Playback has frozen in Premiere Pro CS6, it started when I added some after effects compositions to

Playback has frozen in Premiere Pro CS6. I am running a 1080p timeline and it appeared to start when I added some after effects renders to my timeline. The playback head still runs through the timeline and audio plays normally but the video completely stops and cannot be viewed in real time.
I have plenty of memory and a very good graphics card running 64Bit Windows 7.

Red, yellow, and green render bars and what they mean
http://blogs.adobe.com/premierepro/2011/02/red-yellow-and-green-render-bars.html

Similar Messages

Premiere Pro cc 2014 do not import After Effects composition. Inside Premiere Pro CC 2014 is not possible call back After Effects, is not possible to work with After Effects. Thank you

Premiere Pro cc 2014 do not import After Effects composition. Inside Premiere Pro CC 2014 is not possible call back After Effects, is not possible to work with After Effects. Thank you

You haven't given us much to go on here. What exactly are you doing and what exactly happens when you try? Which specific version of each program are you using? (Go to Help>About...)
On a side note, a simple, brief thread title is all that's needed. Something like "After Effects Issue" would be fine. You don't need the full question there.

.mov files no video but has sound in premiere pro cs6

I know this isn't adobe. However, all of my .mov files play with no video in quicktime, premiere pro cs6, and sony vegas 9. I've looked into the missing codec, and quicktime brings me to the general page with multiple codecs listed. This happens with two different types of cameras. Both HD. I have Windows 7. Does anyone know why the files won't play video? Thanks.

jon - no idea why you were such a snarky SOB in your reply. person was just asking for some help. obviously stuck and could use some advise. you could have chosen to ask a few clarifying questions to see if additional info could be gleaned. instead you CHOSE to be mean. NOT COOL. if you hate being a support person, dont offer your help and dont go online. otherwise, change your attitude.
If you feel my comments were inappropriate, then feel free to report my post as such. If you feel the information was incorrect, then please provide what you feel to be more correct information. The object of my comments was to 1) point out that no accurate solution was possible without amplifying information, 2) inform the individual why more information was needed, and 3) describe at least three methods for getting the required information. It was not my intent to be either "mean" or "cool" but rather to teach the individual how to analyize their video content in order to become more self-sufficient in the future. Perhaps if you concentrated more on the content of my response than on your emotional interpretations of what you think was implied, you might find something of value.
My question for you is,"Did you actually create a new profile tonight to hide your normal identity while you berate my response?"
for lordrebeccasama - there are people out there that would like to help. I would suggest you try to get answers to some of these questions and post - people may have some ideas: Does this problem occur with all MOV files or just certain ones. if just certain ones, can you ell which camera or source produced the file? can you see if the files can be played on other machines (like another PC or a MAC)? if you can, try to get into the properties of the MOV file (the container) and see if you can tell how it was encoded. good luck - and on behalf of all people that actually like to help, i apologize on behalf of jon.
Since you have essentially asked for the same information I did, albeit in a more indirect manner, I don't feel any apology is needed on my behalf.

Premiere Pro cs6 keeps crashing when im editing or rendering a video

When I am on Adobe Premiere Pro cs6 every 10-20 mins it crashes when im editing a video, it crashes more often when im rendering it (export media, ctrl+M). I dont mind when it crashes while im editing because i save the file regularly but when im rendering its a problem, it probably because the file is too big as i use dxtory to record skyrim but this is an expensive product so it should be able to render. I encode the file once ive chosen the format and stuff for the video and it says finish rendering in 50 mins or so and when it gets to like 4% rendering it says not responding. It then troubleshoots but then says 'close program'. this is very frustrating, please can someone help me. I've looked through the forums but i dont uinderstand many of the solutions as im not that good at computers
here are my computer specs:
Rating: 6.6 windows experience index
processor: AMD Phenom(tm) II X6 1035T Processor (6 CPUs 2.60GHz)
Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7601)
Ram: 6144mb ram (6GB)
DirectX Version: DirectX 11
Device
Name: NVIDIA GeForce GT 230
Manufacturer: NVIDIA
Chip Type: GeForce GT 230
DAC Type :integrated RAMDAC#
Approx. Total Memory: 4072 MB

>GeForce GT 230
What is your nVidia driver version?
There have been reports of problems with some older cards and some driver versions
http://forums.adobe.com/thread/1084197

PP CS6 to AE CC 2014 (Replace with After Effects Composition)?

Hey guys, been a CS6 user for a little while now and don't require the complete CC subscription but really like working with AE. So I subscribed to Single App membership CC AE 2014. I launch PP CS6 chop some clips and send them to AE via Replace with After Effects Composition and in turn this dialog pops up stating "The importer reported a generic error" and them are the brakes. I uninstalled AE CS6 because when replacing a clip with a AE Comp AE CS6 launches. Are these two programmes not talking to each other? Like crippled.

Hey thanks cc_merchant, that doesn't come as a surprise to me, I guess I'm just a little disappointed by this on two levels, one this not having been mentioned or it is mentioned but well hidden and secondly that it's purposely crippled. That's business.

