Playback delay after creating in/out points

Hi, I'm editing with Premiere CS6 on a 2008 Macbook pro in OSX 10.6.8. I'm using Multi Camera Source Sequences (with two camera angles) and having an issue when setting In and Out points in the Source Monitor. Playback works fine, but as soon as I set an in or out point, the playback immediately has a delay. So the audio is completey out of sync with the video, by a large degree. In fact, I can't even tell as it's so out of sync. If I remove the in and out points, then playback returns to normal. Any ideas as to what may be causing this issue?

You need a Mac user to come along and give you better advice, but meanwhile, Goggle
photoshop cc lag yosemite
You are _not_ alone.

Similar Messages

Delay after zoom in/out

After I use command+space+mouse drag to zoom in/out and release buttons, there's always a 1-2 seconds delay.The function and mouse pointer stays in zoom mode.I'm using iMac,27-inch,late 2013 with osx 10.10.2.PS version is 2014.2.2.I'm thinking there's problem in video ram and GPU? Please help.

You need a Mac user to come along and give you better advice, but meanwhile, Goggle
photoshop cc lag yosemite
You are _not_ alone.

Prelude not creating In/Out points when ingesting P2 footage

I'm working on a Windows 7 (64bit) machine and I'm ingesting footage off of a P2 card reader (connected via usb). In the Ingest panel I marked In/Out points on several P2 files using "I" and "O" keyboard shortcuts. I ingested the footage with the transfer options set to transfer to a new directory on the hard drive (no transcode) with the verify transfer checked. The files seemed to transfer fine and they showed up in the Project panel. When I played them in the monitor I discovered that the In/Out points I set prior to the ingest were ignored.
Prior to ingesting the P2 footage I ingested some AVCHD footage with a transfer and transcode to P2 Movie. In that case the in/out points that I added in the ingest panel were respected when I played them back in the monitor after the ingest.
So, does the setting of in/out point in the ingest panel only take effect if you are transcoding footage?

Current input suggests creating subclips would be acceptable. So the net result you would see in the project panel after ingesting a clip with In/Outs set would be a master clip (representing the full clip) and a subclip representing the In/Out range specified.
Is this what you would also expect?
Michael,
Thanks for your quick response. Yes, making subclips makes sense...although I guess I don't see much advantage of creating subclips prior to ingest vs after...especially when after ingest you can establish multiple subclips on one master clip. On this specific project I had lengthy pre and post roll on several shots which I was hoping to eliminate by setting in/out points prior to ingest - so that after injest I would have only clips with relavant action.

Video after In and Out points Changed

After opening up a video in the Viewer and setting In and Out points, and dragging it back to the Browser afterwards:
1. I tried changing the name of the clip that I dragged back to the Browser, though it changed the names of the other clips in the Browser to the same name. Why?
2. How come when you double-click on the new clip and it shows in the Viewer, it shows the In and Out points as well as the video from the original segment around it. Is this the way it is supposed to be? I thought it was supposed to just display the segment of video starting with the In point and ending with the End point.

1. do some reading in the manual. Might try making the clip independent.
2. Yes. I know it may seem weird, but it has some really powerful uses. Double click on a clip in the timeline, it loads in the viewer. You can then change your in and out points in the viewer and they will be reflected in the sequence. (with some limitations). If you want to "isolate" the material between an in and an out, check out "make subclip."
This is very basic fcp stuff. Skim the manuals, explore the menus, you'll figure this stuff out pretty quickly.

QT playback delayed after upgrade to 10.6

Just upgraded MacPro Dual Quad to 10.6.
Ran all the updates - everything is current.
Something happened to QuickTime playback, both V10 and V7 Pro have problem playing regular mp4 or m4v files, same ones that my MacBook Pro with 10.6.2 plays just fine.
In short - click on Play button in QT 10, and nothing plays, after a while "application is not responding" will appear in Force Quit window.
Using QT 7 Pro is a bit better, but it takes about 5 seconds till it starts. Sometimes I get a rainbow ball till it start playing....
I ran Snow Leopard Cache Cleaner, then four utilities programs - Disk Utility, Drive Genius, TechTool Pro and Disk Warrior from MacBook while MacPro was in FW Target mode.
No luck.
Downloaded QT 7 to reinstall, but it doesn't let me as QT is "already installed on this drive." And would it help QT 10, that's another question.
I am not new to computers, but seems like a hit a wall.
Am I the only one "lucky" with this ot somebody else had this issue as well?
Any thoughts on what to do next?
Anything will be greatly appreciated!
:: Iggio ::

