Play only selection

How can I get SB to play only the selection I have highlighted? If I highlight something and click the space bar to play, it plays from that spot, but keeps going.

Edit>Copy (copy the selection)
File>New> Audio File From Selection or Audio File From Clipboard (either or).
This will create a new track with only the selected audio.
Then you will only play the selection.
As far as doing it from within the complete file, I haven't found a way other than "looping" it but then it keeps on playing over and over. That probably isn't what you were looking for.

Similar Messages

Create a DVD menu to play only selected scenes?

Hi,
I'm using Premiere Elements 11. Is it possible to create a DVD menu for automatic play of selected scenes? As an example, my movie may have 12 scenes. However, I would like to give the user the capability to play scenes 2, 4, 6, & 12, without interruption (or the need to go back to the menu).
Thanks,
Dean

ATR,
I also think that your workaround can work for this instance, unless I mis-read the requirements.
As for Encore, as of EncoreDVD 2.0 (CS 2 Production Studio in my case), Encore CS 5, CS 5.5 and CS 6 (the end of the line for Encore), it can do that easily.
Now, I am only guessing with Sony's DVD Architect, but would hope that it can do the same. Maybe Steve Grisetti can comment, since he "wrote the book" on that program.
As we all know, PrE has many authoring limitations. First, they are semi-automatic, and very linear. That said, for most users, it works just fine. However, there are many, fairly common navigation schemes, that just do not directly figure into what it can do.
The downside to a full-featured authoring program, is that that "semi-automatic" work will not be done - one must do things by hand, but with that extra work, comes vast power. To me, that is a small trade-off. I will go for "power" any day. Of course, as I normally use Encore, I am used to doing much by hand, so it's just part of my authoring scheme.
I wish that I knew Sony's DVD Architect better, but I have used Encore for so long, that I have never found a need to even look at it. All that I know has come from here, or Muvipix, where it always gets great recs. Since Encore is no longer part of Adobe, I have the choice to either stick with my versions, or look to another authoring program. Over the years, I have used Encore, Sonic Scenarist (never owned it myself, but authored on other's systems, since it cost about US $50K), and DVD Studio (good, but with a clunky interface). Encore was my go-to app., but then, it will be no more.
Hunt

Can't I play only selected lists?

I'm new to the shuffle; have been using another brand's mp3 player for years. In that one, I can upload songs as "albums" (playlists) and play only that selected album, setting it to repeat from the beginning of that album when it's done rather than go to the next.
I've uploaded two playlists to my new shuffle: one for when I'm running, and one for when I'm drifting off to sleep. Obviously, they are VERY different and when I'm running, I want it to use only the songs from that playlist, and when I'm going to sleep, I don't want the hard rock, but instead the peaceful newage-y music.
Can't I do this with the ipod? Although I uploaded the playlists, iTunes loaded just the songs, so even setting it to play in order, it will play all the songs eventually (imagine the shock of drifting off to sleep peacefully and Bob Segar comes blasting through .
Thanks for any suggestions.

It was a creative idea, but actually, it won't work for my weird purposes in this. While the running music doesn't have to be in any order, the sleepy stuff does, since it starts with a spoken thing, and then proceeds through two music selections. Can't have the spoken thing anything but first.
So setting the sleep stuff to shuffle is not good. At first, I thought ok, I'll just do it in reverse---set the sleep stuff to not play when shuffling and let the running stuff shuffle. But then it hit me that in that case, once the nice sleep music finished, the shuffle would play the hard rock I've got for the running music! Ugh.
I might try combining the spoken mp3 and the two music mp3s into one humongous mp3 with an audio editor; then using your technique of marking the rock "don't play when shuffling" and setting the sleep to play on shuffle will be okay, since it will just be one file.
What a PITA . I still think your workaround was very creative and potentially useful if I didn't have to have the sleep stuff in a particular order. And I do understand your comment about the "shuffle"---just guess I don't see any purpose to a player that you can't choose to play a single playlist from. The thing IS cute though .
Thanks for your help, and for any further suggestions!

Easy Question! How Do I Play ONLY the Selection, and then playback stops?

How Do I Play ONLY the Selection, and then playback stops? (Same as subject..)
Thanks! I'm loving STP so far. I came from Sony Sound Forge so it's been difficult finding something that can compare, but I think I have it now! Lot's of advantages for STP too.

