Playback gives black screen after a few times

Hi!
This is my problem. I just installed Adobe Premiere CS6. After trying it a few hours the program has allready frozen a dozen times and unexpectedly quit a few times. Is there some major bugs in the CS6? (One of the recurring problems is the playbutton in the playback window to stop responding. Nothing happens when I click it) Also, I can't find the adobe upater anywhere on my computer, but once in a while it opens atuomatically so it has to be here somwhere. Where is this program located and how can I manually check for updates?
But, the biggest problem is this: when I add a clip to the timeline it first plays back just fine. But then, after adding another clip to the timeline, or a few minutes later, it suddenly doesn't playback anymore. It plays the sound, but the window is just black. The only way I've been able to get the picture back is by restarting the entire program.
I'm very new to Premiere Pro, has up until now only worked with InDesign and Photoshop so it might just be something I'm not understanding how to do but it seems like very strange behaviour to me.
I work on an iMac with OS X 10.7.5
Adobe Premiere (6.0.0 (319 (MC: 264587))
Help would be much appreciated!
Thanks!

I just tried to install Premiere on my new MacBook Pro as well but I'm still not able to playback the picture. The sound works but the playback screen is completely black.
MacBook Pro (Retina) OS X: 10.8.2.
Adobe Premiere Pro CS6: Version 6.0.2 (072 (MC:264587))
Source Footage: Quicktime (56 gb in one file): Apple ProRes 422, Linear PCM, Timecode.
I also have some smaller clips in this Quicktime Codec: H.264, Linear PCM.
No error messages. Sometimes the program just freezes and I have to force quit it. Or it just won't playback.
It was a entirely fresh install of the software. I'm a member of adobe cloud so I downloaded it from the application manager.
I'm also running photoshop and inDesign which are working just fine. At the time i launched Premiere no other Adobe programs where running. Just programs as: textedit, mail and evernote.
No third-party codecs installed.
Tried to update Premiere with the latest updates but that didn't do any difference.

Similar Messages

What does the upgrade process look like? Black screen after a few minutes o

Hello,
I just received a new Macbook Pro. I turned it on for the very first time, entered in my name and password, etc. Then I inserted the SL upgrade diskd circular arrow, then black screen again.. It started up, I acknowledged the license agreement, it said it would take 56 minutes to install. So I walked away. Came back ten minutes later to a blank screen. It would not respond to swipe or click, i.e. no wake-up. After a few more minutes the computer seemed dark, cold, silent. Holding down the power button finally started it back up.
Disk spun, Apple log and spinning arrow, then blank screen again. I was finally able to eject the upgrade disk. I had to re-install Leopard and parts of iLife.
So what is a normal looking upgrade? Should the screen go blank? Did I screw things up with lack of patience?
Any insights appreciated.
Thanks, Joe

donv (The Ghost) wrote:
The screen should not go black.
Actually, this is normal for the default installation method (IOW, not starting by running from the DVD). The installer will first run some checks & then transfer a bunch of files to the drive for later use. The screen will be normal while this happens, but eventually the installer will restart the Mac & for a while the screen will be black -- typically less than a minute but sometimes longer. After this, the screen should reappear.
So, it is best to be patient & give the process some time to continue before deciding something is wrong & forcing a shutdown or restart.

Dv7-4065dx ; lined then black screen after a few minutes

Hi there,
The monitor on my HP recently began malfunctioning. A few minutes after start-up, the screen becomes vertical gray and black lines and/or goes black. It does not seem to be overheating. What could be happening here?
Thanks!

Hi,
Can you boot into BIOS and verify that the lines do not show up in BIOS? If so, this may be an issue with the driver. Is this a new issue or has it been this way since you bough it?
Please check this video for instructions on how to perform a system restore: https://www.youtube.com/watch?v=pK4I7dzMQ6I
-Chris
I work for HP.
Support Forums are now on your mobile phone: http://m.hp.com/supportforum

After a few times VB shows white or black page

Hi,
I used the demo program BI_GUI_SAMPLE1.
The program start initially with a good screen.
after about 6 times i get a white screen, or black screen or nothing.
Like the picture blow. The programm is running but doesn't show a map.
I copied the program, made some modifications but i can't get it working.
I need to close all sessions and SAP-GUI.
Starting again, it works for 6 times.
Maybe helpfull:
I can't get the WebDynpro version working due to ACF problems.
Does anybody know how to fix this?
Best regards
Maarten

