Play/Pause controls not working properly after IOS 8

I like streaming content off of a website I visit in safari. Before the update, I was able to play/pause the content from the lockscreen, I was also able to do it using my apple earpods. Now this feature doesn't want to work properly. It will work when I start listening, but if I let it play or stay paused for more than a minute, the controls stop working. If I press pause in the lock screen, nothing will happen. However, when I Slide-To-Open, the audio will start playing (or pausing) like I intended.

Follow-up to my earlier post that iPhone 6 Bluetooth not working correctly. I purchased a Jawbone MiniJambox to use as a speaker phone in my office. Everyone in our company thinks they are the best. However, it is experiencing the same issues as with all my other Bluetooth headsets. Everything works except cannot answer or hang up calls pushing the buttons on the Bluetooth devices. The Bluetooth patio speakers in our courtyard also have the same issue. However, my colleagues using iPhone 5 and 5s who did not update to iOS8 are using all Bluetooth devices without any issues. Apple says it is a problem with my Bluetooth device. Come on Apple.... This makes 7 different Bluetooth devices with different manufacturers. You cannot possibly believe the problem is with the Bluetooth devices when iOS7 works perfectly fine...
On another issue, my iPhone 5s worked perfectly fine in my vehicle entertainment center connected via USB. The vehicle entertainment center had complete control of my iPhone and iTunes. However, now I plug in my new iPhone 6 and it no longer communicates with my vehicle entertainment center. Again when I called Apple, they said my vehicle entertainment center needed a firmware update. Are you kidding me... That is a bunch of BS...!!!

Similar Messages

Anyone know how to fix Bluetooth headset not working properly after iOS 8 update?

I have an iPhone 5S and I use a Plantronics PLT M20 model bluetooth headset. I am no longer able to answer calls by pressing the button on the headset, since updating to iOS 8. I also also cannot end calls by pressing the button on the headset. This only happened after iOS 8. The Apple Care rep stated that "this is most likely a problem with the bluetooth manufacturer and they need to update their firmware, so now it's just a waiting game until they do that". Is that correct? Anyone encountering this?
Related information....
Hi - I'm a student with disabilities and rely heavily on accessibility features that make my life easier. For example, I use a Bluetooth headset to trying answer phone calls and use Siri… I especially use the "Raise to speak" option for accessing Siri. Since updating my iPhone five us and my iPad air, I've been scrambling to access the "raise to speak" option for Siri without success. When I called AppleCare, the representative stated I should have that option to enable in my settings. When I explained to her that the option is not showing, she wanted me to reset my phone to factory settings. When I told her I googled the issue and found that it may have been removed in iOS 8… She put me on hold, Came back and told me I was right.
What's worse is that that my Bluetooth headset is no longer working with my iPhone 5S. She stated that it may being I needed adjustment from the manufacturer of the headset– Plantronics. All I know is that the apple care representatives seem confused and I am extremely disappointed in this really impacts my use of Siri and my phone.
When I asked her to submit feedback to her supervisor or the powers that be… I was simply asked to submit feedback to the Apple.com website. While I understand Apple might read that feedback, I also recognize that they don't reply and I don't feel that is great support to someone like me who has a disability and needs a solution. The"Hey Siri" option is not working for me.
Does anyone have any workarounds for the "Raise to speak" problem or the Bluetooth problem? Specifically, the Bluetooth issue is when I try to hit the button on my Bluetooth headset to answer a call or end the call. It's a Plantronics PLT M20 model.

Follow-up to my earlier post that iPhone 6 Bluetooth not working correctly. I purchased a Jawbone MiniJambox to use as a speaker phone in my office. Everyone in our company thinks they are the best. However, it is experiencing the same issues as with all my other Bluetooth headsets. Everything works except cannot answer or hang up calls pushing the buttons on the Bluetooth devices. The Bluetooth patio speakers in our courtyard also have the same issue. However, my colleagues using iPhone 5 and 5s who did not update to iOS8 are using all Bluetooth devices without any issues. Apple says it is a problem with my Bluetooth device. Come on Apple.... This makes 7 different Bluetooth devices with different manufacturers. You cannot possibly believe the problem is with the Bluetooth devices when iOS7 works perfectly fine...
On another issue, my iPhone 5s worked perfectly fine in my vehicle entertainment center connected via USB. The vehicle entertainment center had complete control of my iPhone and iTunes. However, now I plug in my new iPhone 6 and it no longer communicates with my vehicle entertainment center. Again when I called Apple, they said my vehicle entertainment center needed a firmware update. Are you kidding me... That is a bunch of BS...!!!

Find My Friends Not Working Properly after iOS 7 Update

Following update to iOS7, the Find My Friends app doesn't seem to work properly anymore. In particular, when the app is on, or running in the background (i.e. you can see it when you double tap the home button) everything is fine and my friends can see my location. When the app is killed, i.e. off or not running in the background, then my friends cannot see where I am.
That was not the case with the old iOS where regardless of the app running in background or not, my friends could still see my location. Has this happened to anyone? Does anyone have a solution?
Thank you!

