Playback issues when combining 2 Quicktime movies

Hello All:
I have been processing a short 4 second ID video to combine and place at the head of various QT movies as branding.
While, most have continued to add (copy/paste) these ID movies and play them into the following movie content several continue to only present a WHITE blank leader of 4 seconds, then play the movie content fine.
I have Perian installed, running QT Pro 7.6.4 on 10.4.11
have re-exported my ID video and pasted in again at the head of these certain videos and still not playing.
have gone into Movie inspector and can see the track, but it remains UNCHECKED and won't accept enabling......hmmm
solutions appreciated!
Lux

hey again:
I'm pasting these short ID clips into existing 264 MOV files....some work, some don't play the head
but show that disabled video button in the Inspector menu
I am using the EXPORT function to save the final output clips, as it offers QT selections on Stereo or Mono sound and internet header....
I will try the whole process on a test file and SAVE AS (self contained?) in Quicktime and see what happens
thanks again
Lux

Similar Messages

  • Green screen when playing any Quicktime movie within a browser

    With all the latest Apple updates installed, I now see only a blank green screen when playing any Quicktime movie within any browser, Safari or Firefox. Audio is fine, but the video shows just a key frame initially then goes blank green when it starts playing. If I download the movie, it will play fine in Quicktime Player. This applies to any Quicktime movie, on the Apple site or any other site. But, streaming movies that are .wmv files play fine, thru the Flip4Mac plug-in. On my older G4 Powerbook, with 10.5.7 and the latest Safari and Quicktime. there are no problems. And until recently the Intel Macbook was fine, too. But something that was installed has messed up Quicktime in some fashion so it no longer plays streaming Quicktime movies in a browser. Do I need to remove and re-install some component? Downgrade to an earlier version? I recently installed CS4 and the latest Canon digital imaging software that comes with their cameras. Might any of these have messed up how Quicktime works? -- Alan

    Hi,
    I logged out then back in a Guest User with minimal access, ran Safari and streaming movies still would NOT play in browsers.
    I then logged back in as me, with Admin access, and ran Disk Utility to first: Verify the Disk -- all was OK.
    Then did a Permissions repair. And these were the permissions needing repair, below: A lot of them! And many pertaining to Quicktime. Unfortunately, doing this made no effect. Still no improvement. And running the Permissions Repair again produced the identical list of repairs. It says they have been repaired but not so, apparently.
    I thought this must be the issue. But then I did the same thing with my older G4 Laptop (but also has the latest OS 10.5.7, Safari 4.02 and Quicktime 7.6.2 and other Apple updates, albeit for Powermacs not Intel), and which has minimal applications on it (it serves as a media server for the stereo) and it plays movies fine. But ... doing a Permissions Repair on it produced a similar list and they also would not repair (doing a Repair again a second time produced the same list). Yet it plays movies fine. So I'm stumped.
    a) why are the laptops refusing to repair their permissions?
    b) and might this be the problem on the Intel machine.
    Is the answer removing Safari and installing an earlier version (I have a stand-along installer for v.4) and/or doing the same with Quicktime (I have 7.6).
    Thanks,
    -- Alan
    Repairing permissions for “Macintosh HD”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Permissions differ on "System/Library/Frameworks/CoreVideo.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/AirPort Base Station Agent.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "System/Library/Components/CoreMediaAuthoringPrivateComponents.component/Conten ts/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/CoreMediaAuthoringPrivate.framework/Versions/ A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/AVC.plugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/IIDC.plugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/MPEGAudioDecoder.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/MPEGLayer2AudioEncoder.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/Tundra.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/VDC.plugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/CoreMediaPrivate.framework/Versions/A/CodeRes ources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/QuickTime/QuickTimeComponents.component/Contents/CodeResources" , should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/QuickTimeJava/QuickTimeJava.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/QuickTime/AppleVAH264HW.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/QuickTime/QuickTime3GPP.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/QuickTime/QuickTimeFireWireDV.component/Contents/CodeResources" , should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/QuickTime/QuickTimeH264.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/QuickTime/QuickTimeIIDCDigitizer.component/Contents/CodeResourc es", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/QuickTime/QuickTimeImporters.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/QuickTime/QuickTimeMPEG.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/QuickTime/QuickTimeMPEG4.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/QuickTime/QuickTimeStreaming.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/QuickTime/QuickTimeVR.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "Library/Internet Plug-Ins/QuickTime Plugin.plugin/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Library/Internet Plug-Ins/QuickTime Plugin.webplugin/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "System/Library/Frameworks/QTKit.framework/Versions/A/Resources/QTKitIBPlugin.i bplugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/Spotlight/QuickTime.mdimporter/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "Library/Audio/Plug-Ins/HAL/iSightAudio.plugin/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "System/Library/Frameworks/QuickTime.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "Applications/QuickTime Player.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/AnnotationInspector.propPane/Contents/CodeResources ", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/AudioSettingsInspector.propPane/Contents/CodeResour ces", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/DataRefInspector.propPane/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/HintTrackInspector.propPane/Contents/CodeResources" , should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/NetworkInspector.propPane/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/SettingsInspector.propPane/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/VisualTrackInspector.propPane/Contents/CodeResource s", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTMediaKeys.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTMime.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTTransport.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTPlugIn. prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTRegiste r.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTRegiste r.prefPane/Contents/Resources/QTAbout.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTStreami ng.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTUpdate. prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents/ CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "System/Library/PrivateFrameworks/MobileDevice.framework/Versions/A/AppleMobile DeviceHelper.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/MobileDevice.framework/Versions/A/AppleMobile Sync.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/CodeResourc es", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/BlackAndWhiteEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/CubeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DissolveTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DropletTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FadeThroughBlackTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransitionSmall.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PageFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PushTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/RevealTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/SepiaEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/TwirlTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/WipeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/Components/AudioCodecs.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/CoreAUC.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions repair complete

