Playback of new recordings?

When I record a new pass in the arrange track with previously recorded audio, it always plays the original take and not the new one, how do I stop Logic from doing this and prioritize the audio playback of the new take?

Logic can record multiple passes on duplicate copies of the same Audio Object, however, only one of those tracks will playback at a time. It's usually the track lowest on the arrange page (or the highest, I can't recall off the top of my head), or if one starts before the other, the first one will play.
Regardless, the way to control this is to mute the previous pass, and keep muting as you go to record a new take.
If you have no intention of keeping the previous pass, simply activate Replace mode (the orange X on the transport), and Logic will act like a tape machine, recording over the previous take.

Similar Messages

Voice Memos (new recordings) - transfer to computer

I have synced voice memos recorded in the past to computer.
Recently, I have made some NEW RECORDINGS but do not know how to copy them to the same computer.
In iTunes, under "On This iPhone", the NEW RECORDINGS are not shown.
Waht is the problem if the below is shown:
"The iPhone is synced with another iTunes library.
Do you want to erase this iPhone and sync with this iTunes library?"
Also, how to solve the problem "Apple Mobile Device USB Driver is an Older USB device and might not work with USB 3.0".
I have already installed the latest update and yet still encounter the above problem.
Can someone please advise! Thanks!!!

iTunes & iPod Hints & Tips
http://support.apple.com/kb/ht2396
http://social.msdn.microsoft.com/Forums/en/isv/thread/60cd813c-3473-4856-9870-9d 3e36a49a24
Also do a Google search.

Problem with video playback, youtube, news channels etc

I've taken a good look around and can't find any answers to this, so here goes.
I use my iMac in W7 a lot as it suits me for work, however, when I view news videos (at www.bbc.co.uk for example) or on YouTube the screen and whole computer freezes, normally at the end of playback, but occasionally during the video. I give it 10, 20, 30 seconds and usually it rights itself. I have the latest video drivers, and the latest graphics drivers installed. This doesn't happen in OSX. Anyone else had this? Anyone got a solution?

Oh gosh, now I am worried.
Windows 7,
Control Panel,
Device Manager,
Display Adapters,
'NVIDEA GeForce 9400'
That's what it says.
Under Sound, Video and Game Controllers,
'Cirrus Logic CS4206A (AB 78)'
I've never changed, adjusted or touched these, I just use the machine.
I just checked the specifications, http://en.wikipedia.org/wiki/IMac%28Intel-based%29#AluminumiMac and it is NVIDEA unless I am looking at the wrong thing
Message was edited by: oldshirts

When I punch in I still hear old performance on playback, plus new!

What am I doing wrong. When I punch in I hear the old performance while recording and also upon playback. Old and new recording plays.

All apps, all paid and free apps include DRM protection which is tied to the iTunes account/Apple ID that was used to download the apps. You will need to use the Apple ID that was used to download the apps to install app updates.
Apps downloaded with one Apple ID can't be transferred to another ID and accounts can't be merged.

I cannot record or playback a new App

I have purchased the Royal Yachting Association VHF SRC App for my iMac and downloaded it.
The programme asks me to test that my microphone is working and the playback is working.
I have been to System Preferences and can record my voice to get text onto Word by pressing fn fn - so I know the mike is OK
I have no idea whether the App does record my voice because when I press Playback nothing happens.
My iTunes is working perfectly so I can listen to music and watch videos.
Please help tell me what to do?

Hello,
Thanks for having a look.
Unfortunately i tried what you said but it didn't worked.
I also tried to install firefox again, disable plugins and popup filter.
I investigated a little bit and the website works fine in Opera and IE so i guess it's like a bug in Firefox JS.
Are you able to click on "Create a new account" at this address from your browser? (https://refworks.com/refworks2/)
EDIT: Solved! After a lot of trying the problem was the date of my system which interfered with RefWorks certificate. Nothing to do with Firefox.
Thanks anyway!

