Playback keeps jumping forwards on scrollback
I used scroll back to find a programme on ITV and played it back. Several errors ocucured:
1) They programme kept jumping forwards to the next ad break. I had to watch the ads then rewind to the point where it jumped forward. This happened about 8 times
2) Near the end, the programme jumped forward to the end, so I had to start the programme from the start (and watch the adverts) then fast forward to where it jumped from.
3) Twice it froze completely and I had to restart the programme (and watch the adverts again)
I have watched about 18 sets of adverts but only seen 1 hour of the film! The box was brand new yesterday. Is there anything I can do?
The engineers checked the wiring, signal and setup when they came last week and the week before (a failed attempt to fix the old box). The box was installed and checked by an engineer.
I am using the backwards EPG to activate the ITV player to play an on demand programme.
"Do your other on demand players play normally (eg 4OD , Demand5 etc) ? ie is the problem only with the ITV player.
Do other ITV player programmes play oK ?" I have noticed a problem on channel 5 and other channels during normal play - I cannot "rewind", if i try to go back 12 seconds (or any other time) it takes me back to the start of the programme (ie: from the time I changed to that channel). If I then try to fast forward, it jumps forward to the current time. It seems to be better on BBC.
"Have you checked for any player updates ?" It is up to date and it is brand new box
Similar Messages
-
My iPod shuffle periodically skips across multiple songs...playing a song or two in full and then jumping forward or back multiple songs after playing only moments of a song. Please tell me what I can do to fix this situation. Thank you very much.
This is in regards to a 4th gen 40gb clickwheel ipod.
Hi, i've also been having a very similar problem with my ipod as well. I find that regardless of which windows-based pc i use (either my xp laptop @ home, or my win2000 desktop @ work) windows and itunes refuses to recognise my ipod. In windows explorer it will show it as a removable drive, but if i click on it, windows freezes. If I try to disconnect it, I cant because windows keeps reporting that 'the device is being used, try disconnecting later' and so then i shut down my laptop to disconnect it safely.
Lately, like you, i've also noticed that clicking sound it makes. It happens when i connect my ipod to my computer - like the drive inside it is constantly restarting or something, and i get it when i'm playing / charging it in my dock. I've also noticed that when it's playing whilst charging, it just freezes on a song, then skips a couple of songs.
I've just discovered the disgnostic tools on my ipod, so i think i'll run a couple of tests (ie HDD scan) and depending on the outcome, i'll go visit the apple store. -
My playlist keeps jumping back
I will be listening to a playlist on my iPhone 4s for a few songs and then pause. A few hours later I will come back to the music App and press play, but it will start playback from the song that I started with last time. So I have to skip any number of songs to get back to where I left off on the playlist. It does this with playlists or when I listen to my entire library on shuffle. Sometimes it keeps jumping back to the same song, no matter how many times I've paused and restarted. Every once in a while it will remember where I left off, but 9 times out of 10 it does not. This is really annoying since I want to listen to the whole playlist, but have to keep skipping through songs to get back to where I was without having to listen to repeats. Any ideas?
I have the same problem on my iPhone 5S, and it is annoying. There may be a fix, however. Go to the Control Center, it seems you can start your playlist where you left off. I'd prefer to be able to do it in Music.app, or at least to have a preference that lets me continue where I left off in the playlist.
Another thing I noticed. When you add albums to a playlist, it seems the "add all songs" button is missing. That's kind of annoying when the album has lots of songs. -
Hello.
I need your help.
I put jump forward button from library in Adobe Director my sprite "Right arrow" and It's not working. How can make to work so that to go next windows?
