Playback jumping to beginning after reaching end of sequence

When playing a sequence, when the cursor gets to the end it now jumps to the very beginning of the sequence. It didn't used to do that, so some sort of option must have been turned on. How can I turn that option off?
Thanks,
John Link

Go to the menu View > Loop Playback to toggle on or off.
MtD

Similar Messages

  • Timeline loops to beginning after reaching end, how do I stop this.

    Hello everyone,
    This is probably a simple fix but I can't find it. I did a search but nothing came up that related to it. My problem is this. When I am playing the timeline and it gets to the end, it restarts at the beginning. I looked in the sequence settings but did not find an option for it. Its really annoying when editing.
    Any help is greatly appreciated.
    Thanks,
    Ymir

    You've toggled Loop Playback on. The keyboard shortcut - in case you pressed this accidently during editing - is Control-L.
    Pressing Control-L once more should toggle it off.

  • Edited Recording jumps back to the beginning after crop

    I have several recorded Connect meetings that have been lightly edited. The first few seconds have been removed and, on some, a few seconds in the middle have been cropped out when the speaker flubbed a word or two. I am finding that, on the ones with mid-recording crops, the playback jumps back to the begining for a few seconds and them catches up and contimues normally. Is this just a limitation of the Connect editing mechanism (as limited as it is)?
    I have tried to leave the beginning alone and just crop out the middle and it still hiccups when it hits that section. Any thoughts on this?
    Thanks!
    My Connect version info:
    7.0,723
    Connect 7.0 r. 723/c. 427912/b. Fri Jun 27 15:37:57 2008
      Presenter r. Presenter7GM
      FMS r. Mustang_Connect 3_0_0_1208
      Licensed

    Hello,
    You can set a timeout to handle what happens when no one
    interacts with the computer for a certain period of time. In your
    startMovie script, add
    on startMovie
    the timeOutLength = 60*60 --Add a length here. It is in 60ths
    of a second, so 1 minute is 60*60
    end
    Then, in a movie script, add
    on timeOut
    --Put your script here
    go to frame 1
    end
    That should be it. I realize you don't speak English well,
    but this should put you in the right direction if you don't
    understand it all.

  • Extend End date after the end date has reached

    Hi gurus,
        We are using SRM5.0 on ECS with backend ECC5.0.
        We notice that after the end date of bid has reached even though there is a bid submitted by supplier , the purchaser still can extend the end date to a later date as long as he has not made the accept or reject choice.
        If it is the case, the purchaser can view the price after the end date reached and then extend the end date and maybe tell other supplier what the price the opponent has submitted. This is not allowed and should be penaltied.
        We just want to know how to avoid this in the term of system. Can we make the
    end date field unchangeable after the end date has reached? or any other solutions?
    Thank you in advance.
    Message was edited by:
            YE Wang

    Hi,
    As Teja and SAndeep mentioned,you can go for either the Approval or BADI approach.
    In case you are implementing the BADI,you can make the concerned fields grayed out so no changes are made but then this would mean that <b>no changes
    </b> can be done at all after the END date has been reached.
    In case of workflow,you can have you starting conditions in which you will compare the end date and the system date .If same,you can trigger  a Workflow for approval of any changes to be done further.So even if the changes are made,the chnages are approved by a higher authority.
    Another way would be to implement the "BBP_DOC_CHECK_BADI" to check whether the end date has been reached and then allow the user to do any changes.You can use the FM "BBP_PD_BID_GETDETAIL" to get the details of the BI and then check.In this case,you can additionally check for other parameters of the User like role,authorisation based on which he can make changes in exceptional cases.
    BR,
    Disha.
    <b>Pls reward points for useful answers.</b>

