Play Edge Animate content AFTER Page finishes loading

Is there any way, either in Edge or Muse, to have the edge animations wait until the Muse page finishes loading before starting to play?
thanks

I find no way within Muse to accomplish what you want.
In An you can always just delay the start of your animation(s) for a specificed time.
That may now work very smooth though because everyone's systems will load the pre-animation page at differing speeds.
I'm NOT a js coder but I was looking at some of the generated js code and I have a feeling a good js person could make your animation do what you want.
I see different 'load' perameters mentioned. Maybe one of those could be used.
I'll bet your answer is somewhere in that *_edgePreload.js file.
http://www.lynda.com/home/Player.aspx?lpk4=107145&playChapter=False
That video talks about turning off Auto Play in An and using js for control. It doesn't mention how to do it, just that it can be done.

Similar Messages

Import edge animate into after effects

Hi, is there any possibility to import a file that is created in edge animate into after effects?

I don't think you can as they are both two different technologies. Understand that an Edge Animate file is really an HTML5 file. The actual stage that is used when creating your Edge Animate file will also import an HTML file.
Maybe one of the Adobe mods can chime in to help.

Edge Animate vs After Effects

I am very new to these tools, so please pardon if this is a ridiculous question. What is the difference between Edge Animate and After Effects? Is one better for web design? Thanks,

If you do not need interactivity, then AEffect is still a great tool to use. If you need interactivity then EAnimate is great as well

How do i actually view Edge animate content at 100% on a connected device??

Hey,
I'm working on a mobile mockup in Edge Animate, the resolution is 1280px high x 720px wide. I am previewing the output on a HTC One X via Edge Inspect.
It is working fine (once I figured out how to use the reponsive layouts feature in Edge Animate) but the android status bar and the 'dock' menu within Inspect are squashing my comp vertically so the preview is not in fact 100% scale... my 1280px high comp is now squashed to 1134px. Doesn't exactly give an accurate view of the final product...
It seems to me that the 'Show full screen on devices' is a bit misleading, or is it just how android handles this?
Any help much appreciated.
lance

Hi Lance,
I'm not entirely clear on what you're seeing, could you possibly take a screenshot and post it here if I've misunderstood what you're describing? Thanks, meanwhile, I'll do the best I can to help.
There are two things that may prevent your mockup from taking up the entire screen on Android. There is the Android status bar and our Edge Inspect UI chrome that shows the URL and a couple of buttons. The Edge Inspect chrome you should be able to easily remove by choosing the full screen button within the Chrome extension. "Show full screen on devices" may be a bit misleading it's true, because when you click that we don't also hide the Android status bar. That is however, by design, since that status bar will remain visible on devices while your page is being shown in the native browser on the device, so we're giving you an accurate representation of your page.
Hope this helps,
Mark

Why wont Edge Animate preview after placing .oam file in Muse?

I placed my Edge Animate Animation into Muse but it wont preview when I select preview. It does not even show image or play animation. I followed instruction to place edge animation and in publish setting selected the animate deployment package. Deselected the frameworks via CDN (read this should not be selected but also tried it selected) made sure the stage is transparent. I saved it and published.. In Muse I selected the Place option and selected the .oam file and placed it into my webpage. The placed file shows with animation image. I made sure to link the asset to file but it will not preview or play animation. Please help!
Thank you,
Lynn

Does it loop when you publish it to the web?

I can't print Multiple pages in FF6 – clipping off content after page 1. I have thrown out firefox completely off my imac and re-installed... still does not print correctly. How do I fix this?

After upgrading last week, i can no longer print multiple page print outs off of any website, without the secondary pages clipping off content. Page 1 prints fine... the remaining pages do not.
pages print fine in both safari and chrome...

If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
If there are specific tasks you need help with:
http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
Is a good resource.
Peter

Edge Animate Menu with Page Highlights

Is there a way to make a menu in Edge Animate so that when you are on a certain page, that page is highlighted on the menu?
I want to make it a server side include 

Move to Edge Animate CC

Will an .edge file made with Adobe Edge Animate 1.0 work and load in Adobe Edge Animate 3.0?

I had the beta version of Adobe Edge Animate, and when it was released I was able to download version 1.0 for free, and it is still installed on my computer today.
The problem is I might get a new computer, and I'm just wondering if my old projects that I made with that version of Adobe Edge will work correctly if I purchase Edge Animate CC?
Does Edge Animate CC support backwards compatibility all the way back to 1.0?

Hi,
Also, sometime it depends upon the feature as well. it is deprecated in latest release then you may get error or warning.
Please download trial version of Edge Animate CC 2014 and test your project.
https://creative.adobe.com/products/download/animate
Regards,
Devendra

How to Load flash after webpage finished loading

Hello everyone, I have a problem of running flash on my
browser. My flash started to load
when my webpage is downloading. I want the browser to
completely loaded before the flash starts.
Is there a way of solving this problem? My flash file is
small compare with my webpage, so
it alway starting to load before the browser.
Please help

Also use the alternate installers for Flash Player 11: http://forums.adobe.com/thread/909550

Tab title is changing to "connecting" after page has loaded

Yesterday, my tabs in firefox started to act a little bit odd. When (only when) tab has loaded few seconds pass and tab title changes to "Connecting...". Before title change to "Connecting...", tab title is as it should be - webpage title. And this is happening to all tabs. I have opened like 12 tabs all the time. Is someone familiar with this situation? I don't have tab renamizer installed. Thanks

Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.

