Play iTunes with iPhone Remote fails when new version of iTunes

When there is a new version of iTunes, a dialog is presented by the application. This dialog seems to prevent one from playing iTunes via the iPhone Remote app (at least if using AirPlay speakers).
Just a tip.
Another #FAIL for iTunes (having upgrade dialogs, which can appear at any time, ruin the functionality of the application is just lame)
Message was edited by: SwedePetter

Right, that checkbox was enabled by mistake - thanks.
Still a pretty silly stopper, if my diagnosis was correct.

Similar Messages

I use a bluetooth headset with iPhone 5 but when I ask Siri to read my email she says I must unlock my phone first. If I take the phone out of my pocket I might as well just read the email then. Is there a way to fix this?

I use a bluetooth headset with iPhone 5 but when I ask Siri to read my email she says I must unlock my phone first. If I take the phone out of my pocket I might as well just read the email from the phone screen. Is there a way to fix this so the phone doesn't have to be unlocked?

Apple, as I'm sure you know, now manage official phone 'unlocks' directly rather than the Newtork doing so.
When a GSM Network Provider buys a consignment of iPhone's they are locked to that carrier and may only be officially unlocked if said carrier requests it. If so, it is Apple who do this, via iTunes.
I am therefore inclined to think that part of the any generic iTunes syncing process involves the transmission of key hardware data, including IMEI, to Apple whenever the handset is synced.
If this is the case and, as each iTunes account is linked to a credit card, were Apple to maintain a database of genuinely stolen phones (ones reported to Police) they could advise said Police force when a stolen phone stuck its metaphorical head over the parapets once again? They would be able to identify the name & address of the new user.
I have spoken to the Police here in Ireland today and they regularly engage with Apple on such matters.
This may not be tracking as we know it Jim, (not using GSM Triangulation or GPS) but it's arguably even more targetted and leaves an indelible fingerprint of guilt on the thief.
The laws here are simple in this regard, if you are in possession of stolen property, knowlingly or otherwise, you forfeit the goods once the Police show up. Whether you get prosecuted depends on whether you stole the goods or were duped into purchasing them.

TS5376 I'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly.

'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?

Try Troubleshooting issues with iTunes for Windows updates.
tt2

Itunes.itl cannot be played because it was created by a newer version of itunes

I cannot open itunes. I am getting this error message: itunes.itl cannot be played because it was created by a newer version of i tunes.

Hello AS1590,
That definitely sounds frustrating.
I recommend completely uninstalling iTunes and all related components, as outlined in this article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Then, once you have removed the components in order, let's reinstall via http://apple.com/itunes/download
If the issue persists, please refer to the following article:
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/ht1451
Thanks,
Matt M.

Any idea when new version of e90 is coming

Any idea when new version of e90 is coming which will emanate all previus problems.

Available in Germany..?
It is not even available to Nokia staff in Finland ..yet.
I assume that you base this statement on the links to a German web site on All About Symbian.
This was to a German message board ..like this one but run by Non Nokia people...it showed some photographs of what was claimed to be the "new E90"..
But the text (which was in German) said that it was a mock up based on what had been seen on a Nokia stand at a World Mobile phone conference in I believe Barcelona.
Photos taken of the real unit on the Nokia stand showed a black E90 with flush key pad, and with apparently new firmware, this was shown by one screen shot.
The links seem to have disappeared.
Nokia were reported to have said at Barcelona that the unit "should be" available by end 1st Q.
My contact with Nokia confirms that this is "hopefully" the case.
On the Nokia forum for designers..Nokia have instigated a drive to motivate more 3rd party SW houses to "think E90 and it's large display". So Nokia have decided to re-launch the E90.
But all this does nothing to please those of us who have already bought E90. There is no way Nokia are going to replace the cases of all E90s already in the field.

Any ideas when new version be out for minor fixes?

HI all any ideas when new version be out for minor bug fixes? like the mem usage for some people that see it and the like. i personal have know issues with mem usage.

If the memory isn't released when closing windows and tabs or the program is quit, or if plug-ins are eating up memory, I think it is loading depending on available memory, so maybe it is just written for modern systems. Vista caches as much as possible, more memory, more gets cached.
On Apple's OS X, it easily eats up 300-900MB on a 4GB system.
If you want a smaller footprint, just use Firefox 3.0 (Minefield).

