Play Count after iTunes 5 upgrade

Since upgrading to iTunes 5 from 4.9, most (but not all) of my play counts have been turned into a series of random numbers, such as -1088620803. Anyone else have this problem? I think I've been spared all the other bad stuff, although I really dislike the new design.

Fastal,
Good that you are back with the all important playcounts but as I do know the Technical reason for this one-off occurence, let me assure you it is not a fault rather another step forward as we move into an era where data files that do not conform, for whatever reason, to the latest standards will be changed gradually each time they are moved or accessed, until they all match the specifications as laid out... files you have had on your computer in the past are the most likely culprits... a few years ago the rules were very loose and there were thousands of differents formats ... as these have been assimilated into the latest data formats you end up with a situation like this... to write software that would fix and convince everyone to use it is impossible as the variables are too many and would probably be a step backwards.
take care Fastal you are welcome... TP

Similar Messages

  • ITunes doubling play counts after being listened to on iPhone 5

    I just synced my phone to my iTunes after playing an album only once on my iPhone 5 and I noticed that my iTunes play count is showing that each song has actually been listened to twice. Same goes for a song that I played four times, the play count says that it was played eight times. Is this a new glitch/is there a way to fix this? I rely heavily on my play count numbers for playlists and sorting my music. Any help?

    See this page - Itunes playcount too high
    Looks like a few people are having the issue aswell.
    It appears that the iPhone and iTunes are holding two seperate play counters. Whenever you sync the phone, the play count on the phone should reset everything to zero. What is actually happening is that the iPhones play count and iTunes play count are adding together these numbers - hence the large increase in play count.
    So, if you listen to a song once and then sync the phone - play count will be 1. If you then do the same - it jumps up to 3. Again, playing the song again - will increase the count to 5.
    I've had this issue ever since iOS 8 and a few of my songs in iTunes have over 1300 plays... Fairly sure I didn't leave the song on repeat and let it play for 5 days straight...

  • ITunes deleted my play counts after update. How do I get them back?, iTunes deleted my play counts after update. How do I get them back?

    Hi yesterday I updated iTunes to the most recent version. After I had restarted my computer all my play counts had gone. Can I get them back?

    Me to on my ip5. Then i noticed all accounts were gone in mail.
    Luckily i had 90% backed up in yahoo so when i set up the account again i had most back. Still sure though info is missing.
    In icloud i only found about 10 contacts who had been stored in icloud contacts
    Any way i can get all data back? Can't be i accidentaly deleted these accounts right before download of ios 7

  • IPod Classic updating ratings and not play counts in iTunes

    I am currently using an iPod classic purchased in 2010 with iTunes 10.5.3.3.  however I encountered the same issue on 10.6.1 which made me think that if I downgraded that it would solve my problem but it hasn't.
    Here is my problem. Over the past two weeks, I noticed that when I synched my  iPod my recenlty played playlist number went from 835 to 720. I typically listen to over  fifty songs throughout the course of the day. I have playlist set up to select songs based on a last played date. Last played not in the last 14 days. I last synched my iPod yesterday and I recently setup a new library that is less than 2 weeks old.
    On the iPod everything was working fine. When I synched the iPod I noticed that the playlist reverted back to yesterday's status and that my ratings had changed but not the last played date and play counts did not update. Hence breaking the smart playlist functionality of Top 25 Most Played and any other playlist based on play counts. Also my podcasts are not updating as well. I listened to a podcast today and it is still showing up as new after syncing with iTunes.
    I noticed that if I do a hard reset (Menu+center button) and resync then the playlist update from the point of the last. I have not encountered this problem until upgrading to 10.6.1.
    I even went has far as deleting the itl files and letting iTunes create them again based off the XML and still the problem persists. I even created a new library and added new songs and the problem persist.
    I would like to know a good way to getting the sync functionality to work properly and not just sync my ratings. Has anybody encountered this problem?

