Play Prompt After Time Node in ICM

Hello,
I have a hotline script in ICM 7.5.10 that working perfectly except for one feature.
At the top of the script I have a time node defining closed hours. Open hours go down the script and the call is processed.
But when the closed hours are hit, I want to play a prompt saying were closed and then release the call.
Right now, I have the time node's closed hours going to a connector that points to a Set Variable for the media file, then to a Run Ext Script (Play message script) and then to the Release call node.
Yet the prompt does not play and the call goes out to failure link on the Run Ext Script.
Elsewhere in the script, I use this same layout and it works fine (including the prompt) so I know its not the recording or anything like that.
Is there something special about the time node that requires changing?
Attached is a screen shot.
Jason Ryan

Although I cannot see the entire script, so I'm guessing what could be wrong here.
It could be that you set the media server etc for CVP to play the file later on in the script, and thus this hasn't been set yet when you hit this node to run the external script. In my scripts, I always do this at the beginning of the script, checking from which routing client the call comes from, and then setting all the required CVP settings. The settings I mean are:
microapp.media_server
microapp.app_media_lib
Could be that when you hit this node where it fails, these are not yet initialized.
Again, it's a wild guess, due to the lack of the entire script overview.

Similar Messages

  • Problem with the "now playing"-function after timer sleep-mode

    At first: sorry for my english.
    I have the following problem with the Nano 6G: I set the timer of my iPod Nano to shut it down after a while of playing. When I turn it back on afterwards, the now-playing-button does not show the song that it played at last. Instead of that the nano is automatically set to shuffle mode which was not activated before and the now-playing-button will show any other song randomly.
    This does not happen when I switch it to sleep-mode with the button on the top, only when the sleepmode ist activated by the timer.
    Does anyone notice the same issue with his nano? How can I bring my nano to play the same song after the sleepmode, that it played before?

    Hey Ipaqman, that strange behavior of the Nano 6G annoys me for exactly the same reason: audiobook in bed + sleeptimer = losing the place. As You say, the 5G works better with that and I also hope that Apple takes notice of that issue and will solve it.
    Until that I got myself a "workaround". I create a new playlist on the device, with just the single audiobook in it, that is actually in use. This helps me finding back into it, as long as "now playing" will not work correctly with the sleeptimer.

  • After installing Maverick, my downloaded movies will not play in Quick Time.  It gives me the following error "You can't open the application "QuickTime Player.app" because it may be damaged or incomplete."  What can I do?

    After installing Maverick, my downloaded movies will not play in Quick Time.  I receive the following error message:
    You can’t open the application “QuickTime Player.app” because it may be damaged or incomplete.  So I tried to unistall QT and I get an error that says, You can not delete this application as it is a requirement for the OSX.
    Well I did find a way to delete it, by going into the various components and one by one deleting it.  Now I reinstall it and  the message is that this Quick Time is for an earlier version before Maverick 7.  SMH....Now what.?

    Hello, terrygav. 
    I would recommend processing a reinstall of Mavericks.
    OS X Mavericks: Reinstall OS X
    http://support.apple.com/kb/PH13871
    Make sure to backup all of your data prior to reinstalling OS X 10.9.
    Back up your Mac
    http://support.apple.com/kb/PH11371
    Cheers,
    Jason H.

  • Time Machine multiple password prompts after 10.5.6 upgrade

    Wanted to see if anybody else has noticed this behavior change since upgrading to 10.5.6. I back my MacBook Pro to a network drive shared from my Mac Mini. With 10.5.5 and earlier, I'd mount the network drive, and then set Time Machine to use it. I'd get one password prompt, for the initial mount of the network drive.
    Post-10.5.6, I mount the network drive (password prompt #1), and then tell Time Machine to use that drive, and I get another password prompt from Time Machine. I'm not sure why this is, and it seems like a behavior change. Has anybody else noticed these double password prompts after going to 10.5.6?
    --Bernie