  • Font changes when exporting as Quicktime movie

    Recently my the font in all my titles has been acting up when after I export to a Quicktime movie. The font that I chose will appear for a few seconds, then it will switch to some default Times New Roman or whatever font for no reason. I'm working with HDV footage. The sequence settings and project settings are all the same and when I export I just use current settings. Even odder is I've been working with this project for months (I did recently reinstall the OS and FC studio, but I'm pretty sure all settings are the same. Any ideas?

    I've had the same problem, my font kept on blowing up when ever I exported. I found it happened whenever I had DVD Studio Pro open at the same time. As long as I exported with the ap closed it would be fine. Not sure if it's the same issue.

  • Audio Sync Issue When Exporting to Quicktime

    Currently using Premiere Pro CS3 3.2 and Quicktime 7.5.5
    When I export to a quicktime .mov, my audio is a few frames out of sync. I've tried downgrading to older versions of quicktime with no success. Everything is completely in sync inside Premiere. If I import my rendered out-of-sync .mov back into Premiere, it magically syncs up fine again. It's the weirdest thing.
    Help!

    Scott:
    There is a workaround.
    I never really found a solid cause/solution, but if you're noticing that you have a couple of white frames at the end of your Quicktime exports, then you're probably suffering the same problem I have. Tech people I have checked with have suggested that the problem may be related to the use of .mp3 sound files (as opposed to .wav) in the Premiere project, but after removing them and replacing them with .wav's the problem persisted.
    I am not technical enough to figure out exactly what's causing the problem, but I think it must have something to do with the Adobe Media Encoder (at least how it works on my computer). From what I've read on the subject, the Media Encoder is Premiere's Achilles's Heel.
    Changing versions of Quicktime did nothing. Others trying to solve this problem have tried exporting their files with every conceivable variation of options and settings in the Adobe Media Encoder with no positive result.
    I'm not the only one with this issue, but searches of the Internet show it to be relatively rare, so it's probably some weird glitch somewhere deep in my system. It's not widely-reported enough for anyone to care about addressing this bug. Of the few people that I've found suffering from this anomaly, none have found a fix.
    But the good news is that I have found a workaround that accomplishes getting a quicktime file out properly that does work for me. I avoid the Adobe Media Encoder completely.
    Step 1: Go to File > Export > Movie, and under Settings > General choose QuickTime, under Video > Compressor choose H.264, then Uncompressed Audio. I have not experimented with other settings, but believe that most of them will do just fine.
    If you examine the quicktime file you've just exported, you'll see it works just swell; i.e. no white frames at the end of the movie and the sound syncs up perfectly. Okay, sounds great---but there's no way to limit the data rate using this method, which means we're stuck with a ridiculously large file.
    The solution is to load the Quicktime file that you've just exported into Quicktime Pro, and now export it using data rate compression / sound compression options to suit your tastes. Bingo!
    The other workaround that I have heard from some is to export your movie (again, avoiding the Adobe Media Encoder, instead using File > Export > Movie) as an Uncompressed AVI, and then compress with QT pro as before. This method didn't work for me, something about not having the proper codec on my system to read the AVI file that was exported, which makes absolutely zero sense but I couldn't find the right codec anywhere, even after identifying it with some super-duper codec identification utility. Go figure!
