Play Audio through ATV with my HDTV off?

I've searched the threads without too much luck on this topic. I don't have an ATV yet, but I plan to run an HDMI cable from the ATV to my TV. I also plan to run a toslink optical audio cable from the ATV to an available input on my stereo receiver.
Can someone confirm if I can kick off a playlist from ATV on my HDTV, but then shut the darned TV off and listen to the music through my receiver? I don't want to needlessly burn my TV out when I just want to listen to tunes.
Thanks for your help.

It works. I use optical digital to my Yamaha and turn off my HDMI connected Toshiba. I've even sent Apple a suggestion that they should support a remote control sequence that justs starts a shuffle play without the need to turn on the monitor to go through menus.
BTW, if you always leave the TV in the same menu state when you put it in standby then just entering the remote buttons as if you were seeing the menu on the monitor does work, without actually turning the monitor on.
Message was edited by: xnav

Similar Messages

Can I use Optical Audio alongside a speakerless monitor to play audio through speakers?

I have an Apple TV 3 and so far I am relatively pleased. However.. I have no sound, this just about renders my Apple TV useless. Is it possible to use the Optical Audio cable to play sound from films, music etc. while still having the Apple TV connected to the Monitor via HDMI? Do you have any suggestions as to what speakers would be good? (looking at around £50 - £100) I was thinking of getting some of the Bose Companion 2 monitor speakers and then using a DAC to play audio from the Apple TV to the speakers. Would this work? If not, does anybody have any other suggestions?
P.S. I can't plug speakers into my monitor for some absurd, annoying reason unbeknown to society

My ATV is connected to the tv with hdmi
My optical is connected to my stereo
I mute my tv and only play out of the stereo

Hp Pavilion dv7 won't play audio through HDMI

Hi i recently noticed my Pavilion dv7 entertainment notebook won't play sound through the tv anymore. The picture is on the tv but sound is running through the laptop speakers? I never had a problem with this until now. When i open up the sound options, the ATI HDMI output says it's not connected and so it wont let me select it, but it is connected? Please help?
Kind regards, Sez.
This question was solved.
View Solution.

Hi Sez,
Try using Recovery Manager to reinstall your AMD Graphics Driver package as this will also reinstall the AMD HDMI Audio driver- the procedure for using recovery manager to reinstall Software and Drivers is detailed in the relevant document on the link below.
Recovery Manager - Windows 8.
Recovery Manager - Windows 7
Recovery Manager - Windows Vista
After the reinstallation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Flash Player 10 is not playing audio from Youtube with Vista and IE

Since installing FP10, I cannot get audio when playing YouTube video. I'm running Vista with SP2 and IE on an HP laptop. Flash 0 on my XP desktop plays audio fine, so I'm guessing its a setting on my laptop which needs changing back to what it was before the upgrade to FP10...any ideas please? I have uninstalled and the reinstalled FP10 as per other posts on this forum, but no success.

I too am experiencing this
[edit]
My problem was that I was not getting flash audio at all, including local publishes out of the IDE. The problem was that my Windows Audio service had stopped (for some reason).
To check :
(classic view) :: Start > Settings > Control Panel > Administrative Tools > Services >
(non-classic) :: Computer (right click) > Manage > Services and Applications > services >
(one of the above, then) :: [scroll down to 'Windows Audio'] > r-click 'properties', general tab, set the start-up type to manual (in the dropdown), and click the start button on the next line.

Play music through computer with out itues

i just got my finance a 1gig nano for her birthday and we loaded songs on the ipod at home. now she wants to play her music at work through her work computer. she is not allowed to load software on her computer at work, so she cant load itues on it. is there anyway to play the music through the computer without using itunes?
thanks in advance.

I'm afraid not, you need iTunes to access the iPod so you can play it through the computer. If there is no iTunes installed the iPod will only charger from the USB port though you could play it through earphones while it's charging.

Connected Digital AV Adapter to HDMI HD TV. Photo slideshow works fine but cannot play iTunes playlist concurrently (with sound turned off on slideshow)

Connected Digital AV Adapter from my iPad (64 GB 4G) to my HD TV. Tried playing slideshow (with sound off) concurrently with playing iTunes playlist. Video plays fine but no audio. iTunes volume indicator not showing any volume.

