Playback continues yet audio is missing

I’m running the latest version on iTunes on Windows XP and all the firmware is up to date on the Airport Express I am streaming to.
However, sometimes when iTunes has finished playing a song and goes to playback the next song the audio stops. The new track appears to be playing as the playback bar in iTunes continues to move from left to right yet the audio has disappeared. If I stop playback and restart the audio re-appears.
Is anyone else having the same problem or can anyone suggest a solution to stop this from happening?
Regards

I am having a similar problem. After an installation period of 5+ hours for my Airport Extreme with windows xp(sp3), I can finally hear my itunes through my stereo. Everything is updated, itunes, APX firmware...7.4.1. However the audio cuts out, song keeps playing, audio comes back, then cuts out again. Can anyone end my frustration?
Message was edited by: jimit

Similar Messages

Audio Filter missing: Internal Volume Stereo - corrupt project?

Hi,
I am getting this error when I open my project. In addition, no media will play in the project either in the sequence window or the source window.
It all appears and will scrub (with no audio), but will not play.
I dug around a bit and I found that there is a known bug with audio from XML's and that is what I am using (convinced my client to migrate from FCP to Premiere - please don't tell me I made a mistake).
Everything worked brilliantly for a week, including the addition of audio filters, and then all of a sudden - bang. No more.
I have painstakingly deleted every audio filter and I am still getting this error. I have also tried a re-install.
Another oddity is that when I try to quit Premiere, it will not quit all the way without a force quit!
I'm running CC 2014 on a brand new mac pro.
Desperate,
dw

Steve and Bill,
I follow your advice, but it did not solve the problem. It is true that problems began when I used ZOOM recorder at 98kHz/24 bit in my current project (I already changed ZOOM mode to 48kHz/16 bit), but could this be just a coincidence?
In the meantime I checked the rest of my 16 projects (.prel), which were fine before. To my surprise I found that although all of them were made using EXACTLY the same method, some of them are still OK, but most I can not Playback. The messages appearing are of three types:
1. "Audio Filter missing: Internal Balance".
2. "Audio Filter missing: Internal Volume Stereo".
3. "This type of file is not supported or required codec is not installed".
In one case, when I opened a project the first time, the message was "This type of file is not supported or required codec is not installed", but when I opened it second time it said " Audio Filter missing:Internal Volume Stereo". It seems to be random.
Some projects can be opened, but when I try to Playback there is no sound.
I am completly lost. Please help.
Andrew

Audio Filter missing:Internal volume stereo

I am unable to back play a Pre project I am working on in the moment. When I open it, there is a message as in the subject of this post (Audio Filter missing: Internal volume stereo). Can someone help please.
Andrew

Steve and Bill,
I follow your advice, but it did not solve the problem. It is true that problems began when I used ZOOM recorder at 98kHz/24 bit in my current project (I already changed ZOOM mode to 48kHz/16 bit), but could this be just a coincidence?
In the meantime I checked the rest of my 16 projects (.prel), which were fine before. To my surprise I found that although all of them were made using EXACTLY the same method, some of them are still OK, but most I can not Playback. The messages appearing are of three types:
1. "Audio Filter missing: Internal Balance".
2. "Audio Filter missing: Internal Volume Stereo".
3. "This type of file is not supported or required codec is not installed".
In one case, when I opened a project the first time, the message was "This type of file is not supported or required codec is not installed", but when I opened it second time it said " Audio Filter missing:Internal Volume Stereo". It seems to be random.
Some projects can be opened, but when I try to Playback there is no sound.
I am completly lost. Please help.
Andrew

PPro CS4 - half of audio is missing from exported files

Hi all.
I'm currently working on a project in PPro CS4, and by that I mean that I've already completed the project. It was exported and uploaded to youtube for my boss, no problems. Then he asked me to combine the two videos, so I copied the second half of the video and pasted it onto the first half's sequence. The settings I used for the two sequences were the same. When I play the video in PPro everything works fine. When I export the video, however, the audio is missing from the second half of the video (the half I copied). The second half audio is on the same track as the first half of the audio, so the audio levels on the exported video should be exactly the same.
I've been browsing the forums and looking at troubleshooting pages but I still haven't found a solution to the problem. The video is intact; only the second half of the audio is missing. I have no idea why it's doing this or how to fix it.
I'd appreciate any input.
-RD

