Play back respond timing problem in L8.0.1

My recent project is about 34 stereo audio tracks and 26~30 native plugins with it.
when I hit "playback" button,then logic will start running after a few milliseconds,not just hit and run..
is it a normal situation to dual G5 processor's loading ? or any tip can solve this problem?
my L 8.0.1 setting is:
I/O buffer size is set to 128( lower to 64 will get "system overload" message )
I/O safety buffer : uncheck
process butter range: medium
computer : G5 dual 2.5G/2G ram
project was located in second internal hard drive (7200rpm SATA II harddrive )
audio interface : Tascam FW-1884 (Firewire)
thanx for help
Message was edited by: jh.studio

In the page which displays as intended, the background colour is set in the table element:
bgcolor="#fffce1"
In the CSS "grid" version it is set in the inline CSS for the main div for the grid, and it is not at all the same:
background-color:#ffe
That is not the same colour.
This is a truncation bug -- as I recall; I no longer have access to the bug database to verify that -- where GoLive reduces the colour to the short form when it should not in layout grid colour settings. I *think* there may be some posts I made previously on this issue which would still turn up in a forum search; not sure.
1. Uncheck the background colour check box in the Layout Grid inspector to remove the colour.
2. Set the background colour for page instead of the layout grid.
If that isn't feasible, you can add an ID to the layout grid's div element and then use the CSS editor to set the background colour instead of the inspector. That will avoid the bug.
John

Similar Messages

Spry Image Slideshow with Filmstrip IE8 Play/Back/Forward Arrows Problem

Please help me. I'm using the Spry Image Slideshow with Filmstrip widget on my web page: http://new.radcal.com/accugold2.html#sensoroptabs. In Firefox, Safari, Internet Explorer 9 it displays properly but in Internet Explorer 8 the gray Play/Back/Forward Arrows automatically appear on the Viewport (main large slide area) when the page loads and they do not go away, ever. Whereas in the other browsers these arrows only show up when I move my mouse into the viewport area and go away as soon as I take my mouse off the viewport area.
I need the arrows to behave in IE8 like they do in IE9, Firefox, etc. I do not know javascript but I imagine there is some javascript code that could solve this problem. Does anyone know of a solution? Please help me...

At the top of your document you have
<html>

<head>
Add the DOCTYPE as follows
<!DOCTYPE HTML>
<html>

<head>
Without a DOCTYPE on the very first line of the document, IE goes into Quirks Mode
Gramps
PS Normally I do not monitor this forum, hence this reply after having received your PM

Play back quality

Hi
When I burn a dvd it plays back with no problems on my mac but on my set top dvd it seems to jitter and shimmer.
suggestions appreciated.
Thanks.
Trevor

The following threads disccusss how to maximize DVD compability, how to get good quallity and "jitters". Not quite sure which one applies, if you could describe the issue better perhaps?
http://discussions.apple.com/thread.jspa?threadID=480177&tstart=0
http://discussions.apple.com/thread.jspa?messageID=2203050&#2203050
http://discussions.apple.com/thread.jspa?messageID=2309732&#2309732

Audition 1.5 has problem playing back MT session if I have a ton of stretched clips

I might be doing something AA is not designed to do, I don't know. Perhaps (I wish) there are a lot easier ways of doing this, but I have a band that recorded, with a song that has 8 vocal tracks, singing as a group. However, they don't all start every word/phrase exactly at the same time, but should - therefore I use the clip stretching abilities in MT to cut the track up each place it's off and stretch it to fit. Normally I don't need to stretch it much at all, but after that tedious job is done the overall project sounds a lot better.
However, now I have this session that has maybe 150 stretched clips (pretty crazy, huh?) and it takes about 30 minutes or more to open. Problem is, now it won't play back decently for some reason; certain tracks sound like a bunch of garble and warble - nothing that can be made out. I do not know if all the stretched clips have anything to do with it. The wave files appear the same as before - example, you can see where a louder portion of audio is but it is nothing synced with what I hear on the speakers.
I should also mention that I had an under-rated computer run AA one time and the same thing happened there so I thought it just got tired and so I restarted AA and it worked fine after that. Here I also restarted AA but the problem is not better - worse if anything.
Some tracks play fine, others don't. Another thing of interest is that I have only stretched the vocal tracks; by far the worse garble is on the instrument tracks; they even play back as quirks and garble in Edit View if I go there.
Anyone have any solution why this happens? Am I over doing AA in some way?
Also, is there a more automated way of matching and syncing vocals? I'm talking about them being .1 - .01 seconds off the beat; is there some way AA will automatically stretch clips to match beats with - say - the beat markers?

