Play music in  two airport express

I have two airport express. Old and new models. Old one connected to extend the wireless network of the new one.
How do I make Audio play back from iTunes in both the airport express at the same time from my iMac?
My iMac runs mountain lion.
Thanks
Badrakumar

I did that step
This what I see
I do not see Airport express in the Multiple speakers window.
Why is it? How to solve it?
Please help
Thanks

Similar Messages

  • Using iTunes to play music on two Airport Expresses simultaneously

    Hi everyone,
    I'm trying to set up a system where iTunes 7.0 on my Windows 2000 PC can play simultaneously to two Airport Expresses.
    I've set up the first AE (call it AE1) by connecting it to my LAN with an Ethernet cable; it appears in the Base Station Chooser and I can find it and set it up. I set it up to 'Create a wireless network' and check both boxes in the iTunes tab, and give it an iTunes speaker name. At this point, everything's happy: I can see AE1 in iTunes, and play music to the speakers, and my Nintendo Wii can even get to the internet using AE1. I've left AE1 plugged in to the network.
    Now the problem: I bought another Airport Express, call it AE2, and I want the new one to hook up to the existing network and let me play iTunes through the new one, as well. I connected AE2 to my LAN with ethernet and it showed up in the Base Station Chooser; I set it up to 'Join an Existing Wireless Network' and gave it the exact same Network Name: "Mike Home Network". I checked both checkboxes in the iTunes tab and gave the speakers a name. I then unhooked the ethernet, plugged in the speakers to AE2, and unplugged and replugged AE2 to restart it. The light flashes green, goes to yellow for a while, then goes solid green. (So I assume it found a network to hook up to.) iTunes shows the Multiple Speakers button, and I can pick AE1, but no sign of AE2.
    I restart iTunes, but it still can't find AE2. Some support suggests using the wizard, but I'm on 2000 so it's not supported.
    So my questions:
    * Can I verify somehow that AE2 hooked up to the network that AE1 created? Ping it or telnet to it or something? (I can ping AE1 just fine.)
    * Is 'Join an Existing Network' the right way to do this?
    (I also tried WDS with no success, but I may have done it wrong.)
    * AE1 is distributing IP addresses; AE2 is not. Is this correct?
    Access Control is turned off on both AE's.
    I have Wireless Security set to 'Off' on both.
    (I'll re-enable it once I get these two going.)
    They're about 20 feet apart.
    Wireless channel is 'Automatic' on both. (Also tried it with both on channel 8)
    Firmware on both AE's is 6.3
    Itunes is version 7
    Any suggestions? Anything at all, I'm absolutely stumped and this seems like it should be really straightforward....
      Windows 2000  

    Figured it out! thanks everyone for the help.
    In the end, I fixed it by turning off 'Distribute IP Addresses' on AE1.
    The problem was, if you want iTunes to find the wireless Airport Express, iTunes must be able to see the wireless AE's IP address. When AE1 was distributing IP addresses, it was performing NAT, which meant that iTunes on my PC could not distinguish between AE1 and AE2 behind it.
    This is not clear in any of the documentation; I can't be the first person to be confused by this.

  • Installed latest version of iTunes, now I cannot play music through my Airport express. I'm seeing the message "An error occurred while connecting to the AirPlay device "living room". The network connection failed.

    Installed latest version of iTunes, now I cannot play music through my Airport Express. I'm seeing the message "An error occurred while connecting to the AirPlay device "living room". The network connection failed..."Living room" is what I named the is what I named The AirPlay function of the Aport Express. Thanks!

    I have the same problem - did you solve it?

  • I use itunes to play music through my airport express but sometimes the songs cut out sporatically.  a song will be playing along then all of a sudden there is intermittant music and silence. What could be causing this?

    i use itunes to play music through my airport express but sometimes the songs cut out sporatically.  a song will be playing along then all of a sudden there is intermittant music and silence. What could be causing this?

    I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
    After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

  • IPAD/IPOD playing music to a Airport Express - No Sound?