Just following-up on this posting from a week or two ago and another a few days later about the problems with catch-up TV. We were disappointed with the lack of service, but as we can get most of the catch-up we want on the Sony Bravia TV, hadn't pursued it with BT perhaps hoping things would improve.
Got a phone call last week from BT asking if we'd been able to set up the YouView Box OK, which we had. Mentioned the unsatisfactory service. She immediately put me through to the BT technical call centre in India where I spoke to guy called Rajiv or something like that. Asked a few questions and then asked me to switch off the YouView Box (back panel switch) and do a hard-reset on the Homehub Router. Once this had been done, and the YouView box switched back on. The service ran fine and has done so since. I don't know if Rajiv did anything in the network or whether this is just some problem (he called it a "glitch") in the router/YouView box. Funny that that the speedtest and streaming to the Sony TV works OK.
He phoned back a couple of days later to see if we'd had any further problems. Overall good service. It would be interesting to know from a technical point of view what the problem was and how it was solved. It shouldn't be necessary to reset boxes in this way.

Captured video only plays audio through one speaker

I captured video from a mini dv and when I play the clip in FCP the audio only plays out of one speaker and it only shows on one audio meter in FCP. I captured this video with a DSR-20 and it displayed NS Audio on the screen. Both meters were playing on the deck and in FCP while previewing and also through my headphones. Does anyone know what I need to do this to correct this?

First I'd verify how the audio was captured. Did you have it set for Ch 1 + Ch 2, or Stereo, or Ch 1 [only], or Ch 2 [only] or as a mono mix?
Next, verify that you actually had two channels of audio on the tape, not just one channel.
Assuming that there are two channels on the tape, load the captured clip into the Viewer and see if there is an audio waveform on both channels. If there is, check to see if both channels are panned the same - if they are, pan one left and one right or both to center.
If there were no waveforms on one of the channels, try capturing a short segment of the same tape using another Firewire cable.
-DH

[Solved] ALSA - Play Audio As Is With No Conversion

Hello all,
I have an issue with ALSA I hope you can help me sort out.
For the sake of this post, I'll refer to everything as if played by mplayer2, since the output is much easier this way.
Basically, I want to play everything "as-is", in regards to samplerate and format.
That is, playing music at 16bit/44.1Khz as such, playing movie audio at 16bit/48Khz as such, playing HD audio at 24bit/96Khz as such and so on.
Now, my first attempt was trying to access the HW directly using mplayer's --ao=alsa:device=hw=0.0 and not limiting the format.
Both samples played at correct sample rate but were outputted at 16 bit, since the hardware supposedly do not support floating point, and the output reverted to default.
Selected audio codec: FLAC (Free Lossless Audio Codec) [libavcodec]
AUDIO: 44100 Hz, 2 ch, s16le, 0.0 kbit/0.00% (ratio: 0->176400)
[AO_ALSA] Format floatle is not supported by hardware, trying default.
AO: [alsa] 44100Hz 2ch s16le (2 bytes per sample)
Selected audio codec: Uncompressed PCM [pcm]
AUDIO: 96000 Hz, 2 ch, s24be, 4608.0 kbit/100.00% (ratio: 576000->576000)
[AO_ALSA] Format floatle is not supported by hardware, trying default.
AO: [alsa] 96000Hz 2ch s16le (2 bytes per sample)
Note the Format floatle is not supported by hardware part.
This seemed a bit weird as using alsa without accessing the hardware directly (going through vmix), the output is indeed floating point.
That is, playing with --ao=alsa I get the following (obviously everything is sampled to the default 48Khz):
Selected audio codec: FLAC (Free Lossless Audio Codec) [libavcodec]
AUDIO: 44100 Hz, 2 ch, s16le, 0.0 kbit/0.00% (ratio: 0->176400)
AO: [alsa] 48000Hz 2ch floatle (4 bytes per sample)
Selected audio codec: Uncompressed PCM [pcm]
AUDIO: 96000 Hz, 2 ch, s24be, 4608.0 kbit/100.00% (ratio: 576000->576000)
AO: [alsa] 48000Hz 2ch floatle (4 bytes per sample)
Note that the output format is floatle.
So, I tried specifying --ao=alsa:device=hw=0.0 --format=floatle, only for it to fail as in the first case and reverting to default 16 bit and correct sample rate.
Specifying the required format directly works for the flac sample (s16le, same as the default) but fails for the HD sample (s24be), as expected - I can remember from my Windows days not so long ago I had to output 24 bit audio padded as 32 bit for it to work.
This lead me to my next attempt: --ao=alsa:device=hw=0.0 --format=s32le, which as far as I understand is 32 bit, but not floating point, which isn't exactly what I need.
Anyway, both files played fine with this mode for the few seconds I tried (assuming the remaining bits were padded with zeros), but real-life files (such as movie soundtrack) produced noticeable audio distortions (cracks and pops of all kinds).
So, I'm back to where I began.
Seems like I need to specify the hardware (device=..._) to get correct sample rate, but then I can't get correct format, or let it go via dmix and then the sample rate is wrong.
Now, having giving it a bit more thought, I realized dmix is outputting anything successfully as floating point, so I guess it pads whatever bits needed with zeros, which is just fine.
Assuming the above is correct, is it possible to write something in my .asoundrc file so that input samplerate is preserved?
I'm not very optimistic as it kind of against the whole idea of software mixing, but who knows..
If there's any way of convincing ALSA that my card is perfectly fine when being fed with floating point directly (device=...), that's an option too.
Bottom line, is there a way to make everything sent to card as-is?
That was long... sorry
Thanks, Adam.
Last edited by adam777 (2012-10-03 07:45:17)