I am not surprised at all by your reply!
I would do that, soon as I'm done with stretching/timing adjustment; thing was I was still 10 seconds from the end when it started acting up. But Just as a safe precaution in case it would do something like that I had already backed up a couple of times so thankfully I don't need to do it all over again!
So, you don't think that "set beat markers" (or something like that) can be locked to beats in MT? For example if I run the "Find and Mark" beats in EV and then use those beats to snap to the closest beat in MT, stretching the file as need be in order to get it there.. ? Maybe I'm dreaming out of this world.. Next time I'll have to force my clients to sing until they sing it dead on right!
Thanks for your response!

Podcast play back controls not responding on ipad

Podcast play back controls not responding on my iPad. The problem started today. I powered off the iPad and problem not solved. What to do?

I was unable to fix it on my own. My son suggested that I take it to the Genius Bar at an Apple Store. Fortunately I was going to be in the city, and was able to make an appt. with the store closest to me. A very helpful young 'genius' took my iPad in the back room and fixed it. I don't know what he did, but he said something about 'firmware'. I don't even know what firmware is, but he said it was unlikely that the problem would recur. There was a sense that it had to do with the new IOS6. If you are able to visit an Apple Store that is what I recommend. Make an appointment first online at Apple.com. The service is free and I was VERY grateful to have my iPad restored!

I have copied my iTunes library onto a new computer, but when I play back the songs there seems to be random "miss" or "drop out". No probs with old computer, just the new one. I'm onto my third new computer - same problem. Any suggestions please?

I have copied my iTunes library onto a new computer, but when I play back the songs using the new computer, there seems to be random "miss" or "drop out" during play back, similar to a small scratch on a vinyl record. Although when I play the same song over again, the "miss" occurs in a different location during the song. No probs with old computer, just the new one. I'm onto my third new computer - same problem. Any suggestions please?

You don't say which version of iTunes you are using, but the symptoms you describe have been encountered by some users with the 64-bit version of iTunes 12.1.
There is an alternative version for 64-bit editions of Windows here:
iTunes 12.1 for Windows (64-bit — for older video cards)
that seems to address the most of the playback issues that some users have been reporting with the full 64-bit version of 12.1.0.77 - including problems with Bluetooth speakers where either sound is degraded or completely absent. The alternative installer here is the same architecture as most previous "64-bit" versions of iTunes, i.e., a 32-bit application with a 64-bit installer. The "for older video cards" label appears to be something of a misnomer as some people have reported that this corrects problems found on current / high-spec systems.
Some users have reported that after installing this alternative version it is necessary to adjust the "Play audio using" selection (normally to "Direct Sound" rather than "Windows Audio Session", though this may vary based on your audio hardware/drivers) in Edit > Preferences > Playback to restore glitch-free audio (one part of the reported symptoms is that the "Direct Sound" choice isn't available, usually in Windows 8). It may also be necessary to ensure that your Bluetooth speakers are active and selected as the default audio device before you run iTunes.
If this doesn't address the issue, you may want to think about reverting to iTunes 12.0 - see Turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for steps needed to completely remove all installed iTunes components, and for links to the 12.0 installers.