    I have an IPAD and an IPOD.  IPAD is 4th gen, IOS7.  IPOD is 4th gen, IOS6.
    Airport express is the new one second generation.  Airport Express is wired to my home network, and its in bridged mode with wireless off.  Its purpose is only to play music via airplay.
    When I turn on airplay on my IPAD or IPOD I can always see my Airport Express.  It always allows me to select it as my output speaker.  However, only sometimes does music actually play through my Airport Express / Stereo setup.  The IPAD or IPOD always shows the music playing in its music playing app.  It appears as if its working.  I just cant always hear it.
    If Im trying to play music but no sound is coming out of my stereo, I can power off my IPAD or IPOD, then try playing music again and it will work.  This is a work-around to my problem that really bugs me.  I want to properly diagnose this problem so that I do not have to power cycle my iDevice before using airplay.
    Ive read many posts about Airport Express sound problems.  Most problems seem to be either short audio drop-outs, or not detecting the Airport Express.  I think my problem is different.
    I have read some people had success downgrading their Airport Express firmware to 7.6.1 to fix the short audio drop-outs.  I have not tried this as my problem is not worth audio drop-outs.  Its with no sound at all playing.
    I am begginging to think the Airport Express isnt as rock-solid for airplay as I thought.
    QUESTIONS:
    Are there any tools available for troubleshooting this type of problem?  The knowledge base articles Ive read from Apple have been no help.

    Unless your iMac was made before 2006 (this forum is for old iMacs), you might get better assistance by posting in one of the following forum areas:
    AirPort
    Using iPad
    iMac (Intel)

  • Lost the ability to stream music to two Airport Express simultaneously

    Hello
    For an unknown reason I'm now getting an error message (unknown error -3256) when trying to stream music to two AExpress's and iTunes will only play through one AExpress. This is a very recent problem as I could stream to both AE in the past. Both iTunes and OS are the latest versions.
    Setup is an iMac, two AE and a remote hard drive with the iTunes Library attached to an Airport Extreme. Only recent change is the install of 2 x 1gB RAM sticks. I'm stumped. Any thoughts would be greatly appreciated.
    TIA
    Warren

    Hello All
    Found the solution in another thread. It was the firewall settings.......had it set to "allow only essential services" set it to "allow all incoming connections" and all is well
    Cheers

  • How to set up a Time Capsule to extend a non-Apple router and play tunes to an Airport Express?

    I have an older Time capsule that I would like to give my sister in order to extend her CenturyLink wifi.  I can connect via ethernet but she would like to play music thru an Airport Express at the stereo system.
    My question is:  would it be better to extend the existing wi-fi network (to the upstairs part of the house) OR set up a new Apple network with the Time Capsule linked to the Airport Express.  This is the way I currently have my own network....in a smaller house.

    I have an older Time capsule that I would like to give my sister in order to extend her CenturyLink wifi
    The Time Capsule is not compatible with a CenturyLink device if you plan to "extend" using wireless only.
    You will need to connect the Time Capsule to the CenturyLink modem/router using an Ethernet cable. Then, configure the Time Capsule to "create a wireless network".
    The AirPort Express could then be used for AirTunes by receiving the signal from the Time Capsule.
    If the AIrPort Express is a newer 802.11n version, then it could also be configured to "extend" the wireless signal of the Time Capsule to provide more wireless coverage, in addition to use for AirTunes.
    If you plan to keep the wireless on for the CenturyLink gateway, make sure that the Time Capsule is separated by at least 6-7 feet to help minimize the chances of wireless interference between two routers.

  • Two Airport Express no longer playing AirPlay?

    Hi all,
    I've had two Airport Express devices for about 3 years now, they all work fine as access points, have been kept up to date with firmware etc. but since a couple of months ago or so (I don't exactly know when, I've been away for some time) any attempt at playing from iTunes on my 2010 macbook pro fail with "connection timed out" problems. The airport express can be seen and managed just fine in the configuration utility. I even tried using a second airport express with the same result.
    Nothing has changed in my network or computer hardware, the only changes have been updates to mountain lion (after which it still worked I should add) and the usual itunes updates.
    Is this Apple scheming me into buying new hardware?
    Cheers
    - Balt

    some times the electricity blinks in the house... have you tried restarting both units... just unplug it for ten seconds then plug back in.

  • How to hook up TWO Airport Expresses and base to reduce AirTunes dropouts?

