Playback of repeats in score editor

Is there any way to have Logic intelligently follow the repeats indicated in the score editor during playback? DP, even though the score editor *****, has a way to do this.
One of the main reasons I switched to Logic was so that I wouldn't have to export to a score editor. However, I end up having to make a score only version of my Logic tracks any way because repeats and first and second endings aren't followed.
Thanks in advance.

you can do it by using special kinds of environment objects which will follow meta events. if you set a marker at the repeat sign you can get this fader to make the SPL jump to another marker positioned earlier in the score.
i did it once years ago and found surprisingly easy, but i almost never work with repeats so i don't really bother with it.
you need to read the manual which discusses this in the environment section, one of the few parts of the manual that actually informs you.

Similar Messages

Score Editor- Create Multi-Bar Repeat

I'm transcribing pop songs with a lot of 8 bar repeats. How can I insert a multiple bar repeat symbol into my score? I only see the 1 and 2 bar repeat symbols and I can't even really get those to work for me either.

Indeed - this is something I have really missed in the Logic Score editor for basic arrangements of pop/jazz etc
It is very common to have a multi bar repeat which is not just 1 or 2 bars - 4 bar & 8 would be especially useful in many situations where there is a groove going and you just need a drummer or bass player to keep a chord progression or riff that is obvious.
It would enable one to reduce the number of pages for the part
PS Just to add - notwithstanding Ski's helpful input - that what is need is the capacity to do fill in an actually number above the bars where the two bar repeat is. This very common convention of arrangers is just not available in Logic - and it should be.
If you take Guy's example above, it would mean you could condense the part and not have loads and loads of repeated 2 bar segments. And also ...
.. you would not want to add extra repeat signs etc because you would want the other instrument parts ( ie with more complicated content melody lines perhaps) to be longer - and have the same repeat signs on each part.
In other words, the rhythm section is playing a groove which repeats and the soloist or other instruments are doing other stuff on top of it.
It is in rhythm section parts that I really miss the capacity to add numbers above the repeated two bar sign
Hope this makes sense
Message was edited by: musicspirit

Is it possible to change the length of a note in the score editor?

I thought I saw somewhere that it was now possible to adjust the length of a note in the score editor graphically, i.e. by clicking on the note and somehow adjust its length directly to change it from 1/4 note to 1/8 (for example).
I don't want to do this by going over to the "Length" dialog on the left because I hate having to switch from thinking in terms of music notation and then having to think (temporarily) in MIDI ticks per beat, etc.
I must admit that I'm finding it extremely frustrating to simply enter music into Logic in a score....I thought this was supposed to be one of its strengths but it seems to be providing amazing capabilities at the expense of ease of use for beginners.

dhjdhj wrote:
I thought I saw somewhere that it was now possible to adjust the length of a note in the score editor graphically, i.e. by clicking on the note and somehow adjust its length directly to change it from 1/4 note to 1/8 (for example).
greetings dh... are you into Key Commands? There are two which will help you do the above in a trice:
• Nudge Region/Event Length Right by SMPTE Frame
• Nudge Region/Event Length Left by SMPTE Frame
I set mine to the simple letter o and n
- I click on a note and press o repeatedly.. it grows and grows longer and longer
– I click on a note and press n repeatedly.. it shrinks and shrinks shorter and shorter
All by little increments
If you keep a Piano Roll window open while you do this, you can see the length do this exactly
man, it is VERY quick and handy for changing the length of notes
It really helps to have a view of the midi Piano Roll to cross check the exact length and position of the notes.
Check out the Key Commands:
• Set Next Higher division
• Set Next lower division
These change the note value in the transport bar near the time signature. Your time signature may be 4/4 but the "grid" on which the notes are appear in the Piano Roll could be displayed in quarter, 8th or 16th notes. If you experiment with these commands, then you can match the note lengths easily to the grid display visually (with the above nudge length commands)
Also - you may like to experiment with the following 3 KEY Key Commands:
1 • Nudge Region/Event Position Right by Nudge Value
2 • Nudge Region/Event Position Left by Nudge Value
This will move your selected notes forward in time or back in time according to the
value that is set in the Transport bar - say it is 16ths .. then each press of the key will move the notes a 16th
or if the value is 8th notes, then each press of the key forward or backwards will move the selected notes forward or back by this amount
... amazingly useful when you are taking a whole phrase and pasting it somewhere else, or if say you started to write a phrase in the Score Editor and you started on the wrong beat.. then you just Nudge back and forth
3 • Set Nudge Value to Division
.. this will in a trice change change the Nudge Value to whatever Note division value is set in the Transport bar
HTH and forgive me if I have given you too much information
..problem is I spent too much time in the Transport Bar in Los Angeles last year drinking with the iSchwartz and other Logic reprobrates... you should join us some time