-- DESCRIPTION --
on getBehaviorDescription me
return \
"JUMP FORWARD BUTTON" & RETURN & RETURN & \
"Allows users to retrace their steps after having used the Back button." & RETURN & RETURN & \
"This behavior works in association with the Jump Back Button, which in turn relies on the Jump to Marker Button and/or Jump to Movie Button behaviors." & RETURN & RETURN & \
"These behaviors store visited markers in a global variable: gNavigationButtonList. " & \
"While authoring, the Jump Back Button may take you to other (unconnected) movies where you used the same behavior. " & \
"If you find this disconcerting, type 'clearGlobals' into the Message Window before you run your current movie." & RETURN & RETURN & \
"If you wish to use the Jump... " & \
"behaviors both on the Stage and in a MIAW, and you wish to make the content of each entirely separate, you will need to create a copy of the whole set of behaviors, and change all occurrences of the global name in all the behaviors in one set. " & \
"(Use the Find command, followed by the Replace All button, limiting the search to the current script). " & \
"Use one set of behaviors for the MIAW and the other for the Stage." & RETURN & RETURN & \
"PERMITTED MEMBER TYPES:" & RETURN & \
"Graphic members" & RETURN & RETURN & \
"PARAMETERS:" & RETURN & \
"None" & RETURN & RETURN & \
"ASSOCIATED BEHAVIORS:" & RETURN & \
"* Jump to Marker Button" & RETURN & \
"* Jump to Movie Button" & RETURN & \
"* Jump Back Button" & RETURN & \
"* Push Button (to alter rollover / mouseDown states)"
end getBehaviorDescription
on getBehaviorTooltip me
return \
"Use with graphic members." & RETURN & RETURN & \
"This behavior can only be used in conjunction with the Jump Back Button behavior, which in turn relies on the Jump to Marker Button and/or Jump to Movie Button behaviors. " & \
"When the user clicks on a sprite with this behavior the playback head will retrace the steps previously taken in the reverse direction by the Jump Back Button."
end getBehaviorTooltip
-- NOTES FOR DEVELOPERS --
-- The main handler is GoForward, which is triggered by mouseUp. The Initialize
-- handlers checks if the global gNavigationButtonList variable has the right
-- structure, or creates it if it does not already exist.
-- USE OF 'JUMP BACK/FORWARD BUTTON' BEHAVIORS
-- Information about what markers have already been visited is stored in a
-- global variable: gNavigationButtonList. As a global, this variable is
-- available to all navigation behaviors, on any sprite in any movie.
-- gNavigationButtonList has the following structure:
-- [#stack [...], #index: [...], #forward: [...]]
-- Each of the subLists has the structure:
-- [[#frame: <integer>, #movie: <movieName>], [...]]
-- #index is not currently exploited. It provides a list of all markers
-- visited, in the order of their first visit. It could be used to create
-- a pop-up menu, or to check if a player had visited a particular scene.
-- When the 'Jump Back Button' is activated, the marker nearest to the playback
-- head is appended to the #forward list. When the 'Forward button'is
-- activated, this last item is copied to a local variable,then removed from
-- the #forward list. Information concerning the current marker is appended to
-- the #stack, so that users can once again use the 'Jump Back Button'.
-- Going explicitly to "frame x of movie y" triggers the movie's
-- prepareMovie and startMovie handlers. If the most recently visited
-- marker is in the current movie, the command "go frame x" is used instead.
-- USE OF "PUSH BUTTON" BEHAVIOR
-- The "Push Button" behavior can be used to deal with the rollover and
-- mouseDown states of the "Jump Forward Button". When this behavior is
-- initialized, it asks each behavior on the same sprite to return a
-- behavior reference, if it happens to be the "Push Button" behavior. If
-- a reference is returned then the "Jump Forward Button" sets the button's
-- enabled state to indicate whether the #forward list currently contains
-- frames to jump to.
-- TROUBLE-SHOOTING
-- See "Jump Back Button"
-- HISTORY --
-- 10 September 1998: written for the D7 Behaviors Palette by James Newton
-- 2 November 1998: all member-swapping removed (use Push Button behavior)
-- 9 November 1998: enabled/disabled state added to Push Button interaction
-- 5 January 2000: updated to D8 <km>
-- GLOBAL VARIABLE --
global gNavigationButtonList
-- PROPERTY --
property myStateBehavior
property myState
-- EVENT HANDLERS --
on beginSprite me
Initialize me
end beginSprite
on prepareFrame me
if myStateBehavior.count() then CheckIfActive me
end prepareFrame
on mouseUp me
GoForward me
end mouseUp
-- CUSTOM HANDLERS --
on Initialize me --sent by beginSprite
-- Error checking: Global variable
if voidP (gNavigationButtonList) then
-- -- Initialize gNavigationButtonList
gNavigationButtonList = [#stack: [], #forward: [], #index: []]
else
-- Is it the right global?
