Playback is intermittent from my iPad when going through the stereo

This happens even when I directly connect to the receiver (Denon 1713) via USB port. It does not happen when playing music through the iPad speaker, and it does not happen when playing other audio, such as streaming netflix or Pandora. It is definitely an issue of communication between the iPad and the receiver. Any thoughts?

From pp. 78-79 of the iPad User Manual:

Similar Messages

When going through the download process with social monkee and getting to the point of adding it to firefox I get the following message: 'Social Monkee could not be installed because firefox cannot modify the needed file'. How can this be fixed?

When going through the download process with social monkee and getting to the point of adding it to firefox I get the following message: 'Social Monkee could not be installed because firefox cannot modify the needed file'. How can this be fixed?

That is usually caused by a missing unpack directive (<em:unpack>true</em:unpack>) in the file install.rdf of that extension.
See https://developer.mozilla.org/En/Updating_extensions_for_Firefox_4.0#XPI_unpacking
-----

My iphone 5 is in disabled status but when going through the recovery process it asks for the SIM pin but I cannot access the screen as the phone wont connect to the activation server not the screen to unlock the SIM. What do I do?

My iphone 5 is in disabled status but when going through the recovery process it asks for the SIM pin but I cannot access the screen as the phone wont connect to the activation server not the screen to unlock the SIM. What do I do?

That's usually a symptom of a phone that was hacked or jailbroken to unlock it.

RoboHelp Server 8 Not Displaying All TOCs When Going through the Engine

Hello,
We recently upgraded from X5 to X8 and imported and converted our X5 project to X8 without any problems. After our conversion, we are having TOC issues.
Here is our issue. Not all of our TOCs are displaying when we veiw our project through the engine, but if we view the project directly (without) going through the engine all of our TOCs display correctly. I've tried creating a new TOC and checking the Copy existing Table of Content box and deleting the old TOC and that did not work. I removed the following characters in the TOC (&, <, >,) and that did not work. I also tried deleting a book with topic pages within the book and re-creating the book and adding the topic pages in the book and no solution. It seems like i've tried everything to resolve our issue and nothing has worked so far.Our books have topic pages linked to it.
I've searched the forums and i have not seen anyone else with the same issue. Any help would be greatly appreciated.
Thanks

Hi Ian,
Just zip them up and send them to me in a private message.
Tulika.

RoboHelp Server 8 Displays Blank Page When Going through the Engine

Here is my issue.
I have 6 projects between 2 areas on our RoboHelp Server 8. I have
never had any problems publishing to the server, our IT department had no problems setting up the server including
installing Tomcat. We've changed the port so it would run on the default http port 80. Everything was running smoothly until this morning. When we go to the link that is used to run through the engine (i.e. http://server name:port/robohelp/server?prj=project name&area=areaname), instead of the redirecting page that we normally get, we get a blank white page that shows done in the status bar. Our IT department has tried to restart the server, did not fix the problem, they tried to restart the services (i.e. Tomcat and the RoboEngine), did not fix the problem. I have tried to connect to the server through the RoboHelp development interface and I get an Connection to Server Failed error. I have checked the publishing interface for Webhelp Pro ,which is what we use and all the setting are correct. When I try and refresh the area I get the Unable to get area list from server. We can get to the projects as if what we are using Webhelp. We would use regular Webhelp but that does us no good because then there is no reporting features because it is not running through the engine.
When I go though the Web Admin Interface and try to look at the project section we get an Server is refreshing project data, try again later. This is the same error we have received all day. I'm now stuck and don't know what to do or try. Between my IT dept and myself we tried everything we can think of.
Just another tidbit so it can be ruled out. I have applied the patch to my copy of RoboHelp 8.0.2 patch. And since I'm the only developer right now, that should not be the issue.
I have not tried to delete the project form the server, because
a. I can't see them in the projects pane so I can't delete them and
b. I cannot connect to the server to re-publish them.
Any advise in the matter would be greatly appreciated.
Thanks,
Ian

Hi Ian,
Just zip them up and send them to me in a private message.
Tulika.

I can't use airplay from iphone/ipad when I update the system

It has been showed that "an error occurred loading this content, try again later".
how can i fix that?
and why apple TV can't output the sound to the AirPort Express on wifi? only airpay？？？？
so stupid...

Actually, there is a solution, and it sounds to go against what you want until you realize how well it works.
Seperate Apple IDs is the solution, but you can granularly sign into different things with different IDs. Now, I'm in the exact same situation as you and saw the exact same problem. Here was our solution:
1) Create new Apple IDs for everyone that didn't already have one. This meant my wife and daughter needed new IDs.
2) Go into Settings -> Message and select "Receive At..."
3) Change the Apple ID in iMessage on a per-device basis to the new ID for who ever owns that device. For example, the new ID for my wife went on her phone, same with my daughter.
Apple IDs are free, and you don't have to change the ID on every part of your phone. For example, we still have the generic family ID on iCloud and the store, but we have our own unique ones signed in on iMessage and Game Center. From what I can tell, this is the best of both worlds.