  • Why does my iphone 3gs screen goes black after reaching another party and won't come back on to press end the call

    why does my iphone 3gs screen goes black after reaching another party and won't come back on to end the call

    hi smalley3,
    Welcome to the Forums.
    The flickering issue maybe due to a bad LCD cable or in some cases, a faulty GPU (the GPU is integrated to the CPU, and the CPU is soldered to the motherboard).
    If there's still no image on the screen even after connecting an external display then you likely have a bad GPU.
    In this case, I recommend you contact support for service (and also to see if there's a consideration that can be done on the warranty repair).
    Support phone list
    Regards
     

  • Allow certain users to capture quotation after bid end date

    Hi
    Is it possible to allow certain users to be able to capture quotation on behalf of suppliers using surrogate bid after the end date has been reached but before the opening date? How would I do this?
    Regards

    Hi
    As the end date and opening date are at the header level common to all bidders/vendors, we cannot manually capture quotation for specific suppliers using surrogate bidding. I dont think there is even a BADI for this.
    Rgds
    Reddy

  • Terminal - how to jump type to the start/end of a word or line?

    How do I jump to the start or end of a word or line in Terminal?
    In other OS X apps, Cmd or Opt + left/right arrows move to the start/end of a line or word respectively.

    Try these (note: the first two require the shift key, at least for me):
    ctrl-A beginning of line
    ctrl-E end of line
    (note: the next two require that you have the Terminal preferences, "settings" , "keyboard" opened, and the checkbox for "Use option as meta key" checked)
    opt-f forward word
    opt-b backward word
    ctrl-u clears the line before the cursor position. If you are at the end of the line, clears the entire line.
    ctrl-f forward character
    ctrl-b backward character
    ctrl-d delete character
    ctrl-l clear screen
    pageup page up in buffer
    pagedwn page down in buffer
    More here:
    http://osxdaily.com/2006/12/19/command-line-keyboard-shortcuts-for-mac-os-x/

  • BH-214 start to play music after call ended.

    Hi,
    I have a BH-214 and a E52, after i end  or miss a phone call the music
    start to play. This does only happen if i left the player in pause mode,
    if i shut the player down I don't have any problem.
    Does any  one else have this problem? Can it be solved easy or do i have to hope for a
    software update?   ( btw, does anyone from nokia read the forum? )
    // Fredde

    That is the intended behaviour. Playback stops when the call comes in and resumes when the call is finished.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • How Do I Filter a Report Using a Multi Select List Box and Specifying Date Between Begin Date and End Date

    Hope someone can help.  I have tried to find the best way to do this and can't seem to make sense of anything.  I'm using an Access 2013 Database and I have a report that is based on a query.  I've created a Report Criteria Form.  I
    need the user to be able to select multiple items in a list box and also to enter a Begin Date and End Date.  I then need my report to return only the records that meet all selected criteria.  It works fine with a ComboBox and 1 selection but can't
    get it to work with a List Box so they can select multiple items.  Any help is greatly appreciated while I still have hair left. 

    The query should return all records.
    Let's say you have the following controls on your report criteria form:
    txtStart: text box, formatted as a date.
    txtEnd: text box, formatted as a date.
    lbxMulti: multi-select list box.
    cmdOpenReport: command button used to open the report.
    The text boxes are used to filter the date/time field DateField, and the list box to filter the number field SomeField.
    The report to be opened is rptReport.
    The On Click event procedure for the command button could look like this:
    Private Sub cmdOpenReport_Click()
    Dim strWhere As String
    Dim strIn As String
    Dim varItm As Variant
    On Error GoTo ErrHandler
    If Not IsNull(Me.txtStart) Then
    strWhere = strWhere & " AND [DateField]>=#" & Format(Me.txtStart, "yyyy-mm-dd") & "#"
    End If
    If Not IsNull(Me.txtEnd) Then
    strWhere = strWhere & " AND [DateField]<=#" & Format(Me.txtEnd, "yyyy-mm-dd") & "#"
    End If
    For Each varItm In Me.lbxMulti.ItemsSelected
    strIn = strIn & "," & Me.lbxMulti.ItemData(varItm)
    Next varItm
    If strIn <> "" Then
    ' Remove initial comma
    strIn = Mid(strIn, 2)
    strWhere = strWhere & " AND [SomeField] In (" & strWhere & ")"
    End If
    If strWhere <> "" Then
    ' Remove initial " AND "
    strWhere = Mid(strWhere, 6)
    End If
    DoCmd.OpenReport ReportName:="rptMyReport", View:=acViewPreview, WhereCondition:=strWhere
    Exit Sub
    ErrHandler:
    If Err = 2501 Then
    ' Report cancelled - ignore
    Else
    MsgBox Err.Description, vbExclamation
    End If
    End Sub
    If SomeField is a text field instead of a number field, change the line
            strIn = strIn & "," & Me.lbxMulti.ItemData(varItm)
    to
            strIn = strIn & "," & Chr(34) & Me.lbxMulti.ItemData(varItm) & Chr(34)
    Regards, Hans Vogelaar (http://www.eileenslounge.com)