Choppy Video Playback with new update 7.5.0.20

Well, here we go again. This latest itunes update is not up to snuff. My video playback has hit rock bottom.. And worst of all, my cpu usage is thru the roof. What the heck dude. You know, I talk to my buddies that own MACS, and of course they never have a problem with their freakin itunes. This has happened before, about a year ago. You can check the video reviews on Battlestar Galactica. I uninstalled and reinstalled, and NADA!!! Same ol' crappy playback. This was not an issue with the previous version. I even performed a system maintenace on my laptop just to make sure the CPU vents weren't clogged with dust. I know that Apple would prefer that the whole world owned a freakin MAC; but for Pete's sake, I am paying them to download content!!!!Paying!!!!!!! Give me something I can look forward to. Dread is what I feel everytime they announce one of their cute updates.

Me too. All I get is audio and a green screen when i try to play a video(that i *paid for* in some cases). I asked a question here a year ago and have yet to get an answer to!

Unable to delete recordings/ action new recordings

Attempting to clean up my +box and it won't let me delete or action recordings (VRC 004) is displayed on the red banner at every attempt. Even scheduled recordings are failing. Any help?

Have you tried rebooting the box yet? That fixes quite a lot of Vision problems.

Canon HF G10 Camcorder - "Cannot Record" error message when trying to make new recordings

Hi All,
I purchased Canon HF G10 camcorder 6 months ago and suddenly I am getting a "Cannot Record" error message each time I press the record button - it simply stopped working and I am puzzled about this - has anyone else faced this problem? if yes, were you able to resolve it? Any insights or torubleshooting guidance will be greatly appreciated.
Best regards,
Rajiv Arora.

ra33,
I am very glad to help you with this.
According to the specifications in the user manual, this model records to the internal memory by default in any shooting mode. You can manually select to record to the SD cards, but only in the Manual or Cinema modes. If you are shooting in Auto, clearing out some of the internal memory should stop the "Cannot Record" message from appearing.
If there is anything else I can help you with, please let me know.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

New problem - bad cracks during playback

I'm getting back cracks and crackling during playback despite the fact that there is no obvious cause. The cracks happen when I use any effect (though my gut feeling tells me this isn't the underlying problem). I'm using UAD vst plugins but and Adobe effects but I am no where near being maxxed out, only using around 50-60% of my vst power. The cracks happen even when I use Audition's Studio Reverb or graphic eq.only, no vst.
It sounds like a latency type of cracking or the type of cracking that happens when my plugins are maxxed out (nearly 100% on my meter) but as I said, that's not it (although it goes away when I remove all effects, even Audition effects).
The strange thing is I am only working with 3 tracks!!!...2 guitars and vocal. I have many sessions with full band, easily 2 dozen tracks and not had this problem before. But with only 3 tracks...something is screwy.
When I change the latency the cracking gets worse (currently it's at 1.5 seconds).
Any ideas on how I can troubleshoot this??? My software is up to date and my system is virus checked. I'm also an experienced Audition user (years).
Thanks for any ideas.

Hey guys, my audio computer just developed this crackling on playback about 2 weeks ago.
On mastered out audio files, the crackle is not there, but on playback on new projects (started over the last 2 weeks) there is crackle in the playback on all tracks (I get crackling on playback on my speakers and on my headphones). Even individually, if I mute certain tracks.
I found some weird points when playing with new projects:
-I shut down the computer, and started Audition 2.0 again. I started a new project @ 48000 Htz and 32 bit sampling. And there was NO CRACKLING on playback (on speakers, on headphones, on mastered test audio files)
-I went back to my problem projects with crackling playback and, yup, my playback had crackling on them
-I mastered out my origional raw audio tracks (from the crackling project timeline) and put them on my new project timeline, and NO CRACKLING DURING PLAYBACK.... hmmmmmmm.
I have no idea why it's doing this.
But if your project is having playback issues. Try a full shutdown/reboot, open a new project and do a test record to see if there is crackle. If no crackle on playback, then go back to your crackling project and master out and re-import your raw audio tracks to your new project timeline
If you guys have found another work-around, or a complete fix, post up and lemme know.