adam777 wrote:
Hello all,
I have an issue with ALSA I hope you can help me sort out.
For the sake of this post, I'll refer to everything as if played by mplayer2, since the output is much easier this way.
Basically, I want to play everything "as-is", in regards to samplerate and format.
That is, playing music at 16bit/44.1Khz as such, playing movie audio at 16bit/48Khz as such, playing HD audio at 24bit/96Khz as such and so on.
Sounds reasonable...
adam777 wrote:
Now, my first attempt was trying to access the HW directly using mplayer's --ao=alsa:device=hw=0.0 and not limiting the format.
Both samples played at correct sample rate but were outputted at 16 bit, since the hardware supposedly do not support floating point, and the output reverted to default.
Note the Format floatle is not supported by hardware part.
This seemed a bit weird as using alsa without accessing the hardware directly (going through vmix), the output is indeed floating point.
So yes, your hardware doesn't support floating point. Don't compare the hw device to the more higher level interfaces (default,surround,plughw). The higher level interfaces provide additional sample formats which will be converted on the fly to the specific hw device capabilities.
adam777 wrote:Bottom line, is there a way to make everything sent to card as-is?
That would depend on the input format. Even some 24bit audio files may need some additional padding. If you want to know what your card supports, compile and run the following program: http://www.volkerschatz.com/noise/alsacap.c.
For example, this the output on my machine:
Card 0, ID `Intel', name `HDA Intel'
Device 0, ID `ALC268 Analog', name `ALC268 Analog', 1 subdevices (1 available)
2 channels, sampling rate 44100..192000 Hz
Sample formats: S16_LE, S32_LE
Subdevice 0, name `subdevice #0'
Last edited by GogglesGuy (2012-10-02 03:09:43)

MBP 13 (mid-late 2010) still won't play audio through HDMI

I would like to connect the MBP 13" I bought in 12/2010 to my HP w2408h 24" monitor through HDMI, both audio and video. I bought a Moshi mini-DP to HDMI adaptor, and hooked everything up like I was supposed to.
When I go to System Preferences > Sound to try to select HDMI as the audio out, it tells me that "The selected device has no output controls." Mind you, I've tried three different HDMI cables, including the Vizio cable I just bought (with gold-plated connectors, natch!). Furthermore, when I try to run audio from the MBP's headphone jack to the monitor's audio in port, there's nothing there!
FWIW I'm running 10.6.6, and didn't try this set up before I upgraded from 10.6.5
What to do? Please advise.
Message was edited by: Pesachyonah

