
Viewing clip in full screen mode
I have not figured out how to view a clip that I have imported into FCE in the full screen format like you can do in imovie. Anyone have any suggestions?
Thanks
TimHAThat solved the problem....thanks a lot!
TimHA -
How do I get the artwork of the now playing track to show full screen?
I've got iTunes 11 on Windows 7.
I'd like to leave the PC running and just see the artwork of the current track - preferably full screen.
Something similar to visualizer ... but with only the artwork instead of the psychedelic streamers.
This is basically what my Apple TV does with out thinking, but how can I do this on a PC?
All ideas that don't suggest going to a new platform welcome
Thanks.
KeithThanks so much for resonding. But the numbers are showing up for even those people who have been saved as contacts
-
Dear comunity I need urgent assistance with my imovie proyect
I have problems when I check my proyect in full screen it simply stops and aborts out of imovie, tells me that ocurred an error and asks me if I want to report to apple the error. But dont know if the problem is that I have too many resources in the proyect. Its long and has a lot of videos and music all the proyect, also it has about 20 min.
please help mePlease authorize ADE 3 with same credentials that you used with older version of ADE
-
Itunes store won't play movie trailers in full screen
By the way, i have new Mac Mini. when i select full screen arrows, it will only show plain /blank white screen with audio.
- My itunes store won't load at all, I just get the itunes store visual and loading bar at the top continues to run
- I also noticed that my help screen will not show...not a big issue but I felt that should be included
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
Hi
I have problems with my imovie 09. After several days of work with an imovie project I was again about to start editing my project after startup of my mac. I played through the project and everything seemed fine, but when a movie clip was moved infront of a still picture instead of after, the whole project became uneditable and unplayable. When trying to play the project in full screen mode a totally different project is played. Shutting Imovie and/or the mac down does not help. In some cases I have managed to get the red cursor moving along in my project. However, no movie is played in the screen in the right hand corner, -it is totally black, and the audio is again from a totally different project. I am not able to export the project as all the export options are grey. Some of the other projects worked fine and some did not, -and the functionality seemed a bit random from time to time after rebooting/ exiting and reentering imovie. My first guess would be that this is a memory porblem. However, looking at my activity monitor it seems that I'm only using 1.73 GB of system memory of a total of 4....I have tried remove old projects and also quite a bit of clips in my library to minimize memory use. Now it seems that all the rest of the projects are working fine, but my current project is still corrupt. I have tried copying the first clip of my project into a blank project, but it will only play in full screen mode, not in the screen in the right hand corner.
I am working on a mac mini with 2.26 Ghz intel Core 2 Duo, 4GB 1067 MHz DDR3.
I would be very grateful if anyone out there could help me out...Is my project totally corrupt beyond the point of no repair? Why has this happened, and how is it possible that something like this can happen without any kind of warning?
Thanks!Thanks for your reply AppleMan1958. Unforunately the playback problem was only experienced in the project described, - all other projects played fine....and I tried a lot of different ways to do it...so I really believe the whole project, including the playback (which did not work in the editing window in the right hand corner either, -nothing was shown there and the red marker line would not move across the project) just suddenly become totally corrupt...However, after deleting the project as described above and installing imovie11 I have done the whole thing over again and completed the project without problems this time.
But thanks for the tip anyway! -
IMovie won't show some of my clips in the full screen preview?
So I spent a lot of time working on a music video I recorded in my iPhone, I put it all together and added effets and everthing.
The small preview on iMovie 11 showd my whole movie the whole time, but when I went to play it on the full screen preview, almost a whole minute of different clips just wouldn't show up and turned black! -___-
But I thought the full screen preview was juat being wierd so I saved in in HD, and I went back to play it and it did the same thing ! But it still plays on the small preview on iMovie to this very second.. i just don't understand. Is it just my friday the 13th luck?
Please let me know if this is happening to you or you know how to solve this ! all help is appriciatedYes! I created a project from a trailer. I finalized then went and changed some things. After finalizing again the small preview shows the full trailer but the preview and all exported movies are blank for the first 10 seconds or so. Frustrating!
