Play files out of a firewire port with Quicktime 7 pro?

Does anyone know if this is possible?
I playback preview files (mov,dv, etc) on quicktime pro all the time, and it would be helpful if I could view them on my plasma via my firewire port (the same way I do in Logic or Pro Tools).

I don't 100% understand what you are asking - your firewire port on your mac or on an external drive?
I am playing .mov files from a MacMini to a Panasonic 65 inch plasma via DVI cable... The plasma is working basically as a HUUUGE computer monitor. Not a direct answer to your question, but I know DVI directly from your Mac to the Plasma (provided the plasma has DVI in) works if you need an alternative. If the plasma only has VGA in, you can get less quality, but still success with the DVI-RGB converter from your mac to the plasma.

Similar Messages

HT204382 Got a 75MB video file tagged ".flv" Won't open with Quicktime. What do I need?

Got a 75MB video file tagged ".flv" Won't open with Quicktime. What do I need?

Download vlc player. It plays most formats of video and audio.
Ryan

I need lots of USB ports with New Mac Pro, now what?

because I'm in the audio business I needs lot of USB ports with my Mac Pro. On my current 2008 machine, that's not really an issue, with 5 ports on teh MP itself and I installed some USB hubs over PCIe that give me a total of 13 port. I'm not really sure what is the best way to get that amount on the new MP.
Oh, and I really like the stability of my current set up. Before I went with an external USB Hub that always gave me headaches with ports not being recognized.

The only two things I found so far are:
a/ going back to the external USB hubs, which I find very frustrating to work with, because instable with connection and I would need to add some interface to go from USB to TB (which are also rather expensive at the moment)
b/ use some external PCIe enclosures that are really expensive.
So I havent really found the right solution for my situation. Which makes me hesitant to migrate to new MP at the moment.

Is anyone having a problem connecting 400 firewire thru an adapter for the 800 firewire port on a Macbook Pro 2011? It does a kernel panic every time I connect it. Is there a "proper way" to connect it?

Is anyone having a problem connecting 400 firewire thru an adapter for the 800 firewire port on a Macbook Pro 2011? It does a kernel panic every time I connect it. Is there a "proper way" to connect it? Just in case it makes a difference I am trying to hook up an Avid Mbox Pro for Pro tools.

What is the part number and model of Firewire adapter?
I have used them in the past without any problems whatsoever.
Allan

I am receiving excel files, which I need to convert with my macbook pro...I did this with export, but the file I got didnt show graphs as it should...can you help...do I need to buy excel for Apple computer, or is there any easier way of dealing with it..

I am receiving excel files, which I need to convert with my macbook pro...I did this with export, but the file I got didnt show graphs as it should...can you help...do I need to buy excel for Apple computer, or is there any easier way of dealing with it..does App "Numbers" help here?

Numbers should be able to read Excel files without any problems. If Numbers does not read the graphics properly then you can try Excel Online. https://office.live.com/start/Excel.aspx

Helo, anybody knows what the chipset controller of the firewire port's mac book pro 13 i5 i7, please thanks

helo, anybody knows what the chipset controller of the firewire port's mac book pro 13 i5 i7, please, thanks!

Try the notebook forums, not the workstation community.
http://www.apple.com/support/macbookpro
or Google

With Quicktime 7 Pro for Windows, is there a plug-in or add-on to have the screen recording capability?

With Quicktime 7 Pro for Windows, is there a plug-in or add-on to have the screen recording capability?

Screen recording is not a feature of QuickTime Player 7 Pro (Mac or Windows).
QuickTime X (ten) is Mac only software that does include screen recording features.

Firewire as audio out - can i send my iTunes out through my firewire port and into a DAC?

I have a 5 year old (retired) MacBook with firewire 400 and 2 USB 2 ports. I want to use it as my music source for a fine stereo system. I want to know if I can use my firewire port to ship my digital music signal out to a DAC before sending it to my pre-amp in analogue format. OR, can I use the optical digital audio out in the heaphone jack to do it? What is the bandwidth of the optical out?

You do not need .Mac in order to send photos by e-mail. It sounds like you use ATT as you internet provider. Have you configured Apple Mail to be able to send e-mail yet? Can you send an e-mail text message OK?
If you haven't yet gotten Mail configured to work with your ATT account a quick call to ATT should give you all the information you need. Setting up Mail is easy.
Post back with further questions.
Regards,
Steve M.