if gNavigationButtonList.ilk <> #propList then
ErrorAlert (me, #invalidGlobal, gNavigationButtonList)
else if not gNavigationButtonList.findPos(#stack) then
ErrorAlert (me, #invalidGlobal, gNavigationButtonList)
else if not gNavigationButtonList.findPos(#index) then
ErrorAlert (me, #invalidGlobal, gNavigationButtonList)
else if not gNavigationButtonList.findPos(#forward) then
ErrorAlert (me, #invalidGlobal, gNavigationButtonList)
end if
end if
-- End of error checking
-- Check for "Push Button" behavior on same sprite
theSprite = sprite (me.spriteNum)
theBehaviors = theSprite.scriptInstanceList
myState = -1
myStateBehavior = []
call (#PushButton_GetReference, theBehaviors, myStateBehavior)
end Initialize
on CheckIfActive me
-- Enables/disables the "Push Button" behavior
forwardCount = count(gNavigationButtonList.forward)
forwardState = forwardCount <> 0
if myState = forwardState then exit
myState = forwardState
call (#PushButton_ToggleActive, myStateBehavior, forwardState)
end CheckIfActive
on GoForward me -- sent by mouseUp
forwardCount = count(gNavigationButtonList.forward)
if not forwardCount then
exit
else
currentMarker = [#frame: marker (0), #movie: the movieName]
-- Transfer currentMarker to #stack
gNavigationButtonList.stack.append(currentMarker)
-- Go forward
markerToGoTo = gNavigationButtonList.forward.getLast()
gNavigationButtonList.forward.deleteAt(forwardCount)
theFrame = markerToGoTo.frame
theMovie = markerToGoTo.movie
if theMovie = the movieName then
go theFrame
else
go theFrame of movie theMovie
end if
end if
end GoForward
on substituteStrings(me, parentString, childStringList) --------------
-- Sent by errorAlert
-- * Modifies parentString so that the strings which appear as
-- properties in childStringList are replaced by the values
-- associated with those properties.
-- <childStringList> has the format ["^1": "replacement string"]
i = childStringList.count()
repeat while i
tempString = ""
dummyString = childStringList.getPropAt(i)
replacement = childStringList[i]
lengthAdjust = dummyString.char.count - 1
repeat while TRUE
position = offset(dummyString, parentString)
if not position then
parentString = tempString&parentString
exit repeat
else
if position <> 1 then
tempString = tempString&parentString.char[1..position - 1]
end if
tempString = tempString&replacement
delete parentString.char[1..position + lengthAdjust]
end if
end repeat
i = i - 1
end repeat
return parentString
end substituteStrings
-- ERROR CHECKING --
on ErrorAlert me, theError, data -- SENT BY intialize
-- Determine the behavior's name
behaviorName = string (me)
delete word 1 of behaviorName
delete the last word of behaviorName
delete the last word of behaviorName
-- Convert #data to useful value
case data.ilk of
#void: data = "<void>"
#symbol: data = "#"&data
end case
case theError of
#invalidGlobal:
tError1 = "BEHAVIOR ERROR: Frame ^0, Sprite ^1"
tError1 = substituteStrings(me, tError1, ["^0":the frame, "^1": the currentSpriteNum])
tError2 = "Behavior ^0 requires a global gNavigationButtonList with " & RETURN & \
"the following structure:"
tError2 = substituteStrings(me, tError2, ["^0":behaviorName])
tError3 = "[#stack [...], #index: [...], #forward: [...]]"