    So, you'll have to get QT Pro ($30 I think) to use this workaround, but it does work, and that's what counts. I have no idea if there's a QT Pro clone or similar program available out there. Compression/decompression and all that jazz is way beyond me and I'm just happy to be able to get my file finally out there in working condition.
    The only other bit of information I might share with you is that I tried searching the Internet at great length to try and solve this issue, but on the rare occasion I did find someone suffering this problem they were as confounded and frustrated as I was, and no one had a real solution. I continued to search with different search terms and tripped over the clues to this solution when searching for "white frame problem" in relation to Premiere. I even believe that if you search the Abobe forums you may find some posts about it, so if you're inclined to learn more about it, I suggest concentrating your searches with terms that refer to the white frame problem/issue, instead of the terms I used for so long, such as "Premiere Audio Sync Quicktime" and the endless permutations thereof.
    But I'll bet this workaround works for you. Let me know, and if you'd like me to try it on one of your exports on my computer I'd be happy to give it a go.
    I have often wondered if upgrading to CS4 would solve this problem. Are you using CS3 like me? If I could be sure CS4 made this issue vanish I would jump on it, but there just isn't enough information out there to know for sure. I'm inclined to think not.
    Please do let me know if this solution works for you, or if you dig up any new information.
    Thanks!

  • IDVD crashes when encoding imported Quicktime movies

    I have quicktime movie slideshows that I made from iPhoto and posted on the web. The original photos have since been lost in a hard drive crash. I am trying to make a DVD with four of these movies.
    They seem to import OK. They preview OK. But when I burn the DVD (or make a disk image) iDVD crashes after finishing encoding the menus and starting on the slideshow/movie encoding.
    I have tried it with a slideshow exported directly from iPhoto and it works fine. I have tried doing several individual quicktime movies to see if one of them was the culprit, but it still crashes.
    Any suggestions?

    I have quicktime movie slideshows that I made from iPhoto and posted on the web.
    John,
    Welcome to the iDVD forum!
    Any suggestions?
    Whenever a movie is causing some issues, it can be better to export it as full quality DV. You can do this with QT Pro, or by importing it into iMovie. You might lose some QT special effects when you do this, but it might fix whatever glitch is causing problems.
    Then use the iMovie project (or QT Pro exported DV file) in iDVD. Use "save as disk image" to test it out on one movie.
    john b

  • Black frame in embedded quicktime movies in Keynote when exporting to quicktime movie

    I've included some quicktime movies made in Photoshop in my Keynote presentation. When viewing the Keynote presentation from within keynote, the movie play perfectly. However when I export the presentation to a Quicktime move, the first or last frame of the embedded movie is black creating a flicker effect on play.
    The quicktime movies have been embedded as loopable animations using the animation build in function 'Start movie' (after transition with 0 delay).
    Is there a setting that will prevent the black frame on export or is this a bug?