    I have the exact same problem since upgrading to 10.5.6. The time machine arrows start spinning, and then stop with the exclamation point. I look at the dropdown and it says "Latest Backup: Delayed"
    When I open Time Machine Preferences, it tells me I have 32.2 GB of 232.7 GB available. And in latest backup, it says "Failed" with the little "i" in the circle. When I click the "i" it tells me "The backup volume could not be mounted."
    When I actually look at the contents of the drive (which definitely is mounted) I see a 200GB file (the correct size) named [name of my computer]_[some serial number].sparsebundle. The stuff in brackets is replaced since I don't know if that's the sort of thing that I should post.
    What seems odd (although I haven't looked at the volume enough in the past to know if it is odd), is that both the modified date and the creation date are March 27, 2008 which, I believe, is when I first started using time machine.
    The only other thing on that drive is a folder, "untitled folder"
    That's it. I'm not sure about whether it's trying to backup when not connected, but I think I remember that.
    Do these specifics fit with what you can see about the current state of your backup?
    Tom

  • We are currently having troubles with our iTunes. Playing different songs and randomly it changes the name of the song to pink time after time. We could go through 5 songs before it will change the next one to song title time after time and artist pink

    Hi I am having trouble with iTunes! Randomly when I click on a song in iTunes it changes the song title to time after time and the artist is pink.
    I could click on 4 songs and they will be normal but then the 5th one will change the info to time after time.
    I haven't done anything different or new, it started doing it all of a sudden, well that I have noticed anyway. Please help.

    Hello Schimi. The Time Capsule is a kind of product that offer you two possibility:
    - To use the TC as a router or as an external HD.
    The difference between WPA and WPA 2 are:
    - They are two kinds of internet connection.
    WPA uses dynamic key encryption , which means that the key is constantly changing and makes the invasion of a wireless network more difficult than WEP . WPA is considered one of the highest levels of wireless security for your network and is recommended if your devices support this kind of encryption . Newer routers offer WPA2 security . WPA2 is compatible with WPA , but offers higher security level . In fact, it meets the high standards of many government agencies . If the router and computer support WPA2 , this should be your choice.
    If you need any help or if you find some difficult setting up it you can contact Apple Support.
    I am sure that they can help you with that.
    I am sory for the delay. I holpe that you solve your issue.

  • HT1849 I bought a song(which is 5 1/2 minutes long), but it stops playing after 15 seconds and moves onto the next song. I bought this song in a set with 5 other songs, all of which play for full time. Is there anyway to fix this?

    So yeah, pretty much what the title says... Is there anyway to fix it? Like I said, ALL of the other songs play for full time. All but that one song.

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

  • How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again, time after time? (Windows 7 64bit US).

    How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again , time after time? (Windows 7 64bit US).
    I guess this may be a feature request. Adobe may think this is a good message for every new eBook.
    I sure would like to decide about that myself.
    Thanks in advance if this will be changed.

    singmk wrote:
    Decided to setup the mail for exchange on my N8 so I could see my work emails. Worked like a charm but after a couple of hours decided I didn't like being that contactable so deleted the mailbox.
    Now to the problem, during setup I was forced to enable the phone lock and had to pick a 7 digit alphanumeric code. Fair enough I thought and went ahead. When I removed the mailbox however the lock remained in place with the default auto time of 30 minutes. When I checked in Phone management there is no option to disable this lock so I thought I could at least change the default time to something bigger but when you try, it remains at 30 mins. You also can't disable the auto time as it pops up an error message saying can't unlock phone.
    Does anyone know if I'm missing something obvious here or is this something which can't be disabled once it's switched on? I've done a soft reset back to factory settings with no luck and the only other thing I can think of is re installing the firmware which seems a bit extreme.
    Would like to hope there is some way to have control over this. Can someone help?
    Which firmware your N8 having now? You can check firmware by choosing Call, then type *#0000#.
    My N8 works fine on security setting and able to define Phone auto lock period, by choosing Menu>Settings>Phone>Phone management>Security settings>Phone and SIM card>Phone auto lock period>User defined>Lock after(minutes)
    You will prompt to enter Lock code each time u define auto lock priod or enable/disable auto lock.
    Hope this can help you.
    If you find this post helpful, please show your appreciation by clicking the Kudos star at the left. If it provides you the solution, please click on the GREEN Accept as Solution button at below

  • How can I play all the videos I have saved to a playlist? I only am able to get one playing at a time then I have to select the next and play it.