When i play back an mp3 dj mix i,ve burn,t to cd in my car when i turn the engine of and then restart the car the cd starts back from the beginning how do i solve this problem so that when i turn the engine on end off the cd plays from the same place

when i play back an mp3 dj mix i,ve burn,t to cd in my car when i turn the engine of and then restart the car the cd starts back from the beginning how do i solve this problem so that when i turn the engine on end off the cd plays from the same place it did before i turned the engine off

It could be that the CD player will only playback "Redbook" CD's from the previous position.
And starts mp3 type CD's from the beginnig.
However.. it's not Logic related.
pancenter-

HT2375 Using logic 9: play back of all project files now has problems: Track volumes are way off - if panning is set to center then you cant hear that track? Even if pan is adjusted tracks are low and or distorted I have looked at core/built in audio

Been having project play back problems for about a month. Sometimes when I open a project the volume of certain tracks is low and or distorted. Oddly if a midi track is panned to the center (0) its volume is too low and if I pan right or left the track becomes louder. Sometimes this doesn't help and if it is an audio track things become distorted.
Although things have been working good for about a year now I think it has something to do with the fact that I have to take the laptop to work and use headphones/built in audio for play back and then take it home and use different audio interface but I can't be sure. The settings in preferences/audio/devises seem to be correct.
I have not added any plug-ins recently. I have not downloaded any new programs recently other than a NI tutorial video (shouldn't have any affect) but I am trying to use a new midi controller but again that shouldn't have any affect on play back of existing track?
Any suggestions?

Thank you for the replies. Everyone was correct about the jack, interface, and phasing problems. I have been unplugging my motu audio interface and then using headphones at work. I have not changed any detailed audio output settings in logic. When I read that the jack might be a problem I tried switching headphones. This actually helped. I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems. I can use these headphones with other devices but not the mac. I have to use ipod ear buds and the phasing seems fixed. Hopefully this information is helpful to someone else.
If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio.

Problem playing back HDV from FCP HD

FCP 5.0.4
I am doing my first HD project and am experiencing a problem I cannot solve.
Using both a Sony HDV HC1 and Sony HDR FX1 as playback devices, I cannot get the video to play back from FCP using HDV1080i60. Under Video playback, the options for the HDV are grayed out for the only firewire options:HDV(1440 x 1080) 30fps and 25fps. However, the option exists under Print To Video, and when chosen, will send HD1080i60p video to the cam>hi def monitor.
I have tried every possible setting on both cams to find a solution. Using DV NTSC I can get a work around. The cam's will both capture and control via FCP. Thanks for any advice.

No HDV decks will allow you to monitor external video from FCP through them UNLESS they are in the recording mode. So they just don't support this like DV devices do.
You need to look at a card for this. Least expensive would be the Intensity cards from Decklink. I like the MXO from Matrox too for this too... does more output, but has no input... I use an Io HD for that... and turn that slow rendering HDV to ProRes.. much faster rendering, and visually lossless.
Jerry

Has anyone had a problem with fcp x not playing back a project since installing 10.0.9 update?

Has anyone had a problem with fcp x not playing back a project since installing 10.0.9 update?

Not here; updated three systems without issues.
Can you provide more details on your system specs, the projects you're referring to, and what kind of behavior you're encountering?
Russ

Weird timing issues when playing back a recorded sound file and with synths

Hello there,
I'm having a couple of strange issues with playing back files that I have recorded using MIDI data which is then used to play an external synth which then gets recorded to an audio track which at the time is perfectly synced to a click track.
The problem is (and I really dont get why this is happening) when it comes to playing back the recorded audio file that sometimes it is either behind or ahead of the beat.
This makes absolutely no sense because sometimes it IS in time with the beat and other times when I play through my piece it is obviously out! I haven't moved the audio file in the arrange window and it is a permanent .aiff file that is stored on my hard-drive...what on Earth is going on?
On a side note, the same problem happens with any of Logic's synths when I use an LFO that is supposed to be synced to the beat. Sometimes when I play back the MIDI data it is perfectly synced and in time and other times it is horribly out. It really is just pot luck!
Anyone got any ideas?

Thank you supermacmom!
I have the LifeProof case for the iPhone5, and I remember the instructions saying that any protective screen cover should be removed before enclosing the phone into the case, but I left mine on with no ill effects.
But I should have taken off the back protective film, which was covering the video mic!

