Play back stopped

ok
so i been working on this same project for weeks now
and one day i get up and it will not play in project manager
i am able to scrub through the film and see it,, but when i press
play nothing moves
is there something that could be stopping playback
cheers

ok guys i just ran a load of test projects
the project settings are
800x600 desktop / 30 fps / PAR = square pixols 1.0
the footage is
800x600 / 30fps / techsmith  avi [made with camtasia ]
ok
first          all the footage i have just tryed HAS worked before
second     i have just tryed making new projects with prem pro nothing will play all files load and i can scrub along the time line and the picture moves just nothing when i press play
third       i have also tryed to run the footage using prem pro pal dv preset that used to work with the footage but now nothing
it makes me think there is something wrong with the play icon in prem or the way my pc listens to the play icon but all the footage works fine in after efects and all the footage plays in VLC player
is there another component  in my pc hardwear or softwear that could cause this play back problem i wonders
mmm  also i did move and increase my virtual memory page file may be that caused it but i sure it worked between now and when i moved the page file

Similar Messages

  • AMS play back stops once 30 ppl are watching

    Hello,
    I am posting this here and  the Adobe Forum service.
    I am streaming live/dvr with 5.0.4  using the m1.large ec2 server. I have streamed well with 100+ people watching at the same time for 72 hrs events.
    I have 14 live feeds each connected to a different aws cloudfront. All feeds exists on the 1 ec2 adobe server (livepkgr 1-14)
    My web code calls to an standard .swf strobe player on my server (that came with AMS,) through cloudfront also.
    My streams are viewed on my website through enbed code which  ask for .f4m and .m3u8 through amazon cloudfront code to reduce server calls.( as I thought this might help with any bandwidth issues since each cloudfront is suppose to be 27 extra cache servers?)  The problem I just ran into this weekend was, with the only difference being the .swf player was on adobe.com
    I was only using 1 live feed this time. Then, once 31 people were viewing on 1 cloudfront feed the strobe player would stop on the website.!!?? I would have to stop FMLE live feed  and restart each time. Then the feed would come back and again once 30+ viewers were watching, down again. And the feed was being shown on two separate websites. Both sites have unlimited bandwidth in terms of people who can log on to watch.
    I am only encoding at 400kbs. on 1 feed, through 1 cloudfront. My ec3 was only at 10% usage.
    30 ppl would be only 12 Mbps
    Can someone please help. What should be my best setup to get the most out of this size ec2 before have to move up to the larger servers.
    Seems as though I should be able to more than 30 people to watch at one time on a m1.large
    Thank you greatly.
    Extra note: I have used the c1. class ec2's and can get 150 viewers. The ec2 is 8x larger, but will I get this same problem when 240 viewers are watching?

    You say your sequence settings match the clips. But if they really match, there shouldn't even be an opportunity to render on the timeline.
    You are probably using a codec that is not DV - clearly it is not the same as your timeline or you wouldn't need to render.
    Thanks everyone for your input, but I'm still at a loss and pulling my hair out. First, let me reiterate that these clips play back perfectly smoothly in iMovie, and in a larger window to boot, without dropping any frames. So I doubt my older G4, or hard-drive data throughput, is to blame.
    Let me clarify the problem. When I view clips in the Viewer, I'm not sure that frames are being dropped. Rather, every 2 secs (like clockwork), the clip freezes momentarily, then plays smoothly for another 2 secs, almost as if a cache is being filled up before playing the next 2 sec.
    I've double and triple-checked that my settings, and clips, are for DV. The clip icon on the desktop is a little slate with the letters "DV" in the center.
    My A/V Settings show the Sequence Preset: DV NTSC 48 kHz
    My Sequence Settings are:
    Frame size: 720 x 480 NTSC DV (3:2)
    Pixel aspect ratio: NTSC-CCIR 601/DV (720x480)
    Field dominance: Lower (even)
    Editing timebase: 29.97
    Compressor: DV/DVC Pro NTSC
    Quality: 100% (i.e. Best)
    Scan mode: Interlaced
    Aspect ratio: 4:3
    Audio rate: 48 kHz
    Audio depth: 16-bit
    Audio config: Default
    Lastly, the only 2 strange things I've found is that even though the clips are DV, in the clip properties it says the data rate is 6.9 Mb/sec (I thought DV is 3.2 Mb/sec). Also, the audio says 32 kHz (I thought DV is 48 kHz). Does this mean anything?
    Thanks again!