    I am not able to get all/any of my videos to play one after another like my music playlists. I thought it worked once but I am not able to recall how.
    Your help is greatly appreciated. I am tired of having to go back after each video (be it a music video, tv show, movie...but music video in particular).

    The Videos that do not play - Are they all Checked.
    Right Mouse Click on a video, If at the bottom of the popup it has Check selection then that is what is missing. Suggest you select all your videos, Right clcik and mark all as checked in 1 go. Then your playlists will run through them.
    I think they only play one at a time because when you double click on them to pl;ay for that 1 video it overides the checked/ Unchecked feature

  • Doesn't seem to play podcasts after 1.02 update.

    My shuffle doesn't seem to be able to play podcasts after the 1.02 update. I drag songs onto the shuffle in iTunes and it loads. The playlist for the shuffle says the podcast file is on there. I disconnect the shuffle and hit play. The light blinks between green and orange a couple times and that's it. The little card that shows error messages says my shuffle is empty. I plug the shuffle back into the computer and iTunes still shows that file is on the shuffle.
    This has started since the 1.02 update. If I put other files like MP3s on my shuffle, they work fine. I've tried doing the 'restore' function and it didn't help. Podcasts tend to be bookmarked AAC files. So, is 1.02 having problems with bookmarked files?
    Anyone else having this problem?

    My shuffle doesn't seem to be able to play podcasts
    after the 1.02 update. I drag songs onto the shuffle
    in iTunes and it loads. The playlist for the shuffle
    says the podcast file is on there. I disconnect the
    shuffle and hit play. The light blinks between green
    and orange a couple times and that's it. The little
    card that shows error messages says my shuffle is
    empty. I plug the shuffle back into the computer and
    iTunes still shows that file is on the shuffle.
    This has started since the 1.02 update. If I put
    other files like MP3s on my shuffle, they work fine.
    I've tried doing the 'restore' function and it
    didn't help. Podcasts tend to be bookmarked AAC
    files. So, is 1.02 having problems with bookmarked
    files?
    Is your "shuffle"/"play-in-order" switch set to "play-in-order"?

  • Video clips won't play back after capture

    I am a long-time user of Premiere Elements, currently using version 9.0. I am capturing video clips from the same videocamera that I've used in previous versions of PE. My video clips won't play back after I capture them. The clip is in my "media" area, but when I try to play it back, the audio plays but the picture remains frozen on the starting image. What is happening?

    It is a Sony Handycam DCR-HC28, mini DV, using a firewire connection.
    Operating System is Windows XP Pro, Service Pack 3, system specs are SATA 2 RAID 1 with dual 1 TB hard drives. 4 GB RAM. As far as how fast my processor is, I looked on my invoice and it says, "Intel Core2 processor Q6600 (2.4 Ghz, 1066 FSB) with Quad Core technology and 8 MB cache, 4 GB DDR2 SDRAM at 800 MHz.
    I defragmented my hard drive before beginning and have 779 GB or 83 percent free space on hard drive.
    I have not placed my video clips on the timeline yet so don't know if there is a red line on top, indicating it hasn't been rendered. I merely wanted to play back my clip to set "in" and "out" points. This has never happened before in my long history of using Premiere Elements. Would prefer not to have to go back to PE 8, as that was a disaster.