I think you're confusing the audio loops with MIDI loops. The blue loops are audio loops which will play only on audio tracks. You can't 'play' those with a keyboard because they are actual audio files. The green loops contain MIDI data that corresponds with a software instrument, and if you drop them onto a Software Instrument track, they will open that instrument which you CAN play with an external keyboard or the caps lock keyboard.
I might be missing some loops, but when I searched for Bell Tower I found only one, and it is a blue loop. So it can only be played as an audio loop on an audio track. However, if it were a green loop, you would NOT drop it on an external MIDI track (I think that's what you're trying to do if you're dragging it onto the 'Grand Piano MIDI instrument'), but you would create a SOFTWARE INSTRUMENT track, and drag it on that. Any internal sounds you want to play from Logic's instrument you'll do from Software Instrument tracks, and not MIDI tracks.
What you should do to find a good chime sound that you can play with the caps lock keyboard is to create a Software Instrument Track, open the Library tab, and search there for a good chime. This will search all of the instruments and presets that Logic has for all of its internal instruments. Try 'Tubular Bells' and see if that works for you.
If you need to use the bells from that loop, do what SC suggested, and take the hits from the audio file and load them into a sampler. Then you can play them the way you want to. If you don't know how to make a sampler, it's a bit complicated. Look up EXS24 in the manual, or check out
http://www.youtube.com/user/SFLogicNinja
I think he has a video or two on EXS24

IPhone plays only one song at a time

After 2 weeks of the iPod feature of my iPhone working just perfectly, last night I discovered it will no longer go through a play list. No matter what I do, it plays only one song, repeatedly - either a song I choose or a song selected randomly by hitting Shuffle. Shuffle only chooses the first song randomly, after which that song plays over and over unless I manually choose another. I deleted my playlists this morning, rebooted iTunes, re-synced my playlists to the iPhone, same problem. Other than having to go through an entire Restore, are there any other options? This actually occurred out of the blue, NOT after a re-sync with the computer, therefore NOT caused by the iTunes update to 7.3.1.
iMac G5 Mac OS X (10.4.10)

THANK YOU!!! I never would have found that myself because I don't even look at albums let alone play whole albums. My playlists are favorite songs from here and there and rarely more than one or two from any particular album. I don't know how that got changed since I have never looked at an album before, didn't know there were time and shuffle markers. I must have gone bump in the dark... so thank you again!

2nd onwards play plays only last frame of MC within MC

Flash CS5
Hi,
I have an animation where a car travels across the scene then its car door opens at the end of the sequence. Other vehicles also move.
The car is a MovieClip, (car MC) in that MC’s timeline are layers for indicator lights and brake lights as it progresses across the scene, indicating right then brakes and indicates left and stops at kerbside then a keyframe at the last frame on another layer still within Car MC is for OpenLeftDoor MC where the door opens, the car interior is then visible.
THE PROBLEM:-
The second and subsequent times Reset then Play is selected, other vehicles run ok, the car progresses across the scene so it is playing the Car MC, BUT the door is already fully open throughout the journey and the car is indicating left, so its playing the very last frame of the OpenLeftDoor MC within the Car_MC. Even the right turn indicator lights and brake lights don’t show, it plays the left turn indicators all the way through. These are the last layer to play before the OpenLeftDoor MC and occupy the same last frame. Its not displaying the layers with left indic and brakes. The indicator lights are also MC’s.
Why ?
If I delete the layer with the door MC, it still sees car travel along with only the last MC playing, the Indicate left one.
I have two buttons, in properties they are gotoPlayBtn and gotoStopBtn
gotoStopBtn resets the scene and the gotoPlayBtn plays the scene from fr2.
I say frame 2 as frame 1 has a stop command required for the code below so I have moved everything forward to fr2. Necessary for any MovieClips that start at Frame 1. Not Vital for background art etc.
The code is :-
// button navigation on timeline
gotoPlayBtn.addEventListener(MouseEvent.CLICK, onGotoPlayClick, false, 0, true);
gotoStopBtn.addEventListener(MouseEvent.CLICK, onGotoStopClick, false, 0, true);
function onGotoPlayClick(evt:MouseEvent):void {
gotoAndPlay("start");
function onGotoStopClick(evt:MouseEvent):void {
gotoAndStop("start");
If I go test movie it runs ok, 2nd play then the problem. Close the test window and run test movie again and 1st play is ok.
I have been given advice as an alternative to the stop command in frame 1 to try gotoAndStop(1) though in this code above I am not sure where to put this. I presume I delete the stop command from fr1 and return all animations to fr1.
Is it the code at fault ? Whats the fix ?
Envirographics