    Any suggestions on the best way to set up Airport Extreme base station with two Airport Expresses to allow iTunes to drive two separate stereos?
    I've had a lot of problems with random Airtunes dropouts with this system, even now that I have removed all security from the network (removal of which definitely helps AirTunes). And I can consistently play music through ONE of the stereos without dropouts. But whenever I try to use the Multiple Speakers option in iTunes, the dropouts start again.
    I've changed my channel to one that none of my neighbors is using. I've tried moving all of the Airports away from other electronics. Right now the two Expresses are clients of the network created on the Extreme base, which is where the cable modem is connected. Is there some better way to do it? Like use the Expresses as relays instead of clients, or something?

    While I don't have any suggestions to make beyond what you have already tried, I can tell you that configuring the Airport Express units as relay or remote base stations will likely make the problem worse because of the bandwidth penalty you get from such a setup.
    In case you haven't yet seen it, this is what Apple has to say on the topic:
    http://docs.info.apple.com/article.html?artnum=108065

  • Can Two Airport Express be connected to an Airport Extreme?

    I have two Airport Express units and one Airport Extreme.  One of the Airport Exp's is working to extend the Wi-Fi network for 8702.11b-g and I'd like to use the other to connect a Samsung Blue Ray via the ethernet port.  Can the Extreme support two Express units in a mixed mode like I'm describing?  The second isn't being recognized by the Airport Utility.
    Below is my Mac environment.
    (2) MacBook Pro's one with OSX10.7 and the other 10.6
    (2) iPhone 4gs
    (1) iPad 2
    (2) Airport Express 1st gen (extending the wireless network) and 2nd gen I what to connect to the Samsung
    (1) Airport Exteme Base station
    Thanks for your help in advance.

    As in other similr threads re the airport utility 5.6 is only one that can see all variants of airports as old as Graphite/Snow while 6.0 makes nice pics it won't see them to you get the WDS Remote airport ids set up in your main base router and vice versa-your main extreme base should be set up to run in 802.11b/g/n mode or g/n if oldest is 802.11g...other than that the only pain is airport express dongle routers are buggy, need firmware to be at least 6.0 inside them, not the airport util, and you are better off setting up manually as the tools do not set up WDS correctly without starting from scratch rebooting and resetting most all the routers- which if you just cant get going you might try...be sure you put primary extreme base main as the main router as "participating in WDS network" then the other 2 can simply be manually configured with same net name base main has and passwords and also you must install the airport ids (Mac address of the wifi ports which is usually 1 less than the airport ehternet mac address)... once you put in the exxpresses or older routers as extend a WDS NETWORK as a Remote (not a relay) you can definitely do what you state---you can hang your device off one of them via ethernet or USB and or wifi client and attach others as wiffi clients-unless you explcitly state which Macnooks will connect via access control  ;osts of upi enab;e access cpmytp;(but then you need to add every devices MAC address in to whichever touter you want them to be able to be a client of-a pain but makes the most secure and traffic shaped network if you are limited on your wan port speed--i have 25/25 FIOS and get all of it direct eithernet to the main express and almost all near the exrress main within like 50 feet but I have to extend my net about 120 tp 150 foot radius around the main extreme 802.11n bae so I do exactly what you ask if you can do--with an express and an old Snow--and works pretty well surprisingly except the Snow goes belly up every couple days needs a power cylce--i am cheap so i will do it til it dies...you can  just roam as I do with your laptops about your home then and link up to the nearest remote WDS airport or wind up on the extreme if you wander into the hub area...
    --Not recommending this but if if you are very compulsive and usually use similar iPads or books in same rooms always and dont move them around much from the rooms they get used in (or if you just dont have enough coverage and are Wan limited on speed)  you can specify each laptops Mac address so only those will bind to the wifi ports on say the older or slowest router-keep in mind that each remote adds a hope and so essentially cuts speed to 50 percent but I still get 16 mb/sec with a SNOW extending my 802.11n Edtreme base as a remote and I can get about 20 mb/sec on the other remote router express dongle (hate the things-had 2 break on me forever)....but like the airtuunes feature even though usually I use Apple TV to play music on steeo as its the old one with memory--great deal at 499 now 99-doh! good luck hope i made sense..