Some Drum notes not displaying in Score editor

I have a problem with a project in getting a correct display of the drum notes in the Score editor despite the playback being OK. I have a mapped drum instrument set up with an identcal structure to that on another project which is working properly. This includes the staff type, the establishment of the drum groups, the relative note positions etc. The difference I have found when comparing the event editor contents between the project which does dispaly correctly and the one the doesn't is that on the one that does, each note is the event list shows the drum type e.g. ride cym, snare, kick etc. whereas as in the project with the display problems, the event display for each note simply shows the word 'Note' even for the parts of the track which do display correctly.
Can anyone advise where the problem could be. I've spent the best part of the day trying to sort this out and now am at a loss as to what to try next !
thanks for any advice.
Swingtones

Hi
Do you have the track correctly assigned to the Mapped Instrument Environment object?
One way is to drag the Mapped Instrument from the Environment window onto the Track Header
CCT

Have the sustain pedal signs on the score editor any effect on the midi?

Hi All,
Whilst working on the score editor I realized I wanted to get rid of the sustain pedal markings without of course affecting the midi playback. Perhaps deleting the pedal sings from the score has no effect on the playback but I need confirmation (of course I need the sustains to perform... just dont want to see them at this stage on score.. too messy)
Thanks for reading.

_Global Format_
Here you can find the settings for page margins, spacing between notes, slanting of beams and format settings.
This window can be opened by:
• Layout > Global Format…
• Key command Settings: Global Format
• Double-click on the page margins in Page Edit view
_Default Pedal Position_
This determines the vertical position of pedal symbols which are created and displayed automatically when you use the MIDI sustain pedal during a real time recording. +If this parameter is set to zero, the recorded MIDI sustain pedal controller events will be hidden in the score.+

How do you draw a tie of two notes in the score editor window

How do you draw a simple tie in the score editor window of Logic Pro 10 ; two quarter notes together, an eighth up-beat accross a bar line into the next measure etc? I can't find the answer in videos, help manual. Please give a step by step how to do it.
It's hard to believe that a program like Logic, that has more information than the New York Public Library, does not have a simple solution for tieing notes. Maybe Logic XI will have one, or "Logicians" can speak to Sibelius for a more "note-worthy" way to solving the problem so that the score editor can be more accessible for editing purposes for those that read and write manuscript. Lew Traver

Hi
Ties are generally automatically created as necessary. Simply adjust the length of the note in the Score (using DurationBars or the Inspector), or in the Piano Roll or Event list.
CCT

Score Editor doesn't display region after cut

Hello, after cutting a small section between locators in the Piano Roll I changed to the Score Editor view.
It will not show the bars after the cut, although the piece plays merrily on ! I moved the playhead to a part after the cut, but still no luck.
How can I change this ?
Kay.

Maybe.... select the two regions at same time... or... Double click on the score window ... but in any case the score is related to the region size.
G

Score Editor bug: syncopating a note disturbs line layout

In the example below, the instrumental part with max 2 bars per line has been created with the Layout Tool, and then the selection saved as a Score Set ( which i hope locks all the page details in place).
[img] http://i364.photobucket.com/albums/oo82/dogliege/Picture3.png [/img]
I then noticed that the red circled note is not displayed correctly - it should be a dotted eighth note and duly click on it with my Syncopate note command.
This then produces the following effect: it crunches up the bars and disturbs the line layout which was already set, cramming 3 bars onto the line above as in the example below.
[img]http://i364.photobucket.com/albums/oo82/dogliege/Picture4.png[/img]
Any solutions appreciated/workflow suggestions.. or is this just "..another L8 Score Editor bug.. wasting more of 2009"
PS Any suggestions as how to get the images to display in the post - as opposed to appear a link? cheers
Message was edited by: musicspirit

i should be enjoying my holiday but i couldn't help myself...
there are a couple of fixes for this.
first, try cutting the regions somewhere to force a redraw.
second, if no form of cutting or reformatting works, try copy and pasting the midi into a fresh autoload on the intel.
particularly if the file was created pre 7.2. there can be compatibility issues between ppc and intel.

Score Editor: request for feature

In preparing parts from a Score one of the most annoying deficiencies of the Score Editor is that it cannot REMEMBER a Score Set Layout and transfer it to another instrument.
To do this for each instrument which has exactly the same lines and spacings ( ie brass or sax section) is extremely time wasting.
Let's say you create a Score Set and call it TRUMPET with all completed line breaks etc, suppose you save that Logic Document as TROMBONE and then try and use the TRUMPET Score Set, for Trombone, Logic will not remember a thing... ie unless you call up the Trumpet Scoreset again.
Does anyone agree with me that to add a saveable Score Set template would be a feature worth requesting in a future version of the Score Editor?
best
MS