tError4 = "Current value = ^0"
tError4 = substituteStrings(me,tError4, ["^0":data])
alert(tError1 & RETURN & RETURN & tError2 & RETURN & tError3 & RETURN & RETURN & tError4)
halt
end case
end ErrorAlert
on isOKToAttach (me, aSpriteType, aSpriteNum)
tIsOK = 0
if aSpriteType = #graphic then
tIsOK = 1
end if
return(tIsOK)
end onHey there ZeldaFan29,
It sounds like you have some songs that are skipped when using the forward and back buttons on your iPod nano, and that leads me to believe that maybe these songs are skipped over when you are playing your playlist in the iPod as well. I have an article that can help you troubleshoot this issue:
Troubleshooting songs that skip - Apple Support
http://support.apple.com/en-us/HT203351
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
Hi,
I have a newly installed v880 system. I have a situation where the time on the machine will jump forward by 10 to 15 minutes over the course of a few seconds. When it does this, xntpd which is trying to keep the time synchronized to our main time server quits out and says:
Feb 12 18:27:41 yang xntpd[532]: [ID 204180 daemon.info] synchronisation lost
Feb 12 18:32:54 yang xntpd[532]: [ID 854739 daemon.info] synchronized to 192.168.200.15, stratum=4
Feb 12 18:32:54 yang xntpd[532]: [ID 261039 daemon.error] time error 1442.853530 is way too large (set clock manually)
The time will jump forward regardless of whether or not xntpd is running. It's not a gradual drift, the system keeps time for some period (a day, 12 hours, 6 hours...) and then within the span of less than a minute it will gain 10 to 15 minutes on the clock.
The system is SunOS yang 5.8 Generic_108528-18 sun4u sparc SUNW,Sun-Fire-880
Could I have a bad internal clock on the machine perhaps? Any ideas?
Thanks,
Simon.You might want to read this as well concerning setting dosynctodr in version of Solaris after 2.6:
http://sunsolve.sun.com/pub-cgi/retrieve.pl?doc=fsrdb%2F19195&zone_110=19195&wholewords=on -
I am a macbook user latest update & cannot get beyond the password - have used Adobe password & administrator password but the "ok" keeps jumping - hint: says "black & white" Very frustrating.
This password prompt is presented by your operating system, and is intended to keep you from accidentally installing software.
If this is your personal machine and you don't need a password to log into the computer when it first starts up, you can probably leave the password blank and click OK to get past this prompt. If this is your personal machine and your normal password isn't working, check to make sure that CAPS LOCK is off, and type the password carefully.
If this is your work machine and it's asking for an Administrator password, well, you'll need to have a conversation with your friendly IT person.
If you're still stumped, you may need to reset the password on your Mac:
http://support.apple.com/kb/PH18653
http://support.apple.com/kb/PH14325
http://support.apple.com/en-us/HT201240 -
On the Computer using Adobe Digitial Edition there is no possibility to jump forward/back using the
I am using a brand new iPad Air and a MacBook Pro with Retina and on the Computer using Adobe Digitial Edition there is no possibility to jump forward/back using the arrows in the menu. It is not possible to jump to a certain page as well. The overall speed is incredible slow to switch between pages.
Exact same problem here - Win 7, ADE V3.0. - pages wont turn unless I click on the symbol at the top RHS of screen for Full/Normal size screen after Page Up/down or a click on the contents page.
Hopefully a bug or something, and not a 'feature' :-) -
Satellite A300 screen keeps jumping up and down
Hi,
What is on my screen keeps jumping up and down, any thoughts, is this a problem with video card in Satellite A300?I have tried to install the display driver from the European website. During uninstallation I got a messgae to say failures occurred during uninstallation, and then during installation I got the message of Install package failure!
I have my external monitor now connected to laptop, but in personalising display settings, I cannot get my computer to recognise that I have two monitors now, as both keep coming up with number 1 (Multiple Monitors) on ATI Mobility Radeon HD 3650, and they both have that degraded view, a bit like in safe mode.
So in checking of device manager under display adapters I have:
ATI Mobility Radeon HD3650
and under Sound, video and game controllers I have:
High Definition Audio Device
Realtek High Definition Audio
In this whole process I deleted a file that was previously here called
ATI HMD...
should I resinstall this?
So I'm not sure if the new display driver has been installed? help. -
My mouse keeps jumping all over the place and i dont know why!
My trackpad doesnt allow me to fully control the mouse on the screen! it keeps jumping all over the place and i dont knw why! i updated my computer yesterday and it was working fine but by the end of the night it started to not function properly again.