File Name in the Send Port with PGP Encryption

Hello,
The File Name in the Send Port should be set with the mask like ABC.txt.pgp. Since I have used the PGP Encryption Component it is generating the File name like ABC.pgp.txt.pgp. But what I need is just the ABC.txt.pgp. How can be this be done. Any help is
greatly appreciated.
Thanks

What you are seeing is the expected behavior. If you are referring to this:
https://code.msdn.microsoft.com/windowsdesktop/BizTalk-Sample-PGP-ebcbc8b2
or one of it's derivatives, it will internally modify FILE.ReceivedFileName to append .pgp if that property is set.
So, if you use just %SourceFileName%, you will likely get the desired result. Otherwise, you will have to explicitly set FILE.ReceivedFileName to ABC.txt somewhere before the PGP component.
You can also modify the source code to remove this behavior.

Playing files not in the music directory with mpd

Can mpd play files that are not in it's music directory?
if so How?

um - i think that defeats the point of the daemon? i think it assumes you have all your music in one place - which i guess most people do - playing one song at random is not really it's game as far as i know

Using a non-firewire cam with quicktime broadcaster

I have this very nice ptz analogue video conferencing camera... worth about $2000 to tell the truth. I would love to be able to use it with quicktime broadcaster. The problem is the video output is S-video, not fire wire. Does anyone know of some sort of hardware adapter or something that can take the S-video signal and output it in such a way that will trick quicktime broadcaster into thinking that there is a firewire video cam connected?
any suggestions would be appreciated
G4 Dual Mac OS X (10.4.5)

I had thought of that but I am worried that i would shell out the money for one only to find out that Broadcaster doesn't recognize it. The documentation for Broadcaster claims that it requires a firewire camera. I am wondering if anyone has had any success or failure with this?
Not a QT Broadcaster user myself, but do have v1.5 installed on my G5. On reading your query, I tested it with an old, original (unstable stabilized) Dazzle Hollywood DV-Bridge and newer Canopus ADVC-300 converters. Both were correctly identified by name if properly connected when QT Broadcaster application is opened. And, although "hot-swapping" the converters did not cause any problems while QT Broadcaster is running, neither did it force the software to rescan and identify the "change" in hardware device.
For the purpose of the tests Nikon digital still cameras (990 and D-70) with analog video output and a Sony camcorder with analog and digital outputs (in both tape and throughput modes) were used as the source and the output was recorded/saved as a QT movie file by QT Broadcaster. While I could only get the D-70 to output singleframes (didn't take the time to look for the book), all other sources produced much better quality than expected using the default DV to QVGA/15fps settings -- even when using an old 1930's B&W movie as the taped source.
For what it's worth ...

I downloaded a movie with Quicktime 7 Pro onto a DVD, but it won't play in my DVD player.

I downloaded a movie from the internet using Quicktime 7 Pro. I put it on a DVD so that I could watch it on my television. The disc isn't recognized and won't play on my DVD player. What can I do to get it to play?

In addition to what Gary listed - VisualHub (direct download). If you have issues with the direct download, you can obtain VisualHub directly from this site - http://www.wyodor.net/MoreEmbed/embedmedia.html

Encoding to high profile h.264 with quicktime (7 pro) export

Is there anyway to encode high profile h264 with quicktime export ?
Been using a canon HF100 for years now, and my goal is to edit and export my movies to h264 with the least quality lost. I can edit(trimming and merging) without quality loss. My endresult is in AIC codec, but when I export it to H264 in quicktime, in the highest settings, I can still see quality(or actually, color depth) loss in low light scenes.
Even with a bitrate which is almost identical to the AIC file...
I have a 130.2Mb (52.7Mbps) h264 main@Level 5 with 2 reference frames/second clip that looks worse the the original AIC file(56.9Mbps) of 143.8Mb
The canon HF100 records in high profile at level 4.0 (high@L4) with 17Mbps. It does 2 reference frames per second and CABAC.
So in theory exporting my projects at 17Mbps should be enough, if only the right settings where available in quicktime export.
Is there anyway to convert AIC to High profile settings, CABAC(available in main profile but not used bij quicktime in h264 output) on the MAC ?
My workflow:
1. I use shedworx VoltaicHD to convert my AVCHD files to AIC (pretty much lossles)
2. I use Imovie 6 to create a new Project in the following structure: HDV1080i
3. I don't import the AIC files with iMovie but I dump them with Finder in the "media" folder of the Imovie project.(This way I can maintain the 1920x1080 resolution, with importing it gets 1440x1080)
4. Then I open the project in Imovie, open the trashcan and see my movie clips.
5. Then the trimming, cutting and merging begins, no use of effects(adding effects creates 1440x1080 video)
6. Time for export with quicktime h264 codec.