Yes, if he is exporting one file of video and audio then either the entire track is exported
or only the work area bar is exported for both video and audio. If he is exporting video and audio separately THEN they might be different lengths.
You might right-click the audio for the second section and select Audio to see if it is muted.
Try exporting the audio alone without video, listen to the audio in Windows Medica player and listen if all or only half of it exported. If all of it exported, then that narrows the problem.
You might try creating a new Sequence and pasting the video and audio into the new Sequence (don't just duplicate the sequence, that may just duplicate the problem). Then export and see if that circumvented the problem.
What format are you exporting to?

Audio file missing from MOV when exported as a quicktime movie.

Using Keynote 9, I imported video into presentation that was edited in iMovie 9. When I export the presentation to quicktime movie the audio is missing from the video file. The audio file plays fine in the standard keynote presentation mode.

This is STRICTLY a work around! Official fix will come from Apple as an update more than likely.
Duplicate item first (File > Duplicate). On newly duplicated project change file association type (File > get info). Under name and extension section take out .key). Close Get Info and save with removing .key. Double click to open the file (now a compression). Open uncompressed folder (same name as original file, now shows as a folder). Now in the Data folder find a .mov file named "Recording" with randomly generated letters and numbers behind it. Drag .mov file to desktop or any other directory. Open extracted .mov file with QuickTime to verify integrity. Save as audio file only. Get Info on file again and place .key value at end of file/extension for project. Open project. Under Play menu option delete the recording. Under Audio inspector drag the .mov of audio only to recording back in. Test play project to see if its accurate. Export to QuickTime and see if issue is resolved.
If issue persists:
Export with corrupted audio as QuickTime. Separate the audio from video track. Delete audio. Import the extracted .mov audio file. Share > File. Enjoy.

When importing clips to iMovie11 the audio is missing. I have been able to successfully to this in the past and all of the sudden it is not working. Any help to solve the problem would be appreciated.

When importing clips to iMovie11 the audio is missing. I have been able to successfully to this in the past and all of the sudden it is not working. Any help to solve the problem would be appreciated.
Thank you for your help!

Download/install an app is a know possible solution.
3. Install another app from the App Store
If all user-installed apps are not launching, it could be an Apple ID authorization issue. Download and install an app that isn't already installed on your device to reset this information.
Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
Above from Apple's :
iOS: Troubleshooting applications purchased from the App Store

Audio Filter missing . . .

I have experienced a number of crashes (iMac OS 10.75) in my Premiere Pro project + the warning "Audio Filter missing: Internal Volume Mono" How do I resolve this? It seems to be a 'project' problem.
Thanks for your help.
Nola
Message was edited by: Nola Schiff

I wish I could supply some help; I am having the same problem (newest version of Premiere Pro CC, just reinstalled in hopes of solving this problem, on a Macbook Pro i7 running 10.8.4 with 16GB RAM. It is rendering my project unusable. Help anyone?

Audio Filter missing: Internal Volume Mono

All of a sudden this error message started popping up
Audio Filter missing: 4:1635083896 1278365011 1802721110 Audio Filter missing: Internal Volume Mono
Also now my timeline is not working, some tracks are missing volume envelopes and when I scroll up and down it's all messed up and I can't do anything.
What's happening?
I tried re-installing the latest update CC 2014.1 but no go...
Help!!

OH man, Im also having loads of other audio issues with this update. Clicks, pops, audio often mutes on it's own. No audio comes through and there's screeching huge noise...ng
Really disappointed with this! Im paying good money for the CC and today alone Ive spent 4 hours trying to figure out these massive issues.
Im using multiband compressor and EQ and the instant I add those to the timeline the troubles begin.

FillOutInterfaceInfo - Impl kCSDTPObserverImpl not yet registered. Missing from factory list resource in plugin kCSDTPPluginID?