    The rules for my recently played list is as follows:
    Last Played is in the last 2 weeks
    Kind does not contain video
    Live updating
    Oh and I forgot the Match all is checked. 
    I have changed my playlist from Apple's default playlist of:
    Match all
    Last Played is in the last 2 weeks
    Media Kind is not Podcast
    I have found that Media Kind balloon breaks live updating on iPod Classics but the Kind or Genre balloon does not. In the past I could go two to three weeks without syncing as I have over 100 Gigs of music and sometimes could go into recently played to find a song quicker because it would be at the top. Now that isn't the case.  Most of my smart playlist start with Last Played is not with a certain range so I can listen to new songs and I rate songs as I play them so I can get rid of 1 & 2 star songs off my library at a later date. However when I sync my device the songs reappear  on certain smart playlist with no play counts but updated ratings. Like Mix Rap or 4&5 star unplayed.
    For example, Mix: Rap
    Match all is checked
    Last Played is not in the last 14 days
    Last Skipped is not in the last 7 days
    Rating is not 1 star
    Rating is not 2 star
    any
    Genre contains Hip-Hop
    Genre contains Rap
    Limit to 25 items Random
    Live updating
    I am going by the recently played list because I wiped the entire library as of April 3, 2012 so everything I play is still within the two week window. I have a few other playlist that are not updating after syncing. Meaning they are updating on the device and revert after syncing with iTunes.
    After writing my post last night I did a clean install of 10.6.1.7. By clean install I mean I deleted all information from my Users\AppData folder related to Apple Computer in Local, Roaming, and LocalLow. I also deleted my .itl, itdb, and sentinel files and imported my Library xml file. I also performed a super fix on my iPod classic as well.  I played a few songs last night and they seem to be running fine. But that's how it always starts out.
    Any feedback would be helpful....Thanks for the response turingtest2 by the way
    Message was edited by: dontreallycare4apple

  • IPod Nano and Play Count in iTunes

    I don't usually pay much attention to play counts on my sixth generation iPod Nano.  But the other day I was reviewing the Top 25 Playlist and noticed it was full of songs that I don't play that much or that I tend to skip when they come up on shuffle.  Looking at my iTunes library on my windows PC I noticed that songs that should have high play counts are listed as never being played.  In addition, songs that I know for a fact I had played earlier in the day had last played dates that were several months old.  Upon searching through the forums, I found may posts about playcounts not tracking properly.  But none of them matched the exact problem I seem to be having.
    Following from recommendations in the various threads regarding problematic playcounts, I reset my iPod to factory settings, recreated the library in iTunes, resynced the iPod and iTunes libraries, turned off cross-fade on the iPod and made sure that ITunes was set to automatically sync.  Doing so reset the playcounts to 0 for my entire library in both iTunes and on my iPod.  I then played eight songs on the iPod.  Two of the songs I skipped part way through.  When I plugged my iPod in to my PC, the iTunes notification came up saying my iPod was being synced with my iTunes library.  I was estatic to see that the playcount in iTunes totaled six like it should.  That feeling disappeared quickly when I noticed that not a single song listed as being one of the six played songs was a song that had actually been played.  In addition, two of the six supposedly played songs were songs that are in my iTunes library but not uploaded to the iPod.  I repeated the exercise with exactly the same results...play counts were correct but the songs identified as being played didn't match what was actually played.
    What am I missing?
    Cheers,
       DarWun 

    I have just noticed that the play count has been updated after I restarted my PC but only for the song I've listened after last connection so all my song count for the last week I've spent without connecting the iPod has been lost. Is it normal that you need to restart your PC before connecting iPod if you want your play count to be updated? I normally leave my PC without restarting for weeks..

  • The play count in iTunes doesn't advance

    After I play a song, the plays count doesn't advance.  Any ideas what's wrong?