Hi MartinR,
Some answers on your thoughts:
"You have an AVCHD camcorder. Where did you get the technical information that it records HiProfile/Level 4/2 ref frames per sec/CABAC?"
-I'v dropped some original mts files from my camera on a program called "mediainfo" from sourceforge net.
"VoltaicHD's conversion isn't exactly 1920x1080, either. Open one of your AIC files in QT Player, do Window > Show Movie Inspector and tell us what it says for format and fps. 1440x1080? 1888x1062?"
-Both mediainfo and quicktime (7 pro and the new quicktime) show in their info that the movie format from voltaicHD file is 1920x1080.
But I can remember I've seen the 1888x1062 resolution in the info in the past. Maybe things where changed by a new version of voltaic or an update by quicktime ?
" certainly understand your efforts to get the results you want with what you have on hand. However you will be better off with iMovie11 and/or Final Cut Express 4 or Final Cut Studio 6. FCP 6 by the way supports ProRes which, if you are very driven for the highest technical qualities, would be the way to go."
I thought about buying imovie 11 in the app store. For 11,99 euro's it's a bargain!
But a little search on the forums kept me from buying it.
My camera puts out interlaced files, even when I record progressive. This is done by most camera manufacturers for compatibility on blu ray players and older lcd and plasma tv's.
Now it seems that if you use effects in imovie 11, it drops half the fields, resulting in 960x540 resolution...In that case imovie 6 with 1440x1080 supported effects is still better.
The same 1440x1080 limitations seems to exist in Final cut express 4.
I know the backdoor in imvie06 works, you can see the 1920 to 1440 resolution drop with your own eyes when effects are added. The drop is only visible in the frames that contain a special effect, the rest of the exported movie is untouched and still 1920.
I did some thinking, and what bothers me the most is that exporting the movie results in loss of color depth/detail. I could imagine that if I could use Prores422 instead of AIC, which is only available in FCP (999Euro's!). That the end result is better, but I'm not sure.
Could be that the colors of the original movie file are spread more over the range because it supports 10 bit sample depth instead of 8. Even when that is true, I am not sure if the h.264 codec will tread it different and maintains some more color depth.
And for fact the avchd files are 4:2:0 and not 4:2:2.
Do you or anyone know if there is any different in quality in an exported to h.264 pro resolution file or an AIC file. Even when the source is 8 bit 4:2:0 ?

Partial streaming with quicktime 7 pro

When a file is clicked (such as a trailer), the file only goes 11 seconds and halts. The cache is turned way up, to higher than the file size (124mb) and no selection is available to download or save the file. Is there an option in quicktime that I am missing that will allow the entire file to finish streaming? I am on a 1mb/sec line on an college LAN, so connection is not a problem, and i have 1gb of RAM.

Most of the trailers "download" over HTTP servers and are not "streamed" using RTSP servers.
The settings you adjusted in the QT Control Panel allow you to set the "cache" size and your connection speed. You seem to have them correct so I suspect a problem with the file.
Try a smaller file sized trailer. If one works they all should work.
Some files require a very fast computer and a newer (better) video card. If your computer doesn't meet the requirements for HD trailers you will not be able to view them.

I am currently using the firewire port on my macbook pro to record dv from my camera. Can I capture video/audio using my USB port as well?ra

I've been connecting a sony PD170 via firewire to my Macbook pro to record directly using Quicktime pro. Can I use the usb port (and mini audio in) to accomplish this with a camcorder that doesn't have a fire wire port but does have USB out?

It could just be a bad disc - I use Verbatim and have only had one fail in a ten-year time period. Try getting a batch of Verbatims and see if you have any problems. I didn't even know that there were Kodak branded discs...
Clinton

Play files out of a firewire port with Quicktime 7 pro?

Similar Messages

Maybe you are looking for