Hello Maarten,
please update to the latest version VB2.1 PL4 released wednesday. The prior version had some serious resource leaks which might cause your issues.
In order the get the WD version running with ACF please check this article as a starting point:HowTo setup Visual Business Native Client.
Best regards,
Uwe

Black screen after startup - Satellite A105-S4334

it gives me black screen after windows logo display right after the appearance of the cursor, and nothing i can do except hold on the "Turn off" button, and then restart again, it shows the menu to whether to start in safe mode ... network mode ... normally or lastest know good windows start ....
when it starts for the second time it works fine, it does this all the time and now i'm reinstalling windows for the 2nd time (factory-state) any solution or explanation for this issue?

no, i didn't, nothing connected to it yet.
what trials i did:
i reinstalled my own windows XP and it didn't show this, but because the PowerSaver error msg. and returned back to the manufactuer state CD, and same black error occurs.
Notices:
1- when i do restart it doesn't happen
2- right away after it happens and hold on the power button till it shuts down and turn it on again, and it works fine.
3- i don't know is this has nothing to do with DVD/CD rom message comes after start up asking to disable DVD-Ram option or not? but i always answers NO
hope these info helps you helping me :)

Black screen after BIOS update

Hi there,
After updating BIOS with regular HP software (i forgot the name now), the computer shut down and from that moment when i turn it on the screen stays black (with computer apparently running). I read so many posts with similar problems and i tried few things but without success. I know that i am very close to solve the problem but from all the suggestions i am now simply confused. I would like to ask, if someone can guide me through step-by-step procedure, i figured out that i need to install a BIOS version on USB-stick, but exact details i am obviously missing.
I have HP Pavilion dv 6700 Entertainment PC and new HDD inside without HP_TOOLS on it.
Thank you veeeeeryyyy much!

Hello @milence,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your computer is experiencing a black screen after updating the BIOS, and I would be happy to assist you in this matter!
To return the BIOS back to factory default settings, I recommend following the steps in this document on Restoring the BIOS. If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Black Screen after computer boots to Win XP With NX6600 VTD 256

My son recently purchased a new computer and gave his old one to me to salvage what I wanted.Since he just a few months ago purchased my NX6600 VTD 256 from me I naturally salvaged that first. I tried to install the NX6600 in my other son's computer without success. First the particulars:
MSI 845 Pro2 Mobo, 512 mb 133 Mhz Ram, 1.7 Ghz Intel CPU, Aopen AO350 12A PNF power supply, 350 watts with 18 amps on the 12 volt rail.
I did a fresh install of winXP on a freshly formatted HDD. Installed service pack 2, the latest intel drivers, and 5 different versions of the driver packages including ver 77.77 all with the same results.
After the computer boots I am intermittantly faced with a black screen after the WinXP logo disappears. This sometimes happens 3 times in a row before I get a working screen. After a good boot the NX6600 benchmarks good with very good marks!
I am at this point strongly suspecting the power supply is not up to the task, even though the specs for the NX6600 recommend a 350 watt power supply. Before I start removing all the hardware from the computer except for the NX 6600 to see if I have a hardware conflict, I doubt this because with the NX6600 installed without drivers I get a good boot every time.
I'm open for suggestions.

Thanks for the reply boss killer.
I tried what you suggested with a CRS power supply 300 watts with 15 amps on the 12 volt rail.
with the exact same results.
I then put the crs powersupply back into #1 son's old case reinstalled the nx6600 and gave it a go
Particulars for the old computer ECS K7VTA3 ver. 1 Mobo with 512 Mb DDR, nx6600VTD256 vid card and the CRS Power supply 300 watts with 15 amps on the 12 volt rail , and win XP pro service pack 2.
Funny the card works great without any problems with this setup! And the powersupply is 50 watts less and only 15 amps as compared to the other with 18!
I then pulled all the hardware out of #2's computer and tried it with only the memory, cpu, and NX6600 connected.
I had to boot 5 times before I had a working screen.
Now I'm thinking that there is somthing amiss with the NX6600 and the MSI 845 Pro2 ???
I'm thinking that I would be better off installing the K7VTA3 in #2 son's computer with the NX6600, since this works fine. When I did a benchmark with this setup it outperformed the *45 Pro 2 NX6600 combination By 300 points 2600 as compared to 2300 aqua mark points.
Isn't this fun?