    Tango,
    This is a user forum.  To submit feedback to Apple, use the iTunes Feedback page:
    http://www.apple.com/feedback/itunesapp.html
    However, you will be interested to know that Forum member turingtest2 has created several scripts that do exactly what you want:  consolidate by moving rather than copying, clean dead links, etc.  The scripts are available here:
    http://samsoft.org.uk/iTunes/scripts.asp

  • Apple Genius Deleted my Play Counts from iTunes

    Today I went to the apple store to fix why my music wasn't syncing between my iPad and Macbook Pro.  Well they clicked something and it deleted all my playcounts.  Shows none of my music has been played since March 2013.  What a disappointment.  I don't know if there is anyway to go back and undo this, does anyone know?

    Having the same problem.  Not all of my play counts are reset but about 100 have been 'adjusted' downward, some to zero.  Last played data show the date they were played but counts are off.  I had just synced with iTunes Match, deleted a track that wouldn't play, 'this computer is not authorized to play this song', and redownloaded the track.  Subsequently, a playlist that was only populated with that particular track suddenly had ~100 additional songs listed.  Pretty frustrating.

  • Manually Managed Ipod - Syncing Play Count with Itunes Library

    I've had a 80gb 5th Generation Classic for 7 years or so, ive always manually managed it. Now that i've bought an iphone 5 with enough storage for my itunes library i want to transfer my music onto my new phone, so i don't need to carry round an ipod and iphone!
    However my play counts in my library are all very low as i don't play music on my laptop too often.
    Is there a way to get the play counts off my manually managed ipod on to my laptop to put on my phone? I would really like to continue my play counts from my ipod to my iphone.
    Much appreciated.

    Hey, apologies for not getting back sooner, ive been working away.
    I've just tried the script out and i appear to be having some issues.
    When i script more than a handful of songs (15+ ish), i get the following error:
    Line: 136
    Char: 53
    Error: The track is not modifiable
    Code: A0040203
    Source (null)
    and consequently none of the stats are transferred over.
    If i script in small batches i seem to be able to script and also focus in on the song that appears to be causing the issue, and the error pops up again when i only script the suspect song. However the stats also get scrpted over from the song. I then pick the next 10 songs or so and script and carry on. With over 7500 songs this is a long long exercise.
    Do you know any reason for the above error, and is there anything to solve it?
    I must point out im scripting from my iphone 5. My ipod was left at work so ill try that tomorrow night. The itunes version im using is the latest build, 11.0.0.163
    Cheers.

  • I can't find Play Count in iTunes 10.7

    I go to View Options but Play Counts doesn't show up... was it eliminated or it's somewhere else?

    I was using an iMac with the library that is being shared, and accessing it from a laptop.
    Now it's updating it and PLAYS shows up because I had to also check the "home sharing update play counts" in the other device as well, I mean my laptop that was accessing the iMac's Library.
    I thought that it was enough to check it only in the main library.
    Thanks!

  • IPod Shuffle no longer works after iTunes 8 upgrade

    I'm not sure if this should be posted here or in the iPod Shuffle category so I'll post it in both places. I recently upgraded to iTunes 8 and I'm running OS 10.4.11. I have an iPod shuffle that was purchased new last December so I'm not sure what generation that makes it. It has always worked fine with iTunes 7 but now I can not get it to play. I can sync it with iTunes 8 and see that my songs and podcasts are there on the Shuffle but when I disconnect it and plug in the ear buds I get no sound. Nothing. I've tried to play with the volume, forward to different tracks, pause, play, etc. etc. Nothing. No sound coming from iPod shuffle at all now. It is charged up so that's not the issue.
    I should also say that my Shuffle was working fine just moments BEFORE I synched it with iTunes 8 for the first time.
    Is there a known issue with iTunes 8 and the Shuffle?
    Thanks in advance.

    After searching the forum I finally found that others were having the same problem with the 1st Gen. Shuffle after upgrading to iTunes 7. Even though it was a different iPod Shuffle and iTunes version their solution worked for me.
    All I had to do was delete the "Podcasts" folder that had been created for the Shuffle and voila!

  • Choppy Audio on Tracks After iTunes 8 Upgrade

    All the tracks in iTunes now sound choppy. Music fades in and out, sounds scratchy, etc. This happened immediately after upgrading to iTunes 8. Anyone have any solutions?

