Play more swf-s from playlist

Hi,
I have installed the Adobe Flash Player version 9.0.124.0 on
my PC. It's work under IE, Opera and Firefox, but play only one swf
file which I selected. I want to play more swf files one after the
other automatically, like from playlist. What must I do to play
from playlist or from more selected files automatically (also
repeat the complete playlist when it's finished the playlist)? Or
whith which (free) player can I do it?
Thanks

Thanks...
This question has a simple answer. There is a feature of
Flash that you can export called a projector. A projector is a
standalone EXE that wraps the Flash Player and the SWF content
inside of it. You'll see the projector option in CS3's Publish
Settings.
So just create projectors and distribute that EXE.
I should note that projectors created with Flash CS3 will
contain the Flash Player 9 runtime (inside the EXE). You can also
create projectors by opening a SWF in the standalone player, then
choosing File> Create Projector.
You can get the standalone player for FP10 from
"Archived Flash Players available for testing purposes"
http://www.adobe.com/go/tn_14266
Regards,
Bentley Wolfe
Senior Support Engineer, Flash/Flash Player/Digital Editions
Adobe

Similar Messages

  • Bug in playing back video podcasts from playlists?

    I subscribe to about 2 dozen podcasts, a few of which are video podcasts. I have a smart playlist that collects all the podcasts together, based an their Album name. I have a second smart playlist that collects all unplayed & unrated members of the first podcast playlist.
    I have my Nano set to autosync the second smart playlist. If I navigate to this playlist (via main menu->Music->Playlists)I can see the video podcast titles listed there, see the little TV symbol next to them signifying they're video, but when I try playing them, I see a single frozen video frame, and the audio plays. Rotating the Nano to landscape mode doesn't make a difference. It happens on all my video podcasts.
    But when I play the video podcast via main menu->Podcast (enabled via Settings->General->Main Menu), it'll play normally.
    Has anyone else run into this bug? Anyone able to play video podcasts via the Music->Playlist?

    This is a serious bug. I was puzzled how to play the video podcasts which were put in a playlist using the same method as yours: 1st Smartlist collects all podcasts, and the second one collects the unplayed ones. Then I synch the second smart play list. No matter what I do, I cant see the video. However thanks to your post, I now know I can see it via the much more "normal" route of selecting podcasts from the main menu.

  • How do you play a swf file from the desktop

    I have created a swf file using flash. It can be downloaded
    onto the desktop. It is zipped. When unzipped it is called
    yadayada.swf. It does not get associated to the flash player or the
    shockwave flash player which are both installed. So if i double
    click on it it won't play.
    What do I have to do to make it play from the desktop in its
    plain swf file format. I want people to be able to download it onto
    their desktop for both Mac and PC users. I published it as a
    projector .exe file but mac users cant run it.
    What should be my next step?
    I have installed Flash on my development box so this isnt an
    issue but it is for my test computer that doesnt have flash
    installed.

    HI
    mm 2 things you can do.
    1. Create a html page that loads this SWF file, This will
    work on both OS's.
    2. Create a Projector file for PC and HQX for the Mac. You
    cannot have one
    file todo both.
    Hope this helps.
    Regards
    FlashJester Support Team
    e. - [email protected]
    w. - www.flashjester.com
    "This has been one of the most impressive and thoroughly
    pleasant
    experiences of customer support I have ever come across -
    astounding!"
    Director - hedgeapple

  • Music doesn't start when selected from playlist have to push pause then start. Always playing one track behind what is on screen

    Music doesn't start when selected from playlist have to push pause then start. Always playing one track behind what is on screen as my I-pad worksorks fine

    Same problem here, since upgrading to IOS-5.  Whenever I try to shuffle or play a genius mix (or even simply play an album) the iPod will skip the first one or two songs, play one song and then 'crash'.  I say 'crash' because it selects the next song and then nothing happens - the player isn't paused, and it appears to think it's playing, but the time bar doesn't change and no sounds come out.  Occasionally I've noticed the album artwork is wrong too.
    Rebooting does NOT work - I've tried it a number of times.
    Is this just an iPod problem??  If so, I would be surprised if Apple do anything quickly about it - they're more worried about iPhone problems I expect, and we (iPod users) are just the poor relations...  C'mon Apple - SORT IT OUT!!!!