  • Reached end of file while parsing error

    I have a problem. It looks like my program has no errors but I get an error that says "reached end of file while parsing" (note: this is being developed in NetBeans). Can you help me?
    class LongNumbers {
        public static void main(String[] args) {
            long numbers = 12345678910L;
            int number = 2;
            switch (number) {
                case 1: System.out.println("One\nTwo\nThree\nFour\nFive\nSix\nSeven\nEight\nNine\nTen");
                case 2: System.out.println(numbers);
            int firstArg;
            if (args.length > 0) {
                try {
                    firstArg = Integer.parseInt(args[0]);
                } catch (NumberFormatException e) {
                    System.err.println("Argument must be an integer");
                    System.exit(1);
    }

    Oh, nevermind. I found the problem. The admins can delete this if they want.

  • Reached end of file whlie parsing

    Hello,
    I get the error message "reached end of file while parsing" when I try to compile the below program.
    Does anybody know why I am getting this message?
    I think my braces are all paired.
    Thanks.
    import javax.swing.*;
    import java.awt.*;
    import java.awt.event.*;
    public class DrawFillRect extends JApplet {
         private MyColorChooser chooser;
         private JButton paint;
         private RectPanel myPanel;
         public void init()
              chooser = new MyColorChooser();
              Container c = getContentPane();
              c.add( chooser, BorderLayout.WEST );
              myPanel = new RectPanel();
              paint = new JButton( "Paint" );
              paint.addActionListener(
                   new ActionListener() {
                        public void actionPerformed( ActionEvent e )
                             myPanel.draw( chooser.getCustomColor() );
              c.add( paint, BorderLayout.CENTER );
              c.add( myPanel, BorderLayout.EAST );
    }     

    The error is likely coming from code that you are not showing us. Look carefully at the error message to see what line of code is setting it off, then start debugging.
    edit: please see my message in your other thread. It is considered rude in all societies, including this one, to have received help and not to have acknowledged it. This may affect the willingness of members to help you in the future.
    Edited by: Encephalopathic on Aug 17, 2008 8:30 PM

  • CC app manager update  failed with error code 50 after reaching about 35%

    Trying to update the CC app manager. The update is always very slow  (I have ATT DSL, lowest level) and I usually terminate it after an hour or so. Today I let it run and it failed with error code 50 after reaching about 35%. Any ideas?

    Update to my original post. I read through some of the suggestions that I found in other threads for fixing this problem, and it appears that this has been an ongoing issue. Numerous fixes have been suggested, some very convoluted, difficult, and involved, including those that came from the customer support folks.  I passed on those as this should be something simple. How Adobe manages to let updating of their own software turn into an ongoing problem is beyond me and sort of defeats the purpose of subscribing. I then noticed that a simple fix had been suggested a few times, so I tried that.
    The user suggested fix that worked for me was:
    1) Restarted computer (Asus Windows 7 i3 machine for me) in Safe Mode with Networking. Logged into my separate Admin account just in case.
    2) Started the creative cloud desktop app.
    3) The app said it needed to be updated. I hit the update button.
    4) Update started and proceeded slowly as it had in many previous failed attempts (I have ATT DSL at the slowest level, but it is not dial-up). Within about 30 min, the update succeeded.
    5) Restarted computer in normal mode.
    6) The creative cloud desktop app now did not say it needs to be updated, and I can update my other apps normally. Have not updated LR or PS yet, but plan to try. If that fails, I may try doing it in the Safe Mode with Networking.
    So, that was relatively painless and much much simpler than many of the other suggestions I saw. Do not know if it will work for everyone, but I wanted to post the fix that worked for me. Thank you very much to the 2 or 3 users who had suggested this fix earlier (sorry, I did not write down your IDs, but the threads can be found by searching for creative cloud desktop update fail error code 50). Hope this saves some people a lot of time.