Satellite M70 - Black screen after recovery installation

So far what I have done is put in the Product Recovery DVD-ROM. Then when restarting my computer I was prompted to restore my computer to the factory defaults and said. After it went through that process it told me to remove the disc so I did. Now all it does is reach a black screen after the Toshiba screen that gives me the options to f2 for setup and f12 for options.
I do not know what to do now to make my laptop work again. Please help.

Satellite M70 is old notebook model and I would like to know do you use recovery disc for the first time. I had Satellite M70-159 long time ago and have installed recovery image many times.
Which installations mode you have used: standard mode or expert mode?
Try to install it again.
As Xardas wrote try to obtain Microsoft installation disc and check if everything works well.

GTX590 Cant access NVIDIA control panel Black screen after 10 mins

Hi,
I recently purchased an MSI GTX590 and encountered this problem " Cant access NVIDIA control panel Black screen after 10 mins". I am running Windows7 Ultimate SP1.
I did have an xfire setup of 2xHD6970's, I uninstalled all the old drivers then used driver sweeper to clean out any remaining folders, also uninstalling them from device manager.
Next I installed the latest version of drivers from the NVIDIA site only to find that I am stuck in safe mode resolutions for my screen I cant access the NVIDIA control panel as it is saying " You are not currently using a display attached to an Nvidia GPU ". In device manager it states that
"Windows has stopped this device because it has reported problems. (Code 43) ".
I have now uninstalled and reinstalled about 6 different versions of drivers from NVIDIA including the latest BETA drivers which all have the same issue??????
I have also gone to the MSI site and downloaded their latest recommended drivers for the GTX590 NVIDIA Graphics Drivers Version 267.91 which are the only ones that seem to work as in it fixes the screen to the proper resolution and lets me into the NVIDIA control panel yet after about 10-15 mins the screen will go black or the computer will just freeze. Rebooting causes the same issue after 10-15mins
I have noticed a few others out there experiencing the same problem but no fixes as of yet any ideas??

Thankyou for the reply,
Tested the card in another working machine capable of running and its fine I am sure the PSU I have is more than capable of running this card I ran 2 6970's in xfire on the same PSU and motherboard with no problems.
I am running it on an 40"BRAVIA LCD and am using the DVI to HDMI converter that came with the GTX590 and I have also tried it with an DVI to HDMI cable also.
The system is stable under the latest NVIDIA drivers but the display drivers aren't recognized under device manager and the screen resolution is still stuck in the safe mode size, they are shown up as having the same "error 43" and I still can't get access to the NVIDIA control panel.
I strongly believe this is a driver issue or an issue relating to software within windows. To give you a rundown on several things that I have tried to isolate or fix the issue with is in a list here:
1. Installed every different version of drivers on an fresh install of windows7 including the latest Beta drivers
2. Tried to run the GTX590 on another machine and it runs using windows7
3. Run different graphics card setup using the same PSU RAM and mb on windows7 no problems.
4. Run the gfx card on only 1 gpu no change.
5. Last step I will take is to install Windows7 without the SP1 as I have read elsewhere that similar problems have been fixed by doing this if that don't work might just sell my soul to the devil n see if he can fix it lol.

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
I have tried these:
1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
2. I tried putting back my old 2.5" and nothing but black screen.
Thoughts and suggestions?
Solved!
Go to Solution.

Hi Autoexit173,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
As you have mentioned that the system not booting, please try to remove the RAM and turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
Click here for the steps to remove the RAM and refer page number 40.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

[SOLVED] Black screen after GRUB

Hello everyone
I was setting up a machine with E17 and was trying various DM's since none seemed to work. After attempting to use LightDM, I get a black screen after GRUB. I was trying to read the various logs at /var/log/ but I cannot understand them properly. I tried reinstalling entrance and LightDM with no luck. I even tried editing grub's entry appending '1' or 's' and still no dice. Any help would be appreciated.
Last edited by Linoman (2014-01-20 09:22:33)