  • I imported files from an external hard drive to Itunes on a new computer.  they imported & play fine, but the ratings & playlists are gone & i am unable to update any info.  I found a file name playlist on old drive & imported now most files are missing!

    I imported files from an external hard drive to Itunes on a new computer.  they imported & play fine, but the ratings & playlists are gone & i am unable to update any info.  I found a file name playlist on old drive & imported now most files are missing!  Help!

    Can you locate the iTunes Library.itl file on the old drive? Ideally you would have simply copied over the entire iTunes folder structure from <User's Music> on the old computer into <User's Music> on the new one to transfer the library will all playlists, ratings, play counts etc. intact.
    tt2

  • My apple tv continues to play the same song from a playlist that is on shuffle.

    My apple tv continues to play the same song from a playlist that is on shuffle. Is there a setting I need to adjust?

    I do not see anything there. I have a left arrow and song title on top with a list icon.  Nothing on the bottom but the direction arrows, pause button and volume.

  • Video won't play from playlist or album

    I have 2 music videos that play fine when started from video - put if I start either of them from playlist or album they come up and don't play.
    Appeciate any assistance.

    Thank you so much for getting back to me.
    I've looked through the code and couldn't find any path problems as I put everything in a single folder and ftped the whole folder up.  I'm missing something though.  It works well on my home machine Off a jump drive and off the hard drive.  When I go to load it up at school it doesn't play on my school machine or after I load it up on their server.  I had an idea that I wonder if my school machine has some type of blocker on it that's not letting it play off the jump drive (which works fine on my home machine).  I've loaded it up on the server and will check it tonight on my home machine to see If its some sort of school blocking thing.  Other than that I'm stumped.
    Here's the web page: http://faculty.gordon.edu/hu/bi/ted_hildebrandt/DASV/00_DASVIndex.htm
    Scroll down about one screen and you should see:
    Textual Visualization Commentary (Flash Videos; wmv=Windows)
                 Macs can play wmv's with the free download supplement to Quicktime at:                    
                    http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx
                 or a Media player at: http://www.microsoft.com/mac/products/flip4mac.mspx
          Proverbs 1 [Flash; wmv]  Proverbs 2 [Flash; wmv]
    Click on the ”Flash" link next to Proverbs 1 or Proverbs 2 to see what it is doing.
    Thanks for the help!
    Ted H.

  • Playing from playlist then switching to podcast, Pause button becomes Stop

    While I'm playing from my playlist and switching to podcast, the button that once was a PAUSE button switches to a STOP button. While still playing I switch back to playlist and doesn't change back to a PAUSE button, but stays a STOP button.
    Any ideas as to what's going on? I'm using iTunes version 7.0.2.16 on Windows XP.
    Thanks

    As Larry says:
    iPhoto Menu -> Provide iPhoto Feedback
    This forum is a space hosted by Apple but they don't post here. It's only users talking to other users.
    You're by no means the first person to note this and there is no solution.

  • A function to play offline / downloaded songs and playlists from Spotify on Sonos is missing!

    A function to play offline / downloaded songs and playlists from Spotify on Sonos is missing!
    Since my internet connection is a bit shaky at home I need to use my downloaded content and playlists with Spotify! 
    However this functionallity is not available together with Sonos which is a really big problem. 
    I hope you plan to work together with Sonos to introduce this functionallity really soon.
    Also this is already available with Google Play Music together with Sonos and it would really be a shame to leave Spotify just to solve this problem. 
     

    Would be great to have some way of getting offline play lists on Sonos for when my internet connection dies, and also to reduce the amount of data i download repetatitivly... i must have streamed the same songs hundreds and hundreds of times over the last few years playing spotify over sonos, massive waste of bandwidth and download capacity. Maybe we could point spotify to a network drive for spotify on sonos to use for storage of offline playlists.

  • Podcasts aren't playing from playlist

    I subscribe to a number of podcasts, and I add them all to a smart playlist called Podcasts, with parameters:
    All:
    Media Kind = Podcast
    Play Count = 0
    Live Updating on
    This playlist syncs correctly with my Nano, in that the episodes show up when I view the playlist (and also when I view the Podcasts section), but when I try to play one, nothing happens.
    I select an episode from the playlist, the play screen appears, but the time is 0:00 to -0:00 and nothing plays. It's just a gray screen with the music symbol on it. This occurs for any podcasts I play from the playlist, but music from playlists and podcasts from the Podcasts section both work fine.
    I'm using iTunes 9.0.2 and the lastest Nano 4g firmware.