Multi-room DVR Issues: Unable to locate hub, interrupted recording, skipping during playback

Hi Guys,
I was wonderng if you could help me. I have been a FIOS customer for many years and have a multi-room HD DVR and 2 HD set-top boxes. I have always had some problems during playback on some recordings where the picture and sound will skip, but over the last several months some new problems have appeared. Frequently during playback of recorded shows the recording will stop playing and I will get a message on the screen "unable to locate hub". I then have to power off the STB, reboot and when I go to the dvr option I have to refresh the devices before connecting to the dvr again. If this happens while a show is recording then the recording stops and then restarts causing the show to be split into 2 recordings. Sometimes I get a message "You have reached maximum playback on DVR". This really frustrating and I would like these issues resolved. I have the older HD dvr, 1 new hd set-top box, and 1 old hd stb. The playback issues happen on both hd stbs. We don't usually watch shows on the dvr itself so I am not sure how it performs during playback. 1 other note that might help troubleshooting is that I can't seem to display the IMG in full screen on the dvr.
Thanks in advance for your help,
Sincerely,
Randy R.

uncorrdinated wrote:
Hi Guys,
..I. Sometimes I get a message "You have reached maximum playback on DVR". This really frustrating and I would like these issues resolved. I have the older HD dvr, 1 new hd set-top box, and 1 old hd stb. The playback issues happen on both hd stbs. We don't usually watch shows on the dvr itself so I am not sure how it performs during playback. ..
Thanks in advance for your help,
Sincerely,
Randy R.
You can only do 1 playback at a time UNLESS you are playing back from the DVR/HUB. If you want to do 2 simultaneous play backs, one of them must be from the DVR. I ran into this same message when my wife would watch a recorded program in one room and I would try to watch a recorded program in another room. Fixed it by moving the DVR to one of the rooms where the conflict occured most often. As for the "unable to locate hub" message. This was a very common problem about a year ago, which was fixed with a software update. You need to check what version software is on all your boxes.

New Version 4.0 Bluetooth Software (SP2)

Found the following news. As stated it works under SP2 as well. Will owners of the Btoes Dongle be getting this update? Maybie a mod, admin or someone from MSI can answer this.
Quote
Broadcom® Upgrades Market Leading WIDCOMM® Bluetooth® Software With Enhanced Security, CD-Like Wireless Stereo Sound and New Profiles
New Release of Industry's Most Widely Deployed Bluetooth Software Also Features Support for Microsoft® Windows XP®-SP2
IRVINE, Calif., Nov 1, 2004 /PRNewswire-FirstCall via COMTEX/ -- Broadcom Corporation (Nasdaq: BRCM), a leading provider of highly integrated semiconductor solutions enabling broadband communications, today announced WIDCOMM® BTW 4.0, the new release of its popular Bluetooth® software, enhancing security and adding advanced audio/video (A/V) capabilities to the industry's most widely adopted Bluetooth software. The new software was tailored and optimized for seamless integration with Broadcom® single-chip Bluetooth solutions and enhanced with important security upgrades for enterprise and small office customers. It was also tested and qualified for native support and seamless operation with Microsoft's recently announced Service Pack 2 upgrade for the Windows XP® operating system (Windows XP-SP2).
Wireless, high quality stereo audio headsets and speakers enabled by the new WIDCOMM BTW (Bluetooth for Windows) 4.0 software is an exciting new application expected to drive widespread Bluetooth adoption for consumers over the coming years. A/V enhancements built into BTW 4.0 software will bring a new level of audio quality to wireless headsets, enabling a generation of products capable of delivering CD-like stereo sound without the need for wires. The same A/V Bluetooth profile support can be expected to appear in upcoming consumer electronics products like MP3 players, cellular phones, PDAs, and other appliances.
"BTW 4.0 answers two distinct needs in the Bluetooth space: enhanced security, and the ability to effectively stream high-quality audio to wireless headphones or speakers. It is changing the dynamics of how consumers will experience multimedia content on their PCs," said Ron Wong, Senior Product Line Manager for Broadcom's Bluetooth software products. "Broadcom's unique ability to design and deliver all the critical technology pieces for next-generation wireless electronic devices enables our partners to bring products to market quickly and with features that hold great appeal for consumer markets."
BTW 4.0 Enhances Security
Bluetooth has established itself as the clear wireless PAN (Personal Area Network) technology of choice in large corporations as well as small and home office environments. Leading PC OEMs are already shipping Bluetooth in a large number of their commercial notebook PCs and are expecting continuous growth and accelerated adoption into 2005. With this rapid adoption, large enterprises have expressed growing concerns over security and software virus spreads. The new WIDCOMM BTW4.0 software incorporates enhanced security capability to help address these concerns. Broadcom implemented unique software functionality and tested it to ensure a higher level of security, to meet the expectations of the most demanding customers and bolster the software against malicious attacks.
New Software Transforms A/V
PC OEMs have come to appreciate the flexibility of embedding Bluetooth into their desktop and notebook computers to connect wirelessly with mobile phones and PDAs. Wireless mice and keyboards are taking advantage of the technology as well, offering valuable freedom and convenience to consumers. These same advantages are now enabled for stereo headsets and speakers with Broadcom's new BTW 4.0 software. Wireless headsets or speakers enabled with Broadcom Bluetooth technology can stream high quality sound while also performing remote control functions such as pausing or stopping play, and selecting tracks. In addition, consumers can place wireless speakers in all corners of the room, enabling enhanced sound and audio distribution for DVD and CD playback.
New Features and Profiles
Broadcom's WIDCOMM BTW 4.0 incorporates the latest software "profiles," which ensure a common set of features between two Bluetooth devices. Bluetooth profiles are developed and standardized through the Bluetooth Special Interest Group (SIG). BTW 4.0 features many of the latest profiles, which provide advanced multimedia capabilities including:
* GAVDP -- Generic Audio Video Distribution Profile
* A2DP -- Advanced Audio Distribution Profile
* AVRCP -- Audio Video Remote Control Profile
BTW 4.0 also supports the Basic Imaging Profile, which provides the ability to "push" and "pull" images wirelessly between a mobile phone or digital camera and a PC. In addition, the new software release was designed to work seamlessly with Broadcom's BCM2035 and BCM2045 single-chip Bluetooth solutions. It was tested and qualified to work seamlessly with Microsoft's latest operating system update, Windows XP-SP2, thereby ensuring forward compatibility to PC OEMs and end-users as they upgrade to this latest operating system.
End users can be assured that as increasingly advanced Bluetooth A/V applications gain adoption, Broadcom's BTW software will enable a richer and more secure user experience.
Availability
Broadcom's WIDCOMM BTW 4.0 software is currently shipping to Broadcom's early access partners.
[/COLOR]