Autocomplete in search box dropdown list fails in new version 5

autocomplete in the search box dropdown fails in new version 5

I did as you suggested, although after I clicked "manage Search Engines" there was no Show search suggestions to be clicked on that Window. If I then clicked on Search there was an option to select "Suggest searches as type" and "Automatically search when you select from the drop down list".
Both of these options were already selected so it's still not working.
This first happened in Firefox 4. it's still has not been resolved.

I purchased Lightroom 5 in December 2014. It was my understanding that I would get free upgrades when new versions come out. I attempted to download LR 6 and it said that the download was happening but there was no progress bar showing. I left the down

I purchased Lightroom 5 in December 2014. It was my understanding that I would get free upgrades when new versions come out. I attempted to download LR 6 and it said that the download was happening but there was no progress bar showing. I left the downloading screen open for 3 hours but nothing happened.

Robert,
You can purchase Lightroom 6 as a part of the creative cloud photography package, part of creative cloud, as a stand alone product or as a product upgrade.
If you purchased lightroom 5 as a perpetual product rather than the creative cloud, you would need to purchase an upgrade to Lightroom 6. Udpates are free for stand alone versions, but upgrades need to be purchased.
If you need to purchase an upgrade to a perpetual license that you downloaded or purchased at a store, see this link: Products . Scroll down to lightroom and click "buy". Click on the selectable text by " I want to: "and select "upgrade".
If you are trying to install Lightroom CC 2016 as a part of a creative cloud subscription, you should be able to download and install Lightroom CC 2015 from the Creative Cloud site. Since Lightroom CC is a new product, it will not show as an update in the Adobe Application Manager. Instead, press the install button next to Lightroom in the Application manager. If you don't see "install" by Lightroom in the application manager, please first try signing out and back in: sign in and sign out of the Creative Cloud desktop app
If you still have issues, see option 2 in this link:
Lightroom doesn't launch or quits automatically after splash screen
Regards,
Pattie

New MacBook Pro not working with iPhone remote

Hi all,
I absolutely cannot get the iPhone remote app to work with itunes for whatever reason!
it's driving me crazy never had any issues on my old macbook, its defo on the same wifi, i can ping it etc, I'm faily handy with OSX and the like as i'm a software developer, so I know it's not a firewall issue and the phone is on wifi.
it just doesn't pop up to let me enter the code in iTunes under devices when I'm trying to register the Phone with the machine,
for the record the phone has been synced with the itunes library in question and I have clicked the forget all remotes button in iTunes prefs, and the 'look for iphone remotes' box is checked
so I've pretty much done everything bar uninstall itunes, is that really necessary? is it worth deleting the itunes prefs file??
Thanks for any advice,
Cheers,
John

Have you tried wiping the remote app from the iphone and starting over ?

HT201210 error 3014, can't restore iPhone after updated the new version of itune

after updated the new version of itunes, my iphone can't back up and restore.
Why everytime update the new version of itunes have problem????

See Network connection or download errors
Error 1479: This error occurs when trying to contact Apple for an update or restore. Quit iTunes, disconnect from USB, restart the iOS device, reconnect the device to the computer, then launch iTunes and attempt to update or restore again.
Error 1639: See this article for resolution.
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good networ

