Play and Stop with Spacebar not working in newly updated Premiere CC

Tried on two different machines (iMac and MacPro) in last 24 hours. Audio also goes out randomly

Have not connected any external audio devices. The audio dropout seems to be a common problem according to other staff and users on the forums, with no real solution. The spacebar not working is a new issue though that just started once I updated yesterday on two different machines, both on OSX 10.9.4

Similar Messages

The forward, back, refresh, and stop buttons are not working. Even after installing the latest version. Anyone else having this issue?

The forward, back, refresh, and stop buttons are not working. Even after installing the latest Firefox update. Also my home page stopped loading upon startup even tho I have it setup to do so. Anyone else experiencing these issues? This is my second request for help and of course, Firefox on-line support is always closed.

Those are all symptoms of a problem with the places.sqlite file, for details see http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

Myi iphone4 microphone not working and the home button not work after IOS6 updat

Myi iphone4 microphone not working and the home button not work after IOS6 updat

Did you try another restore and this time not to restore from a backup and see if that makes a difference? This is what Apple would tell you to do next based on my iphone 5 fiasco.
Make sure all your data is available on your computer for manual syncing later.
Since you did the hard reset I assume that means your home button isn't broken only that it got frozen before. Were you able to get the Apple logo after the reset? Did it boot?
And you are using iTunes 10.7?
I'm just trying to help get you going.

Teamspeak 3 and PulseAudio with ALSA, not working

Hello!
When I run Teamspeak 3 and connect to a server, alternatively try "Play Test Sound" in Playback section of settings, it automatically stops sound output from both MPD and MPV.
However, when I run only MPD and MPV I can lower/higher volume & mute without it effecting eachother, this brings me to a (maybe false?) conclusion that PulseAudio is working. Only not with Ts3.
In Teamspeak I've adjusted the Playback Mode to PulseAudio and have Playback Device put to Default.
#/etc/asound.conf
# Use PulseAudio by default
pcm.!default {
type pulse
fallback "sysdefault"
hint {
show on
description "Default ALSA Output (currently PulseAudio Sound Server)"
ctl.!default {
type pulse
fallback "sysdefault"
#.config/mpd/mpd.conf
# Required files
db_file "~/.config/mpd/database"
log_file "~/.config/mpd/log"
# Optional
music_directory "~/music"
playlist_directory "~/.config/mpd/playlists"
pid_file "~/.config/mpd/pid"
state_file "~/.config/mpd/state"
sticker_file "~/.config/mpd/sticker.sql"
restore_paused "yes"
audio_output {
type "pulse"
name "MPD PulseAudio Output"
# sink "your-sink-name-here"
#.mpv/mpv.conf
# Write your default config options here!
# default configuration that applies to every file
[default]
# try to use high quality opengl output, with standard opengl, classic xv, and wayland as fallbacks
# note: opengl has numerous quality/performance trade-off options.
# as per the mpv(1), "opengl-hq" is just an alias for "opengl:lscale=lanczos2:dither-depth=auto:fbo-format=rgb16"
vo=opengl-hq,opengl,xv,wayland
# use alsa for audio output, choose pulse, or oss4 as fallback
ao=pulse
# prefer using 5.1 channels audio (defaults to 2 - see mpv --channels=help)
# mixing is handled by libavcodec unless using "--af-add=pan" (see below)
channels=5.1
# scale the subtitles to the 3% of the screen size
sub-scale=3
# set the window title using the media filename (see Property Expansion section of mpv(1))
title="${filename}"
# add black borders so the movies have the same aspect ratio of the monitor
# for wide screen monitors
vf=expand=::::1:16/9:16
# for non wide screen traditional monitors, alternative to the above item
#vf=expand=::::1:4/3:16
# disable screensaver
stop-screensaver="yes"
# execute a command every 30 seconds
# useful to disable a non-standard-compliant screensavers and to work around buggy behaviours
# BE WARNED: to avoid dangerous commands is your responsibility
#heartbeat-cmd="xscreensaver-command -deactivate &" # stop xscreensaver
# custom heartbeat frequency in seconds
#heartbeat-interval=600
# correct pitch when speed is faster or slower than 1.0
af=scaletempo
# allow to seek in a file which is still downloading whilst watching it
# from manpage:"this switch has no effect in the typical case" (usually done automatically by demuxers)
# idx=yes
# allow to increase the maximal volume to 600%
#softvol-max=600
# skip displaying some frames to maintain A/V sync on slow systems
framedrop=yes
# profile for up-mixing two channels audio to six channels
# use --profile 2chto6ch to activate
[2chto6ch]
af-add=pan=6:1:0:.4:0:.6:2:0:1:0:.4:.6:2
# profile to down-mixing six channels audio to two channels
# use --profile 6chto2ch to activate
[6chto2ch]
af-add=pan=2:0.7:0:0:0.7:0.5:0:0:0.5:0.6:0.6:0:0
Sooo, someone has a clue to whats up?
Last edited by redot (2014-02-12 16:37:21)