I know this is a very basic question and I also undestand that I have to include the same in my XXXFactoryList.h file.
But the issue is that I have included it perfectly every where and still I an getting this ASSERT due to this, no instance of my CSDTPObserver:CObserver is getting created
Please help to get this rectifiedFillOutInterfaceInfo - Impl kCSDTPObserverImpl not yet registered. Missing from factory list resource in plugin kCSDTPPluginID?
below code from file CSDTPObserverImpl.cpp
CREATE_PMINTERFACE(CSDTPObserverImpl, kCSDTPObserverImpl)
/* CSDTPObserverImpl Constructor
CSDTPObserverImpl::CSDTPObserverImpl(IPMUnknown* boss)
: CObserver(boss, IID_ICSDTPOBSERVER)
below code from CSDTPFactoryList.h:
REGISTER_PMINTERFACE(CSDTPObserverImpl, kCSDTPObserverImpl)
Below code from CSDTP.fr:
resource FactoryList (kSDKDefFactoryListResourceID)
kImplementationIDSpace,
#include "CSDTPFactoryList.h"
resource ClassDescriptionTable(kSDKDefClassDescriptionTableResourceID)
AddIn
kDocBoss,
kInvalidClass,
IID_ICSDTPOBSERVER, kCSDTPObserverImpl,
Below code from CSDTPID.h:
// InterfaceIDs:
DECLARE_PMID(kInterfaceIDSpace, IID_ICSDTPOBSERVER, kCSDTPPrefix + 6)
// ImplementationIDs:
DECLARE_PMID(kImplementationIDSpace, kCSDTPObserverImpl, kCSDTPPrefix + 5)
Can some one please point out the mistake I am doing here???

Hi Dirk,
Please see below configuration in XXXID.h file:
// ImplementationIDs:
DECLARE_PMID(kImplementationIDSpace, kCSDTPServiceProviderImpl, kCSDTPPrefix + 0)
DECLARE_PMID(kImplementationIDSpace, kCSDTPIndesignResponderImpl, kCSDTPPrefix + 1)
DECLARE_PMID(kImplementationIDSpace, kCSDTSelectionObserverImpl, kCSDTPPrefix + 2)
DECLARE_PMID(kImplementationIDSpace, kCSDTPObserverImpl, kCSDTPPrefix + 3)
DECLARE_PMID(kImplementationIDSpace, kCSDTPStartupShutdownServiceImpl, kCSDTPPrefix + 4)
Above configuration is giving me below ASSERT:
FillOutInterfaceInfo - Impl kCSDTPObserverImpl not yet registered. Missing from factory list resource in plugin kCSDTPPluginID?
Now I changed the configuration as below:
// ImplementationIDs:
DECLARE_PMID(kImplementationIDSpace, kCSDTPServiceProviderImpl, kCSDTPPrefix + 0)
DECLARE_PMID(kImplementationIDSpace, kCSDTPIndesignResponderImpl, kCSDTPPrefix + 1)
DECLARE_PMID(kImplementationIDSpace, kCSDTSelectionObserverImpl, kCSDTPPrefix + 2)
DECLARE_PMID(kImplementationIDSpace, kCSDTPObserverImpl, kCSDTPPrefix + 4) //<-------changed from 3 to 4
DECLARE_PMID(kImplementationIDSpace, kCSDTPStartupShutdownServiceImpl, kCSDTPPrefix + 3) //<-------changed from 4 to 3
Now it is giving below ASSERT:
FillOutInterfaceInfo - Impl kCSDTPStartupShutdownServiceImpl not yet registered. Missing from factory list resource in plugin kCSDTPPluginID?
Now this looks really wierd. I also tried with some random combinations 5,6,7 but none is working and some how 3 is not working but 4 is working. Now how can I decide which
is going to work and why 3 is not working here.
Please enlighten me if any one has any clue here

Q10 ring tone continues to play after missed call

using q10.
the ring tone continues to play after missed call. tried to change the ring tone from song to default ring tone available in the os but the problem remains the same.