HT1212 I am trying to restore my ipad (disabled and connect to itunes), but when going through the steps, it's asking me for my passcode. I can't put that in because it's disbled. This is the WORST product and product instructions I have ever dealt with

My ipad is disabled and it tells me to connect to itunes. However, once I've connected to iTUNES, it ask me for my passcode and of course, I can't put that in because my ipad is disabled. I am ready to throw this iPad out the window. Wll never buy another one.

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost

IPad2 still showing iTunes even when going through the restore iPad button

Even after clicking on restore iPad I am still getting the following:
The iPad "iPad" could not be restored. An unknown error has occurred (1).
Any help would be appreciated.

http://support.apple.com/kb/TS3694#1
https://discussions.apple.com/thread/3393959?tstart=0
more
https://www.google.dk/webhp?sourceid=chrome-instant&ion=1&espv=2&es_th=1&ie=UTF- 8#q=ipad%20restore%20error%201

Macbook Pro Retina (July 2014) will not register TOUCH events when going through the AIR DEBUG LAUNCHER for MOBILE

I recently purchased a MACBOOK PRO with a retina screen and have started to transition to it as a primary work computer.
I have a game that is built on another Macbook Pro (non retina) that works fine in the AIR debug launcher for mobile but when I launch it from the RETINA device, the touch events seem to not register correctly.
Has anyone else experienced this issue?

To further clarify, it appears the touch simulator is cutting everything in half, maybe because of the pixel density?

How to read emails in ipad without going through the same emails in macbook

As above... please advise...

Set your email account up as IMAP on both iPad and MacBook. Then all mails read on one device will be shown as read on the others.

HT2729 I have limited space on my new ipad. How can I limit the number of songs from my itunes on my imac from going to my ipad when I connect the two?

I have limited space on my new ipad. How can I limit the number of songs from my itunes on my imac from going to my ipad when I connect the two?

you can do this by keeping the external hard drive connected and doing the following
-hold shift key down on computer while opening iTunes and a prompt will appear to choose a library
-select choose library, iTunes should bring up your explorer windows where you can search for the external HD
-after you find the external HD find the iTunes folder you just copied to it
-after opening the iTunes folder look for the file that says iTunes library.itl or if you can't see that extenstion just look for a document looking thing in the iTunes folder that shows up as a database file
-double click the database file and boom iTunes should load your library without having to copy it to the computer
PS: do make sure that if you are going to do it this way, make sure that the external HD is connected at all times, because if you don't then you will get exclamation marks next to your iTunes songs
double PS: if you are unsure how to find out if the iTunes library file is a database file just right click it and choose properties and under the type it should say database file
hope this helps:)

I have one apple ID for both my Iphone 4S and Ipad. My Ipad was stolen from me and when I checked the iCloud, it can only locate the Iphone 4S. How can I locate the Ipad device?

I have one apple ID for both my Iphone 4S and Ipad. My Ipad was stolen from me and when I checked the iCloud, it can only locate the Iphone 4S. How can I locate the Ipad device?

Welcome to the Apple Community.
You can only locate your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

How can I log onto iCloud from my iPad when the option is in grey and therefore not available

How can I log onto iCloud from my iPad when the option is in grey and therefore not available. I deleted my account as it was showing up with an old Id ( I'd changed my email) but now I've done that it won't give me the option of logging back on. Do I have to do this on another device Or computer linked to iTunes first?
THanks

Hi Kate, have you perchance enabled restrictions on your device. (Settings > General > Restrictions)

From my Ipad, when I am in Facebook, I can not hear the videos posted to my FB page...Sounds works on all other apps just not my videos on my FB page.

From my Ipad, when I am in Facebook, I can not hear the videos posted to my FB page...Sounds works on all other apps just not my videos on my FB page.

Homesharing has issues that have not been fixed over several versions of itunes and ios.
Only kind of fix is go back through your library and retag it.

My ipad is flat and when I plug it in to charge it just repeatedly turns on and then turns off but isn't charging. I tried to plug into itunes but it just goes through the same ritual and can't maintain connection to itunes. What should I do ?

My ipad is flat and when I plug it in to charge it just repeatedly turns on and then turns off but isn't charging. I tried to plug into itunes but it just goes through the same ritual and can't maintain connection to itunes. What should I do ?

1. Reset iPad
2. Try another wall socket
3. Try another cable (make sure it's an original Apple cable)
4. Try another charger (make sure it's an original Apple charger)
5. Clean Lightning port with compress air or new paint brush

Playback is intermittent from my iPad when going through the stereo

Similar Messages

Maybe you are looking for