Unit test runs perfectly fine with NUnit but fails when run from TestExplorer

Hello all,
I have a TestProject, Harmony.Tests. In there, I have a method AddApplicationEvent()
which calls another method Send(InvokeRequestMessage requestMessage) which calls a webservice (OperationHandlerBrokerWebService).
The code snippet looks like this. This is not the complete code but a part where we are calling the web service. It fails on the underlined Italic line of code.
OperationHandlerBrokerWebService brokerService = new OperationHandlerBrokerWebService();
brokerService.UseDefaultCredentials = true;
brokerService.Url = address;
brokerService.Timeout = timeoutInMilliseconds;
byte[] serializedResponseMessage = brokerService.InvokeOperationHandler(serializedRequestMessage);
The same test works and passed fine when I ran it with NUnit, but failed with following exception when I tried to run it from TestExplorer.
Test Name: AddApplicationEvent
Test FullName: N4S.Harmony.Tests.CaseManagement.HarmonyFacadeTests.AddApplicationEvent
Test Source: d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\CaseManagement\HarmonyFacadeTests.cs : line 665
Test Outcome: Failed
Test Duration: 0:00:00.296
Result Message:
SetUp : Message returned System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.ArgumentException: Invalid token for impersonation - it cannot be duplicated.
at System.Security.Principal.WindowsIdentity.CreateFromToken(IntPtr userToken)
at System.Security.Principal.WindowsIdentity..ctor(SerializationInfo info)
at System.Security.Principal.WindowsIdentity..ctor(SerializationInfo info, StreamingContext context)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._SerializationInvoke(Object target, SignatureStruct& declaringTypeSig, SerializationInfo info, StreamingContext context)
at System.Reflection.RuntimeConstructorInfo.SerializationInvoke(Object target, SerializationInfo info, StreamingContext context)
at System.Runtime.Serialization.ObjectManager.CompleteISerializableObject(Object obj, SerializationInfo info, StreamingContext context)
at System.Runtime.Serialization.ObjectManager.FixupSpecialObject(ObjectHolder holder)
at System.Runtime.Serialization.ObjectManager.DoFixups()
at System.Runtime.Serialization.Formatters.Binary.ObjectReader.Deserialize(HeaderHandler handler, __BinaryParser serParser, Boolean fCheck, Boolean isCrossAppDomain, IMethodCallMessage methodCallMessage)
at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Deserialize(Stream serializationStream, HeaderHandler handler, Boolean fCheck, Boolean isCrossAppDomain, IMethodCallMessage methodCallMessage)
at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Deserialize(Stream serializationStream)
at N4S.Forms.OperationHandlerBroker.AMessage.DeserializeMessage(Byte[] serializedMessage)
at N4S.Forms.OperationHandlerBroker.WebServiceServer.BrokerService.InvokeOperationHandler(Byte[] serializedInvokeRequestMessage)
--- End of inner exception stack trace ---
expected: <0>
but was: <1>
Result StackTrace:
at N4S.Harmony.Tests.TestHelper.InvokeOperation(OperationHandler handler, OperationHandlerInput input, Boolean expectedToWork) in d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\TestHelper.cs:line 136
at N4S.Harmony.Tests.TestHelper.LoginAsUser(String username, String password) in d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\TestHelper.cs:line 394
at N4S.Harmony.Tests.TestHelper.Login(TestUserName requestedUser) in d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\TestHelper.cs:line 377
at N4S.Harmony.Tests.TestHelper.LoginAsAdvisor() in d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\TestHelper.cs:line 230
at N4S.Harmony.Tests.CaseManagement.HarmonyFacadeTests.Login() in d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\CaseManagement\HarmonyFacadeTests.cs:line 76
at N4S.Harmony.Tests.CaseManagement.HarmonyFacadeTests.SetupTest() in d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\CaseManagement\HarmonyFacadeTests.cs:line 67
I am not sure what causing the issue. I checked the Credentials, Windows Identity during both the test run and there is no difference. Please advise !!
Thanks,
Deepak