Playback and render issues Premiere Pro CS6 on Mac

I have been having very "skippy" and sluggish issues when it comes to playback and editing. I have deleted all the old render files from my project and my hard drive, but nothing seems to work. Can someone please help me? I'm not sure if it is a space issue or what, but I haven't had much of these problems before. I know it's not a sequence settings issue, so I am very confused. My footage all comes from a Maxell P2 Eseries card and my computer specs are:
iMac
Processor 2.5 GHz Intel Core i5
Memory 16 GB 1333 MHz DDR3

http://helpx.adobe.com/premiere-pro/kb/cant-capture-dv-hdv-video.html
Also, Go to http://forums.adobe.com/community/premiere and, in the area just under Ask a Question, type in
maverick
or
mavericks
or
10.9
You may now read previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question

Adobe Premiere Pro CS6 constantly crashes when importing video files

I have not used Premiere Pro in a while, but recently when I tried to import video files (from .m4v, .mp4 and .mov) the program stops working, the "importing" window doesn't progress and I get the rainbow wheel of "death".
I read some other posts where some are having similar situations and some users suggested moving the file from an external hard-drive to an internal one (I have a 1TB external hard-drive) but that didn't do squat either.
Once the program is frozen I'm forced to "force quit" the program.
Does anyone know what I can do?

I am having the same problems, but my program locks up when trying to playback .MTS files that are shot natively on my GH2. It will not render or export anything & when you try and scrub or playback footage it gets the spinning wheel of death. To finish my last project, I had to transcode all the .MTS files to .MP4 files and it worked fine. Also, anytime I shut down PP, I have to force quit the program for it to shut down. Here are the detailed info you asked for...
What version of Premiere Pro? Include the minor version number (e.g., Premiere Pro CS5.5 with the 5.5.2 update).Premiere Pro CC (trial) 7.1.0 - 141 (because I uninstalled CS5, 5.5, & 6 thinking they may be the problems.
Have you installed the recent updates? (If not, you should. They fix a lot of problems.) YES, up to date
What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac”. OSX 10.9
What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime”..MTS files from a GH2
If you are getting error message(s), what is the full text of the error message(s)?It tells me that it is an unknown error (I do not have a copy of the original error message)
What were you doing when the problem occurred?Trying to playback (wheel of death), Trying to Render and export (starts rendering, then just sits there and then gives the unknown error)
Has this ever worked before?I have worked on this projects for a few months, then just out of the blue it started with these problems about 1 week ago.
What other software are you running?none
Do you have any third-party effects or codecs installed?some from Video Copilot and Plural eyes 3 (NOT used on this project)
Tell us about your computer hardware. Be especially certain to tell us about third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU).
iMac 27in Mid 2011 3.4 Intel Core i7 16 GB 1333 Mhz DDR3 AMD Radeon HD6970M 2048 MB OSX 10/9 (13A603)
No external devices, except a external hard drive. I changed from a Thunderbolt Seagate 1TB (single 7200 RPM) to a Drobo Mini 2 TB RAID 5 in the MIDDLE of this problem, thinking the issue was the drive was to slow to keep up - NOT the case… it still happens with the new drive.
Are you using Mercury Playback Engine GPU Acceleration?I am not completely sure to be honest - I believe it is the factory settings.
Does the problem only happen with your final output, with previews, or both?both!

Premiere Pro CS6 Quits unexpectedly when loading Images or Video into viewer.

I have been using CS6 since May of 2013. I currently operate on a Mac. I have never had any issues. I used it one day last week, then all of a sudden a few days ago is when the issues started. Premiere Pro will start normally (New or Exsisting Project), I can even import media. But I am not able to load Images or Videos into the viewer, nor am I able to just drag and drop on the timeline. Audio seems to drag onto the timeline just fine.
I have tried many things to trouble shoot the issue such as:
1. Starting a new Project. (Thought maybe something in the existing project was corrupt.)
2. Opening an older project that I knew worked fine in the past. (Thinking new projects were also corrupt.)
3. Transcoding the video Files. (Thinking the media was corrupt.)
4. Restarting the computer.
5. Holding "Shift" while starting Premiere Pro.
I am not getting any error codes, just a Dialog box that says, "Sorry, a serious error has occurred that requires Adobe Premiere Pro to shut down. We will attempt to save your current project."
Thanks for your help.

Hi Luther,
Welcome to Adobe Forums.
Which version of Mac OS are you using?
Try to repair the preferences by opening the finder window click on go and
choose go to folder and type ~/library and press enter. Then go to Preferences>Adobe
and rename the 6.0 folder to 6.0.old. If you are using Mavericks ( OS 10.9) try to give permissions to the
Adobe folder as well.
Please reply in case the issue persists.
Thanks

What can I do to stop Adobe Premiere Pro CS6 from crashing when exporting?

Regardless of whether I have a new project file or an existing one, edits or no edits, whenever I click export, Premiere Pro simply crashes. Same for Media Encoder - can't even open that one. I have all of the latest CS6 updates installed, the computer is brand new as of two weeks ago - OSX 10.9.1, NVIDIA GeForce GT 650M 1024 MB. The only way I've been able to export is through a backdoor: I use the dynamic link in After Effects, then render out my sequences there. Help?