A fairly well known flaw that occurs to some trackpads. See here: http://support.apple.com/kb/TS1449
-
My internet service provider is BT in the UK. The home page is www.btinternet.com. After I've logged on, the home page displays fine - I can see the summary of my emails in one of the windows on the home page. The problem comes when I click on the mail application. The page then tries to load the email application. However, it never actually loads, it keeps jumping between connected and waiting for login. It never achieves it so I just have to click the 'back' button to get to the home page. I use chrome and ie but neither has this problem.
I retraced my steps to how i got the Google app:
App Store icon on Home Screen > Search, at bottom > entered Google
The first Google App on the screen appears:
Google logo small g in blue square: Google Search; Open (because it is already installed). Below that is a picture of the iPod with the usual Google Search screen. I have never inserted a link into a discussion group so i hope you can open this.
http://https://itunes.apple.com/us/app/google-search/id284815942?mt=8
Does this bring us any closer? -
Screen keeps jumping up and down but only when using firefox-so not a hardware problem
The screen keeps jumping randomly up and down but nothing is being touched or pressed. The screens can be email, you tube, bank or general internet screens, or even trying to create this page
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?
There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not apply in your case.
1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
2. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and in that case the unit must be serviced or replaced.
3. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
4. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
5. Reset the System Management Controller.
6. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
7. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to behave erratically. If you're using such an adapter, disconnect it and test.
9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested. -
My magic mouse keeps jumping all over the page
Hi, my magic mouse keeps jumping all over the page and random apps keep appearing on my screen when I'm in facebook and it keeps sliding onto my dashboard screen.
Thanks so much for replying Barry. Did what you said but took me 6 attempts to be able to reply to you so unfortunately did not work. Have to wait over a week to get into Apple store so I guess I've just got to wait. This is my second magic mouse and its driving me crazy. Touch pad also playing up but thanks for the advice and have a good day.
Megs -
My iphoto keeps jumping back to last import
My iphoto keeps jumping back to last import, I am using photo's in a event and if I click on anything on my desk top it flips out fo the event I am in and jumps back to last import please help
Close iPhoto and open the iPhoto Library package as shown in this screenshot:
Look inside the Auto Import folder and move whatever you find to the Desktop. Do not many any other changes.
Launch iPhoto and it should not jump back to the last import smart album. If there are any image files that you moved to the Desktop that you want and are not in the library then reimport them. -
My SD video keeps jumping between the upper and lower frames. So the video starts frame blending and blurring in and out. The sequence settings are set to
Editing Mode: DV NTSC 29.97 frames/second.
Pixel Aspect Ration: D1/DV NTSC (0.9091)
Fileds: Lower Field First
Display Format: 30fps Non-Drop-Frame Timecode
720 x480What is the source of your video, and exactly what is inside your video?
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
Maybe you are looking for
-
TC and WD500 External drive - Locks up when copying large files
I have a TC with a Western Digital 500GB my Book connected to the USB port on the TC that I use for network Storage. Everything works fine until I try to copy large files or directories from the Finder mounted share. After the copy freezes the extern
-
ITunes locks up when Home Sharing is turned on between two macs
Ok normally On these discussions people ask a question hoping for the answer to fix their problem. Well I'm going to post a question and give the answer all in one post since I figured out. When I would open up iTunes on my second mac hoping to share
-
SharePoint 2013 permissions on the sub-site/list/library level
Hello, I would like to understand how access works on SP 2013 restricted sub-sites and the restricted list/libraries (by permissions) stored on the restricted (by permisssions) sub-sites. I've created a teamsite in SP 2013, with the sub-sites and lib
-
Java.lang.StringIndexOutOfBoundsException: String index out of range: -2
Hello, I have a question about this error: Exception in thread "main" java.lang.StringIndexOutOfBoundsException: String index out of range: -2 I am doing my java development in IBM Rationale eclipse. I am compiling and running everything just fine. W
-
Upgrade MacBook Pro (Late 2006) 17-inch: 2.33GHz(MA611LL/A)
Hi, I want to upgrade my Hardware on Mac book pro (Late 2006) 17-inch: 2.33GHz(MA611LL/A) http://support.apple.com/kb/SP24 Ram: 2GB (two SO-DIMMs) on 2.33GHz configuration; two SO-DIMM slots support up to 3GB HDD: 100GB 7200-rpm Serial ATA hard drive