Hi Tina,
Thanks for your reply.
I do have NUnit adapter installed. I even noticed that the test runs fine with NUnit GUI and also if I run it through Resharper Test Explorer window.
As you can see in the image above the same test is passed when I ran it from Resharper Unit Test Explorer window but fails when I ran it from Test Explorer window. I also captured the information on fiddler.
There was a significant difference in the Header Content length. Also under the User-Agent property the protocol versions are different.
Not sure why VSTest ExecutionEngine is picking a different version.
The UnitTest in question is calling a webservice method which in turn calls a method from another referenced project.
Web Service class
using System;
using System.Web.Services;
using N4S.Forms.OperationHandlerBroker.Server;
using NLog;
namespace N4S.Forms.OperationHandlerBroker.WebServiceServer
/// <summary>
/// The operaton-handler broker service.
/// </summary>
[WebService(Description = "The N4S Forms Operation-Handler Broker Web-Service.", Name = "OperationHandlerBrokerWebService",
Namespace = "N4S.Forms.OperationHandlerBroker.WebServiceServer")]
[WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)]
public class BrokerService : WebService
{ /// <summary>
/// Calls <see cref="HandleRequest"/>. Updates performance-counters.
/// </summary>
/// <param name="serializedInvokeRequestMessage">the binary-serialized <see cref="InvokeRequestMessage"/></param>
/// <returns>the binary-serialized response message</returns>
[WebMethod(BufferResponse = true, CacheDuration = 0, Description = "Invokes the requested operation-handler and returns a binary-serialized response-message.", EnableSession = false)]
public byte[] InvokeOperationHandler(byte[] serializedInvokeRequestMessage)
logger.Trace(Strings.TraceMethodEntered);
PerformanceMonitor.RecordRequestStarted();
InvokeRequestMessage requestMessage = (InvokeRequestMessage) AMessage.DeserializeMessage(serializedInvokeRequestMessage);
InvokeResponseMessage responseMessage;
try
responseMessage = HandleRequest(requestMessage);
PerformanceMonitor.RecordSuccessfulRequest();
catch (Exception)
PerformanceMonitor.RecordFailedRequest();
throw;
finally
PerformanceMonitor.RecordRequestEnded();
logger.Trace(Strings.TraceMethodExiting);
return AMessage.SerializeMessage(responseMessage);
UnitTest snippet
OperationHandlerBrokerWebService brokerService = new OperationHandlerBrokerWebService();
brokerService.UseDefaultCredentials = true;
byte[] serializedResponseMessage = brokerService.InvokeOperationHandler(serializedRequestMessage);
Please advise.
Thanks,
Deepak

My iphone 5 needs a newer version of iTunes than I have, but I can't download the new version because my OSX version is too old... Help!

We have an iphone 5 but iTunes won't recognize it because we need a newer version (currently 10.6.3). After trying to download newest version of iTunes, it tells us we can't finish the download because we need a newer version of OS X (currently 10.5.8)... there aren't any software updates available so I'm at a loss!

fep516 wrote:
Would you recommend upgrading again to Mountain Lion after the Snow Leopard upgrade?
Yes, Lion and Mountain Lion are a significant upgrade from Snow Leopard, and they fully support iCloud syncing.
First verify that your model number supports Mountain Lion (I'm pretty sure it does), then check how much RAM you have. Your model only comes with 1 GB (https://support.apple.com/kb/sp16), which is inadequate for later versions. Upgrade to 4 GB if you haven't already. The upgrade is a do-it-yourself project that will take 5 minutes if you are at all handy with modern electronics; you just remove the 1 GB DIMM and insert 2 2GB DIMMs. Here's an example of a memory upgrade kit: http://www.amazon.com/Kingston-Modules-Macbook-KTA-MB667K2-4GR/dp/B001265GI2/ref =sr_1_2?ie=UTF8&qid=1362357462&sr=8-2&keywords=imac+memory+2gb.
This is not an endorsement of this vendor or this manufacturer; it is just a reference for the type of memory you need. (Not that there's anything wrong with Amazon or Kingston.)

Problem with making remote toppics when linking with external chm

Hi to everybody,
i m novice to robohelp html when i am creating chm files from
my exsisting project that is a robohelp word project which take
input doc file in Robohelp word and create .hpj poject and then i
open this .hpj project into robo help Html to create chm file .
when i m opening this project into robohelp html it is making .xpj
project from the hpj project .
but at this time poject has some links with external chm but
when i m making hyper link with external chm using Remote toppic
option this option i couldn't unable to found any where in robohelp
html plz anyone can know help me out from this
probelm....................plz...................i need help
,,,,,,,,,,,,,,,,,,,if anyone know how to remote toppic occur in
such situation plz let me know,......
Thx
Rgard's

Hi Ruziyo and welcome to the RH forums.
If you are opening up your project via the XPJ file in
RoboHelp HTML the remote topic should be able to be found by:
- Highlighting what is to be hyperlinked.
- Clicking the Insert > Hyperlink menu item (or use the
toolbar icon or Cntl + K).
- Click on the arrow to the right of the "Link To" field.
- Select the Remote Topic option.
- Select the CHM file that contains the topic to which the
hyperlink is linked to.
- Select the required topic.
You will be asked to copy the CHM into your project
directory. Hope this answers your question. If not, please do come
back.