Hi tnx for both answers.
I missed something important in Xorg.log. As you can see, fbdev and modesetting aren't loading as usual. I didn't check grub stuff, I don't think it's related, since loading in level 3 (text mode) I get a black screen but I can login as root and turn off the computer blindlessly.
[ 2.969] (II) LoadModule: "modesetting"
[ 2.969] (WW) Warning, couldn't open module modesetting
[ 2.969] (II) UnloadModule: "modesetting"
[ 2.969] (II) Unloading modesetting
[ 2.970] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 2.970] (II) LoadModule: "fbdev"
[ 2.970] (WW) Warning, couldn't open module fbdev
[ 2.970] (II) UnloadModule: "fbdev"
[ 2.970] (II) Unloading fbdev
[ 2.970] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 2.970] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 2.970] (II) VESA: driver for VESA chipsets: vesa
[ 2.970] (++) using VT number 7
[ 2.974] (WW) Falling back to old probe method for vesa
javex wrote:Post the content of the following files:
Also does disabling LightDM again help resolve the issue, i.e. can you get it to work without LightDM?
No, I can't get it to work changing DM's. I'm not sure if I pacman -Syu before changing DM's another time. Maybe it wasn't LightDM's fault afterall.
Spider.007 wrote:Additionally; try booting without the 'quiet' entry that is in the kernel line by default; and disable https://wiki.archlinux.org/index.php/Ke … de_Setting too
Thanks for pointing out that. I didn't knew I had it on.
Last edited by Linoman (2014-01-11 21:34:08)

Black Screen after logging in locally to Windows 7 that previously had an open RDP session.

Here is what happens. I leave my home computer on (running Windows 7 Ultimate) and sometimes I will remote to it from another location (work, friends house, or wherever). When I return home, I will go to login, the screen then goes blank (no mouse cursor
or anything). I have to do a cold boot to get back into Windows. This only happens if I ever RDP into it sometimes during the day. It seems random. I've tried logging off the RDP session, just closing it without logging off, nothing seems to be the answer
in that regard. It seems very random at times. I'll go a week and I can come home and it will login fine with no problems. Then the next week it starts giving me the black screen after I come home and login locally. I've seen several black screen issues here,
but usually they are getting it before logon. Anyone have a clue what might be causing this?

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
As the question is off topic here, I am moving it to the
Where is the Forum... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

WINDOWS 8 BLACK SCREEN AFTER LOGIN PROBLEM

Please help me i have a problem with my computer it goes black screen after i login
my desktop is hp pavilion a5055d my os is windows 8 i dont know what the problem
i have a ati radeon xpress 1100 for videocard ..
I tried to restart many times.

Hi,
Did this issue occur before?
Try to logon with Safe Mode to see if the same issue occurs.
Furthermore, you can try to update BIOS for your machine?
You can refer these article to update BIOS if your machine cannot boot:
http://www.ehow.com/how_7356859_update-bios-windows-won_t-boot.html
http://www.wikihow.com/Fix-a-PC-Which-Won't-Boot
Hope that helps.
Leo Huang
TechNet Community Support

Black Screen After Upgrading to Windows 8

Hi
I'm experiencing a black screen after upgrading a Dell N5050 B890 to Windows 8.
Tried to refresh the installation but the problem persited. re-installed the Windows 8, the machine logged in successfully but the problem arose again after reboot.
Urgent assistance needed

This problem is solved...
I guess the problem is concerned with the display module controller in the BIOS which is having a slight compatibility issue with windows 8.
This issue is solved by updating the BIOS of your Laptop/PC to the latest version. You can download the latest BIOS from the website of the Laptop company/Motherboard Company.
But for updating the BIOS, you have to start your computer/Laptop for at least one time in Normal Mode. So here are the steps to do so...
1) Boot the Laptop/PC.
2) After the boot screen (The Circle Animation & Windows 8 logo), you will be presented by the lovely & awesome blank screen.
3) Wait for 1 minute so that drivers load into the memory.
4) Press the Power button of your laptop/PC for only a moment (Just Press and release it quickly. Don't hold. We don't want to shut down).
5) This will force the laptop/PC to go into Sleep mode.
6) When the laptop/PC goes in sleep, the laptop fan & other sounds will stop.
7) After 4-5 seconds, press the power button again & release it quickly.
8) Voilllaa!!! The laptop/PC starts & you are presented with the lock screen. Now..... Login! What are you waiting for! :P
This is not the permanent solution. It just lets you start you Laptop/PC.
After updating the BIOS, I strongly suggest that you must download the latest graphics driver for your Computer/Laptop to avoid any further issues.