-
Audio is fine in project screen play back but when full screen playback is used the audio is lost from alternating clips. This carries over to the exported file/final version. This is my 1st time using I movie.
Hey did you find any solutions? I'm running into the same problems, would appreciate feedback and possible ways to fix this problem?
Thanks! -
Flash Player doesn't play smoothly and out of sync in full screen
Hello! Everyone
The flash player (11.2.202.235) does not play smoothly and in full screen audio and vidoe is out of sync. I didn't use to have any problem at all, it only started about two weeks ago and since then despite trying various things (i.e. disabling hardware excelration, uninstalling & reinstalling, trying various browsers etc.) has not resolved the issue. I don't know why it has suddenly stopped playing smoothly as I have not installed any software recently which might have cuased this.
I am using Windows XP (service pack3) and have dual partion with dual operating system (both XP). There is the same problem on both operarting system and flash player won't run smoothly on either of them. Although my computer and graphics card is quite old but the downloaded movies/DVD playback is fine even in full screen. It runs smoothly and audio&video is in sync so I don't think it could my the graphics card.
As I mentioned I have tried all the browsers but without any luck. The BBC iplayer plays ok most of the time if not in full screen but as soon as you make it full screen the vidoe is more like a slide show and very jittery and audio&video gets out of sync. Same with youtube vidoes, they play ok when not in full screen but the video in full screen does not play smoothly and audio&vidoes gets out of sync. However the ITV player & Channel 4 content on 4OD does not even play smoothly when not in full screen and the video&audio is out of sync all the time.
It would be really helpful if anyone can suggest anything to resolve this issue as I have not been able to find anything on the internet to solve the problem and its driving me up the wall. Although I have tried to include as much details as I could think of so please let me know if I have missed any details that could be crucial in order to identify the problem.
Thank you very much for reading this and taking the time to reply and your feedback.
Below is the DxDiag report for my laptop:
Time of this report: 4/22/2012, 00:15:58
Machine name: TIMES-LAPTOP
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.111025-1629)
Language: English (Regional Setting: English)
System Manufacturer: TimeComputers
System Model: VT8372
BIOS: Insyde Software MobilePRO BIOS Version 4.00.01
Processor: mobile AMD Athlon(tm) XP 2000+, MMX, 3DNow, ~1.7GHz
Memory: 1248MB RAM
Page File: 809MB used, 2790MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904) DX
Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
------------ DxDiag Notes ------------
DirectX Files Tab: No problems found.
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.
-------------------- DirectX Debug Levels --------------------
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
--------------- Display Devices ---------------
Card name: S3 Graphics ProSavageDDR
Manufacturer: S3 Graphics Co., Ltd.
Chip type: S3 ProSavage DDR
DAC type: S3 SDAC
Device Key: Enum\PCI\VEN_5333&DEV_8D04&SUBSYS_83751071&REV_00
Display Memory: 32.0 MB
Current Mode: 1024 x 768 (32 bit) (60Hz)
Monitor: Digital Flat Panel (1024x768) Monitor Max Res:
Driver Name: s3gnb.dll
Driver Version: 6.14.0010.0025 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 3/2/2004 14:02:26, 402048 bytes
WHQL Logo'd: Yes WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: s3gnbm.sys
Mini VDD Date: 3/2/2004 14:02:30, 167040 bytes
Device Identifier: {D7B75DD3-CE44-11CF-D873-7FA3A1C2CB35}
Vendor ID: 0x5333
Device ID: 0x8D04
SubSys ID: 0x83751071
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_C ModeMPEG2_A ModeMPEG2_D
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled DDraw
Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
------------- Sound Devices -------------
Description: Vinyl AC'97 Audio (WAVE)
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1106&DEV_3059&SUBSYS_83751071&REV_50
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: vinyl97.sys
Driver Version: 6.14.0001.4170 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 8/10/2006 07:32:14, 204672 bytes
Other Files:
Driver Provider: VIA Technologies, Inc.