Mind the bump, but I'm having this exact same problem and nothing I try is helping.
I have a mid-2010 MBP, so I know it supports audio. The video works just fine, but when I open up the sound and change the output setting to my tv, it also says, "The selected device has no output controls." But I KNOW that the cable and my laptop work with the audio, because I can play the sound effects under the sound preferences through my tv speakers, but nothing else. Which is REALLY confusing. There's some static coming from my tv speakers, but that's it.
If it matters I'm running 10.8.2.
Help please, and thanks in advance!
Edit... So apparently iTunes works just fine as well. WHY can't I play anything from Chrome? Ugh.
Message was edited by: hillary5892

No sound when playing music through dock with third party apps

Hello,
When I try to play music on my Iphone (3G, OS 3) through dock connected external speaker devices (like the B&W Zeppelin) using third party apps, i get no sound at all. Example of external third party apps are : wifi radios, alarm-clock programs, video viewers,...
So i get no sound at all through the dock connector using that kind of apps. Sound is ok only with Ipod, Itune (or other apple apps).
Has anyone encountered similar problems ? Any solution would be very much appreciated.
Thanks.

I have done that from the first day (contacting the makers of 3rd party apps)- They say they use standard components provided by Apple. So I would like to know if anybody has succeded in listening, for example, any internet radio app though a dock station connection (zeppelin, or whatever speaker system that is not using the jack), or is this functionnaly actually blocked by Apple.
Thanks for your answers.

+5W power consumption when playing audio on X201 with Linux

Hi folks!
My Thinkpad X201’s power consumption raises from ~10W to ~15W when playing any kind of audio under linux. This problem does not seem to be CPU-related (for example when streaming with pulseaudio over ethernet instead of playing directly on the X201 the power consumption does hardly increase) and does not occur under Windows. I’m using Fedora x86_64 16 with Kernel v3.2.1 but it also occured with a v3.2.1 vanilla kernel; Fedora 14 and 15; Ubuntu 11.10 and 12.04 and so on.
I’ve allready posted my problem several months ago here: http://forum.thinkpads.com/viewtopic.php?f=9&t=99246 but haven’t gotten any useful answers.
I measured power consumption with powertop but also confirmed with readings from /sys:
while true; do bc -l <<< "$(cat /sys/class/power_supply/BAT0/current_now)/10^6*$(cat /sys/class/power_supply/BAT0/voltage_now)/10^6"; sleep 1; done
The output of lspci -vvv:
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
Subsystem: Lenovo Device 215e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 43
Region 0: Memory at f2520000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0f00c Data: 41c1
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=02
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel
cat /proc/asound/card0/codec#0:
Codec: Conexant CX20585
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x14f15069
Subsystem Id: 0x17aa2155
Revision Id: 0x100302
No Modem Function Group found
Default PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=4, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Control: name="Master Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="CONEXANT Analog", type="Audio", device=0
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-Out vals: [0x3b 0x3b]
Converter: stream=8, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-Out vals: [0x3c 0x3c]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Control: name="Beep Playback Volume", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Control: name="Beep Playback Switch", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0
Amp-Out vals: [0x00]
Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Device: name="CONEXANT Analog", type="Audio", device=0
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
Amp-In vals: [0x81 0x81] [0x80 0x80] [0x81 0x81] [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17 0x18 0x23* 0x24
Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17* 0x18 0x23 0x24
Node 0x16 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17* 0x18 0x23 0x24
Node 0x17 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x02 0x02]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x1a 0x1b* 0x1d 0x1e
Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x1a* 0x1b 0x1d 0x1e
Node 0x19 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x042140f0: [Jack] HP Out at Ext Right
Conn = 1/8, Color = Green
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=37, enabled=1
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1a [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x00001324: IN Detect
Vref caps: HIZ 50 80
Pin Default 0x61a190f0: [N/A] Mic at Sep Rear
Conn = 1/8, Color = Pink
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=38, enabled=1
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x1b [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00011334: IN OUT EAPD Detect
Vref caps: HIZ 50 80
EAPD 0x2: EAPD
Pin Default 0x04a190f0: [Jack] Mic at Ext Right
Conn = 1/8, Color = Pink
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=38, enabled=1
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1c [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0x612140f0: [N/A] HP Out at Sep Rear
Conn = 1/8, Color = Green
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=37, enabled=1
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1d [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00010034: IN OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x601700f0: [N/A] Speaker at Sep N/A
Conn = Analog, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1e [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x00000024: IN Detect
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x1f [Pin Complex] wcaps 0x400501: Stereo
Pincap 0x00000010: OUT
Pin Default 0x901701f0: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 1
0x12
Node 0x21 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x22 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 1
0x21
Node 0x23 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x2f, mute=0
Amp-In vals: [0x02 0x02]
Pincap 0x00000020: IN
Pin Default 0x90a601f0: [Fixed] Mic at Int N/A
Conn = Digital, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x24 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Amp-In caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10 0x11
Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono
Is anyone able to confirm this problem or does anyone have a solution? I’m really desperate since I often use my Thinkpad as a big but wonderful portable music player (with headphones of course! Don’t want to annoy my fellow trainpassengers …).
Thanks in advance
Michael