    Podcast playbacks seem to be AFU since Nano 3G. Not sure if it's firmware or iTunes 9, but playlists that used to play in order don't. The first one will play and then some other podcast comes on in random order. It's seriously maddening!
    Wish I could help, but I haven't been able to get a smart playlist to work properly in the year I've owned my 4th gen. My 1st Gen worked fine but this is driving me nuts! And I haven't found any answers anywhere.

  • IPhone deletes 400 songs from playlist and syncs that to iTunes

    Hi there,
    I'm new on these forums, although I've been using iTunes (on a Windows PC) for many years.
    I got an iPhone 4s, set it up to use iCloud and iTunes Match.
    Now I chose to play a playlist (via Bluetooth) of about 500 songs randomly in the iphone. The phone downloaded the music via WLAN and played about 30 songs from that list. So far, so good.
    Next day I realized in iTunes that only these 30 songs remain on this particular list - and the other 450 or so were gone.
    I did change the list in iTunes prior to realizing this: I added an album, so it's these 30 songs + the new album.
    Since I haven't used an iPhone before, I'm a bit lost as to where the error lies. Have I done something wrong? Is iTunes Match not working correctly?
    Searching the web brought up many issues with iTunes Match, but nothing for this case.
    Of course, I can give more info, if you need it. So, is there anyone who has an explication for this? Thank you in advance!
    Best wishes,
    Volker

    On a Mac, use Option+Delete to:
    Delete the selected playlist and all the songs it contains from your library
    Delete the selected song from your library and all playlists
    You can find all the keyboard shortcuts in the iTunes Help menu > Keyboard shortcuts.

  • Play more than one song at a time

    The apple tv won't play more than one song on my playlist. And why can't there be playlists under "Music" and well as "Computer"?

    WLFehrs wrote:
    This has been a condition since day one.  The "working" icon just keeps going and it doesn't move on to the next song.  I've tried using the random play option as well to no avail.
    Is this when trying to stream content from iTunes using the Computers icons and Music submenu? I assume  the same happens when you try to play from the internet using the main Music icon too?  Is it only on Shuffle or when playing an album?
    What about movie rentals from itunes Store  - will they play ok?
    WLFehrs wrote:
    Connectivity isn't a problem, my home network has the latest tech and the Apple TV is within 15 feet anyway. 
    While that seems logical don't entirely discount it - issues like this are incredibly frustrating to pin down to which component on the network is causing the problem  - your old AppleTV worked (with Windows 8?) so this makes the newer model the more likely culprit I would agree.
    Whenever there are issues like this, if you have not done so:
    1 - Unpower AppleTV, router and restart along with the computer.
    2 - If connecting via wifi and it is feasible to test with ethernet do so to exclude wifi as the problem somewhere in the chain.
    3 - If streaming from iTunes check the computer is not going to sleep - power saving with hard drives spinning down could potentially cause a 'timeout' issue for access and worth temporarily disabling to test.
    4 - Temporarily disable any security software (firewall/port blocking) on the computer or check if it is detecting AppleTV repeated connections as an unknown intrusion threat.
    5 - Reset AppleTV and set it up again from the Settings menu.
    6 - Restore AppleTV using iTunes and a microUSB to USB connection:
    Apple TV (2nd and 3rd generation): Restoring your Apple TV
    7 - Assuming under warranty, take it to an Apple store and see if you can get a replacement.  It may be faulty.
    As I said these issues can be very tricky to pin down and it can be a process of elimination.
    I had issues last year with connection problems - I thought it was an itunes update as there were threads elsewhere about multiple connections being established.  One day I restarted my router and the problem was fixed.  A few years ago my AppleTV1s were hanging after extended use - it was the Netgear router overheating ( aknown fault with that particular model).
    AC

  • I applied a template to a page with SWFs and now that page does not play the SWFs. Why?