    Trim out the frames in a video editing application, Quicktime, iMovie

  • Good video, poor still picture when export to QuickTime Movie

    I exported my project from Final Cut Pro. Had video and still images. When viewing expoprted video in QuickTime Movie, the video looks good but the still images look distorted (pixulated). The images were ~2.0 MB each. If I make the viewer window for QuickTime Movie small, then images look good. I imported the images from IPhoto and if I open a big windom for viewing the images in IPhoto, they look great, just not in my finished video. Please help. Thanks

    Thank you so much for replying.
    I am really new to Final Cut Pro (Have version 5)
    I am using version 7.7 of QUICK TIME.
    I did not resize the images. I justdragged image from IPhoto and insertd into timeline on Final Cut Pro. How should I resize.
    My video setting is: DV NTSC 48kHz using NTSC (720x480)
    I am going to take a course on Final Cut, but I have so much footage an I wanted to put out some video in the meantime.
    Let me know any suggestions.
    Thank you

  • Audio playback issues when editing quick swipe comp folders.

    My new Imac running ML 10.8.2 is having issues when I want to edit drums tracks that I have grouped together. I recorded the tracks before grouping them. After opening group settings and checking the 'editing (selection)' and 'phase locked audio boxes' I get a spinning beach ball for 10sec. I then expand my take folders to start editing and the computer performance becomes very sluggish and playback stutters and crackles, sometimes turning well recorded drum tracks into a non recognizable mush as various tracks are playing at once. It appears that when I group the tracks together prior to recording and check the necessary boxes that quick swipe editing works fine. When I open old projects on my new iMac that were recorded running Snow Leopard and my old MacBook Pro that use comp editing, it all works smoothly and I can continue editing no problems. So does this mean that these new tracks are somehow corrupted? How can I rescue them? I can't figure it out! I used to be able to set up groups and edit after recording raw on my old setup, surely this is some kind of bug caused from the upgrade to 10.2.8 and/or Logic 9.1.8? It's nothing to do with my Pro 40 interface I don't think as I unplug it and the problem is still audible through built in speakers. Might the recording be corrupt due to connecting Saffire pro 40 via a firewire 800 to thunderbolt adapter?
    I've tried copying/pasting regions into a new project, the regions are all the same length, there are no plugins on the channel strips, the recordings sound fine until I try to edit them, sample rate is consistent (24/48). The main difference to making editing possible seems to be grouping prior to recording or not, which shouldn't make a difference should it? Anyone who can shed a little light on this situation, I will be forever appreciative to! I've got work that needs doing ASAP!
    My setup is:
    iMac, i7 3.1Ghz, 16GB RAM, 1TB HDD, Mountain Lion 10.2.8
    Logic Pro 9.1.8
    Focusrite Saffire Pro 40 (connected to thunderbolt port via thunderbolt==>firewire 800 adapter)

    Anyone?
    This is serioulsy BS, it was all working fine before I went and upgraded everything and now it is worse than prior to upgrading. That's not how it's supposed to work.

  • Final cut pro problem when exporting with quicktime movie

    Hello!
    I must have som help beacuse my musicmovie must be finsihed untill today. I have a movie their i had used filters like colour correction and interlace. When i export with USING QUICKTIME CONVERSION and have
    keyfram 10
    bitrate 6000
    faster encode
    size 1920x1080 HD 16:9
    its not a problem the movie works fine all the way.
    But when i export with QUICKTIME MOVIE it dosent work. Some clips are frozen and some are beeing misscoloured. None of them have interlace. Its the same clips that dosent work everytime i had export with QM. I have tried to replace these clips but the same thing is happening. I dont understand why i cant use quicktime movie but it works with quicktime conversion.
    If you have an e-mail i can send you just the part where this happening.
    Please help me!
    Thanks Gabriel

    I am also expriencing the same error. Tried every solution listed so far:
    1. Switch off background rendering. Trash render files. Don't render. Export.
    2. copying the project within Final Cut Pro into another project
    3. remove the following folder: Library > Application Support > ProApps > MIO > RADPlugins > XDCAMFormat.RADPlug
    Nothing worked. I try to export to Vimeo, YouTube, and master. All error right at 9%
    What's going on?