SOAInvokerBean not binding to default composite when new version is coming

Hello,
we are using SOAServiceInvokerBean in order to invoke composite form Java application.
We are using SOA Suite 11.1.1.1.5 (PS4)
This is working but when we redeploy a new default version (2.0) of the original (1.0) called composite, invocation of the composite trought SOAServiceInvokerBean invoke the old composite (1.0) and not the new default version (2.0)
Is that the expected behavior ?
Getting a new instance of the SOAServiceInvokerBean from the context doesn't solve anything. We have to restart the soa_server in order for SOAServiceInvokerBean to bind to the new version (2.0).
Edited by: user2514892 on Aug 26, 2011 3:57 AM

Hello Clemens,
In fact we are using [SDO-Based Enterprise JavaBeans Client to Invoke Oracle SOA Suite|http://download.oracle.com/docs/cd/E21764_01/integration.1111/e10224/sca_sdo_ejb.htm#CCGFEIIC] as indicated in "Developer's Guide for Oracle SOA Suite".
As far as I know, there is no way to specify the version as API is
serviceFactory.createService("MyTestEJBService", HelloInterface.class);So even if rebinding to the default version was performed, there is no way to specify the version form the API. From my point of view this is a missing feature.
For a workaround, I start to explore a way using the oracle.soa.management.facade.Locator in order to search for Composite with default version property then query services of this composite and get the "versioned" service name and then use this name in the “createService” function.
But this method would require the service name to be unique so it would require to modify the composite to introduce an version pattern in the service name like
MyTestEJBServicev1.0
MyTestEJBServicev1.1
MyTestEJBServicev2.0
This is not very good as we are losing functionality to easily deploy a new version (with Jdev integration or through soa ant task) due to multiples modifications required in the composite.
Maybe you have a better way to invoke a composite using some easy way as SDO (in order to not manage the heavy "String" XML message and just stick to java objet) but allowing to specify the version.
We also think about exposing the composite thought a web service (but introducing small security issues as we have to secure this url from outside the server) then use a web-service wrapper (like JAX-WS) in java and invoke the composite like this.
Regards,
Guillaume

Opening with external editor always makes new version

i am a fine art figure photographer and portrait artist. almost every photo that i want to finish has to be round tripped to photoshop for retouching. in Aperture 1.5, i could select a photo, open in external editor (photoshop cs3), make my retouches and save the new version. if i wanted to re-visit the image and make further modifications, i could select the round-tripped photo, open with external editor, and the edited photo would be opened without creating a new version.
now in Aperture 2.0, once an image is edited and the new version saved, if i try to re-visit the image Aperture always creates a new version. this is a behavior that i don't want. new versions of photoshop edits are expensive when it comes to disk space. and with 30,000 images in my library, i just can't afford it!
in the preferences, i have the option "Create new versions when making adjustments" unchecked. that's the only option i can see that affects the automatic creation of new versions. any advice on how to edit the image without making a copy would be greatly appreciated!
thanks,
scott
Message was edited by: scott nichol

Hi,
I had the same problem as the OP and was surprised to read that Ian didn't encounter that same behavior. So I started testing several options. This is what I found;
When I open a previously-externally-edited picture from within Aperture, using the keyboard shortcut ⇧⌘ O, Aperture automatically creates a new version.
The same thing happens when I choose 'Edit with Adobe Photoshop CS3' from the Images menu in the menu bar.
On the other hand, when I open a previously-externally-edited picture from within Aperture by Ctrl clicking the picture and choosing 'Edit with Adobe Photoshop CS3' from the pop-up menu, the picture opens in Photoshop without Aperture creating a new version first.
Very strange because the pop-up menu command has the same keyboard shortcut as the commands I used in the first and second attempt.
Hope this helps.
Cheers,
Ivan

Play iTunes with iPhone Remote fails when new version of iTunes

Similar Messages

Maybe you are looking for