Thanks for your response.
Forgive me, please, but what is ide?
I guess I should retrace steps a bit.
I created an fla of my primary clip. It's actually 1428 frames.
The last frame has the action: gotoAndPlay("loop start"); (I forgot I'd changed the frame number to a label)
Frame 290 on this fla timeline has the frame label: loop start
It works as expected when exported as .swf.
When I put the primary movie .swf inside of the preloader movie clip's .fla on the third frame of the content layer, and export that .fla as an .swf, that's when I notice the actionscript of the primary movie clip is gone.
Am I right in believing you can nest .swfs and keep actions?
Thank you again for your assistance.

Playing not selected music in iTunes 9

Hi all!
I imported complete albums in iTunes. Because I do not want to hear the complete album on the go I selected/acitvated some title. The sync parameters for the iPhone are set to "only selected/activated titles".
At home I'd like to hear the complete album. But iTunes plays only the selected/activated, too. I can't "override" this by selecting (blue selection of all titles).
=> What can I do to hear the complete album without activating all titles of the album?
PB

iTunes will only play an unchecked file if the track is double-clicked; it will not automatically advance to an unchecked file.
Look into using playlists, rather than checkmarks, to manage what you sync to your iPod. This will give you much more freedom in arranging your music as you wish. On the iPod options page, choose "sync selected playlists."

How to play all selections?

iLive 05 Suite
We have a school project that has 18 small iMovie segments. I have figured out how to use mapping, folders and subfolders so I can group and arrange these student masterpieces using iDVD.
The final piece of the puzzle is: Is there any way I can configure iDVD so the resulting DVD will have an option to play through all the 18 mini movies or can the user only select one at a time to view?
Remember, these are 18 individual iMovies that I am bringing into iDVD and NOT one iMovie with 18 chapter markers.
Thanks for any help,
Sue

Hi Suzanne
No iDVD can't do that easily but if by any chance the 18 movies together is
less than 60 min then You can import them into a new iMovie project and
make one 18 chapter movie as You say and add this to the 18 individual ones
that you already have.
To make a DVD with a play all movie and chapters that ends in the iDVD
start menu You have to do a double set. I think that this is possible in
DVD-Studio pro.
Yours Bengt W

I bought a full album of 4 songs on Itunes sotre, when I play only hear 30 seconds ... why?

I bought a full album of 4 songs on Itunes sotre, when I play only hear 30 seconds ... why?
I can do, how I can get my money? or how I can re-download them without buying them?

Why? Seems to be an intermittent issue at present.
Assuming you are in a region where you are allowed to redownload your past purchases, delete the current copies from your iTunes library, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
tt2

Cisco Mediasense API user to view only selected recordings/extensions

Dear Experts,
Is it possible with Cisco MediaSense 10.5 to limit users to view only selected Phones/extensions recordings ?
For eg: A department manager must only view their department members. They must only be able to listen to the recordings from their department members. Is this possible ?
If yes, what is the configuration required ?
Regards
Bejoy Thomas

Hi Bejoy,
It is not possible in MediaSense natively to do this right now. You can get a Partner Add-on to enforce the demarkations. Both Calabrio and NICE offer a Search and Play add-on that can do this.
HTH
Manish

Why is Random/Shuffle playing only a limited subset of songs?

For no reason that I can discern, the Random function is playing only from a small number of songs -- mainly ones I added today and yesterday. I noticed this because I have a custom "Shuffle" playlist that I've used for years and today I dumped about 125 new songs into my music library. All I was hearing was the new songs. When I quit the playlist and went directly to my library, with Random still selected, no matter what song I started with the queue would still contain only the new songs.
When I turn the random function off everything plays in the order it should.
I have a huge library -- over 25,000 files. Have I hit the limit that Random can deal with? (Just kidding, I don't really think that's it.)
I've tried trashing com.apple.iTunes.plist in Preferences and restarting the computer, which made no difference. I've turned off the Remote app on my iPad, which I often use to control playback. Beyond that I'm stymied.
Cary

As a follow-up, I tried reinstalling iTunes. No change. Then I tried editing my playlist so that it didn't include any songs added after last month, which resulted in it coming to a grinding halt after playing whatever song I selected.
Now, in fact, when I try to play anything from a playlist I can only play one song. Clicking on the "Up Next" queue brings up the message "No upcoming songs."
Curiouser ...