Hi,
Did you use Group Policy to map drive or map drive manually? Can you access the network share? Please check if the user have share permission on the network share.
Best practices for basic NTFS permissions on a share
http://social.technet.microsoft.com/Forums/windowsserver/en-US/c6242159-d15d-417e-91f8-eb19c0da3a35/best-practices-for-basic-ntfs-permissions-on-a-share
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Automatic update of RemoteApp and Desktop Connections does not work (while manual updates with "update now" is working)

Hello,
on several Windows 7 Clients the update/refresh of the RemoteApp and Desktop Connections stopped not working automatically. There is a Update failed error. When we do an "Update Now" manually, it gets synchronized without problems.
I am asking me if there is an issue with a stored Password as we Need to Change the Passwords regularily. The error is occuring for Connections to all RDS Servers (we have severals).
Does Windows store the user Password in the Task Scheduler? If yes, does the schedule Task Password Change automatically after the Domain Password Change?
Or what else could be the issue? The RDS Server and the certificate (Name the same as the URL) seems to be fine as not all Clients have this issue.
Thank you for your help

Hi,
Thank you for posting in Windows Server Forum.
By default it will automatically update the RemoteApp and Desktop Connections but if in any particular case it’s not happening then for a try you can restart the server and check the result again. In addition you can try running below command and check
the result.
Start-Process rundll32 -ArgumentList "tsworkspace,TaskUpdateWorkspaces2
More information:
Powershell to update "RemoteApp and Desktop Connections"
If a task is registered using the Administrators group for the security context of the task, then you must also make sure the Run with highest privileges check box is checked if you want to run the task. Please check “Task
Security Context” for more details.
Hope it helps!
Thanks,
Dharmesh

My play and skip button will not work on the control center and lock screen

For the first few days I had iOS 7, everything worked fine. Now the Control Center and lock screen will not play, pause, or skip through my music or iTunes Radio. It works fine within music but I would prefer not to have to unlock my phone every time I want to skip a song. Anyone having this issue/know of a way to fix it?

I didn't have that problem, but I had many others. I've always been a fan of Apple but I'm really disappointed with the latest updates. iOS 7 is full of bugs, the worst being in my music app. It crashes, both in my iPhone 5 and iPad 4, it keeps autosyncings songs from the cloud I don't want (and I can't get them erased), plays a song, but shows a different song, to name just a few... I hope they fix this asap, cause that's really annoying me.

Black and White With Color Not Working

I am trying to have the background of my image black and white with the person in color. I turned black and white on then tried brushing black and white away from the person. Instead of the full, vibrant color coming back it was a dull color. Instead, I tried turning black and white off then brushing black and white into the background. This time, instead of being pure black and white it was black and white with an obvious hint of color. I have watched plenty of tutorials and know that it is possible to have it be pure black and white in the background with the person in front appearing in full vibrant color. I just don't know what I am doing wrong that either my vibrant color is looking washed out in one method or my black and white isn't pure black and white in the other method. When I first turn black and white on the image does go to pure black and white. Any suggestions?

See what happens after re-booting.
Is "Brush Range" set to "All"?
Try the same adjustments on another Image.
Try the "Color Monochrome" adjustment and see if it works as expected when brushed in/brushed away.
Message was edited by: Kirby Krieger -- added a line.

IMessage search and Spotlight message search not working since ios8 update

Since updating to iOS 8, iMessage search is not working anymore. Also spotlight search is not searching the messages. I am on iphone 5. Anyone else with this problem? Thanks

Hi there Hyndisa,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Troubleshooting FaceTime and iMessage activation
-Griff W.

Youtube videos do not play and gchat sounds do not work

These problems are only in Firefox. Allow me to elaborate.
I have a Windows 7 64-bit laptop, Firefox 13.0 and the latest Adobe Flash Player installed. What's strange is that I think the videos worked fine two or three days ago, but now the videos don't work. I thought this was a minor glitch, then I noticed that I wasn't getting chat notification sounds on gchat in Firefox. So I went in the settings and it said that sounds were linked to Flash player. I looked up Flash player and installed the latest one, still no change. I then uninstalled flash player and reinstalled. Still, no dice.
The youtube video problem is rather strange; I've never seen it before. The black box appears, and below it are the normal volume controls, video controls, play, etc. Inside the black box is the play button, with the white triangle in a red box pointing to the right. Like I said, I've never seen this before, so I decided to click it since my videos weren't playing. I click it, and all I get is "An error occurred. Please try again later". I do the normal clear cache/cookies, restart browser, still no dice.
Everything works fine in google chrome. It's just firefox that's giving me these problems. If anyone has suggestions, please let me know!
Thanks in advance.
Edit: oh, and on the adobe page where you can test to see if your adobe flash player is working, all I get is blank spaces where the video or animation is supposed to be. Facebook sounds seem to work too. But in Tetris battle, I get "Errors on Loading File: Facebookmainframe.swf. Retry..."