  • Combining two QuickTime movies

    I figured it out. Sorry for the false alarm.
    I’m trying to add a title slide (w/o music) to a QuickTime movie. I read the help file, but this isn’t working:
    1. Click on the one-slide movie (it’s 5 secs in length), select all, and copy.
    2. Click on the second movie (twenty-some minutes in length), drag the play-head (looks like an inverted triangle atop a small bar) to the beginning of the movie, and then paste.
    3. Save the file as a new movie.
    The new movie is twice as long as movie 2 (40-some minutes), the added stuff is mostly black, and I don’t see the title slide.
    I know this can’t be a difficult task. Would someone please help me with detailed instructions?
    Thanks.
    Greg
    Message was edited by: Greg Gruzalski
    Message was edited by: Greg Gruzalski

    Would someone please help me with detailed instructions?
    Assuming both files are motion clips:
    1) Open each file in its own player
    2) Activate (click on) the 5-second movie clip, press Command-A (to select the entire clip), press Command-C (to copy the data to temporary memory), press Command-N (to create a new empty player), press Command-V to paste the data in memory to the new player.
    3) Activate (click on) the second 20 plus minute player, press Command-A (to select the entire clip), and press Command-C (to copy the data to temporary memory).
    4) Activate (click on) the "new" player, ensuring the "play head" is still at the end of the file, press Command-V (to paste the main clip at the end of your "intro" clip), and use "Save As..." to save the new combined file player to hard drive.
    This is not the most direct method but ensures neither of the original files are modified in case you make a mistake and have to re-do the process. It would appear that in your original work flow you somehow pasted a copy of the main clip to itself.

  • File sizes increase steadily when exporting to Quicktime movies

    I have a series of short (90 seconds or so) little segments in a sequence that are very similar to each other that I've just created one after another in the timeline. There are about 50 of these. They are each made up of still frames (a .PSD Photoshop graphic), overlayed text (Premiere text) and audio - no video. As I create each little segment, I'm exporting them to a Quicktime movie (H.264, 50% compression) and the Range set to Work Area Bar to control what gets exported. Although the resulting Quicktime movies play just fine, the problem is that as I get further and further down the timeline creating these movies the resulting Quicktime movie files get larger and larger. The first movie is around 12MB, the second around 16MB, the third around 21MB, and so on until the 50th one is over 400MB. Again, the movies play just fine, but there's no reason I can see that the 50th one is so gigantic (over 400MB in size) compared to the first one (at around 12MB).
    This is a Windows XP Pro machine with 4GB RAM using Premiere Pro CS3 3.2.0.

    Silly question:
    Are you sliding the Work Area Bar down the timeline to cover the new segments, or are you just extending it?

  • Combine several Quicktime (.mov) files into a DVD with chapters

    I made several Quicktime movie segments (.mov) that I periodically upload to Youtube. Now I have a collection of these short 30 secs to 5 minute videos that I want to incorporate into 1 DVD.
    How do I burn it with chapters to represent each videos?

    I was experimenting on different formats (they are converted to mp4, m4v and mov files before uploading to Youtube) at the beginning before I settled on .mov files. My Macbook only have 80 gigs so I want to preserve all of the clips I did in DVDs before I erase them from the hard drive before importing/starting a new tape. All of them were captured using a Sony Digital 8 camcorder.
    Message was edited by: Nelson Evangelista

  • Sound drop out when exporting to Quicktime movie.

    One track of three sound tracks drops out after a few seconds then reappears a few seconds later when exporting to QT Movie. The project functions perfectly when printing to video. Am using QT 7.1.3 FCE HD 3

    Hi(Bonjour)!
    Try to make an "audio-mixdown" of your final sequence
    in timeline.
    Michel Boissonneault
    Thanks for the info. I managed to overcome the problem initially by copying onto miniDV then re-capturing and exporting the result., but Mix Down is much nicer.
    However, prior to upgrading to FCE-HD, I am fairly certain I have made more complex projects with no problems. Now quite frequently I get a message suggesting I reduce the number of RT tracks, or increase the speed of my computer. Is there something in FCE HD that requires these modifications, or have I a rogue project.
    Does anyone know what is the actual difference between High Medium & Low qualities with Audio & Video?
    Thanks
    Roy

  • Combining 2 quicktime movies into 1

    i'm using qicktime pro 7.5.5 for windows
    I wento to help to follow the instructions to do it, i already did the first step open the movie and i choose edit> select the entire contents of the first movie.
    My problem is in the step #2 choose edit> copy, then open the second movie
    i went to edit and i can not choose copy what i'm doing wrong
    tks

    Here are the steps to create a combined file;
    1. Open File1.mov, select Edit, select Select All.
    2. Select Edit again and select Copy.
    3. Open File2.mov, move the slider control to the right.
    4. Select Edit, and select Paste.
    5. Select File, select Save As, and save the file as File3.mov.
    Maybe you can answer two questions for me.
    Open File3.mov, select Window, and select Show Movie Properties.
    On the top of the Properties window, how many Video Tracks do you have, and how many Sound Tracks do you have? I wonder if you will have the same results as when I do this. Thanks.