Hello David,
Thank you for your reply!
I was not clear enough first time, sorry. QT 7 was installed originally during the 10.6 upgrade, I wanted to have it as I have QT Pro license and use its editing features. In my case, QT 7 had a bit less of delay then QT 10 Player. I wanted to reinstall QT 7 hoping it will wipe out some old prefs or other files that may be were left from 10.5... That's when I couldn't install it again, as it was already there.
At this point I crossed the threshold of patience and wiped everything clean.
I had a backup of 10.5.8 of this drive that I made right before 10.6 upgrade (which I recommend to anyone to do), and now I run my MacPro from that drive.
I installed 10.6 after I erased the main drive completely, and will reinstall all the apps and plugs again. It is a massive pain, as I have many audio plugins and video applications, but once it is done the result is usually worth the time and effort.
My friend at APPLE Store always tells me - upgrades are for those who has no patience or on the road Well time for me to have patience.
Thank you for reply - you were the only one out off thousands on this discussion board!
All the best!

Auto triggering after creating change pointer

Hi,
Has anyone setup their ALE Master Data Distribution to trigger program RBDMIDOC automatically after creating a change pointer?
Cheers,
Neil.

Hi Neil,
The program RBDMIDOC needs to be scheduled to run in backgroung by creating a variant for Messge Type with the Message Type you are using for your Master Data Distribution, and with the option 'Only for Background Proc.'.
Also schedule the program RBDCPCLR for periodic execution in Background. All change ptrs generated by the program RBDMIDOC will bedeeted y the system.
Regards,
Nitin

CS6: exporting "range of time markers" without setting in-/out point or defining working area?

Hi,
in CS6 I defined several "range of time markers" to get a better overview of my project. Now I want to export each range as a single video.
The only way to do this is creating in-/out points or setting the working area (what is the English translation for "Arbeitsbereichsleiste" (German)...?)?
Or is it possible to define this selections via the previous created range of time markers? That would be the easiest way...
Thanks, Carlos

For exporting chunks of the Timeline, I set a Work Area and then export. If you want to export between markers, that would be a feature request: http://www.adobe.com/go/wish

After update all of my subclips have different in and out points

After updating Premiere Pro CC all of my subclips now have different in- and out points. It´s hundreds of subclips and they have nothing to do with how they´ve been before. The In-Point is always the In-Point from the original Master-Clip, the out-Point seems to be totally random. So I can´t work with them at all. Can I go back to the previous version or can I get my subclips back somehow? THANKS!!

There are no viruses that can affect Apple OS X.
What files do you keep on the Desktop? How many?
Performance tip: Keep the Desktop clutter-free (empty, if possible)
Mac OS X's Desktop is the de facto location for downloaded files, and for many users, in-progress works that will either be organized later or deleted altogether. The desktop can also be gluttonous, however, becoming a catch-all for files that linger indefinitely.
Unfortunately - aside from the effect of disarray it creates - keeping dozens or hundreds of files on the Desktop can significantly degrade performance. Not necessarily because the system is sluggish with regard to rendering the icons on the desktop and storing them in memory persistently (which may be true in some cases), but more likely because keeping an excessive number of items on the Desktop can cause the windowserver process to generate reams of logfiles, which obviously draws resources away from other system tasks. Each of your icons on your desktop is stored as a window in the window server, not as an alias. The more you have stored, the more strain it puts on the window server. Check your desktop for unnecessary icons and clear them out.
Keeping as few items as possible on the Desktop can prove a surprisingly effective performance boon. Even creating a single folder on your Desktop and placing all current and future clutter inside, then logging out and back in can provide an immediately noticeable speed boost, particularly for the Finder.
And it is why Apple invented 'Stacks' for Leopard.
Here is Apple's take on the subject:
http://www.apple.com/pro/tips/immaculate_desktop.html

After creating a DVD with music, the pictures all come out fuzzy and not sharp. Why

After creating a DVD with music, the pictures all come out fuzzy and not sharp. I have tried all the options, and nothing works, they all come out fuzzy. I have wasted about a dozen DVD's

Have you tried enhancing and sharpening in Premiere Elements before burning to disk?
What steps are you doing exactly?