  • Play back stops 10 seconds in when first playing project

    so when i first open a project and press play to hear it itll stop right when it reaches the main part of the song where all the instruments kick in.. itll say "error" or project overload. But when i play it from the beginning again it will play back just fine, every time. ??

    Eriksimon wrote:
    Hi PC,
    I have noticed this as well, especially on my system. Sometimes I have to hit play every two bars. It's like having a car that will only move after one has pushed it. Maybe ApplEmagic should add some 'prepare play' (=load buffers) key command.
    Is there any 'official' acknowledgement or justification for this?
    regards, Erik.
    Hi Erik,
    As far as I know there's no official word from Apple on this.
    There is this page dealing with System Overload messages.
    http://docs.info.apple.com/article.html?artnum=304970
    Logic's method has always been to free resources when the sequencer is stopped.
    VI's are shut down as are any FX plugins, after stopping Logic the CPU meter will eventually drop to zero. This was done early on and was a saving grace for many years as it allowed almost any computer with enough RAM to run Logic and still have a resonably quick machine (say for editing) when the sequencer was not running.
    Most, if not all other MIDI/Audio sequencers keep plugins and VI's partially active and as a result can quickly bog down underpowered computers. However, the upside is... when hitting play you don't get a bunch of VI's, FX plugins and disk buffers suddenly going from 0 to 160kph trying to grab a load of data, memory and CPU cycles at the same time.
    Personally, in this day of 8-core 3gHz machines Logic could change it's M/O and no one would ever notice.
    Just my opinion but the way Logic works has created several other small related problems that sometimes make it appear less than professional.
    pancenter-

  • Video questions - Play back stops for no reason...

    I created a FLV file via the Flash Video Encoder that comes
    with Flash. I then uploaded it to my server and when I play it in
    my file, it stops at a specific point. I am not sure why it is
    doing that. How can this happen, and how can I get rid of that?

    I'm having the exact same problem - Music will usually play fine, but sometimes it will just stop mid-song for no reason. When you hit "menu" it is still on the selected playlist and the Apple TV behaves normally.
    If I re-start the playlist the problem doesn't usually happen again.
    No other problems with wireless connection (streaming video and YouTube never stall or quit playing) and my computer is currently set to never go into sleep mode.
    I have noticed that sometimes music play will cut out for a second and then resume playing for a bit, but then it usually stops completely a short time later.
    Seems like it might be having trouble buffering music, but that doesn't make a lot of sense as it will stream HD video with no problems.

  • TS1424 i downloaded an album from i tunes, but it will not play back correctly,tracks stop half way through and skip to the next one. what can i do???

    I downloaded an album from i tunes, but it will not play back correctly,
    it starts a track and then stops randomly and jumps to the next track
    and then does the same thing ad ainfinitum! What to do??

    Other people have been having similar problems with songs over the last few days, I assume that there has been a problem with Apple's servers.
    Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting those tracks from your iTunes library and redownload them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
    If you aren't in a country where you can re-download music or if they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that album and use the 'Report a Problem' link.