  • HTML5 playback issue when playing lots of html5 videos on a single page

    Hi,
    I've got a use case where I need to play 48 to 150 videos per page and number of pages could be from few to thousands. I use html5 for video playback.
    The video tag I use is the below one:
    <video width="20" height="20" autobuffer controls preload="none" ><source src="MY_VIDEO_WITHOUT_EXTENSION"type='video/webm; codecs="vp8,vorbis"'></video>
    I have an Apache http server serving the videos. I store the videos without the extension so I've modified the httpd.conf and added "DefaultType video/mp4" since all videos have been transcoded to mp4 with h.264/mpeg-4 with AAC audio.
    I created a simple html with the above video tag repeated 46 times with each having a different source. The videos are of varying lengths from few minutes to close to an hour. I noticed that I can play the first few videos - around 15 of them. I pause each video before playing the next one. After 15 videos or so, I start seeing the loading icon and the video just won't play no matter how long I wait.
    I used firebug to see what's happening and noticed that it is waiting on the GET request. I see no incoming requests on the apache server logs for those failed videos.
    If i reload the page and play those videos that didn't play earlier they would play without any issue till I reach the number of videos i've selected to play around 15 or so and then the problem starts again. The problem is not with the videos since they play at one time or the other based on what videos I choose to play first. I have no other tabs open that may interfere with this.
    I noticed that I do not have this problem on Google Chrome, all videos play without any issues. So, it looks like it is a firefox issue. I have the latest FF and Chrome btw.
    I added "browser.cache.memory.capacity" property and set it to 1GB but it still didn't help. The memory and CPU usage on the task manager is not significant enough to be the cause of this issue. I have 32GB RAM and 6core CPU. And its not just my desktop, its several other desktops that have this issue.
    Even if I remove the codecs and use type='video/mp4', it doesn't work. I've tried removing autobuffer and it behaves the same.
    Any help is greatly appreciated.
    Thanks
    -G

    Sorry,
    The video tag I use is the below one:
    <video width="20" height="20" autobuffer controls preload="none" ><source src="MY_VIDEO_WITHOUT_EXTENSION"type='video/webm; codecs="vp8,vorbis"'></video>

Maybe you are looking for

  • Can't get my HP LaserJet 2100 seating on Linksys PPSX1 Print server to work

    Hi, I can find and add the printer on Appletalk protocol. I've even downloaded the driver update from HP's site and installed it on my system but still when I print to this printer I get a few blank pages and a page with one or two line of junk on it

  • Freight capitalization for STO process using shipment cost document

    Dear MM experts I have been testing and trying to charge freight to material using transportation module. I know how to do it in simple STO process without SCD (shipment cost document) but I am not able to do it with SCD. I have searched and tried ev

  • APEX 4.0 - AJAX not working with Popup LOV field

    Hello, In the application I have built I have three fields which are 'feeded' by selects via a AJAX construction. All three fields are based on three others, which are PopUp LOV fields. Up to version 3.2 I had no problems: the fields were 'refreshed'

  • Audiobooks not showing up

    I downloaded an audiobook from iTunes on my Verizon iPhone 4 with iOS 7.0.3. I can not find the audiobook in the iTunes library on my phone. It only appears when I perform a Spotlight search on the phone. Additionally, the book does not show up on my

  • Driver program for GI(goods issue) smart form output type WA01

    Hi, i have designed one smart form for GI o/p type WA01 for Tcode MIGO ,but could get any standard driver program becoz in our server the standard program is for the script and not smart form.can anybody help me in finding the standard driver program