I recommend installing the official version 10.1.0.4181
By now also tell them that these errors will be fixed in the next official update to OS 10.2 is expected to be available soon.
My thinking about the end of October.
Regards.
Kudos ** Do not forget to give those people who help and advise you regarding your questions ** Can
Accept as Solution to ** Comments **
@gutijose14
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

Ring tone continues to play after missed call

Hi,
When i got a missed call, the ring tone continues to play after missed call. tried to change the ring tone from song to default ring tone available in the os but the problem remains the same.
I had the latest 10.2.0.249 OS

I recommend installing the official version 10.1.0.4181
By now also tell them that these errors will be fixed in the next official update to OS 10.2 is expected to be available soon.
My thinking about the end of October.
Regards.
Kudos ** Do not forget to give those people who help and advise you regarding your questions ** Can
Accept as Solution to ** Comments **
@gutijose14
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

A portion of the audio is missing on the end of clips?

Using Adobe Premiere Elements 7 a portion of the audio is missing on the end of clips after I bring it in. The files are motion JPEG AVI .

Welcome to the forum.
I do not recall seeing any issue with muxed MJPEG files, regarding truncated Audio. First, take a look at this ARTICLE on MJPEG files.
Next, all Audio files (muxed or elemental streams) must be Conformed, which converts them to 32 bit, floating point files for editing. If one does not allow the Conforming to complete 100%, the Audio can be truncated. See this ARTICLE.
Good luck,
Hunt

I am trying to insert a cut photo into a movie clip. the cutaway photo appears above the clip and cuts away when you move the curser across it, but does not show the cutaway when in playback. What am I missing?away

I am trying to insert a cutaway photo into a movie clip. The cuaway photo appears over the clip and will appear in the clip when you manually moce the curser across it, but will not appear in the clip during playback. What am I missing?

Try using the SHARE menu to share your movie in the sizes you need. It should work on the shared copy.
Another thing to try would be to restart your Mac so you have fresh memory.

Audio Host Missing

Hi,
the host audio is missing in our recordings, the participants audio is on but Host audio is off.
The host audio is missing in a point of recording meeting.
The problem is only in the recording, in a meeting we don't have audio problems.
Thanks

Was your meeting host on computer running Windows 8.1? We see recordings with missing audio and video (when it was present and fine during the live meeting) all the time. The meeting hosts with the missing A/V always seem to be on Windows 8.1. These recordings can typically be fixed using JAYDEEP's Recording Repair Assistant, but it's quite a hassle to fix many of these each week.
In September 2014, we also reported to Adobe Support an intermittent issue where the screenshare from a Windows 8.1 computer occasionally freezes for the remote Connect participants. If this issue is not resolved during the live meeting (by the Host exiting the meeting, rejoining, and sharing his screen again), it isn't possible to fix the recording to restore the screenshare. Adobe acknowledged this issue and told us it will be fixed in 9.3 (not), 9.4 (not), and now 9.5.
I don't know how anyone uses Adobe Connect from a Windows 8.1 computer. More importantly, I can't imagine how Adobe can afford to take almost a year to resolve an issue with such a popular client operating system.

I'm trying to watch an audio enhanced presentation using Adobe. I'm able to view the slideshow however, the audio is missing. Any suggestions?

I just purchased my firt MacBook and am having some trouble running Adobe. I'm trying to view an enhanced video presentation using Adobe Flash Player. I can see the slideshow, but the audio is missing. I've downloaded a recent flash player and reader but I get nothing. Any ideas?

If your computer is running Snow Leopard, and is not at 10.6.8, you could use
Software Update to get final Combo Update 10.6.8 v. 1.1 for Snow Leopard.
Aside from that (you may have already done so) here is a free-running
application that may help your line-in audio, by the name of LineIn
http://www.rogueamoeba.com/freebies/ and it suggests possibilities.
There also are USB input methods using those for audio; not sure what
is still available, a few great ones no longer were. One from Belkin a few
years ago, called the iMic, offered great options over USB.
Hopefully the free application can help.
Good luck & happy computing!

Playback continues yet audio is missing

Similar Messages

Maybe you are looking for