  • IPod gets stuck when it starts play mostly after deep sleep

    Hi,
    I have a problem with my 60G Video iPod:
    Most of the times it gets stuck completely when I start use it after deep sleep (it hasn't been used for night etc.).
    The problem is very consistent:
    1. I turn it on.
    2. Start playing some song.
    3. See the 'normal' play screen (song timer is 0:0)
    4. Hear spinning and clicks of hard drive and ....
    5. It just freezes: doesn't response to any key (including Hold)
    Only Reset helps now and when I generally get Folder icon with exclamation point and
    it needs at least another reset to be able use it.
    I updated iPod to the last version (1.1) - doesn't help.
    It passed through Restore - same results: Every second turning on it gets stuck.
    Does anybody have/know about similar behavior?
    I think I have to ask Yeda for help?
    Any ideas?
    Thanks
    vov

    Welcome to Apple Discussions!
    Have you tried this, even though the folder isn't always there?
    iPod Displays A Folder With An Exclamation Point
    btabz

  • I've installed Flip4Mac WMV in Lion and when I try to listen to audio in some sites, it starts playing and after about 0.5 seconds it starts playing again. So, I have the same thing playing with a delay... What is happening and how to fix it?

    I've installed Flip4Mac WMV in Lion and when I try to listen to audio in some sites, it starts playing and after about 0.5 seconds it starts playing again. So, I have the same thing playing with a delay... What is happening and how to fix it? Is there any other way to play theese kinds of files without using Flip4Mac WMV?

    Use Flash Media Server to stream the files.......set up a timer and have all three of them play at once....and have a button switch the streams depending upon which stream you want to play.....and wallah......
    you can also capture the stream.time from the video playing and resume from that point on the other videos as well....havent done this theoretically so I dont know how smooth the transistion between streams will be....but it can be done....
    plus u may have to use double buffering techniques to make sure it starts up right away......
    thelegendaryghost

  • Add a button after each node of my tree

    Hi !
    I would like to add a button after each node of my tree. I think I have to create a new TreeCelleRenderer but I really don't know how to make it. Can someone help me and give me an idea (or an example !) about the code.
    When I click the button, I must know from which node the event comes.
    thanks.
    delph

    Hi, how did you resolve the problem. Well it's long time from your posting, but maybe someone else can help me...
    I'm creating similar JTree where's print and save buttons in some of the nodes. I created custom cell renderer which extends JPanel and holds images, text and the buttons inside it. Is it possible to link buttons' actionlisteners somehow to the nodes. I tried it customizing cell editor, but I can't get button events fired. I also tried to catch "button clicked" action using mouse listener in my tree and that worked somehow and can be used as quick and dirty solution. Still I want to do it better way.
    -e

  • When i run keynote in the play mode, some times the computer get stuck, why?, when i run key note in the play mode, some times the computer get stuck, why?

    when i run keynote in the play mode, some times the computer get stuck, why?, when i run key note in the play mode, some times the computer get stuck, why?

    hello,
    I had the same issue. This is what I was told to do.
    iWork has to be removed completely to be effective when re-installing, you must use an application removal tool to do this or it wont remove every Keynote file.
    Appcleaner   will do this and its free.
    The following procedure has helped solve many issues with Keynote:
    1  Close Keynote then use Appcleaner
    2  Empty the Trash
    3  Shut down the Mac, then restart and press the shift key immediately after the startup sound, then release shift when the Apple logo appears
              allow the Mac to boot up to the desktop, it will take longer then usual as the hard drive is being repaired
    4  restart the Mac
    5  Reinstall iWork
    6  Repair permissions:
              Applications > Utilities > Disk Utility > First  Aid:   click on your system disc in the drive column
              and select Repair  Disk Permissions
    7  open Keynote and test

  • Mountain Lion Download Pauses Time after Time

    I have set energy saver to never, and taken the additional step of playing iTunes music so the computer won't sleep during download, but it pauses time after time and has to be initiated from the beginning. I'm installing over 10.6.8.

    such an obnoxious time to download?
    It may depend on your internet connection speed. Anything less than 15Mbps and the download may time out before it's finished.
    http://www.speedtest.net
    Disable anti virus software and try turning off the Firewall in System Preferences > Security & Privacy > Firewall.
    Some ISP's limit the amount of data used for downloading so you may want to contact your internet service provider for details.

Maybe you are looking for