Edge Animate Content not working in DreamWeaver

I already insert>media>EdgeAnimateContent into the div I wanted it in. I uploaded all my supporting files to my server. Not showing up in preview or when I make the page live.

When I go to DW Live View It automatically logs me into the site and I don't get to see the index page that I am trying to put this on. This is what I see in design view...
When I publish it the An file doesn't show. When I refresh the page the "Log In" div is in the correct place for a fraction of a second and then snap up to the top (where the An should be).

How to embed Edge Animate 2014.1 object in html page?

Since there is no more *_edgePreload.js file, I don't know how to embed my animation into an html page. I don't wanna use iframe.

I am new to Edge Animate, and I've created my first project and I believe that it is nearly web ready. The problem is that I already have a site that was not built with Adobe products... again, I'm new here.
I have scoured the internet trying to find out how to implement this job into our site, but the only answers that I find are statements saying that it works with this builder or that one...or that it can be put in with Dreamweaver and instructions on how to do so.
We built this site using OptimizePress 2 (a site/page builder for WordPress) , and I would need to put in the created content that I am speaking of via a custom code/html block that I can put on the page in the location I desire the finished product to be located.
How do I go about adding the finished product to the site... is there a step by step list of instructions on how to do this? There will come a time soon where I will want to make pages using only Edge Animate content for things like landing pages, welcome pages, error pages, etc... but for now I would like to be able to put things in like this that I've built.
It's just a scrolling "ticker-style" schedule of our session hours. People seem to have trouble scrolling to find them, or even clicking on "Schedule" on our membership side, so we are putting it up in bright scrolling letters.
One of the guys that helps me with site work managed to get it here.... Trading Scheudle Roller but I need to get this to a code block (element as OP2 calls it) to display this in a particular location. I'm not sure if it's even done right the way he has it in there now
I'm sorry this got long winded, but any help...instruction or tutorial would be greatly appreciated.
Thank you,
Brandon D Gibbs
The Lion's Den Trading, LLC
https://thelionsdentrading.com

Cpu not releasing after page load

I'm a newby to flash. I need to show movie clips based on the
XML data. The problem is after page is loaded with flash file,
still CPU is not getting released. What am I doing wrong? After
page is loaded with the flash file, I want the CPU to go its
original utilization.
Here is the sample code.
import flash.geom.Matrix;
import flash.geom.Point;
import flash.display.*;
import flash.geom.*;
import mx.services.*;
_root.lineStyle(1, 0x0000FF, 100);
var mcMapContent = map_sp.content;
var my_xml:XML = new XML();
my_xml.ignoreWhite = true;
var number_fmt:TextFormat = new TextFormat();
number_fmt.font = "NumFont";
number_fmt.size = 4;
var fileName:String;
if (!fileName)
fileName = "test1";
if (_global.styles.List == undefined)
_global.styles.List = new mx.styles.CSSStyleDeclaration();
_global.styles.List.setStyle("themeColor", 0x3366CC);
_global.styles.List.setStyle("color", 0x000000);
_global.styles.List.setStyle("backgroundColor", 0xFFFFFF);
_global.styles.List.setStyle("borderStyle", "solid");
_global.styles.List.setStyle("borderColor", 0x000000);
_global.styles.List.setStyle("rolloverColor", 0x5a6970);
_global.styles.List.setStyle("scrollTrackColor", 0xEEEEEE);
_global.styles.List.setStyle("selectionColor", 0xCCCCCC);
my_xml.load("XML/" + fileName + ".xml");
my_xml.onLoad = function(success)
var currentNode:XMLNode = my_xml.firstChild.firstChild;
var LoopI:Number;
var tmpDepthLevel:Number;
var X1:Number, Y1:Number, Length:Number, Width:Number;
var Code_str:String;
currentNode = currentNode.firstChild;
tmpDepthLevel = mcMapContent.getNextHighestDepth();
try
for (var child_xmlnode = currentNode; child_xmlnode != null;
child_xmlnode = child_xmlnode.nextSibling, i++)
TotalVertex_int =
Number(child_xmlnode.attributes.VERTEX_COUNT);
X1 = child_xmlnode.attributes.X1;
Y1 = child_xmlnode.attributes.Y1;
Width = Number(child_xmlnode.attributes.WIDTH);
Length = Number(child_xmlnode.attributes.LENGTH);
Code_str = child_xmlnode.firstChild.nodeValue;
var my_mc:MovieClip = mcMapContent.attachMovie("MyRect",
Code_str, tmpDepthLevel, {Name:Code_str});
tmpDepthLevel++;
my_mc._x = X1;
my_mc._y = Y1;
my_mc._width = Width;
my_mc._height = Length;
newMainColor = new Color(my_mc.rect_mc);
my_mc.Num_txt.setTextFormat(number_fmt);
name_fmt.font = "NumFont";
newMainColor.setRGB(0xFF99FF);
my_mc.Num_txt._yscale = my_mc.Num_txt._yscale * (Width /
Length);
my_mc.Num_txt._y = (20 - my_mc.Num_txt._height);
my_mc.Num_txt._x = 0;
catch (myError:Error)
trace("error caught: " + myError);
finally
//trace("No Error");