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 8000, 48000 Static/Strm
HW Mix Bufs: 1, 0 Static/Strm
HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No EAX(tm) 2.0
Listen/Src: No, No I3DL2(tm)
Listen/Src: No, No Sensaura(tm)
ZoomFX(tm): No
Registry: OK
Sound Test Result: Not run
--------------------- Sound Capture Devices ---------------------
Description: Vinyl AC'97 Audio (WAVE)
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: vinyl97.sys
Driver Version: 6.14.0001.4170 (English)
Driver Attributes: Final Retail
Date and Size: 8/10/2006 07:32:14, 204672 bytes
Cap Flags: 0x41
Format Flags: 0xFFF
----------- DirectMusic -----------
DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
DLS Version: 1.00.0016.0002
Acceleration: n/a
Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
Vinyl AC'97 Audio (WAVE), Software (Kernel Mode), Output, DLS, Internal
Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Registry: OK
Test Result: Not run
------------------- DirectInput Devices -------------------
Device Name: Mouse
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Keyboard
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Poll w/ Interrupt: No
Registry: OK
----------- USB Devices -----------
+ USB Root Hub |
Vendor/Product ID: 0x1106, 0x3038 |
Matching Device ID: usb\root_hub |
Service: usbhub |
Driver: usbhub.sys, 4/13/2008 19:45:37, 59520 bytes |
Driver: usbd.sys, 8/23/2001 13:00:00, 4736 bytesWould you mind opening a new bug on this at bugbase.adobe.com? Please include your dxdiag report, a specific URL and a link to this forum thread.
In the meantime, you might want to try our 11.3 beta or rollback to a previous version of the player to see if that resolves the problem.
Thanks,
Chris -
Dvd player wont play in full screen
Hello im using 10.5.5 and when I try to play a dvd in full screen it plays it for a while and then half the screen goes black and I can only see half of the movie, it was working fine before i updated to 10.5.5 any ideas howto solve this problem please ??/
StevoSr wrote:
OS Lion - DVD player goes full screen when I insert a dvd and it never plays. I just shows the beechball spinning and can't get out of it unless is hit the power buttone ...
I think DVD Player has some problems in 10.7.0. I can play DVDs but get the same symptoms as you as soon as I try to fast forward or similar. I think we need to wait for 10.7.1 for a fix. You could try VLC if you desperately need to play DVDs in the meantime.
BTW, you can get out of DVD player by using Command-Option (Alt)-Escape together, then clicking DVD Player and Force Quit on the window that appears.
Maybe you are looking for
-
I PURCHASED AN APPLICATION FROM APPLE STORE. AN ERROR OCCURRED WHILST DOWNLOADING IT. IT WANTS ME TO REVERT BACK TO PURCHASES IN ITUNES, AS SOON AS I TAP ON "INSTALL" IT SHOWS THE SAME MESSAGE AGAIN. HOW DO I SOLVE IT PLEASE? IT SHOWS ON MY STATEMENT
-
ACS IS WORKING, BUT NOT THE WEB GUI
I have an ACS ver 5.4.0.46.7 running on an applicance, ACS-1121-K9. After rebooting a Win2008-controller it stopped working and someone in my Department rebooted the ACS. It looks like the authentications are working now, but I can't Access the web g
-
New favicon will not display in Firefox, but does display in Safari
I am working on a new website and uploaded the favicon.ico into the root folder (Go Daddy). The favicon appears when I use Safari, not does not appear in Firefox... I have a mac OSX version 10.5 I have cleared the history and cache too. Any thoughts?
-
After effects annual subscription problem.
Hy, two days ago i've changed my subscription to single product user "after effects" to annual subscription to adobe creative cloud . Now, i've already downloaded after effects cc and now when i open the program it tells me to do another subscription
-
Aperture shuts down when switching program
Hello, For no obvious reason Aperture shuts down whenever I switch to another program such as Safari. What can I do? Thanks, Matt