Appreciate that, but it's not as useful now. Many users have the same issue, also see
https://discussions.apple.com/message/23105624#23105624

Iphone 4 Voice Control not working Properly after iCloud Contacts sync

Hi All,
I am facing a strange problem. Recently I enabled iCloud settings to sync contacts from my iPhone to iCloud.
It asked me that do I want to merge the contacts from iCloud onto this iPhone. Obviously I clicked yes.
What it did was actually not sync all but around 1/3 of my contact list and erasing the remaining. The other 2/3 of my contact list wasn't on both iCloud or iPhone.
So I decided to restore my iPhone from the backup i took just before enabling iCloud. But I forgot to switch off the iCloud settings for not syncing Contacts.
Although I recovered all my contacts from the backup, my voice control has stopped recognizing my remaining 2/3 of the contact list that did not actually sync.
It can recognize all the contacts that were synced with iCloud, but not the ones that got erased.
After backup restore, iCloud settings was switched to off state and I did not dare enabling it back on.
Has anyone observed this behaviour? I just cannot seem to get the voice control recognize the remaining 2/3 contacts at all. I tried renaming the contact that it recognized to some other name and it still does not recognize the new ones.
Please help me find out the reason for this and how can i fix it?

I'm getting this too. It's very slow and apparently thinks "Call Sue Newport" sounds like "Call Halfords" or "Call Halyards" and, most surprisingly "Call First Great Western".
I was wearing my Jawbone Bluetooth headset so it's nothing to do with background noise.
I tried the new "What time is it?" command which works but takes about 10-15 seconds to activate.

Note not working properly after iOS 7 update,

After installazione of iOS 7 and following, Note never worked more, I see just for half second that it is updated from other devices but any chance to use it again, it appear and disappear immediately, somebody can give me some advise pls?

Quite frustrating
Sounds are either non existent, or sound like they're going through a distortion pedal.
Tried a hard reset, and will likely attempt a clean install/restore next...
Ugh... Apple...!!!
Ipad 2, iOS 7.0.2

IPAD Speakers not working properly after iOS 7 update

Hi all... After updating iOS 7 my iPAD speakers are producing an horrible noise whenever I listen to music and while using skype it's really intolerable.. Can anyone help me to get rid of this?? Even while hearing songs through headset its producing d same noise.

Quite frustrating
Sounds are either non existent, or sound like they're going through a distortion pedal.
Tried a hard reset, and will likely attempt a clean install/restore next...
Ugh... Apple...!!!
Ipad 2, iOS 7.0.2

Plug and play speakers not working properly after upgrading to Windows 8.1

After upgrading to Windows 8.1, my plug and play speakers do not work properly. I have uninstalled and reinstalled them, and restarted. When I try to play music, nothing comes out. If I turn them off and back on, music will play for approximately 30 seconds, only from one speaker, then it turns off and fades to no sound. They worked fine until I upgraded to Windows 8.1. The manufacturer has not been able to successfully assist me. Has anyone else reported a similar issue after upgrading OS software? Any suggestions? These are fairly new speakers, less than 2 years old, and not used very much. I do have them installed via a K-V switch, and all other devices linked to the K-V switch are functioning properly (monitor and wireless keyboard). Any suggestions would be greatly appreciated.

@sisboldt ,
Hello and thank you for posting on the HP support forums.
So that I can better help you with your sound issue. Please post back with your full model and product number. Use this link to help you find the information.
HP Notebook PCs - How Do I Find My Model Number or Product Number?
Here is another link you may find useful. Please give it a read before posting back with your system information.
Advice for asking the "Very Best Question"
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

ITunes / iPhone not working properly after newest update...

iTunes is not working properly after the newest update... It dosen't see my iPhone, the program acts very sluggish, and has trouble loading the Store. Anyone have a solution or an explanation? I have tried the suggestions found in other threads ie. restart, re-download, charge phone, restart phone and so on. Nothing works. Everything was working fine until iTunes and the new ios were installed. After that it all went to crap. Thanks, Randy...

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Aluminum Wireless Keyboard not working properly after Firmware update 1.1

Hi,
Well, as the subject says, my keyboard is not working properly after I updated the firmware. The problem is that several keys (delete, down arrow, brackets and apostrophe) stopped working right after I installed the update. I never dropped it or hit it. And I did not stop or interrupt or did anything during the install. I take very good care of it.
I have already tried toubleshooting with the support page, restarting the iMac, taking off the batteries, setting it up with bluetooth again, going back a week with time machine and to reinstall the firmware. So, if you have something new for me to try, I will really apreciate it.
Thanks in advance.
Franco.