Finaly here
http://my.so-net.net.tw/dean8888/Widcomm_BTW%204.0.1.700.rar 30MB!

Adobe Connect Desktop - just doesn't download recordings any more...

Hi all,
Has anyone had issues since the upgrade of this?
I have made the recordings downloadable in all places thru the adobce connect admin area, but when using the desktop client evcewn though i am able to search for the file i am not however able to download it.
The recording does appear in the download queue but does not initiate. This is just unacceptable.
Part of the service is to be able to playback the meeting recordings and while i know i can do this online, it would also be useful to USE ADOBE'S PRODUCTS TO VIEW ADOBE'S BESPOKE RECORDINGS (Since they are not available in any other downloadable format, wouldn't midn so much if it just worked for once without issues.)
Add this to the whole "Adobe Presenter - the worlds most unstable and bugged out piece of software ever"
Come on Adobe, whats happening to your stuff?!?

Adobe Connect Desktop is no longer supported with Connect 9. However, it should still work. Also, be sure that the recording has been set to allow local downloads.

Difficulty viewing recordings from earlier version of MVP

I have a HDX18 laptop about 6 weeks old. From new I was able to record TV and saved these in the standard location.
Yesterday I updated the MVP software as a result of a prompt from "HP Health Check". (I had more problems with the so called Health Check - see other posts.) The MVP problem is that HP media centre will not recognise the old recordings from within HP media centre. I can record new recordings and play them back with no problem. I can see the old and the new recordings in Windows Explorer in the given location and can play the old recordings from Windows Explorer using "Open With" and selecting "HP MediaSmart Video Main Program" but the old ones refuse to display in the list of recordings within HP Media Centre. What is going on and how do I get them to display?