Any updates on this?

HT204387 how get ipad 4 to play audio through my bluetooth headset?

my jabra bt2040 connects to my ipad 4 but I can not get the ipad audio to play through it?

You need a BT A2DP transmitter for the iPhone, such as this one:
http://mobile.brando.com.hk/proddetail.php?prodid=03476

Play Audio On Webpage With Button Click

Hello everyone. I'm new to Flash, so please bear with me.
I'm creating a language learning website, and wish to add
audio to it for all vocabulary words. I want the audio to be
compatible across browsers and simply play when a button is
clicked, without any controls or media players opening up.
From what I hear, it sounds like Flash is a good way to go
and would do the trick. It's just a matter of converting all the
mp3s to Flash. The mp3 file size is already relatively small (1-2
seconds in length each and about 30kb in size I believe).
How could I create a button that plays the mp3 when it is
clicked? I was
researching the topic and came across a few things.
What I am looking for is almost identical to this:
Site
demonstrating audio buttons
While I could jump right in and use her example, it doesn't
quite work. With hers, everything needs to be in different folders,
and I would need a different button - her's is a little big. I
can't put everything in different folders, because I will have
hundreds of audio files. It would be much easier to put them all in
an audio folder with different filenames.
I also was reading at another site that it deals with
Javascript controlling the Flash - when you click the button it
plays the swf file. Since I am very new to Flash, I'm not exactly
sure of what all it can and cannot do. The site also mentioned not
all browsers allow Javascript to control Flash files. Again,
however, I'm unsure of how accurate the information still remains.
The browsers were older versions, and they were talking about how
to do it in Flash 5 and Dreamweaver 4. Furthermore, the example
located at the above link does not use any Javascript.
Does anyone have any ideas on how I can do this? While I am
beginning to learn Flash, I doubt I will understand what to do all
on my own for a while, and I need to get the site finished as soon
as possible. The audio is practically all that is left before the
site launch. Like I said, I'm looking for a way to add audio to a
webpage, that is played (without media players opening up, etc)
with the push of a button, and also will load quickly, since there
were be about 20 audio files per page.

Here is some info on sound linkage, not sure if this is what
you want but its a start:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=15&catid=194&threadid =1208568

Getting audio through TV with Mini-display

I recently purchased and just received a mini display-to-HDMI cable for my MBP. I plugged it in and the video pops right up on the TV and everything works fine excpet the audio will only play through the computer's speakers or things hooked in through the computer. Is there a setting or something I'm missing? I've checked the cable and MBP model and both are audio compatible. Any help would be awesome!

If you go into system preferences, sound, select the output tab and click on your TV/Display name it should put the audio out through the TV.

Known issue: Cortana does not play audio through the default playback device (Windows 10 Insider Preview SDK and tools, April 2015 release)

When getting audio feedback from Cortana on a device with multiple playback endpoints (e.g., a device with a headset and an internal speaker), the playback may occur on the incorrect device. For example, Cortana may not send audio to the default device
after the default has been changed in the control panel.

There is no workaround for this issue.

Play Audio through ATV with my HDTV off?

Similar Messages

Maybe you are looking for