  • Can't stop audio from playing back on my MacBook Pro

    First, Im new to Mac, Ive only been using it for a month, but loving it so far. =) I'm trying to record vocals in Logic Pro 9. My set up right now is MXL 990 plugged into a Phonic Firefly 302 USB interface and that is plugged into my MacPro. Now my problem isnt really with recording, I can record vocals fine. My probem is I want to hear my vocals with all the effects and plugins on when I record. But my mac wont stop playing back my dry vocals through my computer. I dont want to monitor vocals through my mac, only through logic. So i tried to go into Audio MIDI Setup and mute the playback but when I do that I cant record them in logic anymore. Its really annoying everytime I try to record hearing a version of my vocals with effects and hearing another version dry all at the same time, and they arent even in the exact same time, so you get a little slap back echo super annoying. My Audio MIDI Setup is set to "Built in Output - use this device for sound output. Phonic Firefly USB - Use this devise for sound input. I have tried setting that to the output also but it didnt do anything, still had the echo.

    Thank you for your replay
    It was working on my Mac before installing the new update of Mac software. then its corrupted
    from where I can ask for refund? as I bought from App Store ?
    regards

  • Songs purchased from store only play back a few seconds and stop  any ideas?

    purchased from store only play back a few seconds and stop      any ideas?

    I think I might have found an answer - importing a folder and or Limewire!
    Either Limewire mess's with the files, folder or your system or iTunes attempts to stop illegally downloaded files being played. iTunes might also do it if importing a lot of files in one go.
    I imported a music folder that isn't mine from our home network drive that has a few tracks in it downloaded through Limewire. I re checked some of the files in Ableton Live and they are actually damaged! So I tried importing one of the Limewire tunes again individually after finding some info online (links to the pages at bottom) and the track plays no prob now. I also un-checked the "look for shared folders" in iTunes preferences.
    For about 2 years now I haven't been able to import more than 3 files at a time which is why I imported a whole folder (about 50 tracks) just after the software update and C.D importing.
    My concern is that importing a whole folder even without any Limewire downloads in it might well be treated this way by iTunes. Most of the tracks in our network drive folder that have been downloaded through Limewire are legit direct connect transfers from producer to producer or legit submitted tracks!
    Hope this helps.
    http://www.tuaw.com/2007/03/14/limewire-reportedly-unhappy-with-itunes-7-1/2#com ments
    http://www.crunchgear.com/2007/03/15/limewire-will-make-a-mess-of-your-itunes/
    Reqs

  • VIDEO PLAY BACK - SOUND (Stop a UIloader?)

    PLEASE HELP ME SOMEONE!! I am going to rip my eyes out!
    Here is what I have set up:
    I have a website...
    http://www.thedrewblood.com
    I have several pages set up on a main time line. Siting on my
    main time line is a UI loader that automatically loads an mp3
    player, which the client wants to play through, with out
    interuptions. The pages have labeled frames, and the buttons have
    eventlisteners to move the time line to the specific frame. On this
    frame (say it is "video") I have a movie clip, with the page
    content. Inside this movie clip time line I have a ui loader which
    will load my flv playback component with various video.
    So, the video loads perfectly, and everything is fine.
    However, there are some complexities that I would like to remedy.
    when you navigate away from the "video" frame, the sound from
    the video continues to play. I would like that sound to stop, or is
    there a way to stop the ui loader?
    I want the video to play, and stop as you leave the frame
    because I don't want the ui loader for the mp3 player to be
    interrupted.
    If anyone can help me it would be greatly
    appreciated!!