IOS adhoc displays black screen after launch

Hi,
my iOS application displays black screen after slash screen.nothing happens and couldn't see any proper errors on debug utility.
I can build adhoc using flash builder and it's works fine but problem occurs when I create ipa using dumped config file on command line(ant)
I'm using flex sdk 4.6 and AirSDK 15.0(overladed) .my application includes few native extensions.
mxmlc
mxmlc -load-config app-config.xml src/mobapp.mxml -output myapp.swf
adt
<target name="build-release-adhoc-package-ipa">
    <echo>::building captive-runtime release-adhoc ipa..</echo>
    <exec executable="${FLEX_BIN}/adt" failonerror="true">
        <arg line="-package" />
        <arg line="-target ipa-ad-hoc" />
        <arg line="-storetype pkcs12" />
        <arg line="-keystore ${provision.dir}/release-adhoc.p12" />
        <arg line="-storepass 12345" />
        <arg line="-provisioning-profile ${provision.dir}/release_adhoc.mobileprovision" />
        <arg line="${adhoc.dir}/ios-adhoc.ipa" />
        <arg line="${src}/mobapp-app.xml" />
        <arg line="myapp.swf" />
        <arg line="${icon.dir}/applicationIcon16.png" />
        <arg line="${icon.dir}/applicationIcon32.png" />
        <arg line="${icon.dir}/applicationIcon36.png" />
        <arg line="${icon.dir}/applicationIcon48.png" />
        <arg line="${icon.dir}/applicationIcon57.png" />
        <arg line="${icon.dir}/applicationIcon72.png" />
        <arg line="${icon.dir}/applicationIcon76.png" />
        <arg line="${icon.dir}/applicationIcon114.png" />
        <arg line="${icon.dir}/applicationIcon120.png" />
        <arg line="${icon.dir}/applicationIcon128.png" />
        <arg line="${icon.dir}/applicationIcon152.png" />
        <arg line="${base.dir}/[email protected]" />
        <arg line="-extdir ${src}/ane" />
        <arg line="-platformsdk /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPh oneOS.sdk" />
    </exec>
    </target>
please help.

Hi,
my iOS application displays black screen after slash screen.nothing happens and couldn't see any proper errors on debug utility.
I can build adhoc using flash builder and it's works fine but problem occurs when I create ipa using dumped config file on command line(ant)
I'm using flex sdk 4.6 and AirSDK 15.0(overladed) .my application includes few native extensions.
mxmlc
mxmlc -load-config app-config.xml src/mobapp.mxml -output myapp.swf
adt
<target name="build-release-adhoc-package-ipa">
    <echo>::building captive-runtime release-adhoc ipa..</echo>
    <exec executable="${FLEX_BIN}/adt" failonerror="true">
        <arg line="-package" />
        <arg line="-target ipa-ad-hoc" />
        <arg line="-storetype pkcs12" />
        <arg line="-keystore ${provision.dir}/release-adhoc.p12" />
        <arg line="-storepass 12345" />
        <arg line="-provisioning-profile ${provision.dir}/release_adhoc.mobileprovision" />
        <arg line="${adhoc.dir}/ios-adhoc.ipa" />
        <arg line="${src}/mobapp-app.xml" />
        <arg line="myapp.swf" />
        <arg line="${icon.dir}/applicationIcon16.png" />
        <arg line="${icon.dir}/applicationIcon32.png" />
        <arg line="${icon.dir}/applicationIcon36.png" />
        <arg line="${icon.dir}/applicationIcon48.png" />
        <arg line="${icon.dir}/applicationIcon57.png" />
        <arg line="${icon.dir}/applicationIcon72.png" />
        <arg line="${icon.dir}/applicationIcon76.png" />
        <arg line="${icon.dir}/applicationIcon114.png" />
        <arg line="${icon.dir}/applicationIcon120.png" />
        <arg line="${icon.dir}/applicationIcon128.png" />
        <arg line="${icon.dir}/applicationIcon152.png" />
        <arg line="${base.dir}/[email protected]" />
        <arg line="-extdir ${src}/ane" />
        <arg line="-platformsdk /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPh oneOS.sdk" />
    </exec>
    </target>
please help.

Playback gives black screen after a few times

Similar Messages

Maybe you are looking for