  • Two airport express not seen by iPhone

    I have two airport express units in my house. They partecipate in my home wifi network. From my iMac (10.7.4)  I see them without problems both from the airport utility (6.1) which shows them having version 7.6.1 firmware. From the iMac they also appear as speakers in iTunes.
    Problem is that from my iPhone 4S running IOS 5.1.1 neither the airport utility, nor Music, show those aiirport express units (the iPhone for all others uses is correctly connected to the home network).
    Same happens from my wife's iPhone 4 running 5.1.1
    What can I try ?
    PS With previous software levels things used to work flawlessly. Now even the playback from the iMac's iTunes from times to times drops the connection. This is fixed by closing iTunes and restrting it.

    Problem solved. It was my wireless router setup which had an option to prevent wireless devices connecting to exchange data between themselves. Deselecting this option made the iphone see the airports after I inactivated IPv6 networking.

  • Can I link up one time capsule with two airport express, Can I link up one time capsule with two airport express

    Hi, I would like to know whether I can link up one time capsule with two airport express. The result why is that I would like to put one time capsule at first floor, two airport express at 2nd floor and 3rd floor. All these three share one network. Please advise. Thanks.

    There are several ways to conenct them. We need to know what it is you want to accomplish first. Do you want better Wi-Fi coverage on the second and third floors or do you want to stream music to the xpresses?

  • Two Airport Expresses

    I am currently using an Airport Express to send music from iTunes to a receiver in another part of the house. I would like to add another Airport Express to send music to a second receiver in another part of the house. Will this work? If it will work will the music from both Airport Expresses be in sync if both are playing at the same time? Thanks for the help.

    Yes, you can configure multiple AirPort Express Base Stations (AX) to stream simultaneously to multiple destinations. Overall this syncing works fairly well. Some things that may prevent it from doing so would typically be Wi-Fi interference, building material, etc. that would prevent a particular AX from getting a good quality signal.

  • How can I set up a wi-fi network, using one time capsule and two airport express

    how can I set up a wi-fi network, using one time capsule and two airport express ?
    The time capsule is near the Mac. ok
    The first Airport is on the corridor, ok, works well and the App on the iPad signals so, ok
    But when I plug the next Airport on another room nearby nothing happens, and signals disconected ....
    is the signal so weak that is not able to go to ono room to the other ?

    Well, even if you have the first express set up to extend the network, the second express can only extend from the TimeCapsule.
    Maybe you got walls of sheetrook in the way, or kitchen/bathroom tiles, etc, dampening the signal rapidly.

  • My itunes on my imac cannot stream my music by my airport express. It says unknown error (-15006). My ipad it is no problem.

    My itunes on my imac cannot stream my music by my airport express. It says unknown error (-15006). With my ipad it is no problem.
    My imac has been working before.

    Hello JBrans!
    Did you get help for this problem. Today I got the same problem. Now I don´t know what I can do anything. I did reset AirPort Express. New konfiguration. Nothing. Thank for help!
    Kind regards
    Falk H.

Maybe you are looking for

  • I can send but not receive email using Mail and Comcast

    My incoming mail [Mac Mail 3.6(936) ] slowed and now has stopped. I get error message "mail.comcast.net" on port 995 timed out. I can send. I can receive at Comcast.net. I have tried changing the port setting to 101 and no SSL and 587 (the comcast on

  • External monitor issues with new OS

    Since switching to the new OS Lion I can't get my external monitor to work through my Toshiba docking station.  It used to work??

  • Examples, exercises & solutions

    Hi, I'm getting started with Visual Composer and have already been through some exercises (Exercise1_CreatingBankInformationiView Basis Mode, Exercise2_EnhancingBankInformationiView, Exercise3_Creating a Guided procedure forBankInformation, Exercise4

  • This may seem obvious, but how can you add, subtract multiply divide in forms central.

    I do not see any way of performing basic math in Adobe Forms Central. Even i Adobe Acrobat form designer there seems to be a way, but you cannot select the fields needed in the calculation?

  • 10.3.2.2168 update - alarms are not working

    Hi, I updated to 10.2.3.2168 yesterday, everything looked good, but this morning my alarms didn't go off even though they were set. My phone has the correct time. Another odd thing is my emails have weird times on them, for example, I have one for to