Can I set the ipod to shuffle play only a playlist?

I have an iPod classic. Can I set it to shuffle play only a selected playlist? It looks as though I can only shuffle all the songs on the iPod.

Usually, in addition to the "Shuffle All" function on the main menu, there's a shuffle play mode that can be toggled during playback.
Start playing your desired playlist, then press the center button and see if there's an option to toggle shuffle mode on.

Wont play unchecked selections?

I'm having a problem.
I have a 1st generation iPod nano which is 1 gig, and hardly anything fits in it so i decided to make sure it only synced checked selections. When i put iTunes on shuffle, it played the unchecked songs, but ever since i updated it, it will only play checked selections.
Is there anyway i can make iTunes play both unchecked and checked selections while my iPod only syncs checked selections?
Any help would be much appreciated.

To answer your question, no you can not have unchecked songs play automatically in iTunes.
Instead what you want to do is recheck all those songs, then create playlists of just under a Gig and set up your iPod to only sync that playlist, not your whole library. Now only a some stuff goes on the iPod but also everything remains checked in your library.
An idea for a playlist might be something like this...
Shot at 2007-07-30
In this playlist it auto fills up to 900MB (since a "1G" nano is less than a gig. You can modify that number to whatever works for you) and it fills it up with the stuff that has been the longest since you last played them (this will also include any new/unplayed tracks). As you play songs, when you update the iPod, the playlist will automatically be adjusted to remove recently played songs and replacing them with songs that have not been played in the longest time (or at all), so you get an automatically changing/updating selection of songs on the Nano AND can leave everything checked in your library.
Patrick

Synching only selected songs from library

My library is in iTunes 9.1.1. When I go to the summary tab, I am only given the option of synching the entire library OR selected playlists,artists,genres. I used to be able to select (check) specific songs to be synced. Why is that no longer an option ? I don't want the entire library, nor do I want every song by an artist, which is what I get if I choose the "selected playlists,etc... option in the summary tab. The library is shared by myself and kids, who have their own playlists for synching their ipods. Synching selected songs is critical ( don't need Xmas songs or Miley Cyrus on my ipod).
Solutions ?
Thanks

Make your own playlists with the music that you like. You can exclude Christmas music or Miley Cyrus from your playlists.
You should still be abel to sync checked music. There should be a box to sync only selected/checked music.
I would still recommend using playlists. If the ipod crashes or if you want to play the unchecked songs in a shuffle or mix, you will run into issues. It is easier, in my opinion, to simply make playlists/smart playlists and then choose whatever playlists that you like to your device.

Only selected discs from Audiobooks on iTunes download to Nano

I get audio books from the library and load them into iTunes. They play in iTunes but when I check them to download to my Nano only selected chapters or discs are downloaded. Example, the book Einstein Chapter 1,2 5,6,7,8,9, 15,16 download fine but chapeter 3,4,10,11 etc don't download. I have reset 4 times but that does not help. I've looked at the files that won't download and they seem to be exactly the same as the ones that do download. I never had this problem with my classic version. Unfortuately it died.

Hi ,
i dont have the exact code which suits to your requirement
but declare the internal table
like
data: begin of itab occurs 0,
check type c,
fields
end of itab.
while filling the field catalog
fieldcatalog-checkbox = 'X'
for this check field.
and display the grid
now write this subroutine
*&      Form USER_COMMAND
      Called from within the ALV processes. Currently, '&IC1' is used
      to process the hotspot and display the document 'picked' by the
      user.
      PV_UCOMM    contains the sy-ucomm from ALV
      SELFIELD is a structure that contains all the data required to
               process a user selection. The following is an example
               of the SELFIELD structure and sample values:
FORM USER_COMMAND USING PV_UCOMM LIKE SY-UCOMM
                        SELFIELD TYPE SLIS_SELFIELD.
CASE PV_UCOMM.
    WHEN '&IC1'.
      loop at itab where check = 'X'.
append all these records to another internal table itab1
     endloop.
call function gui_download.
pass the internal table itab1 in the tables statement
and also you have to give the file path that may be static or dynamic
if dynamic you have to call the function module
f4_filename
and get the filename and pass the same value to gui_download
that will be download to the above said path
endcase.
end form.
reward points if helpful,
thanks & regards,
venkatesh

Play only selection

Similar Messages

Maybe you are looking for