I have 24" iMac with the Apple wireless M&KB - I know this is basic but have you tried a fresh set of batteries? My KB will refuse to establish connection when batteries are on the weak side the firmware update may just be a co incidents. If your wireless mouse is working OK then I would guess the blue tooth is functioning.
Not sure about the 10.49 download - are your other file downloads completing properly? Are there any error messages?
Steve

My Iphoto does not work properly, after downloading Mavericks. How can I fix it ? loading Mavericks

My Iphoto does not work properly after downloading Maverick. How can I fix it ?

With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you mean by not working properly? Explain in detail.
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT

Camera not working properly after ios7 upgrade in iphone 4s

Iphone 4S
Camera not working properly after iOS7 upgrade.
It defaultly takes other effects that is chrome in filter section, once we wdit in phone it can brought to normal (without filter)
help me to solve this problem

Have you tried a battery pull? If the issue is still there, you can either take it to the store or downgrade your software to the previous version to troubleshoot.
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

Asha 501 : Whatsapp not working properly after 14....

Hi,
whatsapp is not working properly after software update, some times contacts never sync. screen goes pale and chat window doesn't show properly.
Looks like memory problem after the new updates or anything else?

Similar complains around the web. I'd recommend getting the phone flashed at a care point to see if that improves the situation.
Do wait for a couple of weeks for the full firmware files to be available at the respective care centers. AFAIK, they are not yet available in India.

HT201210 AUDIO NOT WORKING PROPERLY AFTER INSTALLED IOS7

After installed ios 7
photos not able to see fully
audio not working properly.... [no treble, no depth in sound, very low soung even the volume is full]
get strucks while playing games

This board is full of people that are update crazy...
even when they have perfectly good working systems.
i know i thought well it's just a security update not a major update.
Best advice... whenever updating the OS, unplug all
firewire devices.
will take note of that from now on.
Was this auto-update? Try downloading the file and
running the update again with all firewire devices
unplugged.
While the 828 is disconnected perform the factory
reset
again.
Disconnect the firewire cable from the 828mkII
-Press the Setup knob
-Turn the Setup knob all the way to the right
-Press the Select knob
-Press the Value knob
-Power off the interface and plug the firewire cable
back
in
-Power the interface back on
i have the original 828 not mark 2, so no reset i know of, just power on off.
After the Mac updates... reboot and plugin the 828,
see if that doesn't get you going.
pancenter-
cheers pancenter, i'll give it a whirl updating without the interface plugged in. thanks for all your help.

Camera led is not working properly after update

After updating to IOS 6.0.1 led is not working properly.
When filming , the led is burning very weak, and when lightsetting is turned to
automatic not at all.

Reset your phone first, hold the home and off button down until the apple symbol comes up. If that doesnt do it, then do a restore from your backup in itunes.

Photoshop not working properly after new installation

I have a brand new Dell desktop that runs windows 8. I installed the Adobe Creative Suite 5.5 Master Collection and got a message saying that there were errors during installation and some things might not work properly. I uninstalled and did it a second time. Same message.
I then spoke with an Adobe agent that helped me download a program to detect what the errors were. He said they were minor issues and shouldn't affect the programs. No help there.
I then spent hours today speaking with Dell on the phone and the rep took remote control of the computer and did a diagnostics check on the hardware. He said everything is fine. I asked him if it might be the video card needing an update so he ran an update. Same issues, no change.
We changed the compatability to windows 7 and still no change.
I then uninstalled the creative suite and tried installing it from the desktop. Still same problems.
These are the issues in photoshop:
1)When using certain tools (transform tool, crop tool) the images goes completely black.
2) The background switches at random- sometimes checkered, sometimes grey, and sometimes black.
3) Color saturation is incorrectly represented. It switches whenever it wants. For instance, when I zoom in and out it changes.
In Adobe Bridge some of the RAW images don't show in the program. Some I just can't open. Others open fine. Those images will open in Photoshop but not in Bridge.
So I have no idea what to do and this is becoming extremely frustrating. I should add I haven't had any problems with Lightroom and it works fine as far as I can tell.
What could be causing these issues? Could the install CD be damaged?

I turned off the GPU in Photoshop's preferences as you suggested and everything seems to work properly now in Photoshop. In Adobe bridge the files are also all showing now and there doesn't seem to be the same issue there either.
I also tried enabling the GPU and changing it to Basic and it continues to work, but when it is changed to advanced when enabled the problems arise again.
So it seems as though the problem is with the video card or its driver as you said. I am not 100% sure that the Dell rep updated the driver from AMD but I am pretty sure he did. I did go to the AMD website and ran a program to detect if the driver needs to be updated and it resulted in a message saying that the driver is up to date and current.
As you said this is just a temporary solution and I want to make sure I have a working GPU system. What do you think the problem is then? How would you suggest I proceed? Should I contact Dell and tell them the problem seems to be with the installed video card?

Play/Pause controls not working properly after IOS 8

Similar Messages

Maybe you are looking for