OSX Crash http://helpx.adobe.com/creative-cloud/kb/ame-premiere-crash-launch-export.html

Premiere Pro CS6 keeps crashing when exporting h.264 (NEED HELP ASAP!)

Alright, so I have a video that I've probably rendered around 30 times now and it ALWAYS ends up either freezing up, and then Premiere stops working, or it just stops working.
I have a YouTube channel and I'm going away for 2 days tomorrow and I really need to get my videos up online, but I just can't render them! Does anyone know how to fix this? I really need help ASAP!
Here are my export settings.
http://imgur.com/ZgAuI4a,OMz4FEd,B8gjHws

While there are "some" Adobe employees who read/post here, this is primarily a user to user forum... NOT Adobe support
You are simply going to have to wait for someone to read your message, and look at your settings, and reply... IF that person has an idea (20 minutes is really not much time)
While you wait for someone to reply with ideas, some reading about your freezing problem... and questions to help people help you
1st, what are you editing?
Codec & Format information, with 2 links inside to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
2nd, you need to give LOTS more information about your computer
-PPro Information FAQ http://forums.adobe.com/message/4200840
3rd, What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
4th, do you have Dual video adapters?
Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

Premiere Pro CS6 wont start

ive tried asking for help here: http://forums.adobe.com/message/4935365#4935365
but no luck so far. livechat were no help, and tech support phone in Australia, didnt answer the phone then the line dropped.
Premiere Pro installed via the download manager (creative cloud), when it launches the splash comes up and runs through the list of files, then the window opens for a split second, and immediately quits. No error messages.
Any ideas, and how can I get through to a tech support person, do Adobe even offer this?
Please help, Im getting desperate now, its been all day and I'm back at work tomorrow. how can I get an answer?
thanks
A

More computer information might help http://forums.adobe.com/message/4200840

Premiere Pro CS6 won't play imported files even after changing format, etc?

Camera: Canon Legria HFM41
Video file format: MTS (1920 x 1080)
For the past few days I've been trying to understand why my video files won't play in Premiere, I'll import them, and when I press play the audio will work, but the video will play smoothly for only a few seconds then stop, skipping frames/slowing the speed of the video - I've read a lot of these forums on similar issues, then I tried converting the format to avi/mp4 and they still won't play smoothly when importing to Premiere Pro.. Does anyone know what I may be doing wrong/how to solve this.. Thank you!
Shanna

More information needed for someone to help... click these links and provide the
requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
-http://forums.adobe.com/thread/419406

Premiere Pro CS6 opening slow when connected to slow network.

I recently setup a user with his computer running behind a VPN router so that he could work from home. The VPN router is used to give him access to local resources.
A strange thing started to happen with Premiere where it would be very slow to open. Either it hangs on the splash screen for a few seconds to a few minutes or the splash screen loads normally but when the program opens, it is just white for a few minutes until it finally opens. If I try to click on the program Windows tells me that the program is not responding. Being that the premiere was working fine before putting the PC behind the VPN router, I feel like it had to be a network thing. I had the user momentarily unplug the Ethernet cable from the router and Premiere loaded up quick like it normally does. So when Premiere opens, it must be trying to access some local resources.
The problem is I cannot figure out what that is. I went through all of the preferences and nothing is set to use a network resource. Media cache is set to us a local SSD. What else could Premeire be trying to access to launch?

Premiere communicates with Adobe as it opens. I'm assuming it is verifying that you have an active account/aren't pirating the software. On my computer the maximum bandwidth usage is 1Mbps (that's bit not byte), so unless your VPN is incredibly slow, this probably isn't the issue. Maybe there's some firewall interaction that is limiting Premiere's ability to talk to Adobe as it launches?

Playback and encoding problems premiere pro cs6 and lightroom4

BIG BLOCKY ARTIFACTS
the problem ocours in all videos(every 1sec) i recorded in my dslr d5100. 1080p 30fps .mov files. in media player classic it play flawless all videos as seen in my pics.
how to fix it? i tried unstalling codecs and nothing. will try installing quicktime. i think its codecs or maybe hardware.
my pc is i5-2500k gpu gtx560 8gb ram.
please help me. thanks

[URL=http://www.4shared.com/video/94VvVdUM/0511_videogasometro_002.html][IMG]http://dc584.4shared.com/img/94VvVdUM/0.4382360316505566/0511_videogasometro_002.MOV[/IMG][/URL]
its 280mb, original. worst artifacts at 13secs.

Premiere Pro CC 2014 Not Passing Cross Dissolve to After Effects

I know this was a bug a few years ago with CS5 and has been fixed since CS5.5. But I appear to be having the same problem after upgrading to CC 2014.
When I import a Premiere sequence into AE the cross dissolve information is not being read by AE. Instead I get a black layer below my footage layer, the length of my cross dissolve saying cross dissolve.
Here's a screen shot of how the project looks once imported into Premiere.
Anyone else experiencing this?

Did you find any solution for this? Having the same problem here...

Playback has frozen in Premiere Pro CS6, it started when I added some after effects compositions to

Similar Messages

Maybe you are looking for