    I am experiencing scratchy audio in iTunes and I believe that it coincides with a fairly recent upgrade. I too thought it was my speakers because the distortion fits the profile or a torn cone or other mechanical speaker issue. But I eliminated everything but iTunes as the cause, since the problem persists with headphones but playing tunes directly in the Quicktime app results in clear sound. The same files sound fine on my iPod.
    It is most apparent in certain frequencies, i.e. the vocals in many tracks are the most affected. On some tracks it is subtle and on others unbearable. Mp3s from eMusic, ripped CD tracks and purchased iTunes are all affected.

  • How to connect apple tv generation 1 after itunes 11 upgrade?

    After upgrading to iTunes 11 I lost connection to my Apple TV Generation 1.  I have tried everything suggested in the forums, but was hoping someone has any other suggestions.
    This is what I have allready done:
    - Power cycle apple tv
    - Power cycle WIFI network
    - Power cycle PC
    - Disable firewalls
    - Reinstall iTunes
    - Factory restore apple TV
    - Upgraded apple TV genaratio 1 to latest firmware
    - Power cycle everything again...
    I confirmed that connectivity is fine.  Apple TV connects to internet (youtube etc.).  Also I can ping AppleTV from my PC.
    Again, tried everything I could find on the forums without luck.
    Anyone have any other suggestions or troubleshooting steps?
    Thanks in advance!

    I was able to fix this by enabling IGMP broadcasting on my router for the IP addresses of the PC with iTunes and the apple tv.  It appears that bonjour uses this and iTunes recognized appleTV immediately.
    I did run into another issue.  After upgrading to the latest firmware Apple TV keeps rebooting/restarting...

  • After iTunes 10 upgrade iPod Classic not identified nor can I restore

    Totally lost and don't know how to proceed. I have been using iTunes with my iPhone with never a problem. I received an iPod classic 160GB for Christmas last year and again, no problems, everything has been working great.
    I am using Windows 7 Ultimate 64bit. I upgraded to iTunes 10 and iTunes works great. I plugged in my iPhone 2G, no problem. I plugged in my iPod Classic 160GB and iTunes freezes, NOTHING happens at all. The album cover pictures don't even display until after I unplug the iPod Classic device.
    I can see iPod device in "My Computer" but not in iTunes 10. In iTunes 10 the device doesn't appear at all until I give up and unplug the device. Then an error message pops up and the iPod is shown in the left column. The error says a file is missing and the device can't sync. I can't do anything except click OK. Then the error message goes away and the device drops out of the left column.
    I searched for info on this problem, and have tried all of the suggestions.
    It charges through USB with no problem except the battery is fully charged.
    I tried 3 different USB ports on the PC.
    Tried restarting iTunes.
    Tried restarting the computer.
    Went to Apple support website, tried the troubleshooting assistant:
    *Reset the iPod.
    *Had already tried different USB ports.
    *Had already tried restarting the PC.
    *Removed iTunes 10 and all the software programs in the order specified.
    *Went to Apple website and Re-installed iTunes.
    *ITunes and iPhone still work fine, NO iPod Classic recognition in iTunes.
    *Next option is to Restore but CAN'T because iTunes won't recognize the iPod to perform Restore. After reading the instructions, it appears that the iPod has to be connected to do this, and that's the problem -won't connect!
    Is there anyone who can help? This didn'thappen until installed iTunes 10.
    The iPod has 120GB of music on the device. The device is still working fine. I just can't get iTunes 10 to recognize the iPod Classic device.

    After upgrading to iTunes 10, when I tried to connect my 80GB iPod Classic to my Mac Book Pro, the iPod was not recognized by either my computer or by iTunes. It would say "Connecting" on the iPod, but then it would click and show the Apple icon for a few seconds, then the cycle would repeat.
    I finally decided to start the iPod in Disk Mode and then connect to my computer. When I did that, it would connect to my iTunes and I was able to sync.
    I then went to Disk Utility and verified and repaired my iPod disk (no problems and nothing to repair.) On one discussion, the person then erased everything from his iPod and then restored. Rather than do that, I disconnected my iPod and re-connected it in the standard mode. This time, it was recognized by iTunes and I was able to sync.
    Tried it again this morning and again it was able to sync. The next time, it may not, but right now it appears that might be a possible solution.