    Rob, thanks for gettting back...here is how I have it set up
    and the code for it:
    On my main timeline, I have labeled frames (music, video,
    photos, gigs...etc) One a frame labeled "home" is were i have all
    of the buttons (music, video, photos, etc...) siting with event
    listeners telling the timeline to go to those frames. One the
    "video" frame sits a movie clip, inside of this time line are some
    more navigation buttons, very simple. (basically you are navigating
    deeper inside other timelines- 2 to be precise)
    when you navigate to the section with the video, this is how
    i have it set up. I have a button, and I gave it an instance of
    "train_btn". Then I have a UI Loader sitting next to it. I gave
    that an instance of "swfbox". Then, on that frame I set this code"
    stop();
    function ontrain(eventobject:Event):void {
    var swfPathAndName:URLRequest = new URLRequest("train.swf");
    swfbox.autoLoad = false;
    swfbox.maintainAspectRatio = true;
    swfbox.scaleContent = false;
    swfbox.source = swfPathAndName.url;
    swfbox.load();
    train_btn.addEventListener(MouseEvent.CLICK, ontrain);
    ***my source FLA for "train.swf" is set up like this.
    I have another FlA file, which has the FLV playbackcomponent
    and the video embedded. I test this, and it works just fine.
    So, everything works, but, I want to be able to navigate away
    and not hear the sound, also, I will eventually be adding more
    video, which I want the ui loader to load...so, if it loads another
    video, i don't want the sound from the first one to continue
    either.
    If you could help that would be FANTASTIC!
    Thanks
    Adam

  • Drop in's not playing back until 'stop/start'

    Morning all,
    Anyone else having problems playing back a drop in on an audio track?
    I'm finding that if I cut into an audio tack, record a new section and drop it into the bar or so
    that I'm replacing, when I come to play back the result it plays the original track up to the drop-in then silence as it scrolls through the new audio file, and remains silent even when it cuts back to the original file.
    If I stop Logic 9 and restart it again on the new section it plays the drop in ok but then silence when it scrolls back into the original audio file, so stop and restart then all is well again.
    I tried selecting the (now) three sections and merging them but it won't let me do that either and I am still left with three sections.
    This using core audio in Logic 9.0.2 with a Digidesign 192 i/o interface.
    Cheers
    Pappy

    Hi Bee Bee,
    This was the first session I have tried using Logic 9 with Core Audio, so I can't say whether it will manifest itself in other projects yet, though I have been having serious crashes when trying to implement the TDM/DTDM option in the audio driver prefs page ( hence trying to go native with the core audio set-up). To finish the session I have reverted back to my old set-up of Dual 2.7 G5, Logic Pro 7 and PT 7.4 which is working very well.
    It occurs to me that this problem may be down to the fact that the project in question is automatically saving itself onto the MacPro hard drive which of course also has the system software and application on it, and I seem to remember an old manual recommending that audio files are best written to a separate, dedicated drive. What do you reckon?
    Best
    Pappy

  • Keys stop when playing back samples EXS24

    I like to play back samples I have made on logic's EXS24 sampler live but sometimes they just stop playing?
    Is logic suitable for playing samples back live?
    Thanks
    Ed

    Why don't you try this;
    Take your original Quick Time movie into Compressor as your input file. Open up Preview; mark in and out points around a short section of your requence that includes the place where it stops playing. Encdoe the file with the appropriate DVD preset.
    Bring that m2v file into a new project in DVDSP. See whether it plays in the simulator; if it does, do a build and play the TS folfer in DVD Player. If that plays OK, burn to a physical disk. If that plays, I'd re-do the encode for the entire movie.
    HOWEVER, if it plays in DVD Player, but fails when you play the physical disk, I would suspect you either need a new optical drive – OR it needs cleaning (per David McClain's suggestion). Try burning on another computer.
    Russ

  • DMA 2200 Stops Play Back

    I had orginally connected my DMA 2200 to my Windows 7 PC using a wireless connection via a Linksys E3000 router. Initially, the setup appeared to work fine and I was able to stream both Music and Video from my PC upstairs to the DMA 2200 downstairs without any problems. At some point I updated the software of the Extender and it appears as perhaps that is when my problems began. The DMA 2200 would start out playing back fine for a short period of time, anywhere from 10 minutes to an hour and then it would either freeze up or stop playback. I thought this was being caused by interference in the wireless network so I purchased and a set of Netgear Powerline AV 500 adapter and connected through this via a Cat 5 connection. Transmission rates between the extender and the PC are now 100Mbs and consitent. Well the same thing is occuring as previously and when monitroing the bandwidth from within Media Center while it flutuates slightly it is always well into the HD range.
    Has anyone else encountered this problem or know of a fix?