How to find out idoc num after creating a costomer or vendor .....etc

hai
i had to find out idoc number after creating a customer, for that particular customer, i know to find out bygoing to the transaction WE05, but it is very tedious to find the idoc num for that particular customer, is it possible to find from the application it self with out going to WE05
if so please help me,
reward guarenty
thanks in advance
sindu

Hi ,
In Customer Display Tcode -- XD03 ,
Extras ---> Customer Partner Function ---> ( Pls check Logical System LS )
Regards.

In fcpX....how can I put an IN and OUT points in my sequence and after export a movie???

In fcpX....how can I put an IN and OUT points in my sequence and after export a movie???

You can't. You can't export part of a sequence. Duplicate it and remove the bits you don't want to export from the duplicate.

Retaining IN or OUT points in timeline after the edit?

Is there a way of making either an insert or overwrite edit into
the timeline, and after having completed the edit, RETAINING
either the IN or OUT points in the timeline that you used for that previous edit, or BOTH, so you don't have to set them again, for subsequent edits that might need either the IN or OUT point? Lets assume you made that first edit by setting
IN and OUT points in the timeline, rather than just leaving the timeline playhead
in a spot on the timeline and set the outpoint on the source footage of the viewer.
Lets assume you actually placed IN and OUT points in the timeline to acheive that
last edit.
I know you can just set the playhead somewhere on that clip
you just inserted and hit X To get the in and out points of the
clip you just inserted, but can you accomplish the same thing
without having to "restore" the in and points in this manner?
Thanks.

Can't think of any way. You're way ahead of most people if you know about typing X to select the clip under the Playhead. That's the best way. There's also Mark to Markers (Control-A), but that's even more steps. In some cases that might be of help. You have to watch out for selecting the first frame of the NEXT clip when setting the end marker, though. If you use Down Arrow to get to the end of a clip, you're actually one frame into the next clip. Use Left Arrow to back up one.
Russ

Clips shift in and out points after render (Dissolves messed up too) Urgent

Hello all, I have a frustrating and urgent problem.
I'm working with DV NTSC footage at 23.98 fps, shot 24pA and captured with the advanced pulldown removal from a dvx100.
The problem arises when I am rendering my footage from a color correction, etc, the in and out points of my shots change and the shot seems to shift. The cut points don't change, but the shot shifts position within them, almost as if rendering has caused final cut to use the slip tool on these and move them ever so slightly forward or backward.
This problem is also effecting my dissolves, causing them to start to dissolve then suddenly jerk into another part of the clip and then back to the shot that it is transitioning to.
I have tried outputting a QT movie of my timeline (in order to color correct that instead and avoid a render), but as you may have guessed, this only results in a QT movie with all of the above problems.
It is very similar, if not the same, as the problem described here: http://discussions.apple.com/thread.jspa?messageID=8096178&#8096178
I'm under a deadline and any help would be very much appreciated.
Thanks all,
Nathan

I've had that happen before. Crazy as it sounds, I "solved" it by laying a large video file over the top of the timeline (covering everything) then brought the opacity down to 0%. Go figure but it worked; everything straightened out and rendered fine.
Ghost in the machine for sure.

Setting In and Out points

Is it me or is it a complete PAIN to set in and out points in 7? Used to be easy. It's almost impossible sometimes to grab the playback head without it selecting an i/o point. Once I finally do get the markers where I want 'em, the In point moves when I press play?
What the ****?

You can use the arrow keys (right left) to step through frames. You can use the letters i and o to set in and out points.
Hold down the shift key (after setting a point) and you can use the arrow keys to create a selection.

Issues :- after creating sales order mail goes to customer

Hello everybody , my requriment is that
after creating the sales order , the sales order number goes to the customer
so how can i solve this requriment
i tryed to find out user-exit but i didn't get proper EXIT point .
please help me out
ASAP

Hi Sandeep
Your requiremet is not clear.
I hope you want to send Sales order details to Customer via email.
If Yes.
You can configure in NACE transaction for Medium 5, this is purely functional, contact your functional consultant
Regards
Madhan

Playback delay after creating in/out points

Similar Messages

Maybe you are looking for