I too have the same issue with Firefox and flash videos. I haven't tried to use other browser yet, but I will when I finish this. I first saw this yesterday with Firefox 12.0; same issue with FF 13.0 now. No video anywhere will play, from YouTube to TMZ! I either get an error "error occurred try again later", or the area on the page where the video should be is blank. I have uninstalled and reinstalled all Adobe items several times. Control Panel says they are installed and Flash Manager in CP is OK, but when I go ONLINE to verify or check version, the page is blank. Likewise is the Online Flash Settings Manager. I have tried flushing FF cache, cookies, reset and Safe Mode - all yields zip! It all worked Ok last week. This is just starting either today or last day or so. The ONLY possible cause that I can find is that Windows published about 25 "security" and "NET Framework" updates on June 12, 13, and 14. I suspect the cause might lie there. Last time I check with forums over 500 people were looking for solution to this issue and that number is just in last 24 and it's steadily climbing. I think this is pretty pandemic for Firefox and Flash whatever the cause. If it isn't fixed it will KILL Firefox (maybe that's somebody's goal? - I can see Microsoft/Windows doing something like that to remove competition with their IE browser!).
I tried to talk to Adobe Tech about it, but got stone walled. I posted on Firefox forum, but got nothing back that was useful. Like most I am running Win 7 HP x64. I am also using Norton 360 and have set the Firewall there to FULL ALLOW for all Adobe and even tried turning it OFF for a while with no luck.
At this point, I am fully lost. I have flushed, deleted, reinstalled, updated, disabled, verified, tested, safe moded and God knows what else all without any luck. I guess I am going to start using Chrome; I really hate IE9. (Sorry, Microsoft, suck a big one ) . I am @OldeGreyWoolf on Twitter; if you find a solution, please drop me a tweet! I'll do the same! By tomorrow, I figure there will be thousands of users in this same box. Maybe then someone, some where will come up with a solution! Feel free to copy and paste this post any where/every where.
Bob Woolf, aka the OldeGreyWoolf

My adobe flash play and adobe reader will not work!

I can not get my adobe flash player or my adobe reader to work. I have reinstalled the software multiply times I have complete deleted all traces of the software and downloaded the newest version countless times. I even updated my IOS to Mountain Lion 10.8.2 to try and fix this problem. Nothing has worked. I cant download PDFs onto my computer and vertually no videos work online. How can I fix this???

From the Safari menu bar, select
Safari ▹ Preferences ▹ Security
and check the box labeled Enable plug-ins.

OK - I just did the update and now when I bring up a second screen the Back Page, Reload and Stop loading does not work. So I guess I'll install the previous version. Anyone else having this problem?

It's version 3.6.12. Anyone else having this problem?

You have to download and run the upgrader then launch iPhoto. Go to the utilities folder in Applications and launch the iPhoto upgrader. Then launch iPhoto and it will upgrade the library
LN

ICloud and Photos app are not working anymore after updating iOS 8.0.2 !!!

I've just upgraded iOS 8.0.2 with .ipsw file. It asked for my iCloud password in Set Up. It says it's wrong. So i skipped it.
I tap iPhoto and it tells me to marge the photos to Photos app. It was going fine and then suddenly, it closed. Now i can't open the Photos app anymore. I've rebooted and deleted iPhoto app. I can't even open through Camera.
I can't see my profile in iCloud (in Settings). It's keeping me the password. Its still wrong. I can't even turn off Find My iPhone to restore my iPhone. It says verification failed.
I don't know what to do anymore. I still can use my iCloud on my Computer. I still can use everything and everywhere except on my iPhone.

You are not alone. I got that issue also. I always reboot my phone or reset the network setting but it only work for a few hours.

Arrow key and space bar do not work scrolling in PDF document with film file?

I have made a single PDF file from 26 different InDesign files, first exported to PDF:s. Text and photos. One of the documents contain a film file (.mov). As I scroll through the documents in full screen mode, once I start to play and stop the film I can no longer use the spacebar nor right arrow key to get to the next document. Only mouse works.
Adobe 11.0.10 MBP with Yosemite.
Many thanks for input!
/Ivar

Hi Melfour-
Here is a Support article detailing how to work with your Firefox PDF preferences:
[[Opening PDF files within Firefox]]
Hope that helps.

TA44551 My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work.

My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?

- After charging for 1/2 hour or so, does iTunes see the iPod? If yes, restore the iPod from backup.
- If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

Keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work! I am running windows 8 (which it has worked with ok before) - struggling :(

keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work! I am running windows 8 (which it has worked with ok before) - struggling
I recently bought some new albums and can't play them on my ipod

I just encountered the same problem on my 2 month old MBPro. I found a work around by changing USB ports. As for the actual cause or the reason why that worked, I dont know. The USB port I was using works fine with my phone or other USB devices.

Play and Stop with Spacebar not working in newly updated Premiere CC

Similar Messages

Maybe you are looking for