I'm a newby to flash. I need to show movie clips based on the
XML data. The problem is after page is loaded with flash file,
still CPU is not getting released. What am I doing wrong? After
page is loaded with the flash file, I want the CPU to go its
original utilization.
Here is the sample code.
import flash.geom.Matrix;
import flash.geom.Point;
import flash.display.*;
import flash.geom.*;
import mx.services.*;
_root.lineStyle(1, 0x0000FF, 100);
var mcMapContent = map_sp.content;
var my_xml:XML = new XML();
my_xml.ignoreWhite = true;
var number_fmt:TextFormat = new TextFormat();
number_fmt.font = "NumFont";
number_fmt.size = 4;
var fileName:String;
if (!fileName)
fileName = "test1";
if (_global.styles.List == undefined)
_global.styles.List = new mx.styles.CSSStyleDeclaration();
_global.styles.List.setStyle("themeColor", 0x3366CC);
_global.styles.List.setStyle("color", 0x000000);
_global.styles.List.setStyle("backgroundColor", 0xFFFFFF);
_global.styles.List.setStyle("borderStyle", "solid");
_global.styles.List.setStyle("borderColor", 0x000000);
_global.styles.List.setStyle("rolloverColor", 0x5a6970);
_global.styles.List.setStyle("scrollTrackColor", 0xEEEEEE);
_global.styles.List.setStyle("selectionColor", 0xCCCCCC);
my_xml.load("XML/" + fileName + ".xml");
my_xml.onLoad = function(success)
var currentNode:XMLNode = my_xml.firstChild.firstChild;
var LoopI:Number;
var tmpDepthLevel:Number;
var X1:Number, Y1:Number, Length:Number, Width:Number;
var Code_str:String;
currentNode = currentNode.firstChild;
tmpDepthLevel = mcMapContent.getNextHighestDepth();
try
for (var child_xmlnode = currentNode; child_xmlnode != null;
child_xmlnode = child_xmlnode.nextSibling, i++)
TotalVertex_int =
Number(child_xmlnode.attributes.VERTEX_COUNT);
X1 = child_xmlnode.attributes.X1;
Y1 = child_xmlnode.attributes.Y1;
Width = Number(child_xmlnode.attributes.WIDTH);
Length = Number(child_xmlnode.attributes.LENGTH);
Code_str = child_xmlnode.firstChild.nodeValue;
var my_mc:MovieClip = mcMapContent.attachMovie("MyRect",
Code_str, tmpDepthLevel, {Name:Code_str});
tmpDepthLevel++;
my_mc._x = X1;
my_mc._y = Y1;
my_mc._width = Width;
my_mc._height = Length;
newMainColor = new Color(my_mc.rect_mc);
my_mc.Num_txt.setTextFormat(number_fmt);
name_fmt.font = "NumFont";
newMainColor.setRGB(0xFF99FF);
my_mc.Num_txt._yscale = my_mc.Num_txt._yscale * (Width /
Length);
my_mc.Num_txt._y = (20 - my_mc.Num_txt._height);
my_mc.Num_txt._x = 0;
catch (myError:Error)
trace("error caught: " + myError);
finally
//trace("No Error");

Using af:clientListener after page load

Hi,
I need to run a js function after* the page finishes loading.
I tried to use <af:clientListener type="load" method="fillProjectList"/>, but the script starts running before the table on the page finished loading.
The table has: clientComponent="true"
How can I make the script to start runng only after all table components are loaded?
Thank you,
Nina

Ah.. i guess it will not work as you cannot do any UI activity after the render response phase. May be try this
Javascript into JSPX and run after page is loaded?

After web page finish, mouse movement and scroll up down very slow.

After web page finish loading,both mouse movement and scrolling that page is very slow.
I compare the same page on MS internet explorer and have no problem.
p.s. I'm using intel core 2 dual on 4gb ddr3 windows vista 32bit.
== URL of affected sites ==
http://www.sanook.com

Thanks for both of these answers. I am finding that I do not
like the totally manual method all that much (but it does work).
Using the PrintScreen-before-and-after-each-action method seems a
little better for me. Either method requires way too much editing
for a simple "let me show you" movie. I have moved on to version 3
since it seems to behave a little better.
I think it is odd how sometimes Captivate puts an action
(like a mouse click) on a background from *two* slides previous.
Why would it ever go backward - especially skipping over the
previous slide to get an even older screen. If I have forced a
screen capture, you would think it would stay with that.
I realize that I am not using Captivate where its strengths
seem to be (eLearning) but there must be a lot of people capturing
demos of web-based material. Does everyone have this
problem?

Play Edge Animate content AFTER Page finishes loading

Similar Messages

Maybe you are looking for