Okay, sounds like a simple matter of trying to jump to the HD video editting before my technoloogy is ready . I don't have the blu-ray player/burner yet, but was hoping to edit my movies in the HD format and eventually choose the HD output when I'm ready. I've been making progress on my test movie, but its been frustratingly slow with the crashes and choppy rendering so I don't think I'll continue with the higher def source.
My exact machine settings are: AMD 64x2 dual core 6000+ 3Ghz with 3GB of RAM (I was off by 1gb before). I'm running 32 bit Vista, and am using a Hitachi 456gb scsi hard drive (not sure of the speed unfortunately - never really had to worry about it before this). I have external drives that I use for backups, but not for hot usage.
I'll try the HDV approach - thanks a lot for the suggestions on that and the trial banner. I'm hoping the HDV runs smoother then an ice cold one with the big man and his VP.
Any idea about the problems with the track difficulties and lack of PIP features??
Thanks again!
Brian

Recordings Vanished

Hi, I have a silver box (not sure what gen but I've had it about 3 years It says Model STB/CPU: PACE Pace_DiT7421_05_L4/297.) I have/had quite a few recordings on it, some marked to keep, others not, but I go through it fairly often and delete stuff I don't want anymore. My husband set it to record something last night and when we just went to watch it, ALL the recording that weren't marked to keep have disappeared. Not even the thing he set to record last night is there, so it's not a case of the new recordings forcing out the old ones. Does anyone have any ideas?
Thanks
EDIT: I just looked up how to check and it says 11% space remaining. It only has 9 items saved, none of which are HD.

Hi everyone,
I posted on a similar thread here and there was a fix posted by ttyrie that seemed to do the trick.
If you are still having problems drop me in an email and I'll make sure we get this looked at.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Adobe Premiere 8.0 - jerky playback

Guys, here are my computer specs. Should I have a problem with resource requirements?
Base processor
Core 2 Quad Q6700 (K) 2.66 GHz
1066 MHz front side bus
Socket 775
Chipset
Intel G33 Express
Motherboard
Manufacturer: Asus
Motherboard Name: IPIBL-LB
HP/Compaq motherboard name: Benicia-GL8E
Memory
Component
Attributes
Memory Installed
6 GB
Speed supported
PC2-6400 MB/sec
Type
240 pin, DDR2 SDRAM
Hard drive
750 GB SATA 3G (3.0 Gb/sec)
7200 rpm
Video Graphics
GeForce 9500 GS
512 MB GDDR2 memory
I/O Ports: HDMI, VGA, dual-link DVI

I would like to share some recent progress and new problems with PE8.
Firstly, I made a new short-cut for PE and run PE.EXE i/o PE 8.0. EXE. This saves the time on avoiding the Welcome menu. Thanks for the tip.
Secondly I turned off rendering....
Now....
Two nights ago I decided to import all my videos (total length is about 60mins) into the library. I noticed that after I tried to highlight all the clips and drag them into PE timeline, my PE seemed to have frozen. I/O restarting the computer I let it be. I came back the folowing night, all my files were in the timeline ready for effects and transitions. I suppose it just takes PE some time to "process" the imported videos?
Anyways, I tried to playback some clips in the monitor and the video was jerky. I ignored that fact and tried to add a dozen of random transitions here and there. It was very hard to fine tune the transitions because of the jerky playback. OK, I then went to SHARE and export to PC. I exported to a file in HD preset: 1080i, 30fps, etc. I left my computer along again and returned the following morning. The export was successful; took approx 2.5hrs.
A new file was created on my desktop with extension .m2t. No associated software was assigned to playback this new file so I went to "Open With" and chose Windows Media Player. I think I have a 9 or a 10 ver. It played well, the sound was good, video was sharp (no jerkiness), transitions sucked as they were not fine tuned due to the reasons explained above. The .m2t file was measured at 4.7Gb. I brought a 8Gb CFlash card from my SLR and connected it to the PC via USB. When I tried to copy that .m2t file and paste it to my card, which had almost double the required space, I received a prompt saying the file was too large to copy.
I then tried to copy that file to my HDD sony camera, with 120Gb of available space - the same result. The error is - the file is too large to copy. What the heck? How can I test this file for a playback on my TV if I cannot copy it to any external storage device.
p.s. I am trying to find my most favorite transitions: "No Effect", "Cross Fade". I do not seem to find the two from the list.

Playback of new recordings?

Similar Messages

Maybe you are looking for