    Hi Ron,
    I have a new DMA2200 installed with the exact same problem only I'm using a 1000 router and not the 3000.
    Anyway the problem still exists weather it's connected wireless or wired so I dont think the router is the problem.
    I haven't performed any software/firmware upgrades on the DMA yet but it sounds like it didn't do you any favors.
    I have no solution yet so I'll be watching here and let you know if I find anything.

  • While playing back a video file the sound goes sort of like an echo and stopping the video and playing back again it sound great, the video is recorded live with an AJA system and plays fine on the units;any clue to what is going

    While playing back a video recorded on a AJA system we transfered it to the macbook pro played it with quicktime works great and sometimes it sounds like an echo same file track and it plays fine on the aja system.Tried it on another macbook pro and it did the same issue.Any clue to what is going on.Thank you.

    Thank you supermacmom!
    I have the LifeProof case for the iPhone5, and I remember the instructions saying that any protective screen cover should be removed before enclosing the phone into the case, but I left mine on with no ill effects.
    But I should have taken off the back protective film, which was covering the video mic!

  • After having played back a backup on a Mac under OSX 10.7 containing CS4 following error massage occured when trying to start PS:

    after having played back a backup on a Mac under OSX 10.7 containing CS4 following error massage occured when trying to start PS:
    eroor 150:30
    seems to be related with registration

    By courtesy of R_Kelly:
    The 150:30 error means licensing broke.
    Two ways to fix this: If you are used to the Terminal app, you download the license recovery package and following instructions carefully, you use the python script in the package.  Error "Licensing has stopped working"  | Mac OS
    If for some reason it doesn't, reinstall CS4 from your discs, or download the CS4 installer here.
    http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html
    Have your serial number ready.

  • DVCPRO HD 59.94 to offline RT - multiclip doesn't play back in Viewer

    Hello,
    I have 3 streams of DVCPRO HD multiclip'd in a DVCPRO HD timeline (59.94, 960 x 720). When I use media manager to offline it, I get a warning about the framerate being retained (59.94) instead of offlining it to 29.97
    Offline media results in 59.94 framerate and the the offline timeline requires no render. However, FCP will not play back the clips in realtime in the Viewer. I can cut on the fly but even the Canvas doesn't update with the most recent "cut-to" angle. For instance, playing down timeline in realtime with angle 1...cut video to angle 2...the cut is registered but the Canvas still shows angle 1 footage until playhead is stopped.
    A few notes...Only one of the original streams is native DVCPRO HD. The other two streams are HDV 1 and HDV 2 transcoded to DVCPRO HD using Compressor.
    OS 10.4.11
    FCP 6.0.2
    QT 7.4.1
    1st gen Intel iMac 17" 1.83ghz core duo 2GB RaM
    Thanks!

    Nevermind, got it! Don't ask though, nothing "technical" fixed it.
    After doing the media manager offline, a new project opened with 2 of the clips being offline. I was warned during the offline process that the 2 clips couldn't be offlined and presented with options to skip, retry, and abort. I skipped both times and the new media files remained intact on the hard drive. However, both of them had funky numbers/letters at the end of the name (as if to say the original clip names were too long, they were appended part-way through each file name with, for example, "#5692")
    Anyway, I reconnected the offline media to the clips and, voila, the offline timeline now plays back the multiclip in realtime both Viewer and Canvas, hooray!

  • Video does not play back FCP5

    When I play back video, only audio plays back, and it shows the first frame of where i was playing back. When I stop it, the video jumps to the last frame that it passes.
    Please Help!!!

    How are you monitoring?
    What's the format?
    If on an external device, is the format supported for real time playback?
    x

Maybe you are looking for