Good points. Emagic and Apple have not placed Scoring high on their priority list. I for one, would love to see some enhancements and improvements made to the scoring section
As a sort of work around
You can create additional text styles to use in the score page. On the score page, create a new text styles, call it GRL - define a font and size.
You can create and use markers to cycle and jump to different sections of song. These should work no matter which editing window you are currently viewing (i haven't tried that though)

Score editor: command z, bug?

hi,
I have a score with different time signatures: 3/8, 4/4, 7/7, 5/16, etc.
Every time I press command+Z logic erases nearly all of my time signatures (and the last action I wanted to "undo" it isn't of course the addition of the time signatures logic erases )
Is it a bug?
thanks

Hi Ko be
I just tried opening in L8 an L7 song which has several key signature changes 4/4 to 7/4 to 4/3 and Command + Z doesnt erase them...
I would be pretty sure that your problem is one of those bugs which occurs from a corruption within a Logic 8 document.. but is not a 'generic' L8 defect.
L8 score editor - although improved in some ways - has driven me nuts with really simple weird bugs which L7 never used to do .. eg:
• clicking on a chord symbol ( to bring up the box for editing different elements root/bass note etc) sometimes takes ages to activate - or when it does then the whole part disappears and you are left with a grey page which says " there is nothing in the score editor"
• another intermittent bug is rubber banding a group of chord symbols to cut and paste simple, or drag alter alignment - just does not not work and the chords dont let themselves be selected and go into flashing mode. This is unbelievably irritating especially when you are expecting something so simple to work as before
• the other method of selecting - holding shift and clicking on chord symbols to select a group doesnt work
All this kind of stuff intermittent... ie you never know which Logic Song it is going to start behaving badly in
all best
M S

Score Editor

I'm using my grand piano with midi capability to input data into my Logic express program.
The rhythmic values that I play are always changing as a normal course of improvising. So 1 measure might have triplets, 16ths. *I play 8ths that are played in a swing feel, which should be notated EVENLY!* ARGH!
I'm very confused about how to get these values to display properly in the score editor.
If I play a line into the program with mixed rhythmic values I can't seem to get the score editor to display the result the way I want to see it. Is there a way to do this? An easy way?
It appears that a great deal of editing is required to edit live playing to get a readable score in the score editor. I realize that playing accurately is crucial but it seems that I'm stuck even when I play accurately.
Along the same lines, in a *piano score* can the S*PLIT between bass and treble clefs* be changed from one area of the score to another. Sometimes left hand comping part goe above C3 and sometimes the right hand will go BELOW C3. How to a display this in a piano score would be great to know. Any tips would be greatly appreciated.
Thanks from
Mark Eisenman
[email protected]

That would be pretty slick, since Logic already does guess what chord you're playing. But to the best of my knowledge, the answer is no. I could be wrong, but I don't think Express does that.
However, it appears that Logic Pro might be able to do it, as of 7.1.
Here's Google's cache of the 7.1 notes for Pro
You can insert chords from the global Chord Track into your score, and print them that way. Since Express doesn't have a chord track, it can't do this.

How do override the automatic cross staff beaming in Score Editor?

I created a Piano Midi file and opened it in the Score Editor. In attempt to clean up the notation I asked that the middle C be a "Staff Below Voice". It then lowered the note to the bottom staff and added a Cross Staff Beam connecting the two. How do I get rid of this?
Notice the first beat of measure 3 and 4 are cross staffed. I would like there to be 2 notes in each staff.

Actually, I finally (after hours) figured it out. You have to differentiate what Midi channel you want each staff to be and it will break the two staves apart.

How can i see multi tracks in the score editor

Sorry for this trivial ,but i can not find it
thanks

Hi
Use the "Up a level" arrow top left of the Score Editor (next to the layout menu)
Or select all the regions you need and open a new Score Editor window from the Window menu(Cmd 5)
CCT

How can I write more voices using the score editor?

I'm writing a guitar piece with the score editor but I need to voices; the voice below should be a semibreve and the voice above a dotted minim and then a crotchet, how do I do it?

Hi, here is one way to do this:
http://help.apple.com/logicpro/mac/10/#lgcp8535c140
…..let us know if you need more assistance.
Cheers!

How do I limit the number of measures per line in Logic Pro score editor

I would like to control the number of measures per line in Logic Pro X Score Editor, currently it puts random numbers of measures per line depending on the accumulated lenth of the measures per line, as if looking for "the best fit". Any ideas how to force four measures per line in my finished score?

Thanks, This solved my problem, the only thing I still needed to do was to find out how to open the Global format window. I fugured it out by opening the Score editor window / Layout / global format /then I saw the Max # of barlines. If you just go to the Logic Pro / Preferences then you never get to see the global format window unless you know to hit the "Score Project Settings" button on the bottom. But at least you showed me that there was such a option which limited the number of measures so I keep on trying until I fould how to reveal that option. Thanks !

Playback of repeats in score editor

Similar Messages

Maybe you are looking for