Recorded show not always playing back. New 2013 thread to ongoing problem

We have two Motorola QIP7232 2 DVR/Receivers. Since we got them back in March of 2012 we have had sporadic issues where programs that show to be recorded (30 minutes, 60 minutes, etc), won't play back. The DVR simply reverts back to live TV as if we've canceled the playback. One receiver was replaced in April 2012 but the problem still continues off and on to as recently as of this post.
This happens on BOTH receives. Neither receiver is even near capacity. Maybe 20% at the most at any time. Since we've had a receiver replaced - and it continues to happen on both DVRs - and there's another three year old thread full of the same complaint, I can only assume it's either defected equipment or defected service.
Verizon? Any answers?

I have had the same problem on the Cisco 435hdc box and an external dvr for months. Fios tech just had me run the autofix which I had already tried and this didn't help. It happens randomly and is very annoying. It also happens when I record a show and want to watch it from the beginning while it is still recording it. It does not allow me to watch from the beginning of the recording it only goes back about 30 minutes.

Midi recordings not playing back??? BIG problem!

Hi Everyone....
I hope its not a bug, so im praying someone here can figure this one out....
lets say i am playing a midi recording and record it on an audio instrument channel..
when i play on my midi keyboard everything works fine and logic simply works as it should.
now, after i have recorded a midi composition, however short or long, and i push play to hear it and edit it, logic wont play it back, and no sound comes out of the particular track?
Then, when i drag the midi recording to another audio instrument track, it plays back fine!
Also, when i try to put the recording on this track on solo, it wont work, and the midi region doesnt have the yellow line around, like it usually has.
I am guessing it has to do with the instrument, which in this case is the korg legacy, but what i dont understand is that if it would be the instrument, why does it work perfectly when i play it on my midi keyboard? and not after i record something and want to play it back????
I hope someone has some more info on me, cuz its really slowing me down atm, and it has happend a couple of times already, also on other instruments...
btw, making a duplicate track also does not work, it wont play back on that either! but only the original recording recorded to that track. and lastly, i also copied all the notes out of the midi recording, then erased it and paste it as a new midi recording, and thats also no good...
Quite a long question i guess, but i hope someone can help
thanks a lot in advance.
cheers,

I'm happy to be corrected on this one but it seems that this problem (which I'm currently trying to deal with) occurs when opening 7.x sessions in v8. At the moment the only way to get the track to play again is to close the session and re-open it. The channel will be muted when you re-open it so you need to hit 'm' on the regions(s).
It isn't synth specific either (I don't think) as I'm using a few different ones and getting the same result.
Pretty average eh. Hope they fix it soon.
Cheers
-Andrew

Sound problem during play-back

Dear friends
After recording images with my MSI TV-Tuner card, i cant get any sound during play back. First i had Win-Amp installed on my system that i thought may be it is the cause of the problem. After uninstalling the win amp, again the problem existed. Even i have installed the Beta version driver of my MSI tv tuner but i hadn't any success in solving the problem .
If somone can help me to solve this i will be appreciated.

make sure you have the recording input set correctly in your settings (look under Device options)
however your tv tuner is connected to your soundcard (eg Line-IN) then this should be set accordingly

HT201109 When I download my Final Cut project onto a DVD 3-4 photos are continually repeated throughout the presentation. If played back via the computer there is no problem

When I download my Final Cut pro project onto a DVD about 3-4 photos are continually repeated throught the presentation. If I play back via the computer this does not happen. It is the same photos repeated. I have taken loop off from view. Any assistance ?

I have two projects one with DVD and photos and the other just photos. The DVD is 20 mins and the photos just 8 mins.
I have tried to burn from the share dropdown menu ( DVD ) in FCXP and also tried download to media browser then used DVD creator to produce the DVD but the problem exists with both actions. I deleted the repeated photos from the presentation but another 3-4 different photos repeat. I hope this makes some sense .
thanks salty777

Play back respond timing problem in L8.0.1

Similar Messages

Maybe you are looking for