  • If I am buying single app adobe premier pro by annual prepaid plan,after the after the end of the year subscription would it be possible to use the program further without updating or I should pay each year?

    If I am buying single app adobe premier pro by annual prepaid plan,after the after the end of the year subscription would it be possible to use the program further without updating or I should pay each year?

    Thanks
    2 бер. 2015 15:50, користувач "Peru Bob" <[email protected]> написав:
        If I am buying single app adobe premier pro by annual prepaid
    plan,after the after the end of the year subscription would it be possible
    to use the program further without updating or I should pay each year?
    created by Peru Bob <https://forums.adobe.com/people/Peru+Bob> in *Premiere
    Pro* - View the full discussion
    <https://forums.adobe.com/message/7243337#7243337>

  • How to define payment term - Net due 45 days after month end

    Anyone have experience of payment terms such as "Net Due 45 days after Month End"?
    I'm trying to define payment terms where the amount is due X days after month end.
    Terms such as 10 days after month end are OK because I can set "Months Ahead" = 1 and "Day of Month" = 10
    However, I can't exceed a value of 31 in the "Day on Month" field. I could assume that a month is 31 days and therefore set "Months Ahead" =1 and "Day of Month" = 14. However, this won't always be true (depending on the month) and it will impact aging buckets.
    Anyone encountered this before? (These payment terms seem to common in France and Denmark)

    Hi Supriya,
    In OBB8, create a new payment term with the following settings -
    Default for baseline date = No default
    Payment terms/Term 1/Fixed date = 1
    Payment terms/Term 1/Additional months = 2
    This payment term will ask you for a baseline date on document entry. You can give the delivery date as the baseline date. If required, this date can be changed after posting the document also.
    Hope this helps.
    Regards,
    Mike

  • Does track end jump trump chapter or story end jump?

    I have a DVD with 1 menu & 3 tracks. Tracks 1 & 2 each contain l short video (different audio or video formats) and track 3 contains 3 short videos which I have broken into 1 story w/3 chapters. On track 1, there is 1 chapter marker and I have set its end jump back to the menu. The end jump for the track itself is set to Track 2. Button 1 connection is set to the chapter marker. Ditto for track 2 except its end jump is set to track 3 while its one chapter marker end jump is set to menu 1. Button 2 is targeted to track 2, chapter 1. Track 3 has 3 chapters. It's end jump is set to menu 1. The chapters within the story are also set to menu 1 and it works the way I want it to. Button 6 is a PLAY ALL button targeted to track 1. When I select button 1, the video ends and continues on to track 2 instead of going back to menu 1;. When I select button 2, it also contiunues on (to track 3) instead of jumping back to menu 1. My goal was to be able to access each individual video and then jump back to the main menu. I tried adding stories to each of Track 1 & 2 and making the story end jump go back to he main menu but it seems the track end jump trumps both chapter & story end jumps. Anybody have any solutions to my problem? thanks.
    Steve

    Hi:
    You can do it using a script. Take the DVDSP User Manual and look for the topic Jumping to a Menu's Loop Point (Chapter 14 - Creating Scripts) and you'll find a detailed description of how to do it.
    DVDSP User Manual download page
    Hope it helps!
    (1191)
      Alberto

Maybe you are looking for