  • After iTunes 9 upgrade iPod Classic is corrupt without ability to restore

    I am upset right now, so this will seem a bit harsh. I do not really care if this has been posted, it needs to be said again.
    I upgraded my Windows Vista x64 PC to iTunes 9 today and attempted to sync my iPod Classic 80GB to iTunes. It failed and it became apparent after doing some searching online that the hard drive was corrupt. After connecting my iPod to the PC again, iTunes told me that the iPod was corrupted need to be restored. After downloading the update and extracting it, the iPod restore process begins and then fails.
    I've tried to restore my iPod on Mac and Windows, and I've tried all the recommendations from Apple regarding the error that I get, something about the restore failed due to an unknown error 1439. Thanks Apple for unknown errors.
    This is a relatively good condition iPod that is slightly out of warranty and I need to know what I can do to get it repaired. It worked just fine this afternoon and I've never had a problem with it, ever. I know it's a functional iPod I just need a restore but it won't work for me.
    Will the Apple Store nearest me help me with this, or will they tell me to take off b/c it's out of warranty????
    Questions needing answers.
    Thanks for any and all help.
    -Matt

    I stumbled onto this thread after I hooked up my iPod video to try and synch it. I too got the "Corrupted iPod" message. I usually don't eject my iPod, as it doesn't disconnect from Windows cleanly. After going through a few steps, I have my iPodsynched & ready to go. (Perhaps it's just a bug in the new version of iTunes, which I have to admit is more aesthetically pleasing).
    I clicked the "Eject iPod" button in iTunes.
    I selected "USB Mass Storage Device" from the safely remove hardware wizard
    I reset the iPod (Switch to HOLD & back, then hold down MENU & center buttons until screen turns off)
    Unhooked iPod from data cable
    Hooked iPodback up
    iTunes recognized and synched...
    I don't know if this will help anyone, but I'm hoping that it will. Post back letting everyone know if it succeeds or fails.

  • Album Art Screensaver does not work after iTunes 9 upgrade

    After I upgraded to iTunes 9 my album art screensaver no longer works. I get the message saying "Your iTunes library does not contain any songs with artwork". I have tried deleting the plist files per another support topic, but this doesn't fix the problem. Ideas?

    This is the Tiger forum - you are running Snow Leopard!
    But I would suggest you post your question in the iTunes forum:
    http://discussions.apple.com/forum.jspa?forumID=789

Maybe you are looking for

  • Is there a way to see previous data usage if not the primary account holder?

    I am not the primary account and therefore cannot look at bills to see previous usage. Is there anywhere on the website I could find this? I know in the past, I've been able to get the last 3 months (either from website or phone app, I don't remember

  • How to clear local currency balance in foreign currency account

    hi, i have a bank account in EUR but local currency is USD. in the account balance, it has 0 in EUR but has balance in USD.  i need to clear the amount in USD. i tried f-02 to post EUR 0 and balance which in USD i enter in amount in local currency fi

  • CAF and BW - Bean not found

    Hi xperts! Related with [this thread|Re: CAF 7.1 BW Integration;, Iu2019m facing the same problem mentioned: u201CBean RSSDK_LOGSYS_REMOTE_GET not found on hostu2026u201D but connecting a BI 7.0 with a Composite (CE 7.1.1). I followed [this|http://he

  • Header with 3 backgroud images, need help

    Hi! I'm learning Dreamweaver CC atm, and i am confused in building my header, i need help, if you got time for a beginner. First, i made a Wrapper Div, added an header div inside that include 3 more div. Each of those 3 div inside my header have a ba

  • Can't Purchase Phone Number

    I tried to purchase a phone number but the US state of Alaska is not on the list.  What do I do to purchase a phone number when the state in which I live is not on the list? Someone please advise?? Thanks, Lee