    I applied a template to a page with SWFs and now that page does not play the SWFs (just a blank area where the SWF should be). When I detach the template it will play the flash file. This site will eventually be updated via Adobe Contribute. And I just discovered that when applying a template to a page that uses HTML datasets (Master/Detail),it no longer reads the Master/detail regions and displays a blank. Any thoughts?
    [Moved to Dreamweaver forum by moderator]

    Firstly, you shouldn't really 'apply' a template to a page, you should create a child page by going to FILE>NEW>Page from Template.  Too many things can happen when applying a template the way you are doing it. eg:; editable and non-editable regions not matching up and being asked where to place these regions and in all likelihood, you end up with 2 or more of the same region.
    When a swf file is inserted into a page, a corresponding Scripts folder is written automatically is stored in the root of the site - it is also linked to in the head of the document. What I believe is happening is that when you apply a template to the page, the Template has no idea that there is a swf file on the page and is not aware of the correct link to the Scripts folder.  If you do a test and add the swf file to the template page itself, I bet that the links to the swf and the scripts folder are correct - because DW knows the correct path to the script file.   Hence the reason the page probably works when you detach it from a template.

  • Play multiple .SWF in sequence

    I have two swf files that I would like to play in sequence in a main  flash file.  The two swf files are partA.swf and partB.swf. I set up two  frames using this actionscript 3 snippet:
    Frame 1:
    Code:
    var partARequest:URLRequest = new URLRequest("partA.swf");
    var partALoader:Loader = new Loader();
    partALoader.load(partARequest);
    addChild(partALoader);
    Frame 2:
    Code:
    var partBRequest:URLRequest = new URLRequest("partB.swf");
    var partBLoader:Loader = new Loader();
    partBLoader.load(partBRequest);
    addChild(partBLoader);
    I made sure to set new loaders that  correspond to it's proper swf file. So partA.swf goes with partALoader  and partB.swf goes with partBLoader.
    I noticed that individually they work great. If I just set up frame 1 or  frame 2 by themselves, the swf file plays. When placed together,  however, either frame 1 plays without going to frame 2 OR frame 2 plays  by default without playing frame 1 first.
    How can I get this to work properly in sequence?
    Just to break things down, this is how I would like the set up.
    1. Play frame 1 which plays partA.swf,
    2. Stop when finished and go to frame 2 which plays partB.swf
    3. Stop movie, no need to loop.
    4. Would like to have option for adding more swf files
    I don't use flash much, so guidance with code is much appreciated. I  would think this is a simple task, but searching for a proper solution  hasn't been successful.
    Also just to clarify from previous searches and posts I looked at: I am  not using buttons, and this is using actionscript 3.0 not 2.0, and this  is using only .swf files.
    Thanks a bunch

    Here's a nice trick that Andrei1 taught me  a week ago or so that should sort out your problem:
    On the last frame of partA.swf, you could dispatch an event, like so:
    dispatchEvent(new Event("advanceParentTimeline"));
    Then, in your parent movie on the frame that partA gets loaded, you can listen for the text, like so:
    stage.addEventListener("advanceParentTimeline", onTextRequest, true);
    Add the following function to the same frame with the listener mentioned above, and if your parent movie hears that text, send your movie to frame 2, like so:
    function onTextRequest(e:Event):void {
         gotoAndStop(2);
    Hope that helps,
    ~Chipleh

  • My iPod touch is not playing the songs on the playlists in the correct order. Can anyone help?

    My ipod touch is not playing the songs on the playlist in the correct order.

    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store         

Maybe you are looking for

  • HP Officejet Pro 8500 A909g

    When I shut down my computer and then turn it on again, the above device does not connect.  The only way I can get it to connect is to unplug it and then plug it back in again.  It worked fine for about 6 months after I bought it, but now it is havin

  • Workflow trigger on posting date change

    Dear All, The workflow which I have implemented works as the document goes for the approval at different levels prior to posting.If in any case some problem occurs prior to posting like this time posting period is not closed then the document will go

  • Bbciplayer won't install

    Hi Just bought my first Apple product Mac Book Pro was assured in the shop that BBCiplayer would not be a problem to use and I have not been able to install it all.  I am in two minds whether to take the laptop back as this is something I use my Lapt

  • Enqueue/Dequeue is repeating the last queued element

    Hello I am trying to aquire data from a camera at 256fps in one for loop, enqueueing the data after each frame is acquired. A seperate while loop is supposed to dequeue each image and stream it to a binary file, acheiving the maximum imaging speed po

  • Patch application paused for patch

    Hi All, The patch application paused while applying the 11.5.10 CU2 FAILED: file LoadDTDToClob.class on worker 1. FAILED: file LoadXSLTToClob.class on worker 2. FAILED: file LoadDTDToClob.class on worker 3. FAILED: file LoadDTDToClob.class on worker